Save this Search
     
Sort by:
  • Posted Date
Fixed Price: Less than $500   |  Posted: 37 minutes ago  |  Ends: 2d, 23h  |   0 Proposals
Need a 3D Model / 3D Render of a prototype I am in the process of building. It's a pocket sized electronic device that could easily fit in a purse or wallet. I am NOT looking for a wire frame or CAD design of this (yet). I need the most high quality render to be able to add this to my website as a product representation of what the final design could look like. I'm looking for someone to provide photorealistic renders in a scene (most likely a countertop) as well as an isolated image. The device is essentially the size of a credit card, but more thick. I had someone do another render on here for a product I currently have in production (  [obscured]  )... he did more than 20 individual renders in multiple colors and staged in multiple settings... he also did a fly by 3D animation as well... he did it for under $450. I say this because I dont want anyone wasting their time (or mine), by quoting me $499. I've watched remotely as these models are made and Ive seen what a good designe...
Category: Product Design       

c****ass
 [?]
Sign in to view client's details.
| c****ass
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 53 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
I am looking for someone to build a prototype from scratch. It is a "mini" PC. the size of the pc will be small.. I would like the parts and the entire prototype to cost less than $50 us dollars. This is for the parts and cost of everything (not labor). I would like the below configuration for the prototype. Please tell me your final cost to make this prototype for me. You will get all the parts (or make it), up to you. but the prototype itself should not cost more than $50 us dollars to make. Please get back to me if you have any questions or please get back to me with a quote to make this prototype and ship it to me in USA PC Configuration Prototype - 1.8 ghz processor or higher - 4GB ram - 32 gb SSD (if expensive maybe flash storage but only If its significantly cheaper) - 1 HDMI (must support 4k+2k resolution) - Minimum 2 and maximum 4 - USB 3.0 connections (if 4.0 USB connection is same price that's fine too) - Ethernet connection - Wifi - 802.11 b/g/n/ (if ac is same ...
Category: Product Design       

k****amm
 [?]
Sign in to view client's details.
| k****amm
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: 1h, 43m ago  |  Ends: 14d, 22h  |   2 Proposals
Need someone to take measurements on bike and existing parts and create 3d CAD drawing for prototyping. Person needs to have possibility to take measurements in Prague, Czech Republic
Category: CAD       
Skills: 3D Modeling, ANSYS, AutoCAD       
Preferred Location: Czech Republic

C****enz
 [?]
Sign in to view client's details.
| C****enz
|    Switzerland
Fixed Price: $500 - $1,000   |  Posted: 2h, 41m ago  |  Ends: 6d, 21h  |   2 Proposals
Hello, I'm looking for someone to help me design/build a prototype, engineer it, and manufacture it (or, at least, connect me with manufacturing options). Rough design attached and additional details below. The product should: -Mount to the wall/ceiling of a residential building (e.g. apartment). I'm envisioning with a suction cup so that it can be easily put up/taken down. Example product with suction cup:   [obscured]  /Mounting-Systems-Suction-Mount-iPhone/dp/B0049SQALM -Have a socket of sorts coming out of the top of it, away from the suction cup/wall and pointing toward the ground, which could hold a laser pointer (if it works to build the laser pointer in, great). This "socket" would also be programmable so that you could set a path for it to to follow (either manually with the user holding the laser pointer in the socket and tracing the movement or with a controller, which could control the socket - I'm thinking blutooth capability but am open to ideas). The...
Category: Product Design       

h****ace
 [?]
Sign in to view client's details.
| h****ace
|    United States
Fixed Price: Less than $500   |  Posted: 3h, 38m ago  |  Ends: 14d, 20h  |   7 Proposals
looking to purchase a 3D printer but can't design CAD files, I have ideas for some unique small things but need help...
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

m****asi
 [?]
Sign in to view client's details.
| m****asi
|    United States
Fixed Price: Less than $500   |  Posted: 4h, 38m ago  |  Ends: 14d, 19h  |   0 Proposals
Please do let me know is there someone who can design an elevator control as per a sample design which can be a base for the same
Category: Product Design       
Skills: Manufacturing Design, Electronics       

m****oor
 [?]
Sign in to view client's details.
| m****oor
|    Kuwait
Fixed Price: $20 - $40   |  Posted: 4h, 40m ago  |  Ends: 14d, 19h  |   11 Proposals
We need drawings to give to a woodworker so he can build this cabinet. We prefer you do the in autocad / sketckup but if you have other software just mention what you would like to use. We DO NOT need renderings ! We need mill work shop drawings in order for the shop to build it. We need 3d views but they will be line drawings with dimensions. Drawings must be in enough detail ( dimensions etc.) so the woodworker can order material and build it . We need plans, elevation details, section and 3d views ( 2 minimum) Please just submit two examples of similar restaurant bars/ cabinets you have done - Please note submissions without a fixed fee will not be considered. Thanks
Category: CAD       
Skills: AutoCAD, SolidWorks, SketchUp Pro, AutoDesk Revit       

s****ner
 [?]
Sign in to view client's details.
| s****ner
|    United States
Fixed Price: $100 - $250   |  Posted: 6h, 40m ago  |  Ends: 14d, 17h  |   8 Proposals
We need someone experience with ExpressPCB (or other PCB CAD software) who can take a paper drawing and re-create it in the software. This is not a difficult job, we just lost the electronic file and need it to be re-drawn from a paper copy with one or two revisions.
Category: CAD       
Skills: AutoCAD, PCB Design       

O****ech
 [?]
Sign in to view client's details.
| O****ech
|    United States
Fixed Price: $500 - $1,000   |  Posted: 6h, 56m ago  |  Ends: 14d, 17h  |   3 Proposals
I am looking for someone who can make a 3D modelling for a building in any software like AutoCAD or SketchUp? etc. Then I need to put this building in the EnergyPlus Software with some new materials and renewables and see the deference in numbers and figures. After making the model and use the location ( using the weather data for the specified project ) in the energy plus software the following are needed: - Calculations of the quantities of existing materials used - Energy consumption - many others ( can be detailed later) then a 3 scenarios are proposed to enhance sustainability and reduce co2 emissions using different materials and PVs.Calculations also required in each scenario. calculations of the differences of the existing conditions and the new conditions are essential. finally a formal report with discussions, charts and justifications is required as a final product with all related files
Category: Civil & Structural       

r****123
 [?]
Sign in to view client's details.
| r****123
|    Ireland
Fixed Price: Not Sure   |  Posted: 7h, 18m ago  |  Ends: 14d, 16h  |   4 Proposals
Need pricing for a cut/fill take-off for grading of a site using PDF planset. The project bids tomorrow at 4PM.
Category: Civil & Structural       

s****eca
 [?]
Sign in to view client's details.
| s****eca
|    United States
Fixed Price: Not Sure   |  Posted: 9h, 47m ago  |  Closed  |   4 Proposals
We had a designer that put all cad drawings into 1 file. We would like them separated out into individual files. Cradling, Bulkheads and RAVE V can be separated into 3 files. For the V Foil Trunnion mounts, we need these into 6 separate files and have them dimensioned. The Rudder Tilt frame can be put into 1 separate file. The WindRider RAVE V Extruded Plastic Core Section for mast, can be put as a separate file. We will want a modification on this as well. Right now there are multiple channels in this with walls at 1.23in, 2.71in, 7.09in we would like these 3 walls removed. We would then like the drawing split into 2 at 5.14in mark. If this goes well we will have potential for more work.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

D****inc
 [?]
Sign in to view client's details.
| D****inc
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: 16h, 2m ago  |  Ends: 14d, 7h  |   31 Proposals
We have three town houses that require 2D CAD modelling, we have plans sketched and need to work with a Draft/arch to model and advise. Must have experience with residential drafting in Australia.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       

r****ati
 [?]
Sign in to view client's details.
| r****ati
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 16h, 55m ago  |  Ends: 14d, 7h  |   0 Proposals
To design a system (including which hardware to use) for optical imaging use to grade fresh cut flowers.
Category: Product Design       
Skills: MATLAB       

d****167
 [?]
Sign in to view client's details.
| d****167
|    Malaysia
Hourly Rate: Not Sure   |  Duration: 7-9 months  |  Posted: 17h, 24m ago  |  Ends: 89d, 7h  |   28 Proposals
CAD drafting and 3D modeling projects in the pipeline. This is for architecture, civil engineering and product design areas. Long-term work. Details will be furnished to hired freelancers.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, AutoDesk Revit       
Preferred Location: Philippines

e****tom
 [?]
Sign in to view client's details.
| e****tom
|    United Kingdom
Fixed Price: Not Sure   |  Posted: 19h, 47m ago  |  Ends: 14d, 4h  |   3 Proposals
I have a list of ingredients for a liquid lipstick. I'm looking to start my own cosmetic line with a wide range of liquid lipsatin clocors. I don't know much about how the ingredients interact, or how much of each I should combine. Will you be able to help me with this. Colors will range from black, red, blue, pink, and nude to name a few.
Category: Product Design       

h****tty
 [?]
Sign in to view client's details.
| h****tty
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 21h, 55m ago  |  Ends: 14d, 2h  |   11 Proposals
The job is for the product design of a pair of sports wrap around sunglasses which contain electronics at the corners before the leg hinges. A single lens design with the nose bridge completely separate from the frame is wanted. The two main electronics modules are approximately 12mm*12mm*3mm to be embedded at the corners of the frames and with 4 buttons also located at the corners. Wiring between the modules needs to run behind the top of the glasses lens. Below shows examples of the desired style:   [obscured]  /item/Men-s-Sunglasses-100-Top-Quanlity-Sports-Sunglasses-fashion-sunglasses-brand-sunglasses-Ride-Glasses-eyeglasses-sports/355777567.html   [obscured]  /oakley-wrap-around-sunglasses/p/itmdtz5s6qjkgxzw   [obscured]  /sports-wrap-around-sunglasses-d548-orange-uv400/
Category: Product Design       

b****eda
 [?]
Sign in to view client's details.
| b****eda
|    Ireland
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Aug 03, 2015  |  Ends: 13d, 22h  |   22 Proposals
I need to take a SOLIDWORKS 2015 model (of 2-3 sub assemblies) and create shop/mfg drawings. -MUST HAVE SW 2015 -Good working knowledge of materials and manufacturing processes.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

S****TOK
 [?]
Sign in to view client's details.
| S****TOK
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Aug 03, 2015  |  Ends: 13d, 19h  |   14 Proposals
We have a project that involves a flight entertainment system. The display is like a tablet on the back of the seats. We have the specs and dimensions. Need a designer to do the industrial design that we would work with an ODM to develop and manufacture.
Category: Product Design       

g****d69
 [?]
Sign in to view client's details.
| g****d69
|    United States
Fixed Price: Not Sure   |  Posted: Aug 03, 2015  |  Closed  |   2 Proposals
I need someone to make some changes to a car in catia v5 following some instructions (dimensions). The freelancer will have to provide me the result as a surface and solid. Moreover I want you to record the entire process and provide me the video. I need a quick turnaround.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, catia v5       

****
 [?]
Sign in to view client's details.
| Client
|    United Kingdom
Fixed Price: $20 - $200   |  Posted: Aug 03, 2015  |  Ends: 13d, 18h  |   11 Proposals
I am looking to build a product made out of molded plastic. It will be fairly similar to the suncast serving cart Link to product can be found here:   [obscured]  /ip/19725646?wmlspartner=wlpa&adid=22222222227014894664&wl0=&wl1=g&wl2=t&wl3=40471114832&wl4=&wl5=pla&wl6=60820257686&veh=sem I just want to vary some features however. Whomever helps me design plans should know I will be taking these plans to a manufacturer so I will need you to understand what they are looking for.
Category: Product Design       

P****ate
 [?]
Sign in to view client's details.
| P****ate
|    United States
Fixed Price: Less than $500   |  Posted: Aug 03, 2015  |  Ends: 13d, 18h  |   10 Proposals
I require a structural engineer to design and calculate wind loadings of a solid screen surface which will be suspended on a frame which I have already purchased. I need a design & calculations to ensure it wont blow over.
Category: Civil & Structural       

b****810
 [?]
Sign in to view client's details.
| b****810
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 03, 2015  |  Ends: 13d, 18h  |   32 Proposals
I need someone to take my conceptual design for product components and create the 3d models to create a production prototype. I will need you to sign an NDA for my design for 2 years. The design is for a robot components
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

c****net
 [?]
Sign in to view client's details.
| c****net
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 03, 2015  |  Closed  |   5 Proposals
I have a simple product drawn up in Google Sketchup and I need it converted to Pro E. This will be used to send to the production facility for manufacturing.
Category: Product Design       
Skills: Manufacturing Design, Pro-E, SolidWorks       

s****rky
 [?]
Sign in to view client's details.
| s****rky
|    United States
Fixed Price: Less than $500   |  Posted: Aug 03, 2015  |  Ends: 13d, 16h  |   18 Proposals
I am assisting an inventor in need of a prototype. Essentially, the design includes modifications to a standard twist on 3-litre soda bottle cap. We intend to source the printing locally but require a .stl rendering.
Category: Product Design       
Skills: 3D Modeling, AutoCAD       

V****ill
 [?]
Sign in to view client's details.
| V****ill
|    United States
Fixed Price: Less than $500   |  Posted: Aug 03, 2015  |  Closed  |   1 Proposal
Need to 2D CAD draftsmans wth experience drawings furniture to make 3 drawings: Mirror Sofa Bed Must be familiar with general furniture construction and joinery.
Category: CAD       
Skills: Architecture, AutoCAD       

y****ddy
 [?]
Sign in to view client's details.
| y****ddy
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job