Save this Search
     
Sort by:
  • Posted Date
Fixed Price: $20 - $200   |  Posted: 1h, 25m ago  |  Ends: 14d, 21h  |   0 Proposals
an active power filter must be designed in simulink. 2 models are needed with 2 different controllers, PWM and hysterisis controlled. A 3 phase source must be used. All calculations and circuit analysis must be explained.
Category: Electrical       
Skills: Simulink       

i****ys4
 [?]
Sign in to view client's details.
| i****ys4
|    Trinidad And Tobago
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 1h, 30m ago  |  Ends: 14d, 21h  |   0 Proposals
Need to Design a 30E EMOD ( ECiggrette) Need a designer who can Design the MOD
Category: Product Design       

p****166
 [?]
Sign in to view client's details.
| p****166
|    United States
Fixed Price: Less than $500   |  Posted: 2h, 26m ago  |  Ends: 1d, 21h  |   1 Proposal
Hello, I have an OrCAD file that I need converted to Altium. I have a legal copy of Altium here, but apparently the OrCAD file is too new for the import wizard to recognize. I need it converted or even just opened and saved in an OrCAD format that is 16.2 or older. I am hoping to get this done tonight so I can get back to work in the morning. Thank you
Category: CAD       
Skills: Altium Designer, OrCAD       

r****ics
 [?]
Sign in to view client's details.
| r****ics
|    United States
Fixed Price: Not Sure   |  Posted: 2h, 53m ago  |  Ends: 14d, 20h  |   3 Proposals
General: Provide layout and construction plans, planting plans, and construction details for a seven building neighborhood per attached plan. This is an existing neighborhood with streets and sidewalks. There will be 12 new patios, a few sidewalks, and a row of parking added to the project. Most of the planting will be new with the exception of a few existing large trees. Specific activities: 1. Develop base sheet layout following detailed instructions (to be provided). Survey will be provided, and 4 base sheets will need to be arraigned on 22 x 34" sheet size at 8th scale. Provide cut lines as required to match the sheets. 2. Develop base information including new sidewalks, patios and planting beds from attached sketch. Hand-drawn dimensions will be provided on PDFs for sizing of sidewalks, patios and parking. 3. Develop Layout and Construction Plans. Hand-drawn detail callouts and labeling will be provided on PDFs for inclusion on the plans. You will need to draw the PDF inform...
Category: CAD       
Preferred Location: United States

W****ign
 [?]
Sign in to view client's details.
| W****ign
|    United States
Fixed Price: Less than $500   |  Posted: 4h, 19m ago  |  Ends: 14d, 18h  |   1 Proposal
The job I need done involves adjusting labels in Vectorworks 2015 with Landmark. This will require adjusting 82 plant object labels on three sheets of drawings. Estimated time of work 3 hrs. Hoping to find someone for longer term help in 2d and 3d landscape drafting / design. To apply: 1. Find the Vectorworks file at:   [obscured]  /file/d/0B725AGccJpZAdWN0eUFQdHdXaVU/view?usp=sharing 2. Open it. 3. Change the tag approach angle of the object to 135. 4. Change the shoulder angle to 180. 5. Customize the name of the plant so that the label displays your name. 6. Save the file. 7. Send me the file or a link to the file. Thank you for your interest!
Category: CAD       

g****and
 [?]
Sign in to view client's details.
| g****and
|    United States
Hourly Rate: More than $50 / hr   |  Duration: 1-2 weeks  |  Posted: 4h, 27m ago  |  Ends: 14d, 18h  |   7 Proposals
I have questions about a project that is in the concept phase and I need advice about the direction I need to take and what would be involved with the electronic development.
Category: Electrical       

J****b42
 [?]
Sign in to view client's details.
| J****b42 *
|    United States
Fixed Price: Not Sure   |  Posted: 7h, 0m ago  |  Ends: 14d, 15h  |   1 Proposal
I have 2014 accounts in draft that need finished the fiqures may need adjusting to finish. I would like the work done asap
Category: Contract Manufacturing       
Skills: Accounting       

w****ton
 [?]
Sign in to view client's details.
| w****ton
|    United Kingdom
Fixed Price: Less than $500   |  Posted: 7h, 44m ago  |  Ends: 6d, 15h  |   1 Proposal
I like to have a European company that can do this for us, not an asian. We need it in one week from now. We need more then one pcs but firs we need to be don with this project. We need skilled peoples that know how to operate cnc machines. We have a fixed price of $250-$350 for this job. We need a floor display made in a cnc machine with carved logos and painted sent to Norway. We need it to be made of MDF/HDF and it need to be painted in gloss paint for furniture with our special colors. Also it need to be black colored glass shelfs under the beverage cooler as you see on the attached drawings. It need to be made well as it need to hold on to the beverage cooler inside + the beverage cans 30kg. Also i like to have the cabinet in one flat pice in the front so that it is not some that points out, se file for design. Add all our logo design on the floor display. The paint to use is : Pantone Pastels Neons Coated 801 C all blue color in glossy furniture paint. Pantone ...
Category: CAD       

l****zkh
 [?]
Sign in to view client's details.
| l****zkh
|    Norway
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 9h, 49m ago  |  Ends: 6d, 13h  |   3 Proposals
Looking for a creative futuristic mind to create a 3D concept model of a strength scale- it will measure the strength of the world's strongest man and maybe a few superheros. In fact, I was thinking of it having sort of a batman feel ] I admire your work, hopefully we can work together. Notably, my project deadline is March 21st. Please send me a reply of your fee schedule at your earliest opportunity ready to work. This is my first time using elance. I hope that you are available to assist in the execution of this cutting edge invention.
Category: Product Design       
Skills: 3D Design       

A****sir
 [?]
Sign in to view client's details.
| A****sir
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 9h, 54m ago  |  Ends: 14d, 13h  |   0 Proposals
Looking for an experienced seamstress to make two dress samples for a London based Bridalwear company and have availability Thursday 5 March and Friday 6 March. Potential for more freelance work. Must have at least 5 years experience making high end, luxury garments, understand how to make bias cut dresses, and can work with silks. Must have space to cut, make and trim garments and have a very good understanding of garments and high end dresses. Work from home and must have own machinery. Sabina
Category: Contract Manufacturing       
Skills: dressmaking, machining, sewing       

S****sem
 [?]
Sign in to view client's details.
| S****sem
|    United Kingdom
Hourly Rate: About $15 / hr   |  Duration: 1-2 weeks  |  Posted: 10h, 48m ago  |  Ends: 13h, 11m  |   17 Proposals
I have complete drawings and BOM for a training/athletic device I am developing. . My current concept also requires welding and machining in addition. I am looking to reverse-engineer this concept into a simpler version with more standard parts and to reduce welding and machining wherever possible. I would even like to consider aluminum or some other material. My goal is to find a solution which falls under $80 range (90% reduction) even for the prototype so that I can reasonably test and potentially produce in larger quantities later.
Category: Product Design       

W****gns
 [?]
Sign in to view client's details.
| W****gns
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 12h, 12m ago  |  Ends: 14d, 10h  |   32 Proposals
I looking for an Autodesk AutoCAD Drafting Professional that can assist me in setting up structural engineering plans. It would mainly consist of taking the Architectural or design plans and converting them into a structural set using my CAD standards which I would provide. You would change all their CAD layers to mine and I would provide initial markups of where lateral and gravity elements would need to be. For example: A typical plan would have roof framing showing and upper walls and shearwalls. I would also like to have standard details cut and I would provide markups for that also. I may give hand drafted sketches of details that I would like drafting to CAD as well. Also, a working knowledge of creating AutoCAD dynamic blocks would be a plus. I have several ideas but don't have the time to get them made. Experience in structural engineering drafting is not required but would be a plus also. I would like to use dropbox to share items back and forth for the most part. May...
Category: CAD       
Skills: AutoCAD, Drafting       

j****216
 [?]
Sign in to view client's details.
| j****216
|    United States
Fixed Price: Less than $500   |  Posted: 13h, 59m ago  |  Ends: 14d, 9h  |   9 Proposals
Hi, i need an expert electronic engineer with minimum master degree. The job is about some tasks related to design and testing models + report. Smart and flexible are the most needed skills. Thank u.
Category: Electrical       

s****wer
 [?]
Sign in to view client's details.
| s****wer
|    Malaysia
Fixed Price: Less than $500   |  Posted: 14h, 16m ago  |  Ends: 14d, 8h  |   28 Proposals
Sketchup basic outdoor area of a cafe using brief drawing and specifications. Include astro turf and seating based on the photo and drawing attached.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

K****yse
 [?]
Sign in to view client's details.
| K****yse
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 16h, 38m ago  |  Ends: 14d, 6h  |   2 Proposals
I need good BIM engineer to design a demonstration model of a multi-story building with different Intelligent building functions taking place on each floor. The whole building is networked back to one point and then to the cloud. For example the first floor may have intelligent lighting with Dali and KNX control, the 2nd floor may have electronic blind control on the windows, the 3rd floor may have all electrical circuits monitored for power consumption, the 4th floor may have BMS controls that are interfaced to our system ..... and so on. Full specification will be written but its essential that the engineer doing this has good graphics skills and understands electrical systems.
Category: Electrical       

M****VAC
 [?]
Sign in to view client's details.
| M****VAC
|    Ireland
Fixed Price: Not Sure   |  Posted: 17h, 18m ago  |  Ends: 2d, 6h  |   8 Proposals
I would like a quote for preparing a material list takeoff for supply bidding. I need a materials for framing, drywall, suspended ceiling, electrical and plumbing. I have architect drawing sample. I have attached a sample floor plan for your viewing. I have full set of architect and mep drawings. Please be located in the USA and have knowledge of code requirements to better understand what materials are required. Must be accurate.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: North America

e****166
 [?]
Sign in to view client's details.
| e****166
|    United States
Fixed Price: Not Sure   |  Posted: 17h, 54m ago  |  Ends: 14d, 5h  |   25 Proposals
We require a single CAD drawing for a fabricated pipe fitting (similar to attached) with dimensions. Drawing needs to include a small inset box with a rendered 3D drawing/illustration (Solidworks or similar). All information provided once awarded (thicknesses, measurements etc). PLEASE NOTE: Drawing is required by 4pm (South Australian time) Thursday 5th March, 2015 at the latest. Please confirm you can submit by this time. Job will be awarded by 9am on the 5th at the latest.
Category: CAD       
Skills: AutoCAD, SolidWorks, 3D Design, 2D Design       

a****ing
 [?]
Sign in to view client's details.
| a****ing
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 20h, 56m ago  |  Ends: 27d, 2h  |   6 Proposals
Our next module requirement is a 45x55mm SMT modem board for the Huawei HU-509 series module in a 145 pin LGA configuration. Modem on top 5x2 2mm pitch Male header, Battery and SIM socket on bottom Pin assignments on header at your discretion. Signals required: RX TX VCC 5VDC Gnd Reset PWR_ON GPIO (x2) Antenna socket on either top or bottom MUST provide power regulation to recommended 3.7V on board. VCC provided is 5VDC No Mic, Spkr, Display or other Telematics, this is a data only application
Category: CAD       

c****ien
 [?]
Sign in to view client's details.
| c****ien
|    United States
Hourly Rate: More than $50 / hr   |  Duration: Not Sure  |  Posted: 21h, 7m ago  |  Ends: 14d, 1h  |   3 Proposals
Chemical Engineer needed for consulting on product idea in the professional automotive space. Here is an example from the project: Specifications needed for contact paper that will identify automotive transmission fluid. Blank contact paper illustrates positive result upon chemical reaction from a basic component in all transmission fluids. The above may be very basic, it is just a simple example of the type of project this is. Further details to follow if you should choose to accept this mission. At this stage, I'm just needing some help assessing feasibility from a Chemical Engineering standpoint. After that, I'll need further consulting on possible materials for the final product. About me: I'm a serial entrepreneur with a background in Technology, Marketing and Marketing Automation. After helping many large companies launch their products and services, I've decided to pursue my own idea.
Category: Contract Manufacturing       
Skills: Chemical Engineering       

A****erd
 [?]
Sign in to view client's details.
| A****erd
|    United States
Fixed Price: Less than $500   |  Posted: 23h, 44m ago  |  Ends: 13d, 23h  |   7 Proposals
I am doing some research, and I need some understanding of how to turn data into a Gaussian Bell Curve. Attached is a data file. The data file is for reviews for businesses. The columns show how many reviews and star ratings each business receives. The rows represent an individual business. QUESTIONS THIS JOB NEEDS TO ANSWER How do we build a gaussian bell curve? We are using Plot.ly as a graphing software. Does it have any function for this? How do we compare gaussian bell curves for two groups of businesses? Please reply back with your math qualifications. Communication skills are very important to me. I am not a mathematical person at all, and I need someone who can answer questions in a way that I can understand them.
Category: Product Design       
Skills: Statistics       

d****bcd
 [?]
Sign in to view client's details.
| d****bcd
|    United States
Fixed Price: Less than $500   |  Posted: Mar 03, 2015  |  Ends: 13d, 20h  |   0 Proposals
Create a Body scrub and body moisturizer. I would like it to be as natural as possible. I would like the body scrub to contain sea salt and coconut oil along with other ingredients that you might suggest. The body lotion should have coconut oil and other healing ingredients.
Category: Product Design       
Skills: Manufacturing Design       

l****ter
 [?]
Sign in to view client's details.
| l****ter
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: Mar 03, 2015  |  Ends: 13d, 19h  |   1 Proposal
we need a part time plc programmer and automation designer for industrial equipment. you must be available to visit the office in downtown toronto
Category: Electrical       

j****134
 [?]
Sign in to view client's details.
| j****134 *
|    Canada
Fixed Price: Not Sure   |  Posted: Mar 03, 2015  |  Ends: 13d, 18h  |   1 Proposal
After a first contractor was incompetently slow and then sadly suffered a stroke literally days before it was hoped this project would finally be functional (he is still out indefinitely with a substantial sum of my money that may be forever gone now), and after a second contractor has now totally flopped with some more of my money while delivering nothing useful in time for an annual trade show (now over), I am now in a position where the patent protection period is half over for this system with nothing to show for it yet and essentially back to square one for finding a suitable contractor(s) to help. Time is now of the essence and becoming more critical with each passing day. This is a golf-related project that the industry needs very badly at this point in order to prevent the clubfitting trade from continuing its horrible and embarrassing performance record and reputation. Some knowledge of and/or interest in golf and the game's future might be a plus, but is not required and m...
Category: Product Design       

k****tuj
 [?]
Sign in to view client's details.
| k****tuj *
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job