Save this Search
     
Sort by:
  • Posted Date
Fixed Price: $20 - $30   |  Posted: 37 minutes ago  |  Closed  |   0 Proposals
DRAW AND MACHINE PART. I AM LOOKING FOR SOMEONE TO DRAW ME THIS PART AND MACHINE IT WITH THE INSTRUCTIONS ATTACHED. NEED DONE ASAP PLEASE CONTACT ME FOR ANY QUESTIONS
Category: CAD       

t****afo
 [?]
Sign in to view client's details.
| t****afo
|    United States
Fixed Price: Not Sure   |  Posted: 1h, 29m ago  |  Closed  |   4 Proposals
I need a technical drawing of a tube that is bent. It requires the level of detail shown in the attached pdf called sample drawing. The company that produces these needs an updated print because their have been quality issues and the engineers need a proper print. The part is simply a 2 inch mild steel tube that is bent at 90 degrees and cut at the tangent lines. A rough drawing is attached. I am by far no expert in tube bending or mechanical engineering so I am relying on you to provide all level of details on the print to produce this piece. The issues we have had in the past is the tube will be deformed, wrinkles on the bend, flat area, distortion, flared end, etc. The tube needs to be perfectly smooth and concentric the whole way throughout, no mars, just a perfect smooth tube. Need a drawing that specifies this in technical terms. Prefer to have this buy the end of the day.
Category: Mechanical       

r****mer
 [?]
Sign in to view client's details.
| r****mer
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 5h, 58m ago  |  Ends: 14d, 18h  |   7 Proposals
Hi there, I am an architect and currently designing 70,000 SF retail building. I am looking for mech/plumbing engineer who can put together HVAC, plumbing permit set. Can you help? Thank you, Benny
Category: Mechanical       

b****956
 [?]
Sign in to view client's details.
| b****956
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: 6h, 8m ago  |  Ends: 14d, 17h  |   6 Proposals
plastic detail design element detail to be add to plastic shell 3-2.5 mm wall thickness parts element to be add: Joggle, glue boss male/female, support rib. gob will be described in detail one axcepted
Category: Product Design       

m****dio
 [?]
Sign in to view client's details.
| m****dio
|    Israel
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: 6h, 11m ago  |  Ends: 14d, 17h  |   0 Proposals
adding plastic detail design element shell 3-2.5 mm wall thickness parts element to be add: Joggle, glue boss mail female, support rib.
Category: Product Design       

m****dio
 [?]
Sign in to view client's details.
| m****dio
|    Israel
Hourly Rate: $15 - $20 / hr   |  Duration: 3-4 weeks  |  Posted: 8h, 53m ago  |  Ends: 14d, 15h  |   12 Proposals
We have a 3D steel model done and we require a skillful draftsman to produce structural workshop drawings extracting all individual component from the 3D model and put them into many A1 size drawings with label of different views, quantity, dimension, materials lists and etc for me to supply it to the steel fabricator for fabrication purposes. Experience in steel profile of a single curve tri-cord trusses with web in between is preferred Please state experience. Preferable in engineering, civil and steel and structural drafting work. Time frame: 3-5 days with 8 hours a day. Please quote best price.
Category: CAD       
Skills: 3D Modeling, AutoCAD       

b****gow
 [?]
Sign in to view client's details.
| b****gow
|    Malaysia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 10h, 19m ago  |  Ends: 14d, 13h  |   29 Proposals
Looking for someone with mechanical design/drafting experience to generate drawings from SolidWorks model. Model is missing tolerances, thread details, title block, etc. Model contains six simple parts. Prefer SolidWorks 2011 if possible. thanks
Category: CAD       
Skills: SolidWorks, Mechanical Design, Drafting       

j****414
 [?]
Sign in to view client's details.
| j****414
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 12h, 4m ago  |  Ends: 14d, 11h  |   24 Proposals
I have drawings started of three exterior elevations of an existing residence and scanned elevations of a proposed residence next door. The drawings are in AutoCAD .dwg format, and need some adjustments using sketches and dimensions that I will provide. The existing residence is drawn in outline on each elevation, and that outline may need to change in shape or dimension on the elevations. The scanned images may need to be edited slightly in order to best demonstrate the relationship between the two buildings. No site visits, no details, no 3D rendering necessary. Consideration will be given based upon proposed price and completion time. Some specifics: - No annotation is necessary, but dimensions must match those shown on .pdf plans, and building elements must align in plan. - I have rough sketches and dimensions that I will provide. These will be used by the drafter to edit the outline of the existing residence as needed. - I will share files with the winning contractor using...
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

Z****922
 [?]
Sign in to view client's details.
| Z****922
|    United States
Fixed Price: Not Sure   |  Posted: 12h, 54m ago  |  Ends: 14d, 11h  |   0 Proposals
We're looking for a talented pattern maker / technical writer / illustrator to make a custom series of patterns for our online store,   [obscured]  -store.com. We have over 200k subscribers to our newsletter with an equal amount of monthly traffic. We hope that your patterns will become a new product line for us and that we can grow together. I attached an example of exactly what I'm looking for but it needs to be tailored to our company and for 100% linen fabric garments. You must be able to: - Write instructions and plan illustrations. - Illustrate instructions, adapting standards when possible. - You must have a strong background in writing and illustrating sewing or crafting instructions. - Advanced sewing and garment construction experience. - Know how to use Illustrator and Photoshop. - Have a portfolio of work demonstrating that you can do this. Please include portfolio work and a fixed fee for the project. Before starting a full project like the example, we will beg...
Category: CAD       

c****lms
 [?]
Sign in to view client's details.
| c****lms
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: Not Sure  |  Posted: 14h, 3m ago  |  Ends: 14d, 9h  |   41 Proposals
Need 3D design of an 8 port plastic air connector from customers hand drawing concept. Some pictures are available.
Category: Mechanical       

i****dge
 [?]
Sign in to view client's details.
| i****dge
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 16h, 17m ago  |  Ends: 14d, 7h  |   8 Proposals
I'm looking for an engineer to help me refine and further develop a prototype for an elaborate phone holder consisting of metal and plastic parts and then produce 100 units for an initial market test. If you are a engineer/designer and have a manufacturing warehouse in Southern California, this would be ideal.
Category: Product Design       

K****j23
 [?]
Sign in to view client's details.
| K****j23
|    United States
Fixed Price: Not Sure   |  Posted: 17h, 44m ago  |  Ends: 14d, 6h  |   15 Proposals
Hi, We need a professional 3D designer who has extensive experience in designing jewelry to work with us on creating new pendant designs and files to send to the manufacturer for production. You will be required to sign a NDA form. All files and designs created will be sent to us via email (or other) as projects are completed. Our line of jewelry is made of pewter or stainless steel. The pendants are similar to lockets so you must have experience in designing pendants that open up to show the inside and holes or cut-outs which may be in the front and back of the pendant. Important: We want someone who has experience and can give us their suggestions as well as take our ideas/pictures and turn it into something unique on their own. This project is for the first pendant design. If we are satisfied with the work, we will have several more designs to follow. Thank you and looking forward to working with the winning bidder! Chris
Category: CAD       
Skills: 3D Modeling, AutoCAD, Rhinoceros 3D, SolidWorks       

i****rks
 [?]
Sign in to view client's details.
| i****rks
|    United States
Fixed Price: Less than $500   |  Posted: 18h, 35m ago  |  Ends: 14d, 5h  |   3 Proposals
it is solar energy coursework ...It is estimated that Glasgow will need 3.2 x 107 MWh per year of electricity in 2017. A plan to meet this demand completely by solar energy is to be evaluated. Assume fixed solar panels of efficiency 20% and the ground reflection (albedo) to be 0.2. 1. Find the ideal tilt and azimuth angle for Glasgow. 2. What is the average daily electricity demand? 3. Which day of the year has the lowest number of daylight hours? How many hours of daylight are there on that day? 4. Between the sunrise hour angle and sunset hour angle, using an Excel spread sheet calculate at equal steps of 7.5o hour angles: (a) The zenith angle. (b) The angle of incidence. (c) The global irradiance. (d) The total irradiance. (e) The time average of the total irradiance (f) The answer from (e) multiplied by the number of daylight hours. 5. Find the total area of solar photovoltaic that would be required to meet the demand on this day. Write a brief report (approx. 1500 words plus any o...
Category: Mechanical       

A****888
 [?]
Sign in to view client's details.
| A****888
|    United Kingdom
Fixed Price: $40 - $100   |  Posted: 18h, 49m ago  |  Ends: 14d, 5h  |   6 Proposals
Project for Company specializing in product designs for small unmanned aircraft. Basic Hire Qualifications Work is done as an independent contractor Must sign a non-disclosure agreement Must sign a contract related to the specifications of the contract Minimum of a bachelors degree in Engineering or 3D design Minimum of one year experience with developing projects using CAD or other compatible software. Highly proficient in working on deadlines, is reliable, dependable and can meet the demands of highly skilled projects. Project involves: Developing a 3D design for a tethering cord for a small unmanned aircraft. Qualifications: Understands the project requirements and develops high quality designs. Develops design layouts for this project using 3D software Uses creativity and originality to develop a unique product Develops primary sketches and models for final selection of product design Selects appropriate materials, engineering standards and parts for project. Presents designs...
Category: Product Design       

d****ARS
 [?]
Sign in to view client's details.
| d****ARS
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: 19h, 22m ago  |  Closed  |   6 Proposals
1.) First do a static analysis of a bar bended by force as shown below (take the values of all the parameters of your choice). 2.)Just clamp the bar from one end and apply the force at the other end. Also output Reaction Force (RF) plot at the clamped end. Second Task Secondly, do a compression test on a sphere. For this, perform a symmetric analysis (Axisymmetric in Abaqus) with two rigid plates on top and bottom of the sphere, as shown in figure below (here also, take the values of all the parameters of your choice).
Category: Mechanical       
Skills: Finite Element Analysis, Abaqus       

n****shk
 [?]
Sign in to view client's details.
| n****shk
|    Germany
Fixed Price: Less than $500   |  Posted: 20h, 5m ago  |  Ends: 14d, 3h  |   4 Proposals
An introduction to basic mechanical methods on aspirated engines. How to diagnose faults and procedures. Almost an idiots guide to fundamental mechanics of the modern car.
Category: Mechanical       

r****dvd
 [?]
Sign in to view client's details.
| r****dvd
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 20h, 25m ago  |  Ends: 59d, 3h  |   1 Proposal
Custom APP for input and computation of 3D geometry including horizontal, vertical and slope distances of triangulated points measured in the field from a baseline. Requires 2D display of outline, slopes and dimensions, including area, perimeter and diagonals, for mobile smartphones, and notebooks. Encrypted transmission of data to host only. English fluency required.
Category: Product Design       
Preferred Location: United States

j****den
 [?]
Sign in to view client's details.
| j****den
|    United States
Fixed Price: Less than $500   |  Posted: 23h, 11m ago  |  Ends: 14d, 0h  |   10 Proposals
I would like a design for a custom pendant for a braclet similar to the example (see attached). The example bracelet is specific to sport fishing and people that like to fish. I would like to design a new bracelet that is for people that love beach living and the beach lifestyles. Here is my logo and website (for inspiration).   [obscured]  / It would also be great if there where a way for me to brand each bracelet to a specific beach. For example on the example where it says "Chasing Fin". I would like to put "Cocoa Beach".
Category: Product Design       

C****ing
 [?]
Sign in to view client's details.
| C****ing
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Mar 30, 2015  |  Ends: 13d, 22h  |   41 Proposals
Design 2D drawings of different existing assemblies according company CAD guideline which describe rules, functions and layouts of 3D and 2D design with Solid Works and Solid Works Inspection. Tasks in this job are: - Set properties to assemblies - Create 2D drawings according company template - Add dimensions for Incoming inspection according existing 2D drawing examples Required preparation for this job are: - Read company CAD guideline - Set all the Solid Works settings to create drawings
Category: CAD       
Skills: 3D, SolidWorks, 2D Design, Solid Works Inspection       

c****kue
 [?]
Sign in to view client's details.
| c****kue
|    Switzerland
Fixed Price: $500 - $1,000   |  Posted: Mar 30, 2015  |  Ends: 13d, 21h  |   9 Proposals
We need to produce Fabrication drawings for the Ductwork detailed on the attached Drawings. Please reply for more information about this project. Regards, Asha Parmar
Category: Mechanical       

d****ant
 [?]
Sign in to view client's details.
| d****ant *
|    India
Fixed Price: $500 - $1,000   |  Posted: Mar 30, 2015  |  Ends: 13d, 17h  |   6 Proposals
development and design of mechanical components. map product assembly drawing and parts; from equipment commissioning to equipment breakdown maintenance record management, including basic information equipment, maintenance books, improvement report and other related file organization to fill in, archive storage, finishing work regularly; of drawings, specifications, product samples are classified management, spare parts of surveying and mapping, modify drawings and confirm and sign; install support plan, acceptance and commissioning new equipment, repair and the maintenance gang on mechanical principle and the main point, solve the problems existing in the installation process; maintenance plan, develop a plan of week, month and year preventive maintenance calendar, the tally prevention plan; the parts maintenance content, ? repair scheme and technical requirements
Category: Mechanical       

l****ian
 [?]
Sign in to view client's details.
| l****ian
|    China
Fixed Price: Less than $500   |  Posted: Mar 30, 2015  |  Closed  |   11 Proposals
This job is to draw an existing building including full dimensions in Revit. It is a two storey house. I have attached the plans with all the measurements. We require: 1 x Site Plan 1 x Lower floor plan 1 x Upper floor plan 1 x Perspective from North East 4 x Elevations Please include A3 Title Blocks on all pages.
Category: CAD       
Skills: AutoDesk Revit       

j****rts
 [?]
Sign in to view client's details.
| j****rts
|    Australia
Fixed Price: Less than $500   |  Posted: Mar 30, 2015  |  Ends: 13d, 14h  |   57 Proposals
We're an acoustic treatment company looking for an engineer to develop a new 3D product design within CAD - or a CAD-like program. Seeking dimensional drawing to depict top, front, and side views, as well as a dimensional-less 3D rendering. We will provide a sketch / physical attributes of the product in development.
Category: CAD       
Skills: AutoCAD, SolidWorks, .NET Framework, 3D Rendering       

O****ics
 [?]
Sign in to view client's details.
| O****ics
|    United States
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: Mar 29, 2015  |  Ends: 13d, 10h  |   9 Proposals
This job focuses on achieving the best design for the product I have in mind. In this case the final design of the product is strongly related to the orientation and design of the chosen electrical components. I need consultation and direction on the electrical design and after that I need to narrow down the best design. I have some concepts in mind, but I need professional input. Only after the final design is reached, I will need a 3D rendering of the product. Details will be disclosed upon signing an NDA.
Category: Product Design       

J****101
 [?]
Sign in to view client's details.
| J****101
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job