Save this Search
     
Sort by:
  • Posted Date
Time Left: Less than 3 days
Fixed Price: $20 - $30   |  Posted: Aug 23, 2015  |  Ends: 1d, 4h  |   1 Proposal
Please have a look at this research paper. I need to solve the differential equation 2.2 to 2.4 in matlab with the boundary conditions in finite difference method using newton iteration. I need results same as the plots shown in the figure 2 and figure 3(in the paper). thanks
Category: Other - Engineering &...       

z****ooo
 [?]
Sign in to view client's details.
| z****ooo
|    Pakistan
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 16, 2015  |  Ends: 2d, 10h  |   5 Proposals
Manufacture and delivery of 1:100 scale model of a proposed apartment building of approx 3,000m2 over 9 levels. Update: Please note this is not for architecture services. It is for the manufacture and delivery of a scale model. The proposed building will be 28 metres high, so the scale model at 1:100 will be 0.28 metres high. Apologies for previous confusion.
Category: Other - Engineering &...       

d****oup
 [?]
Sign in to view client's details.
| d****oup
|    New Zealand
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 16, 2015  |  Ends: 2d, 9h  |   3 Proposals
I am looking to have catalogues setup in cabinet vision with our pricing details Also the program outputs to a biesse I need it to output to a weeke machine also
Category: CAD       
Skills: Cabinet Vision       

e****331
 [?]
Sign in to view client's details.
| e****331
|    Ireland
Fixed Price: Less than $500   |  Posted: Aug 16, 2015  |  Ends: 2d, 5h  |   12 Proposals
I have a product called the Seed Stitcher   [obscured]  /seed-stitcher.html that has a few design issues that are causing problems. 1) After some time of use the drum of spikes becomes bound up with soil and is hard to spin. The drum is made of mold injected polycarbonate and the rest of the Seed Stitcher is steel. I'm thinking this may be fixed with a sleeve around the axle so that the drum turns on a more forgiving surface or the 3 points of contact should be redesigned so the binding does not occur. Open to any material suggestions and or redesign solutions. 2) The handle is designed to come apart for reduced shipping costs, the connection is secured once assembled with a bolt and a welded nut. The problem is the paint gets scraped badly once the handle is inserted over the male side, which will accelerate corrosion. Looking for any material or redesign solution. See pictures attached
Category: Product Design       

L****uru
 [?]
Sign in to view client's details.
| L****uru
|    United States
Hourly Rate: $10 / hr or more   |  Duration: Not Sure  |  Posted: Aug 16, 2015  |  Ends: 2d, 4h  |   18 Proposals
Looking for a product designer experienced with producing CAD files for making production molds for silicone based products. Experience with tech accessories is a plus. You will be given an product example we would like to emulate without infringement. Your cad file will be provided to a silicone mold maker. Experience with designer clip on products is also helpful. knowledge of silicone properties to create a functional product is also a plus. To be considered you must meat the following criteria: 1)Established portfolio on Elance 2)Ability to communicate strongly in english via phone or skype 3)Be capable of starting withing 24 hours of accepting the job 4)Have positive feedback on Elance Please answer the following question to prove you are not a project quoting robot who hasn't read this post: What is 24 divided by 6 = ? We will be making a decision within 48 hours.
Category: Product Design       

d****llc
 [?]
Sign in to view client's details.
| d****llc
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: Aug 16, 2015  |  Ends: 2d, 0h  |   3 Proposals
Looking for existing software library to support monochrome graphics 128X128 LCD using ST7541 controller chip that can be imported into Arduino. Find existing or "port" from AT89C52 example C source code that I already have.
Category: Product Design       
Skills: Electronics, Embedded Systems       

p****nce
 [?]
Sign in to view client's details.
| p****nce
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 16, 2015  |  Ends: 1d, 20h  |   28 Proposals
Hi there We are looking for the best and most talented product designer which can help us to develop outstanding headphone. Also knowledge with production would be very much of help. This will be a very interesting project and will also join the kickstarted funding platform. So if you are up for something interesting and you think you are the right person to help us to create something very special and unique, great!
Category: Product Design       

A****lin
 [?]
Sign in to view client's details.
| A****lin *
|    Germany
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 16, 2015  |  Ends: 1d, 19h  |   4 Proposals
I need something straightforward: selection of ready made, off the shelf components that will work for my device. Given the illumination wavelengths, SNR, FoV, MTF etc. I need a selection of the following components: - sensor - lens - bandpass filter - LED
Category: CAD       

P****nia
 [?]
Sign in to view client's details.
| P****nia
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 15, 2015  |  Ends: 1d, 0h  |   6 Proposals
i need to realize a circuit board with photocam that is activated with photocell and save image in sd card
Category: Other - Engineering &...       

c****llo
 [?]
Sign in to view client's details.
| c****llo
|    Italy
Fixed Price: Not Sure   |  Posted: Aug 15, 2015  |  Ends: 22h, 25m  |   5 Proposals
I looking for a project about carbon nanotubes or graphen or nanoparticals application To be studied by master students We have CVD- SEM- AFM for experimental technique if you can include it. Regards
Category: Other - Engineering &...       
Skills: Nanotechnology       

m****lab
 [?]
Sign in to view client's details.
| m****lab
|    Jordan
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: Aug 15, 2015  |  Ends: 21h, 57m  |   1 Proposal
Hello all, we are eagerly looking for the best qualified Apparel tech pack / technical designer provider. The designs and samples are completed - mostly dresses and tops - we now need them translated into tech packs for production. We are Guangzhou, China and Hong Kong based. Please advise with direct contact information and thank you all in advance. Mervin Sealy
Category: Product Design       
Skills: Manufacturing Design       

m****aly
 [?]
Sign in to view client's details.
| m****aly *
|    United States
Fixed Price: Not Sure   |  Posted: Aug 14, 2015  |  Ends: 12h, 0m  |   9 Proposals
Mess produce wooden bowls with legs (Kava bowl) similar design to what's in the attached picture. 12" diameter and 6" height.
Category: Other - Engineering &...       
Skills: Manufacturing, RapidWorks       

M****ibe
 [?]
Sign in to view client's details.
| M****ibe
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 14, 2015  |  Ends: 10h, 55m  |   18 Proposals
I am seeking for a product design engineer who is confident with optics to work with my idea to create prototypes. Thank you for your time, Lindsey
Category: Product Design       

l****ley
 [?]
Sign in to view client's details.
| l****ley
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 14, 2015  |  Ends: 5h, 2m  |   15 Proposals
Engineer requiring assistance with drafting due to work overflow. Project involves modification of an office floor plan to relocate facilities and then adjust plumbing, electrical, mechanical routing accordingly. Need knowledge of building layout and MEP drawings. US only!
Category: CAD       
Skills: AutoCAD       

b****215
 [?]
Sign in to view client's details.
| b****215
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 10, 2015  |  Ends: 2d, 13h  |   17 Proposals
Hello, We are currently looking for someone to help us with product development and sourcing with our soft good. Currently, we have already built a rough prototype, validated our idea for functionality and usability, and obtained conceptual and technical drawings. We are now looking for someone to help with material selection and choosing a manufacturer who can complete the job in a timely manner at the right cost with quality being a huge factor. Listed below are the requirements for the job: Brief Description of Product: Product is a multi-use, soft goods consumer product that falls within the baby industry. Product must be water-proof and use a 3 layer material. Potential Hire Requirements: Experience with Baby Products (experience in diaper industry or with multi use pads a huge plus), Material Selection Experience, Sourcing Experience, Relationships with quality manufacturers, and Product Development. Please do not apply if you are short on time, have an extremely huge lo...
Category: Product Design       

b****rd1
 [?]
Sign in to view client's details.
| b****rd1
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 28, 2015  |  Ends: 2d, 8h  |   16 Proposals
We need a working prototype of an kitchen appliance. Professional candidate will start with a document describing how the appliance works and design a circuit, prepare a PCB layout and built the prototype. This prototype involves a infrared sensor, thermostat, fan and a hotplate. This product requires two inputs temperature in Fahrenheit or Celsius and distance in inches or millimeters. Based on input values of temperature and volume, output is varied. Output controls the speed of a fan and resistance to the hotplate. More details about the project are available after signing a confidentiality and non-compete agreement. There is room to pay a higher rate or longer hours if justified.
Category: Contract Manufacturing       
Preferred Location: North America

m****shi
 [?]
Sign in to view client's details.
| m****shi
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 16, 2015  |  Ends: 2d, 6h  |   7 Proposals
Looking for a capable team (preferably from India) with proven experience to assist us in developing, prototyping/finding manufacturing partnerships for a uniquely designed waterproof GPS tracking device which communicates with mobile application to notify of location using bluetooth technology. More features to be discussed when chosen and after signing NDA. Looking forward to working long term.
Category: Product Design       
Preferred Location: India/Southern Asia

a****010
 [?]
Sign in to view client's details.
| a****010
|    India
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 02, 2015  |  Ends: 2d, 0h  |   13 Proposals
We need a working prototype of an kitchen appliance. Professional candidate will start with a document describing how the appliance works and design a circuit, prepare a PCB layout and built the prototype. This prototype involves a infrared sensor, thermostat, fan and a hotplate. This product requires two inputs temperature in Fahrenheit or Celsius and distance in inches or millimeters. Based on input values of temperature and distance, output is varied. Output controls the speed of a fan and resistance to the hotplate. More details about the project are available after signing a confidentiality and non-compete agreement. There is room to pay a higher rate or longer hours if justified.
Category: Contract Manufacturing       
Preferred Location: North America

m****shi
 [?]
Sign in to view client's details.
| m****shi
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 30, 2015  |  Ends: 2d, 3h  |   31 Proposals
Design of a product that includes complex folding electro-mechanical mechanism. The challenge is to create a simple compact folding mechanism that will be integrated to form the product. The mechanism should work and should be easy to manufacture. The freelancer will have to create the mechanism. Mechanical Engineering is a requirement Please note that an NDA form should be signed prior to starting work. Thank you,
Category: Product Design       

n****abr
 [?]
Sign in to view client's details.
| n****abr
|    United Arab Emirates
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 25, 2015  |  Ends: 2d, 15h  |   35 Proposals
Hi! I have a great idea that i want to produce. I wanted to know if you can help me engineer, manufacture, and execute this idea. Thank you very much.
Category: Product Design       

A****131
 [?]
Sign in to view client's details.
| A****131
|    United States
Fixed Price: Not Sure   |  Posted: Jun 11, 2015  |  Ends: 2d, 8h  |   13 Proposals
we are looking for someone to help us better formulate our products must be diligent, precise and flexible . we will chose a candidate who has time for us and will follow our procedures
Category: Other - Engineering &...       

i****box
 [?]
Sign in to view client's details.
| i****box
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: May 03, 2015  |  Ends: 1d, 22h  |   15 Proposals
UPDATE JULY 26 I exchanged a couple of emails with the designer of the plan B printer and we came to the conclusion that plan B is still an early prototype, that consumes a lot of time, just to keep it working. So, a more feasible approach seemed to combine a ready made flat bed printer (for example   [obscured]  /products/) with a custom made, height-adjustable powder bed. This next movie gives an idea about what the powder bed should look like (at 0:50):   [obscured]  /watch?v=TSAdjGGhfwo Here?s another movie that gives an idea about the process, when done manually:   [obscured]  /watch?v=2nbtZOolSIY#t=71 *Goal: I should be able to make edible powder based 3D prints. The prints of The Sugar Lab are a great reference here. *To start, I would experiment with sugar and water+alcohol as material and binder combination. *I want to get a fully working prototype out of this project. *An idea for yet a different approach: make an InkShield toolhead for a Zmorph...
Category: Other - Engineering &...       

F****s78
 [?]
Sign in to view client's details.
| F****s78
|    Belgium
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job