Save this Search
     
Sort by:
  • Posted Date
Fixed Price: Not Sure   |  Posted: 3h, 42m ago  |  Ends: 14d, 19h  |   2 Proposals
Inkonova AB (based in Sweden) looks for an individual/freelancer to help us in a project. The project consists on the analysis and CFD simulations for a new design of a high speed competition golfdisc. The new design should have improved aerodynamics in terms of giving more range than a reference commercial disc we provide and stability. The person must have their own CFD software license or use open source programs. Can work remotely from anywhere (we sit in Stockholm though). Start: ASAP
Category: CAD       
Skills: CFD, computational fluid dynamics       

p****lol
 [?]
Sign in to view client's details.
| p****lol
|    Sweden
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 5h, 43m ago  |  Ends: 14d, 17h  |   3 Proposals
Redesign a new line for the attached appliances, 5 at total. This new line should have round shapes. Please give us your best price and delivery time for this jobs request.
Category: Product Design       

J****rfi
 [?]
Sign in to view client's details.
| J****rfi
|    Hong Kong SAR, PRC
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 7h, 12m ago  |  Ends: 14d, 15h  |   0 Proposals
We are a plastic rotational moulding business which is looking to grow via introduction of new products. Rotational moulding is a low volume process and lends itself to products such as water tanks, IBC's, drainage channels, grit bins, material handling products on building sites, street furniture etc...... We will guide you in terms of the products we would like to research and design. Therefore the role will involve: - researching the market for that product i.e. current designs, who are the competition, what are the price points, what is good and bad in terms of existing products in the market; - field research i.e. talking to purchasers of that product and understanding what is good and bad about the existing products in the market. Observing how the products are used; - designing the product using 3D CAD software; - understanding the cost of then producing that part (assistance will be given in this area) and the cost of the tooling; - Writing a report to senior management se...
Category: Product Design       
Preferred Location: United Kingdom

T****y68
 [?]
Sign in to view client's details.
| T****y68
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 8h, 24m ago  |  Ends: 14d, 14h  |   1 Proposal
I would like to design an ethnic fashion doll and then bring that design to life. I need 1 or 2 working models afterwhich I plan to execute a kickstarter campaign to manufacture more.
Category: Product Design       
Preferred Location: North America, India/Southern Asia, Africa

l****aem
 [?]
Sign in to view client's details.
| l****aem
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 9h, 46m ago  |  Ends: 14d, 13h  |   2 Proposals
Innovative design that our startup is focusing on. Looking for a striving individual to help grass root the prototype and possibly join our team going forward. NDA and in-person meeting required.
Category: Product Design       

v****ler
 [?]
Sign in to view client's details.
| v****ler
|    United States
Fixed Price: Less than $500   |  Posted: 9h, 57m ago  |  Ends: 14d, 13h  |   18 Proposals
Make dimension changes to existing STP, DWG files and create new DXF files for lazer cutting. Take existing conveyor design files in stp and DWG and change length, change height of stands, extend motor section and create joiner to new section and new section same as motor section but with out motor - powered from the motor section. Increase roller pitch to 250mm. Create files for Lazer cutting Create Workshop/model/part drawings
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

c****ler
 [?]
Sign in to view client's details.
| c****ler
|    New Zealand
Hourly Rate: More than $50 / hr   |  Duration: 4-6 months  |  Posted: 12h, 0m ago  |  Ends: 14d, 10h  |   9 Proposals
Expertise in multiple machine learning and Bayes methods algorithms Experience with technical computing languages such as MATLAB or R Knowledge of C++, Python, or Java Experience with object-oriented design and implementation Ability to analyze raw data and analyze using gabor transform for speech and vibrational analysis a big plus
Category: Product Design       

r****esh
 [?]
Sign in to view client's details.
| r****esh
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 13h, 24m ago  |  Ends: 14d, 9h  |   0 Proposals
i need some information on how to download matrix cad software. i would really need some help. i would appreciate if you could help. thanks.
Category: CAD       
Skills: 3D, 3D Modeling, AutoCAD, CAD/AutoCAD       

m****ani
 [?]
Sign in to view client's details.
| m****ani
|    United Kingdom
Hourly Rate: $20 - $30 / hr   |  Duration: 1-3 months  |  Posted: 13h, 53m ago  |  Ends: 14d, 9h  |   20 Proposals
Basic Purpose: ?Looking for an in-house CAD Drafter to develop build drawings leading to final product design and production documentation for manufacturing purposes. Position can last for 3-6 months and possibly longer. Located in Plainfield NJ. Position requires person to supply his/her laptop and preferred CAD application. ?Functional Responsibilities: ?Develop build drawings from concepts & conceptual drawings ?Produce designs for manufacturing purposes and CNC equipment ?Work with manufacturing during the assembly process Requirements and Qualifications: Intermediate / Advanced skill level in CAD/3D modeling, VectorWorks and Solid Works a plus ?Intermediate CNC programming skills a plus Excellent organizational skills ?Excellent communication skills. ?Team player Organizational Relationship: ?Position reports to Senior Design Manager. ?Salary: $25/hour plus, depending on skill level.(ID: 6942...
Category: CAD       

j****r3d
 [?]
Sign in to view client's details.
| j****r3d
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 15h, 0m ago  |  Ends: 89d, 7h  |   7 Proposals
Looking for a very talented architect and 3d modeller for the following scope of work: No. 2 new conceptuall design in pla view and isometric 4 rendering for the designed approved elevations with textures with emasurements and floor plan with measurements list of material study used in the design and of course space for revisions as you know stunning final presentation with all view and textures etc.I will need also the CAD FILES Please let me have your quote The job will be developed in phase so the priority right now is to have No. 2 design concept for a jewellery kiosk Ideas for the visual style: CONTEMPORARY - MINIMALIST Preferred colors: WHITE Extra notes: THE JOB IS VERY URGENT - THE PHASE 1 CONCEPTUAL DESIGN
Category: CAD       
Skills: 3D Modeling, AutoCAD       
Preferred Location: Western Europe, Eastern Europe, Middle East & Central Asia, Central & South America

m****ano
 [?]
Sign in to view client's details.
| m****ano *
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 15h, 44m ago  |  Ends: 14d, 7h  |   27 Proposals
I have some hand sketches that I want to have created in CAD format, they are mostly all 2D some I have 3D cutaway views but no real 3D rendering would be required. They are flow and level switches, something like this:   [obscured]  /browser?cid=1256&plpver=1002&prodid=3001068&itemid=&assetid=1122&qlty=&size=&mode=30 The drawings are similar to that but have more detail, showing the bore, thread sizes, etc. As stated they are hand drawn on paper but can be scanned or faxed if you are not near me (Southington, CT)
Category: CAD       
Skills: AutoCAD, AutoCAD 2012, 3D Design, 2D Design       
Preferred Location: North America

c****ksa
 [?]
Sign in to view client's details.
| c****ksa
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: Not Sure  |  Posted: 16h, 20m ago  |  Ends: 14d, 6h  |   12 Proposals
Looking for a resource working on multiple future projects. Part design for injection molding design experience required. Experience in surface modeling in Solid Works a requirement also ProE experience desirable but not required
Category: CAD       
Preferred Location: United States

W****ell
 [?]
Sign in to view client's details.
| W****ell
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 18h, 15m ago  |  Ends: 14d, 4h  |   1 Proposal
I need someone who can create a prototype for me of a piece of lacrosse equipment. I want to design an athletic compression sleeve that runs from the rest to the middle of the bicep that has 2"-4" of relatively thin padding going around the forearm about 1" up from the wrist. This product will be designed for youth lacrosse players whose parents are concerned with safety and have to buy larger pads for their kids so their arms are completely covered up. I just need 1-2 sleeves created in white and black.
Category: Product Design       

a****st8
 [?]
Sign in to view client's details.
| a****st8
|    United States
Fixed Price: Less than $500   |  Posted: 18h, 17m ago  |  Ends: 14d, 4h  |   5 Proposals
Hello, I'm looking for someone who can provide a prototype for silicon template no bigger then a A5 and about 3mm thick. I can provide clearer details later. I don't have any 3D drawings but I have a clear picture, Its pretty simple so shouldn't need one. Once happy with prototype would want to order in bulk starting from 500 upwards so would need quotes on 1. prototype 2. Each unit on min order of 500. We look to bring out more products in the future so would like to find someone capable of a good and well priced job. Thanks, Tom
Category: Product Design       

b****oys
 [?]
Sign in to view client's details.
| b****oys
|    United Kingdom
Fixed Price: Not Sure   |  Posted: 18h, 50m ago  |  Ends: 14d, 4h  |   11 Proposals
CAD Software needed to create 30-second video of a virtual 3D tour inside our upcoming Robotic Farm Domes Please submit your portfolio, samples, and/or links of your work
Category: CAD       
Skills: 3D, Animation       

e****cww
 [?]
Sign in to view client's details.
| e****cww
|    United States
Fixed Price: $500 - $1,000   |  Posted: 19h, 43m ago  |  Ends: 6d, 4h  |   5 Proposals
We need a freight friendly packaging design for our product. The products (four of them) are large, in rough terms 50" x 20" x 20' and weighs 50lbs.We are seeking one solution for the four very similar styled procucts. The product is mostly wrought Iron, but easily bent. There are several accessories that need to be packed with the main product one of which are two glass plates. We do not want to use Polystyrene if possible, not for 'eco' reasons but more about cost. We need to be able to stabilise it for a journey from Europe to the USA by sea, then by truck to parts of the USA. If you have experience in developing simple effective solutions for large scale packaging like this, show us what you have done in this area and tell us how much to make the perfect solution for us. We will happily share more information including full CAD drawings and detail with people who we shortlist for this job.
Category: Product Design       

B****cca
 [?]
Sign in to view client's details.
| B****cca
|    New Zealand
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 19h, 52m ago  |  Ends: 6d, 4h  |   8 Proposals
We need to install a drinking fountain in a wall. It's a simple job--cut the drywall, T off an existed line--that's it. The city wants a more detailed CAD drawing. I have photos of our existing blueprints, tech specs on the drinking fountain and a hand drawn sketch from our plumber. Thank you.
Category: CAD       
Skills: Architecture, AutoCAD, Drafting       
Preferred Location: United States

Y****rce
 [?]
Sign in to view client's details.
| Y****rce
|    United States
Fixed Price: Less than $500   |  Posted: 21h, 36m ago  |  Ends: 14d, 1h  |   20 Proposals
We have a basic design of a machine but would like to have some minor design changes made to make it look more modern. Looking for 3-4 different cosmetic design changes.
Category: Product Design       

I****PRP
 [?]
Sign in to view client's details.
| I****PRP
|    United States
Fixed Price: $500 - $1,000   |  Posted: 22h, 2m ago  |  Ends: 14d, 0h  |   0 Proposals
I need a set of sealed foundation plans for a 40x150x12 Arco steel building with 1:12 roof and columns set at 25' I have sealed construction prints on hand to email.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       

g****1v3
 [?]
Sign in to view client's details.
| g****1v3
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: 22h, 48m ago  |  Ends: 14d, 0h  |   14 Proposals
Job description & duties: - Preparing architectural plans, designing complex layouts based on client requirements or incorporating designs by others. - Preparing rough sketches by studying architectural specifications; creating a picture of the physical, functionality.
Category: CAD       
Skills: 3D, 3D Modeling, 3D Design, 3D Rendering, 2D Design       

S****014
 [?]
Sign in to view client's details.
| S****014
|    United Arab Emirates
Fixed Price: Less than $500   |  Posted: Feb 25, 2015  |  Ends: 13d, 13h  |   4 Proposals
We are seeking to produce a prototype scooter /skateboard and a slim version of a bumper car in Cad and 3 d format. Hence the requirement for a design for the scooter/skateboard that will have 2 circular based cavities under the board and the scooter handle will serve a dual purpose of steering and propelling/propulsion by revving the handle to generate a forward motion movement.
Category: CAD       
Skills: .NET Framework, cad design and 3d       

J****tor
 [?]
Sign in to view client's details.
| J****tor
|    United Kingdom
Fixed Price: Less than $500   |  Posted: Feb 25, 2015  |  Ends: 13d, 12h  |   14 Proposals
I need a chicken coop designed. It should be octagonal, high up off the ground on four post legs. It should have sides that open so I can clean it easily. Something like this   [obscured]  -media-cache-ak0.pinimg.com/236x/53/a5/2f/53a52f3e38988791980e967fbf135fb5.jpg Or like this:   [obscured]  /t/485370/new-octagon-coop-construction-underway-progress But about 3/4 the size. I need the design drawn up on Auto cade with supplies list so I can have a local carpenter build.
Category: CAD       
Skills: AutoCAD       

j****ser
 [?]
Sign in to view client's details.
| j****ser
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 25, 2015  |  Ends: 13d, 10h  |   10 Proposals
Hi There, We based in Asia, Singapore and have an invention that we would like to bring to a prototype stage. The idea is in it infancy, that said, we have a pretty strong understanding of what we want and the product features. I'd be looking for the following services to cover design and development of the product. Hardware Design and Testing, Prototypes etc. Product assessment and market viability. I.P Strategies and Patent viability. SWOT analysis, product assessment. Of course with all of the above we wil be involved at every level. We previously have designed products and patented them, but nothing like the current idea in discussion. The idea would require someone with engineering and technical know how to bring the product to life by engineering and designing a working prototype and ultimately manufacturing. I see on your profile you offer end to end solutions on the engineering side and the technology assessment side, we currently in the process to identify the right p...
Category: Product Design       

R****hpr
 [?]
Sign in to view client's details.
| R****hpr
|    Singapore
Fixed Price: Not Sure   |  Posted: Feb 25, 2015  |  Ends: 13d, 9h  |   18 Proposals
We are looking for someone to work up some clean, elegant and unique 3D floor plans for commercial and Industrial properties we have. Please only apply if: A.You have ample experience with Commercial/Industrial buildings. B. You have samples of Commercial/Industrial buildings that you have worked on. C. You have worked on at least 10 jobs D. You have a least 4.5 stars. Thank you.
Category: CAD       

g****di1
 [?]
Sign in to view client's details.
| g****di1
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job