Save this Search
     
Sort by:
  • Posted Date
Architecture
Fixed Price: Less than $500   |  Posted: 1h, 0m ago  |  Ends: 22h, 59m  |   1 Proposal
I am in need of an exterior design for a single family residence. This is concept only at this time, although I may come back in the future for a floor plan. I will give more details (lot measurements, pictures of neighborhood, etc) once I hire for this project, although here are some rough guidelines: -Square footage needs to be around 4000 total -Two or two and a half stories tall -Needs to fit in well with the street (I will provide images of the street and houses) -Maximum foot print of the house is around 2200 sq ft -We need basic dimensions, but most importantly very high quality renderings/3d modeling of the structure -We have a pretty quick turnaround time. I would need completed drawings in around 3 days from time of hire. I will reiterate.....this requires no work on the inside, no floor plan, no interior design. This also does not require an planning for construction. I simply need nice exterior images of what this site could be so that we can determine how to proceed w...
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

M****lMD
 [?]
Sign in to view client's details.
| M****lMD
|    United States
Fixed Price: Less than $500   |  Posted: 1h, 22m ago  |  Ends: 14d, 22h  |   2 Proposals
Need consultant to improve on current design. Suggest improvement for a cleaner output while using low power supply such as 5VDC.
Category: Electrical       
Preferred Location: United States

j****n66
 [?]
Sign in to view client's details.
| j****n66
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 1h, 28m ago  |  Ends: 14d, 22h  |   1 Proposal
Hello, I need to design interface between Texas Instrument DSP (TMS320C28x or TMS320C3x) and PC thunderbolt2 port. All what I have a laptop and DSP and I need to communicate between them bi-directionally. I need someone to design pcb, manufacture it and test it. Can you help ? Regards Sam
Category: Electrical       

G****te2
 [?]
Sign in to view client's details.
| G****te2
|    Australia
Hourly Rate: $30 - $40 / hr   |  Duration: 1-2 weeks  |  Posted: 2h, 2m ago  |  Ends: 14d, 21h  |   0 Proposals
I'm looking for a few hours of time from a logistics expert. I have a product that is 11" x 3" x 2.5" weighs 15oz. and comes in 3 colors. I'm looking for help on the vagaries of GS1 codes, sizing/sourcing boxes, labelling etc. No real design work just consulting and telling me what needs to be done.
Category: Product Design       
Skills: Logistics & Shipping       
Preferred Location: United States

t****bke
 [?]
Sign in to view client's details.
| t****bke
|    United States
Fixed Price: Not Sure   |  Posted: 2h, 43m ago  |  Ends: 14d, 21h  |   4 Proposals
Two small PCB housings are to be designed for injection moulding. Approx. dimensions are 30x10x10 mm. One housing will need to be full IP-68 rated. Please reply with your best quote and past work that displays your skill set. Looking for someone who has past experience with magnetic chargers and waterproof casing designs.
Category: Product Design       

U****ONS
 [?]
Sign in to view client's details.
| U****ONS
|    Australia
Fixed Price: Not Sure   |  Posted: 4h, 49m ago  |  Ends: 14d, 19h  |   5 Proposals
Hello, Can you please tell me how much it will be to get you to do elevations for: Guest sink along wall, floor Toilet walls and floors Kids bathroom everywhere and walls and floors Our bathroom everywhere and walls and floors Laundry everywhere and walls and floors our walk-in my office everywhere and walls and floors I have attached an example of what I mean. Its to be in black and white and must show all windows, doors and flooring/tiles or floors boards or carpet and all must fit to the sizes on the house plan. I will send a section each time for you to do once each one gets sent back. I need the guest area, kids bathroom, kids toilet, our bathroom all done in the next two days as I have a tiler waiting for it. Thank you
Category: Architecture       

N****you
 [?]
Sign in to view client's details.
| N****you
|    Australia
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 6h, 42m ago  |  Ends: 14d, 17h  |   10 Proposals
Hi, I'm interested in getting a simple circuit for prototyping and production. It has a 12 volt input. 12 v high will cause a transistor to switch and close a circuit. 12v low will open the circuit. There will be two connectors, Molex 2510 2 pin (mates to this:   [obscured]  /product/20137115330401.jpg) that connects the 12v wires, and a second of the same connector that will be the open/closed circuit. The only components needed are the transistor and a resistor. I need the files that are ready for a prototyper to produce.
Category: Electrical       

N****an5
 [?]
Sign in to view client's details.
| N****an5
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: 6h, 44m ago  |  Ends: 14d, 17h  |   19 Proposals
I will give you a pdf or powerpoint and I will need you to complete the drawings in a professional CAD file format that you can convert to pdf and send to me. You must have civil engineering skills and knowledge to do the work.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

d****tmf
 [?]
Sign in to view client's details.
| d****tmf
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 7h, 14m ago  |  Ends: 14d, 16h  |   2 Proposals
I have 2 microstation files for a project that is over 200 miles long. I would like to have the file converted into a kmz or kml file so I can view the information on Google Earth.
Category: CAD       
Skills: AutoCAD, Microstation, CAD/AutoCAD       

t****otz
 [?]
Sign in to view client's details.
| t****otz
|    United States
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: 8h, 5m ago  |  Ends: 14d, 15h  |   2 Proposals
We are a new company established to bring to market an innovative concept of a connected device. We have built a first prototype including electronics and smartphone app and are now moving to the next step, object of this job. The goal is to create a connected fitness device that is made of 3 parts: - a part hosting the electronics (the electronics itself is not included in this job) - an inflatable part over a plastic frame - a flexible arm linking the 2 parts I have made a first 3D prototype of those 3 parts and will provide the .STL files. The job consists in designing the 3 parts, including the way the parts are attached together. The bidder must be in the San Francisco Bay Area as face-to-face meetings are expected to be necessary. The bidder is also expected to sign a confidentiality clause for this job, above and beyond the default Elance clauses.
Category: Product Design       
Preferred Location: United States

j****and
 [?]
Sign in to view client's details.
| j****and
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 8h, 14m ago  |  Ends: 14d, 15h  |   26 Proposals
Hi, Need an exterior design and render for a six story stucco building 21' x 55' will explain more details later something like the attached style
Category: Architecture       
Skills: 3D Design       

B****ign
 [?]
Sign in to view client's details.
| B****ign
|    United States
Fixed Price: Less than $500   |  Posted: 8h, 32m ago  |  Ends: 14d, 15h  |   6 Proposals
We're looking for an electrical engineer to design a component that will be integrated into clothing. This product has never been invented before and I would like to see your portfolio. Once I see the portfolio, then we can discuss the product. Please submit your portfolios.
Category: Electrical       

a****inc
 [?]
Sign in to view client's details.
| a****inc
|    United States
Fixed Price: Not Sure   |  Posted: 10h, 4m ago  |  Ends: 6d, 13h  |   13 Proposals
I need you to make a 3d CAD file (igs) for a part that will be manufactured by injection plastic The part is not very complicated, it will be similar to the piece on the attached picture. It is about 35x20cm I need someone that has already made parts to be manufactured injected plastic so he knows the rules that need to be applied to the part in order to make it manufacturable and keep the mold cost reasonable.
Category: CAD       
Skills: Mechanical Design, Manufacturing, 3D Design, CAD       

E****aii
 [?]
Sign in to view client's details.
| E****aii
|    United States
Fixed Price: Less than $500   |  Posted: 10h, 15m ago  |  Ends: 14d, 13h  |   2 Proposals
Hello, I am looking for someone to design 2 minimalist wallets. I would like them to be simple but chic. Simple is better. I would like them to have 3 card holders and a sleeve for cash. I would like them done in a computer aided design program such as AutoCAD.
Category: Product Design       

n****y27
 [?]
Sign in to view client's details.
| n****y27
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 10h, 21m ago  |  Ends: 29d, 13h  |   21 Proposals
Looking for someone to help draft plans and do rendering for Beach House. Has a specific footprint and size because of lot size. Also want to incorporate solar and go green as much as makes sense. The house is in the Dominican Republic and is part of a project so if you get the house design right and the way we need it. Than we will need a master plan and additional work done. We finally after month's of waiting have the sub dividing of the property done and can go ahead with plans.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

B****adr
 [?]
Sign in to view client's details.
| B****adr
|    Dominican Republic
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 10h, 45m ago  |  Ends: 14d, 13h  |   1 Proposal
Hi. I'm creating a hybrid (casual/day hike) backpack and I am looking for help in getting a pattern and prototype manufactured. I have initial sketches/drawings but would like to work with a professional who could provide the following: (a) Assist in updating design drawings to include technical features; (b) Provide creative suggestions on design; (c) Locating a manufacturer who will (i) make a prototype, (ii) provide patterns, and (iii) provide competitive pricing; and (d) Work with such manufacturer to get the prototype completed.
Category: Product Design       
Skills: Product Design       

K****nch
 [?]
Sign in to view client's details.
| K****nch
|    Canada
Fixed Price: Not Sure   |  Posted: 10h, 59m ago  |  Ends: 14d, 13h  |   2 Proposals
I have 14 load cells that I want to read through a National Instruments 9205 analog input module. I need a circuit with a low-pass filter and amplification to a level readable by the NI module. I've tried to build a circuit myself, but am having all kinds of troubles. I've started with an RC low-pass filter which feeds an op-amp to boost the signal to within the common mode range of an in-amp. Here's what I'm working with: * Single supply voltage source, 9 V, provides power to the op-amp and the in-amp and also excites the load cell * Load cell (4-wire, full-bridge) that generates up to 27 mV [3 mV/V excitation] when fully loaded (2500 lbs). So, if I lean on the load cell with 100 lbs, I expect the load cell to put out just 1.08 mV. * Simple R-C low-pass filter. * LM358 op-amp with a common mode input including ground (necessary due to the low voltage output of the load cell under light loading). I'm running this as a non-inverting op-amp. * INA131 in-amp with built-in gain of 100. ...
Category: Electrical       
Preferred Location: United States

j****orn
 [?]
Sign in to view client's details.
| j****orn
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 11h, 27m ago  |  Ends: 14d, 12h  |   8 Proposals
I need construction documents done in Sketchup and Layout. I have a working model created in Sketchup that needs to be either cleanup up or re-created properly. Project is an four story home addition. ICF walls, pan-decked concrete floors, wood roof support and roof. Rain-screened wood siding cladded. Very simple redundant floor plans. Existing small one story with basement house building is already modeled. Site plan is finished. Engineer approved calculations for foundation footings and walls. Soon will have wall calcs. After that roof support calcs. First phase: Generate foundation construction docs. Second phase: Generate elevations and wall detail construction docs with existing roof designs. Third phase: Generate elevations and roof detail construction docs with engineer approved roof designs. I would like to have phase one done right away. Phase two within 2-3 weeks. Phase three in 4 weeks. Thank you for your interest. Roger
Category: Architecture       

r****gen
 [?]
Sign in to view client's details.
| r****gen
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 11h, 31m ago  |  Ends: 14d, 12h  |   0 Proposals
Development of electric projects (Residencials, Building Services and Automation), Hydraulic Project, Sewage Project, Architecture Projects and technical drawings from various fields.
Category: CAD       
Skills: Electrical Engineering, AutoCAD 2012       

a****dim
 [?]
Sign in to view client's details.
| a****dim
|    Brazil
Fixed Price: $100 - $3,000   |  Posted: 12h, 10m ago  |  Ends: 2d, 11h  |   10 Proposals
This job is to detail the hot rolled steelwork as shown on the enclosed engineers drawings. It is a simple column and beam steel frame for the UK. Please note that none of the 'internal' mezzanine floor steel is to be included Must be detailed in Tekla 18 or 19 Base plate, shear and moment connection designs will be provided The contract will be split into 4 stages: 1. Stick Model and Prelim GA's (General Arrangement Drawings) 2. Connecting the model 3. Alterations and producing construction GA's 4. Producing fabrication information, including editted fabrication drgs and marking plans etc The total program for this contract can be no more than 3 weeks. Payments will be split throughout the project and will be released within 48 hours of satisfactory completion each stage. A daily progress report, Tekla model and BIM model must be sent everyday so that progress can be monitored The latest Tekla working model and GA's must also be available on request. Thank you
Category: CAD       
Skills: Tekla Structures       

P****mes
 [?]
Sign in to view client's details.
| P****mes
|    United Kingdom
Hourly Rate: $30 - $40 / hr   |  Duration: 4-6 months  |  Posted: 12h, 55m ago  |  Ends: 14d, 11h  |   6 Proposals
AM LOOKING FOR A CANADIAN ARCHITECT FAMILIAR WITH BUILDING CODES AND VERY GOOD IN 3D RENDERINGS LOOKING FOR A DESIGN OF A RESTAURANT. DETAILS WILL FOLLOW IN PRIVATE MESSAGE JOB IS URGENT NEED TO START IMMEDIATELY I AM LOOKING FOR A VERY EXPERT AND "PICKY" ARCHITECT CAREFUL TO DETAILS AND PERFECT FINAL PRESENTATION.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD, 3D Rendering       

m****ano
 [?]
Sign in to view client's details.
| m****ano *
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 14h, 33m ago  |  Ends: 14d, 9h  |   4 Proposals
In the design and development stage of building a generator. ? Providing sound and profound knowledge covering topics in relations to electrical and mechanical engineering. ? Providing suggestion, advice and methods towards improving design and development of electrical devices/product supported by factual or documented references. ? Show support to the ongoing development and design of electrical devices towards building, testing, testing and expansion. ? Putting together a learning material in form of any media to teach at a beginner's level, and advance if necessary to bring the learner to an understanding from basic to satisfactory understanding. ? You may be required to travel to china (All expense paid for), but not necessary as communication may continue via video conversation. ? Be able to identify errors, flaws or potential risk in product design and development from sketch, design and development process before testing phase.
Category: Electrical       

o****000
 [?]
Sign in to view client's details.
| o****000
|    United Kingdom
Fixed Price: $50 or less   |  Posted: 19h, 4m ago  |  Ends: 1d, 4h  |   25 Proposals
I need some small changes made to a drawing for a wire rack, as hand drawn onto drawing attached. The original drawings are 3D, I think they were done on SolidWorks. I can provide an .STP file. The finished drawing to be provided as .STP file as well as 2D and 3D drawings in .PDF format.
Category: CAD       
Skills: 3D, SolidWorks       

M****guy
 [?]
Sign in to view client's details.
| M****guy
|    Australia
Fixed Price: $1,000 - $5,000   |  Posted: 20h, 28m ago  |  Ends: 14d, 3h  |   9 Proposals
Detailed Scope of Work includes amendments and additions including (detailed brief will be given to candidates) 1. MEP Drawing Amendments On completion the drawings should be of quality to submit to an MEP contractor who will produce detailed routing and quantities. i) Include approx elevation of all fittings in MEP (currently only floor plan) ii) Amend Electrical layout based on Interior Design consultant advice iii) Amend Plumbing drawings based on Interior Design consultant advice Note: Due to framing system plumbing cannot fit in wall cavity so require external channels to be added (must coordinate with client in briefing) iv) Amend HVAC based on Interior Design Consultant Advice Note: Ceiling fans must be bracketed to structure Note: Use of multi split AC units recommended Note: Vents must be incorporated into panel drawings and BM as an item Note: External unit position and box required 2. Architectural Drawings (1:50 and 1:100) These are presented to suppliers/contractors fo...
Category: Architecture       
Skills: Architecture, AutoCAD       

C****bok
 [?]
Sign in to view client's details.
| C****bok
|    Indonesia
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job