Save this Search
     
Sort by:
  • Posted Date
Time Left: Less than 24 hours
Fixed Price: $50 - $80   |  Posted: May 29, 2015  |  Ends: 11h, 52m  |   5 Proposals
need expert in math - communication engineer in order to derive some formulas more details as in attached file.
Category: Electrical       

m****lab
 [?]
Sign in to view client's details.
| m****lab
|    Jordan
Fixed Price: $100 - $3,000   |  Posted: May 28, 2015  |  Ends: 19h, 10m  |   14 Proposals
Stanmore Roof This job is to detail the hot rolled steelwork as shown on the enclosed engineers drawings. It is a curved roof structure for the UK. Must be detailed in Tekla 18 or 19 Candidate MUST have good experience in detailing curves in Tekla Base plate, shear and moment connection designs will be provided The contract will be split into 4 stages: 1. Stick Model and produce Prelim GA's (General Arrangement Drawings) 2. Connecting the model 3. Alterations and producing construction GA's 4. Producing fabrication information, including editted fabrication drgs and marking plans etc The total program for this contract can be no more than 3 weeks. Payments will be split throughout the project and will be released within 48 hours of satisfactory completion each stage. A daily progress report, Tekla model and BIM model must be sent everyday so that progress can be monitored The latest Tekla working model and GA's must also be available on request. Thank you
Category: CAD       
Skills: Tekla Structures       

P****mes
 [?]
Sign in to view client's details.
| P****mes
|    United Kingdom
Hourly Rate: Less than $10 / hr   |  Duration: 7-9 months  |  Posted: May 24, 2015  |  Ends: 21h, 47m  |   21 Proposals
I am looking for a professional able to: - modify/amend electronic schematics - optimize BOM - route PCB up to 6 layers with ability to comply with standard pool manufactring (Eurocircuits.com) - generate GERBER files, loaded into manuffacturer web site with no errors - knowledge of impedancy, currents, complex components required. Regards
Category: Product Design       
Skills: Electronic Design, PCB Design, gerber       

D****MY1
 [?]
Sign in to view client's details.
| D****MY1
|    Spain
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 23, 2015  |  Ends: 8h, 11m  |   6 Proposals
We have a spinning display (prototype) which has a 7" display, motor to spin our product and using an Olimex board to run the video / audio. We have successfully prototyped this and now, we need a freelancer to optimize this design and prepare it for manufacturing as the cost is too high using the Olimex board and the associated 7" LCD/controller board. We are using a standard microwave oven motor to independently spin our product and this is directly connected to a switch and powered directly to an AC power source. The motor turns 360 degrees and then automatically reverses since we have created a mechanical stop. The way the unit will function is as follows: 1) User will turn on a power switch located on the bottom of the display 2) Display will provide power to the motor which will start spinning and simultenously power the microcontroller board to run the OS (i.e. Linus/Android). 3) OS will initiate and the user will see a splash screen which will allow them to e...
Category: Electrical       

p****one
 [?]
Sign in to view client's details.
| p****one
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 16, 2015  |  Ends: 22h, 57m  |   2 Proposals
Very experienced and proficient Cobbler/Shoemaker with own work space and all necessary tools to make 4 pairs of a hybrid sneaker. Must be able to interpret and translate original completed prototype from Solid Works. The original design was created in Solid Works around a custom last that we have. Must be able to use and manipulate different materials, sewing and adhesive techniques. We prefer to work with the contractor so the closer to South Florida the better.
Category: Product Design       
Preferred Location: United States

3****RMG
 [?]
Sign in to view client's details.
| 3****RMG
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 16, 2015  |  Ends: 22h, 42m  |   2 Proposals
Seeking a South Florida ELECTRICAL ENGINEER who is extremely proficient, experienced, motivated and reliable, talented to HELP complete a hardware and motherboard for a promising biomedical/SOS prototype device. Must have own work space, tools and appropriate software. Maximum available hours available required to meet expedited testing deadline. The electrical engineer will - design, implement, and simulate a PCB board for a small biomedical device using a schematic software, including parts list. - The PCB board must have RF and bluetooth communication capabilities and include a transceiver. - Participate in project planning, design reviews and risk assessments. Qualifications: Candidates must have extensive prior experience and knowledge of the following: - Actual Experience with modifying and manipulation of PCB boards for use in small devices - Geometric Dimensioning and Tolerancing (GD&T)
Category: Electrical       
Preferred Location: United States

3****RMG
 [?]
Sign in to view client's details.
| 3****RMG
|    United States
Fixed Price: Not Sure   |  Posted: May 16, 2015  |  Ends: 19h, 55m  |   5 Proposals
We are looking for someone who can help us design a bag for a product idea we have. We have already had a prototype, but the company could not take it further, i.e. improve on the design, thus we chose to look elsewhere for more specific design drawings that will provide a manufacturer with explicit instructions. We are also looking for a person or design team with ideas to incorporate into the design, especially if some idea might make the design with some unique feature in that a patent could be filed. (This is not a deal breaker, as we have not been able to think of a design that would make it patentable, but just throwing this out there for creative minds.) Originally, the design was a roll-up type bag that was impressive when opened from the top and the length of contents became visible (the wow factor, and made the buyer understand how wonderful the bag really is). The interior of the bag was clear with several zippers. This design worked well, but no real "pizazz,"...
Category: Product Design       

M****zit
 [?]
Sign in to view client's details.
| M****zit
|    United States
Fixed Price: Not Sure   |  Posted: May 16, 2015  |  Ends: 19h, 34m  |   3 Proposals
We are looking for someone who can help us design a bag for a product idea we have. We have already had a prototype, but the company could not take it further, i.e. improve on the design, thus we chose to look elsewhere for more specific design drawings that will provide a manufacturer with explicit instructions. We are also looking for a person or design team with ideas to incorporate into the design, especially if some idea might make the design with some unique feature in that a patent could be filed. (This is not a deal breaker, as we have not been able to think of a design that would make it patentable, but just throwing this out there for creative minds.) Originally, the design was a roll-up type bag that was impressive when opened from the top and the length of contents became visible (the wow factor, and made the buyer understand how wonderful the bag really is). The interior of the bag was clear with several zippers. This design worked well, but no real "pizazz,"...
Category: Product Design       

M****zit
 [?]
Sign in to view client's details.
| M****zit
|    United States
Fixed Price: Less than $500   |  Posted: May 16, 2015  |  Ends: 19h, 15m  |   3 Proposals
single dwelling residential, all architectural drawings done, looking for structural engineering/electrica/plumbing and rest of the things to do around 250sm it is light weight steel framed structure with cladding the project is fixed budget -$50
Category: Architecture       

g****555
 [?]
Sign in to view client's details.
| g****555 *
|    India
Fixed Price: Less than $500   |  Posted: May 16, 2015  |  Ends: 13h, 49m  |   17 Proposals
we want to have USA/ EU style design of the wireless charger requirement 1 Apple style cute small design 2 3 picuture of different angle of the product we actually not so confident in the design of the outside appearance of the product, we will do the PCB according to your case design, we don't need an accurate CAD design in a word, we want to to show our new product to our potential customer, so we want our customer to know what the end product looks like from front view, side view and back view, we want to see different angle, we want a unique product attached is some pictures from amazon for your reference
Category: Product Design       

e****126
 [?]
Sign in to view client's details.
| e****126
|    China
Fixed Price: $20 - $25   |  Posted: May 16, 2015  |  Ends: 11h, 12m  |   5 Proposals
This is the detail Use simulink to create Souce of information (BMP color image and WAV audio file)-->transmitter with 16 QAM modulation ----->Noisy AWGN channel, Rayleigh multipath fading channel and a Rician multipath fading channel-----> receiver with 16 QAM demodulation------>out put after demodulation should be written to the file for both BMP and WAV audio file on the desktop. This is to check the affect of the SNR to image and audio file. The color image after input should be split to RGB and multiplex with Audio file and then perform 16 QAM modulation and pass through noisy AWGN channel and then perfom demodulation and at last it should be demultiplex back to get image and audio file. This image and audio file should be save on the desktop.
Category: Other - Engineering &...       
Skills: Electronics, MATLAB, Simulink       

r****ree
 [?]
Sign in to view client's details.
| r****ree
|    Thailand
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 16, 2015  |  Ends: 9h, 59m  |   6 Proposals
See rack elevation. Would need drawings changed based on comments for rack elevations. Also drawings sized to full set drawings and company logo placed on all drawings. Attached are the rack drawings The drawings for the racks are done in Visio. The main rack for the recorder would be A98. So moving recorder from B97 to A98. Amps that need to be grouped together in A97 are Lab Gruppen C48:4 Lab Gruppen C48:4 Lab Gruppen FP4000 Lab Gruppen C28:4 Lab Gruppen C28:4 Lab Gruppen C48:4 Lab Gruppen E12:2 Lab Gruppen E12:2 Lab Gruppen C28:4 Lab Gruppen C28:4 Lab Gruppen C28:4 Lab Gruppen FP4000 See all changes on drawings.
Category: CAD       

T****MGM
 [?]
Sign in to view client's details.
| T****MGM
|    United States
Fixed Price: $200 or less   |  Posted: May 15, 2015  |  Ends: 7h, 48m  |   1 Proposal
We need someone who is specialised in 1) Nanowire circuit 2) TFT 3) Material Engineering Our product is a display on transparent material. Individual bidder is preferred, with a Master Degree or above in Electronic Engineering. You will need document revision on R&D methodology, content and specifying the deliverables and deliver before next Wednesday. The payment will be due at satisfying the proposal after review of theTechnical Department.
Category: Electrical       

j****103
 [?]
Sign in to view client's details.
| j****103
|    Hong Kong SAR, PRC
Hourly Rate: $40 - $50 / hr   |  Duration: Not Sure  |  Posted: May 15, 2015  |  Ends: 7h, 47m  |   20 Proposals
Looking for a programmer experienced working with the CC110L sub-1GHz RF chip from TI (or similar RF chips). It interfaces to an AVR MCU via SPI. Only need very simple functionality (press a button on transmitter, matching LED illuminates on receiver). Skills required: CC110L, AVR programming, SPI
Category: Electrical       
Skills: Embedded Systems, Atmel AVR, Embedded C       

J****lEE
 [?]
Sign in to view client's details.
| J****lEE
|    United States
Fixed Price: Not Sure   |  Posted: May 15, 2015  |  Ends: 5h, 39m  |   12 Proposals
I need a writer who is willing to write two articles on each keyword, approx. 15 keywords. Some of these keywords may include: plumbing, water heater, tankless water heater, sump pump, gas water heater, electric water heater, solar water heater, leak detection, Orange County plumber service, toilet repair, drain cleaning, leaky faucet, Orange County emergency plumber, water heater installation, drain snake. These articles are for a company called Platinum Plumbing in Orange County, California (Anaheim). Each article will be used soley for SEO purposes so the keywords need to be strong and relevant, occuring frequently throughout the articles. Each article should be anywhere from 300-500 words minimum.
Category: Other - Engineering &...       

Z****rie
 [?]
Sign in to view client's details.
| Z****rie
|    United States
Fixed Price: Less than $500   |  Posted: Apr 29, 2015  |  Ends: 19h, 59m  |   24 Proposals
Hi there, we need an awesome AutoCAD geek for designing a little piece of hardware with a PCB inside. The model will then be used for molding (Polycarbonate) We believe this job won't take longer than a few hours. We know, we know, it's just a small job, but hopefully there's gonna be more for the future. Details on request.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

S****men
 [?]
Sign in to view client's details.
| S****men
|    Germany
Fixed Price: $5,000 - $10,000   |  Posted: Apr 25, 2015  |  Ends: 20h, 36m  |   10 Proposals
Looking for a company to design and engineer an Iwatch. Please be sure to submit prove of related work you've completed in the past. I will also be open if you have a similar project that you are looking for partner of funding for. Thank you.
Category: Other - Engineering &...       
Skills: 3D Systems, 3D Scanning, 3D Printing       

c****o10
 [?]
Sign in to view client's details.
| c****o10 *
|    United States
Fixed Price: $500 - $1,000   |  Posted: Apr 20, 2015  |  Ends: 20h, 0m  |   20 Proposals
I am looking for someone who has deep experience in plastic molding, extruding, design and fabrication. I need to develop a product that is able to slide over a piece of rectangular steel tubing (with fairly tight tolerance) to protect it from drop impact and abrasion. The steel is 6"x3"x1/4" wall thickness with radiused corners. An example of the steel is here:   [obscured]  /products/hrsteel2.phtml?page=rttube The plastic needs to be fade resistant (completely non-fading is preferred if such a thing exists as this product will be outdoor). This material should also be resistant to coastal salt spray and typical road chemicals. It also should be CNC machinable, resistant to impact/abrasion and is ideally available in many colors (the ability to custom match would be perfect). I prefer lengths provided up to 20' long which we could then cut to length and machine in our shop. My guess is that these will need to be 1/8"-1/4" in thickness. The...
Category: Product Design       

i****mar
 [?]
Sign in to view client's details.
| i****mar
|    United States
Fixed Price: Not Sure   |  Posted: Mar 02, 2015  |  Ends: 20h, 55m  |   29 Proposals
Hey - I am a toronto based independent artist and need someone to help me design some PCBs for a project I am working on. I have sample designs but want to work with someone to improve on them. From what I understand, the project would be very straight forward and not difficult for anyone with any experience/education... but I have neither. I would like to work with someone from Toronto, but am open to anyone at this time.
Category: Electrical       
Preferred Location: Canada

R****val
 [?]
Sign in to view client's details.
| R****val
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 09, 2015  |  Ends: 6h, 11m  |   4 Proposals
need to work on a wet wipe product and need a specialist/consultant to advise and help me bring innovation to life . must be knowledgeable of cosmetics, health and beauty products, mechanical engineering and pharmaceutics. And worked with manufacturing development with companies specialised in health and beauty products.
Category: Product Design       

e****Gal
 [?]
Sign in to view client's details.
| e****Gal *
|    United States
Fixed Price: Not Sure   |  Posted: Jan 31, 2015  |  Ends: 22h, 24m  |   8 Proposals
i have multiple industrial projects that require feasibility study. please post your experience and skills to make the study for me. the first project is to manufacture many items using POLYMETHACRYLATE RESIN PMMA
Category: Other - Engineering &...       

M****dCo
 [?]
Sign in to view client's details.
| M****dCo
|    Saudi Arabia
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job