Save this Search
     
Sort by:
  • Posted Date
Civil & Structural
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 16h, 5m ago  |  Ends: 14d, 7h  |   1 Proposal
I am designing a universal card. See   [obscured]  /wiki/Universal_card. I would like to enable it to work in a wide range of readers. But as a small company it is expensive to set up an extensive testing program to do this. I am looking for an electrical engineering consultant with in depth knowledge about dip and motorized magnetic stripe readers that could guide us in our development. English speaking a requirement.
Category: Electrical       

t****hpe
 [?]
Sign in to view client's details.
| t****hpe
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 17h, 3m ago  |  Ends: 14d, 6h  |   13 Proposals
we are doing civil design for the site of new private school...first i need someone to run sections on our prelim site plan
Category: Civil & Structural       
Skills: AutoCAD, Civil Engineering       

g****eyn
 [?]
Sign in to view client's details.
| g****eyn
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 17h, 39m ago  |  Ends: 14d, 6h  |   6 Proposals
3d printer Circuit board with a few communication issues. Problems to be resolved include the following: -Diode protection for stepper motors(Back Feed) -When SD card is inserted, LCD screen Flickers' -Trouble with communication to computer software(FT232RL to Slicer program(Cura)) -USB Download issue Arduino Program *Location Preference Northeast USA *Photos and Files available
Category: Electrical       
Preferred Location: United States

j****532
 [?]
Sign in to view client's details.
| j****532
|    United States
Fixed Price: Not Sure   |  Posted: 17h, 51m ago  |  Ends: 14d, 6h  |   5 Proposals
we are developing a Fan for the use in the entertainment industry. We need a fan controller that will do the following Very quiet must be a VFD design 100v - 240 v input 120v output motor PSC 1/4 hp to 1 hp Control by pot and DMX 512 pro Small size durable inexpensive to fabricate
Category: Electrical       

j****134
 [?]
Sign in to view client's details.
| j****134 *
|    Canada
Fixed Price: $1,000 - $5,000   |  Posted: 20h, 25m ago  |  Ends: 14d, 3h  |   6 Proposals
Hi, We need very specific device manufacturing (prototype + logic). Size of device must be not more then iBeacon (but here can be any server device), when some one near range of device (range is 2-3 metres), device must catch it (i mean identify it) and send signal to WiFi router or something else. Mobile Devise can be Android / IOS and we are not able to install any software to device. Probably you can catch BT or WiFi or any else signal from device. Share your budget. At first we need ~ 100 devices. Thanks!
Category: Product Design       

C****Ltd
 [?]
Sign in to view client's details.
| C****Ltd
|    Russia
Fixed Price: $100 - $250   |  Posted: 22h, 49m ago  |  Ends: 6d, 1h  |   3 Proposals
Will email details. Basic as below ? X-Y table with 2 step motors, 100mm x 100mm, move 2mm/revolution ? Controlled by step controller: 200 steps/revolution ? PLC: Allen-Bradley Micrologic 1400, 1766-L32BXB ? Program software: RSLogix 500, use PTO Input & Output Objects Input from HMI: ? 3-Positions, (X,Y), limit ±0.5-45mm (or ±50 - ±4500 steps) ? Buttons (5 on HMI): Position1 ? go to position (x1,y1) Position2 ? go to position (x2,y2) Position3 ? go to position (x3,y3) Stop - Home ? go to (0,0) Output on HMI: Display actual coordinate (x,y) Requirements: If x or y > 45 mm or <-45 mm, stop and send alarm; E-stop: stop X,Y and display actual coordinate (x,y) Target: Sample A-B PLC grogram (.RSS) for run.
Category: Product Design       
Skills: PLC & SCADA       

y****000
 [?]
Sign in to view client's details.
| y****000
|    United States
Fixed Price: Less than $500   |  Posted: 23h, 24m ago  |  Ends: 14d, 0h  |   6 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Réalisation pour un client de plans de structures en aluminium. A rendre le 31/08/15.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Fixed Price: Less than $500   |  Posted: 23h, 26m ago  |  Ends: 14d, 0h  |   3 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Cherchons un dessinateur pour la réalisation de plans techniques. A rendre le 31/08/15.
Category: CAD       
Skills: AutoCAD, OrCAD, SolidWorks, 3D Design       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Fixed Price: Less than $500   |  Posted: 23h, 30m ago  |  Ends: 14d, 0h  |   7 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Nous recherchons un dessinateur 3D Solidworks pour une mission courte. Mission à rendre le 31/08/15.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Fixed Price: Not Sure   |  Posted: Aug 28, 2015  |  Ends: 13d, 19h  |   8 Proposals
I will like a very good product designer than can create an innovative portable salon sink which can be easily carried around and doesn't take a lot of effort or time to setup before use. It has to be portable and lightweight, easy to setup, and is easily collapsible into a rollable case to make it easy for transport. The designs I have seen are harder to use for freelance stylists because 1) the sink takes some time to setup so has to have been setup prior to the client visit 2) once the sink is setup prior to the client visit, the product becomes bigger and harder to transport as it is now bulky 3) there is no case for the sink in its pre-setup of post-setup phase so there's no sleek/professional way for stylists to transport it into clients homes. The sink design should also factor in the need to retrieve water and to drain out water. The design of the sink, most particularly of the base of the sink, has to be innovative in order to overcome these challenges and so the product de...
Category: Product Design       

E****Bar
 [?]
Sign in to view client's details.
| E****Bar
Fixed Price: About $2,500   |  Posted: Aug 28, 2015  |  Ends: 16d, 8h  |   5 Proposals
We need a Radar system developed that is camera based. The project will require the freelancer to build a pan, tilt and zoom solution+ the detection and tracking software. Operational Specification 1)System scans the sky looking for planes (Any Kind) 2)Detect at least 10 planes at the same time 3)Assign Ids to all detected plane (  [obscured]  /watch?v=LNaL58GRou4) Something like this but for the planes. 4)Track the plane selected by the operator 5)The software needs to calculate the GPS location of the plane + altitude + Speed + Distance of the plane from the camera + expected path 6)The system will need to identify the planes by make and name 7)Have a traditional radar GUI + Show the plane( that is being tracked) on Google Maps 8)Detection range of 5Km 9)Required accuracy rate of +-10m
Category: Product Design       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 27, 2015  |  Ends: 13d, 13h  |   27 Proposals
I've got a concept for a new electronic product, for which I would like some assistance building a functional prototype. This includes: - Initial review and feasibility - Electronic product design - Prototype design and construction Contact me with examples of your work and rate information. If you have any questions, let me know. Thank you.
Category: Electrical       

y****act
 [?]
Sign in to view client's details.
| y****act
|    United States
Fixed Price: Not Sure   |  Posted: Aug 27, 2015  |  Ends: 13d, 13h  |   13 Proposals
We are looking for a quantity surveyor with advance estimating skills and experience that can perform detailed drywall & framing, and plastering & EIFS foam quantity takeoffs and estimates for high-rise buildings and commercial developments. We are looking for someone that is well organized, can communicate effectively, willing to review work performed, and that can send us some samples of his work, that is, previous quantities takeoffs to determine your level of experience. Our work assignments are on a project per project basis, fixed price that we can agree for each job upon review. We have the following projects available and need several good quantity surveyors that can assist us with all the projects that we have ongoing. Please find first project: Palazzo Dellaluna - Plans & Spec's (Click Link Below)   [obscured]  /s/4s0h9zzmdgwdzmu/PDL_ARCHITECTURE%20%281%29.pdf?dl=0
Category: Civil & Structural       

G****ing
 [?]
Sign in to view client's details.
| G****ing
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Aug 27, 2015  |  Ends: 28d, 11h  |   8 Proposals
Looking to manufacture custom hardware, brass, zinc, stainless, aluminum, etc. will need samples and prototype quickly. Looking for top quality only, honest and reliable.
Category: Product Design       
Preferred Location: United States

P****ere
 [?]
Sign in to view client's details.
| P****ere
|    United States
Fixed Price: $500 - $1,000   |  Posted: Aug 27, 2015  |  Ends: 13d, 7h  |   15 Proposals
Can you perform drainage plan both engineering and drafting for residentail and commercial projects in TExas? I will provide site plan and topo. I'll send cad files for a specific quote
Category: Civil & Structural       
Skills: AutoCAD, Civil Engineering       

s****ina
 [?]
Sign in to view client's details.
| s****ina
|    United States
Fixed Price: Not Sure   |  Posted: Aug 27, 2015  |  Ends: 13d, 6h  |   9 Proposals
Need to develop an LED bulb with backup battery inside which will activate itself when the power goes off. No manual switch , no remote, must turn automatically on when the power goes off and if the wall switch is on. Must be able to turn off using wall switch. 900 lumens of light needed. Need 10-14 hours of runtime in good lighting in emergency mode when power goes off.
Category: Electrical       

n****imd
 [?]
Sign in to view client's details.
| n****imd
|    United Arab Emirates
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 27, 2015  |  Ends: 13d, 5h  |   4 Proposals
We require a physics / laser expert to run some calculations and provide some reports for our device. Need to calculate energy density, dosage (this is a medical application) and total power for our existing laser (low power). Please provide your SkypeID so we can interview you.
Category: Electrical       
Skills: Electronics, Physics, Electrical Engineer, laser       

p****one
 [?]
Sign in to view client's details.
| p****one
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 27, 2015  |  Ends: 13d, 3h  |   23 Proposals
Hi, I have with me a PCB design created for me, but I wish to have an consultation with an expert on the design to ensure it is robust enough before I take it to the Gerber design stage. The design is for an Emergency light PCB control which will switch to battery mode when the supply has been cut. Let me know should you be interested and I shall revert with more details. I am fine on hourly rate, but I also wish to chat online and discuss to go thru any doubts. Thank you. Lee Han Pin
Category: Product Design       

H****pin
 [?]
Sign in to view client's details.
| H****pin
|    Singapore
Fixed Price: Not Sure   |  Posted: Aug 27, 2015  |  Ends: 13d, 0h  |   13 Proposals
Need to get a lay out design, architecture, 3D rendering done for a dental office project for a US client. Site CAD drawing available as input. Knowledge in US building codes required. Our client is in the process of remodeling/renovating an existing office (has rooms) to meet dental office requirements (need more rooms).We require 3D models of the proposed redesign/renovation and are also considering the possibility of creating a virtual tour feature that can be uploaded to our website. Prospective Freelancers would have to show competence in Architectural 3D modelling To give some idea on the scope of work 1. Building type: 3800 sf interior 2. No of rooms: 10 3. Toilets & Bath: 2 4. There will be structural changes inside to create more rooms. Deliverable: Models for each room, dental surgical rooms, LAB, sterilization, Dr Rooms Models for passages& corridors Models for reception, waiting lounge,staff lounge We will evaluate proposals based on the following 1) Qualificat...
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: India

k****gix
 [?]
Sign in to view client's details.
| k****gix *
|    United States
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: Aug 27, 2015  |  Ends: 12d, 14h  |   3 Proposals
Looking for the Hi-Fi Engineer to design an Audio Hi-Fi VU meter with the Following requirements: 9.1 Independent Analog Input Channels, RCA, XLR, Banana, Etc 9.1 Vu Meters/leds ( 1 per input ) Can use a DSP for Functions Like: Input Level, Input Detect: Peak, RMS Dimmer Response Speed. Your Job here will be to design the Electronic Part using from the shelf Components, write code is a plus. NDA and Contract will be required, If interested please send your information for NDA. Project design Price to be determined
Category: CAD       

e****ico
 [?]
Sign in to view client's details.
| e****ico *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 12d, 12h  |   21 Proposals
We need a drawing of a curved wireframe that we've already drawn in autocad 3d to be plotted onto approximately (30) PDF full size plots ready to be printed in 1:1 scale on 36" paper. We will give you an autocad file and we need each section of frame to be rotated into a plan view and an elevation view and plotted as a pdf. Please give us an hourly rate an an estimate per finished PDF plot. Thanks for bidding!
Category: CAD       
Skills: 3D Modeling, AutoCAD       

L****ive
 [?]
Sign in to view client's details.
| L****ive
|    United States
Fixed Price: $40 - $50   |  Posted: Aug 26, 2015  |  Ends: 12d, 9h  |   11 Proposals
I need mockups showing exact measurements and features of my cup designs. The final mock up files will need to be production ready. So i can just hand these files over to the manufacture. There will be two versions of this cup design. Both will be the same basic design, style and colors. The only difference in models will take place at the base of the cup. One will have a motor stir. The other will have a secret compartment. So to recap: I need two production sketches and 3d mock up of how the product will look for both versions. Examples of concept sketch:   [obscured]  /search?q=product+concept&espv=2&biw=1280&bih=658&source=lnms&tbm=isch&sa=X&ved=0CAYQ_AUoAWoVChMIp9e-s_LHxwIVCxSSCh2cgg7K#tbm=isch&q=product+concept+sketch Example of concept 3d rendering:   [obscured]  /search?q=product+concept&espv=2&biw=1280&bih=658&source=lnms&tbm=isch&sa=X&ved=0CAYQ_AUoAWoVChMIp9e-s_LHxwIVCxSSCh2cgg...
Category: Product Design       

v****man
 [?]
Sign in to view client's details.
| v****man
|    United States
Fixed Price: Not Sure   |  Posted: Aug 26, 2015  |  Ends: 12d, 9h  |   14 Proposals
I need someone who can make for me a 3D model of an idea i have. I need whatever is needed in order to start a patent and manufacturing. i have attached a basic sketch of what the design should resemble.
Category: Product Design       

t****093
 [?]
Sign in to view client's details.
| t****093 *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 12d, 8h  |   7 Proposals
Start-up company needing services from ideation to production for a beach sandal company. Currently in the initial stages of the process. The beach sandal company will strive to be eco-friendly but fashion forward. We would like to utilize recycled products.
Category: Product Design       

j****v10
 [?]
Sign in to view client's details.
| j****v10
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job