Save this Search
     
Sort by:
  • Posted Date
Contract Manufacturing
Fixed Price: Not Sure   |  Posted: 1h, 28m ago  |  Ends: 14d, 22h  |   1 Proposal
I will like a very good product designer than can create an innovative portable salon sink which can be easily carried around and doesn't take a lot of effort or time to setup before use. It has to be portable and lightweight, easy to setup, and is easily collapsible into a rollable case to make it easy for transport. The designs I have seen are harder to use for freelance stylists because 1) the sink takes some time to setup so has to have been setup prior to the client visit 2) once the sink is setup prior to the client visit, the product becomes bigger and harder to transport as it is now bulky 3) there is no case for the sink in its pre-setup of post-setup phase so there's no sleek/professional way for stylists to transport it into clients homes. The sink design should also factor in the need to retrieve water and to drain out water. The design of the sink, most particularly of the base of the sink, has to be innovative in order to overcome these challenges and so the product de...
Category: Product Design       

E****Bar
 [?]
Sign in to view client's details.
| E****Bar
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: 4h, 53m ago  |  Ends: 19h, 6m  |   6 Proposals
Preliminary site plans and conceptual drawings for a 5 story 8 unit apt./condo development in washington dc.
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

s****ada
 [?]
Sign in to view client's details.
| s****ada
|    United States
Fixed Price: About $2,500   |  Posted: 6h, 47m ago  |  Ends: 17d, 11h  |   5 Proposals
We need a Radar system developed that is camera based. The project will require the freelancer to build a pan, tilt and zoom solution+ the detection and tracking software. Operational Specification 1)System scans the sky looking for planes (Any Kind) 2)Detect at least 10 planes at the same time 3)Assign Ids to all detected plane (  [obscured]  /watch?v=LNaL58GRou4) Something like this but for the planes. 4)Track the plane selected by the operator 5)The software needs to calculate the GPS location of the plane + altitude + Speed + Distance of the plane from the camera + expected path 6)The system will need to identify the planes by make and name 7)Have a traditional radar GUI + Show the plane( that is being tracked) on Google Maps 8)Detection range of 5Km 9)Required accuracy rate of +-10m
Category: Product Design       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 7h, 23m ago  |  Ends: 14d, 16h  |   9 Proposals
I've got a concept for a new electronic product, for which I would like some assistance building a functional prototype. This includes: - Initial review and feasibility - Electronic product design - Prototype design and construction Contact me with examples of your work and rate information. If you have any questions, let me know. Thank you.
Category: Electrical       

y****act
 [?]
Sign in to view client's details.
| y****act
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: 9h, 49m ago  |  Ends: 29d, 14h  |   4 Proposals
Looking to manufacture custom hardware, brass, zinc, stainless, aluminum, etc. will need samples and prototype quickly. Looking for top quality only, honest and reliable.
Category: Product Design       
Preferred Location: United States

P****ere
 [?]
Sign in to view client's details.
| P****ere
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 10h, 10m ago  |  Ends: 14d, 13h  |   11 Proposals
Seeking a well experienced and well connected person in China or with connections in China who can help with sourcing 24 new products for our firm every month. Must have experience in souring and be able to do trust and background checks on vendors. Also must be able to find and locate vendors for specific products and negotiate samples and also negotiate rates. Must have good experience and also some references. Will pay hourly or by the project.
Category: Contract Manufacturing       

h****nce
 [?]
Sign in to view client's details.
| h****nce
|    United States
Fixed Price: Not Sure   |  Posted: 15h, 1m ago  |  Ends: 14d, 8h  |   7 Proposals
Need to develop an LED bulb with backup battery inside which will activate itself when the power goes off. No manual switch , no remote, must turn automatically on when the power goes off and if the wall switch is on. Must be able to turn off using wall switch. 900 lumens of light needed. Need 10-14 hours of runtime in good lighting in emergency mode when power goes off.
Category: Electrical       

n****imd
 [?]
Sign in to view client's details.
| n****imd
|    United Arab Emirates
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 15h, 10m ago  |  Ends: 14d, 8h  |   2 Proposals
We require a physics / laser expert to run some calculations and provide some reports for our device. Need to calculate energy density, dosage (this is a medical application) and total power for our existing laser (low power). Please provide your SkypeID so we can interview you.
Category: Electrical       
Skills: Electronics, Physics, Electrical Engineer, laser       

p****one
 [?]
Sign in to view client's details.
| p****one
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 17h, 57m ago  |  Ends: 14d, 6h  |   17 Proposals
Hi, I have with me a PCB design created for me, but I wish to have an consultation with an expert on the design to ensure it is robust enough before I take it to the Gerber design stage. The design is for an Emergency light PCB control which will switch to battery mode when the supply has been cut. Let me know should you be interested and I shall revert with more details. I am fine on hourly rate, but I also wish to chat online and discuss to go thru any doubts. Thank you. Lee Han Pin
Category: Product Design       

H****pin
 [?]
Sign in to view client's details.
| H****pin
|    Singapore
Fixed Price: Not Sure   |  Posted: 20h, 41m ago  |  Ends: 14d, 3h  |   11 Proposals
Need to get a lay out design, architecture, 3D rendering done for a dental office project for a US client. Site CAD drawing available as input. Knowledge in US building codes required. Our client is in the process of remodeling/renovating an existing office (has rooms) to meet dental office requirements (need more rooms).We require 3D models of the proposed redesign/renovation and are also considering the possibility of creating a virtual tour feature that can be uploaded to our website. Prospective Freelancers would have to show competence in Architectural 3D modelling To give some idea on the scope of work 1. Building type: 3800 sf interior 2. No of rooms: 10 3. Toilets & Bath: 2 4. There will be structural changes inside to create more rooms. Deliverable: Models for each room, dental surgical rooms, LAB, sterilization, Dr Rooms Models for passages& corridors Models for reception, waiting lounge,staff lounge We will evaluate proposals based on the following 1) Qualificat...
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: India

k****gix
 [?]
Sign in to view client's details.
| k****gix *
|    United States
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: Aug 27, 2015  |  Ends: 13d, 17h  |   3 Proposals
Looking for the Hi-Fi Engineer to design an Audio Hi-Fi VU meter with the Following requirements: 9.1 Independent Analog Input Channels, RCA, XLR, Banana, Etc 9.1 Vu Meters/leds ( 1 per input ) Can use a DSP for Functions Like: Input Level, Input Detect: Peak, RMS Dimmer Response Speed. Your Job here will be to design the Electronic Part using from the shelf Components, write code is a plus. NDA and Contract will be required, If interested please send your information for NDA. Project design Price to be determined
Category: CAD       

e****ico
 [?]
Sign in to view client's details.
| e****ico *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 13d, 15h  |   21 Proposals
We need a drawing of a curved wireframe that we've already drawn in autocad 3d to be plotted onto approximately (30) PDF full size plots ready to be printed in 1:1 scale on 36" paper. We will give you an autocad file and we need each section of frame to be rotated into a plan view and an elevation view and plotted as a pdf. Please give us an hourly rate an an estimate per finished PDF plot. Thanks for bidding!
Category: CAD       
Skills: 3D Modeling, AutoCAD       

L****ive
 [?]
Sign in to view client's details.
| L****ive
|    United States
Fixed Price: $40 - $50   |  Posted: Aug 26, 2015  |  Ends: 13d, 12h  |   10 Proposals
I need mockups showing exact measurements and features of my cup designs. The final mock up files will need to be production ready. So i can just hand these files over to the manufacture. There will be two versions of this cup design. Both will be the same basic design, style and colors. The only difference in models will take place at the base of the cup. One will have a motor stir. The other will have a secret compartment. So to recap: I need two production sketches and 3d mock up of how the product will look for both versions. Examples of concept sketch:   [obscured]  /search?q=product+concept&espv=2&biw=1280&bih=658&source=lnms&tbm=isch&sa=X&ved=0CAYQ_AUoAWoVChMIp9e-s_LHxwIVCxSSCh2cgg7K#tbm=isch&q=product+concept+sketch Example of concept 3d rendering:   [obscured]  /search?q=product+concept&espv=2&biw=1280&bih=658&source=lnms&tbm=isch&sa=X&ved=0CAYQ_AUoAWoVChMIp9e-s_LHxwIVCxSSCh2cgg...
Category: Product Design       

v****man
 [?]
Sign in to view client's details.
| v****man
|    United States
Fixed Price: Not Sure   |  Posted: Aug 26, 2015  |  Ends: 13d, 12h  |   12 Proposals
I need someone who can make for me a 3D model of an idea i have. I need whatever is needed in order to start a patent and manufacturing. i have attached a basic sketch of what the design should resemble.
Category: Product Design       

t****093
 [?]
Sign in to view client's details.
| t****093 *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 13d, 11h  |   7 Proposals
Start-up company needing services from ideation to production for a beach sandal company. Currently in the initial stages of the process. The beach sandal company will strive to be eco-friendly but fashion forward. We would like to utilize recycled products.
Category: Product Design       

j****v10
 [?]
Sign in to view client's details.
| j****v10
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 13d, 11h  |   1 Proposal
Start-up company needing services from ideation to production for a beach sandal company. Currently in the initial stages of the process. The beach sandal company will strive to be eco-friendly but fashion forward. We would like to utilize recycled products. We are looking to hire someone that has expertise in finding a manufacturer that fits our needs. We would like to manufacture in the USA.
Category: Product Design       

j****v10
 [?]
Sign in to view client's details.
| j****v10
|    United States
Fixed Price: Less than $500   |  Posted: Aug 26, 2015  |  Ends: 13d, 9h  |   7 Proposals
I need developed complete electronics (populated PCB) as described here:   [obscured]  /controller/ Long term production will be required and I will need a cost per unit/ in volume of 5-10 units but production is NOT a part of this platform. Just the development which includes the design and working test unit. I'll need all paperwork associated with the design. Each time we re-designed we improved the end product substantially. That is why I am making this query. This will be our last improvement (I said that before) so it needs to be done correctly. Note: I have several versions in the worldwide market since 2008 so I know EXACTLY what my costs are. Any/all bullshit will be ignored. I wasn't born last night. Note: This is high school 101 electronics, very simple, uncomplicated. Note: I do NOT want to hear about your qualifications, your team, blah, blah, blah. Either you contact me to get to work or leave me alone! Note: If you have responded previously, you...
Category: Electrical       

a****man
 [?]
Sign in to view client's details.
| a****man
|    United States
Hourly Rate: Not Sure   |  Duration: 4-6 months  |  Posted: Aug 26, 2015  |  Ends: 13d, 9h  |   7 Proposals
Seeking a well qualified product development manager for a new product we are developing and will eventually manufacture. We are wanting to work with someone for a defined period of time. Most likely 6 months depending on the providers experience. The provider needs to be self motivating and willing to work between multiple teams and personality types. Good communication, organizational skills, and attention to detail are extremely important. Also, establish ambitious yet realistic deadlines and manage ongoing timelines and deliverables to hit those milestones. Provider needs to have experience with or managing the following areas: Industrial design Mechanical engineering PCB layout Electronic vendor component management. Roadmap development Program/firmware dev. for FPGA Offshore manufacturing Rapid Prototyping Project management. Battery and or power management. Ideally experience with the following: Optics or optical design. Image technology (such as sensors or image capture ...
Category: Contract Manufacturing       
Preferred Location: North America

c****b08
 [?]
Sign in to view client's details.
| c****b08
|    United States
Fixed Price: Not Sure   |  Posted: Aug 26, 2015  |  Ends: 13d, 3h  |   5 Proposals
Most of the time I have 120VAC available via generators. However, when the generators (which is the prime power source) run out of diesel I need at least an hour or two to continue powering my sensors and cell modem. They both require 12VDC and at full draw require 350ma. This is the peak when the cell modem is transmitting. While not transmitting the requirement is less than 100ma. So I need batter backup. Solar is another option as more and more I am going to places where the generators are only used at night (light towers). I may have to get more use out of this option at some point. Here are the general specifications: - 120VAC input - Battery backup (4x AA or equivalent) - Solar backup (12v 10W panel) - 12-15V DC output for sensors, cell modem, and 5VDC regulator - a voltage meter scaled 0-5V from 10-18V for the MCU ADC - digital output for detection of battery (HIGH on AC, LOW on Battery Backup). Please send me a quote on this project for a Schematic, BOM and general board l...
Category: Contract Manufacturing       

a****egt
 [?]
Sign in to view client's details.
| a****egt
|    Canada
Fixed Price: Less than $500   |  Posted: Aug 26, 2015  |  Ends: 13d, 3h  |   0 Proposals
The project is to manufacture; 1. a 2cmx10cm transmitter device which needs to transmit a basic signal over the range of up to 200 meters with a built in battery. The battery life could be anything from at least one hour. 2. two sets of receivers which will be placed 50 to 100 meters apart from one another to a fixed location. The receivers -by using the signal from the transmitter- has to calculate the distance between themselves and the transmitter with x,y,z coordinates using, themselves as two fixed reference points. The receivers should have a flashing red LED to indicate if and when the transmitter is 100 meters away from the receivers horizontally (y axis) and 10/15 meters away from the horizon vertically (x axis) The transmitter should have a button to voluntarily activate the red LED lights on the receivers. These products must be manufactured and dispatched to me ASAP. The payment method will be discussed.
Category: Product Design       

m****ren
 [?]
Sign in to view client's details.
| m****ren
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Aug 26, 2015  |  Ends: 12d, 23h  |   6 Proposals
We are looking for a electronics designer with experience in laying out capacitive touch sensors, specifically touch sensors etched on clear film (ITO, HCF, etc.). We have the design rules and basic mechanical envelope (including an example larger display) that we need to layout for fabrication. Selected candidate will have own tools (please provide name) and create the necessary Gerber files. We can provide examples and would look for an example layout and Gerber.
Category: CAD       
Preferred Location: North America

r****ssi
 [?]
Sign in to view client's details.
| r****ssi
|    United States
Hourly Rate: $40 - $50 / hr   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 12d, 20h  |   16 Proposals
Need a Civil Engineer or Land Surveyor who can provide simple corrections on the parcel "Final Map" er Town of Mammoth Lakes Surveyor "Comments" and who can later sign the map before is recorded.
Category: CAD       
Skills: Engineering drawing       
Preferred Location: United States

O****aLA
 [?]
Sign in to view client's details.
| O****aLA
|    United States
Fixed Price: Not Sure   |  Posted: Aug 25, 2015  |  Ends: 12d, 13h  |   6 Proposals
Hi, I am searching for a circuit design engineer to help finalize the electronics for a new product I am developing. The plan is to launch the product this year. I'm a mechanical engineer (10 yrs in product development) looking for an electrical engineer with experience designing basic power conditioning and distribution circuits. Must have PCB design experience. Domestic (US) applicants only. Major plus if you live in South Florida. This is a startup opportunity and I am offering equity and/or potential partnership in my company or a contract with conditional payment terms based on receipt of funding. I am anticipating investment in the 2-3 month time frame. I am looking for somebody extremely motivated and ambitious to partner up with. A signed Non-Disclosure Agreement will be required before any technical data is shared. Please contact me if you are interested and I will email you the NDA. Once the NDA is signed I will send you a Technical Requirements Document defining ...
Category: Electrical       
Preferred Location: United States

z****las
 [?]
Sign in to view client's details.
| z****las
|    United States
Fixed Price: Not Sure   |  Posted: Aug 25, 2015  |  Ends: 12d, 8h  |   13 Proposals
I need to make a prototype of an earpiece-like device that can receive transmission of soundwaves from underwater. I am thinking of using bluetooth, but I am not sure if it works underwater. I was also thinking of using radio transmission, but I would like you expertise on which option, or if there are any other options, would be best. .
Category: Electrical       

a****jin
 [?]
Sign in to view client's details.
| a****jin
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job