Save this Search
     
Sort by:
  • Posted Date
Fixed Price: $500 - $1,000   |  Posted: Aug 15, 2015  |  Ends: 2d, 14h  |   6 Proposals
We are a smart wearable technology firm located in New York. Recently, we launched a new products, and we need at least 30 of customized displays with a size of 4.1-4.35 cm * 17cm, minimum 4 pixels/ cm resolution, and flexible full color screen. if you guys are interested in our project, please let me know.
Category: Electrical       

A****007
 [?]
Sign in to view client's details.
| A****007 *
|    United States
Fixed Price: Less than $500   |  Posted: Aug 15, 2015  |  Ends: 2d, 12h  |   18 Proposals
Dear All, we have a PCB layout drawing on Orcad and due to some bad conditions we lost its schematic. so we need: 1-Redraw schematic of it on Orcad. 2-Make some EMF recommendations for the layout, review for all PCB layout and make the required changes or adding component for that. Thanks.
Category: Electrical       

I****Gco
 [?]
Sign in to view client's details.
| I****Gco
|    Egypt
Fixed Price: Not Sure   |  Posted: Aug 15, 2015  |  Ends: 2d, 6h  |   12 Proposals
This is a PCB layout job. I have done schematic design (using PowerLogic) and all the component libraries and connections are done (as you can see from the attached screenshot). So this job is a placement and routing job. CAD tool : Mentor PADS 9.3 or similar version (no other tools are allowed) Delivery expectation : 48 hours immediately after selected
Category: Electrical       
Skills: PADS       

W****m88
 [?]
Sign in to view client's details.
| W****m88
|    Korea, Republic of
Fixed Price: $100 - $120   |  Posted: Aug 14, 2015  |  Ends: 1d, 18h  |   4 Proposals
It is an applied Mechanics research work which is aimed in determining the This project involves analysis of vibration and acoustic emission data measured on rolling element bearings. The measurements were taken under good and defective conditions and the objective of this project is centered on extracting the most sensitive parameters from the data to indicate the state of mechanical integrity of the bearing. All measured data would be given and it is expected to undertake the analysis with MATLAB.
Category: Mechanical       

y****thy
 [?]
Sign in to view client's details.
| y****thy
|    Nigeria
Fixed Price: Less than $500   |  Posted: Aug 14, 2015  |  Ends: 1d, 17h  |   13 Proposals
I need the electronic components designed for what will be a battery powered bluetooth speaker unit. I need everything to fit on a single PCB, as small as possible, 2 sided is fine. Specs: Battery Supply: 3.7V-5V Li-Ion rechargeable DC battery recharger Bluetooth v2.1 transceiver Class D amplifiers to power 4x1W 8ohm full range HIFI speakers -Need total of 4 Channels The board will need the highest quality products to ensure best Audio quality (was thinking TFA9887 amp by NXP). Will also need connection points/solder pads for leads to connect micro usb jack for charging purposes as well as for leads to connect an on/of switch.
Category: Electrical       

t****n15
 [?]
Sign in to view client's details.
| t****n15
|    United States
Fixed Price: Not Sure   |  Posted: Aug 14, 2015  |  Ends: 1d, 14h  |   9 Proposals
I am looking for an electronics engineer to help in development of a LED lamp product. We are designing a high power torchiere lamp for indoor use. The lighting module will be mounted by screw thread on a torchiere pole . The module should be 120W-130W about 11000lumens cold light and utilize the floodlight chips used in LED floodlights.
Category: Electrical       
Preferred Location: North America

h****usa
 [?]
Sign in to view client's details.
| h****usa
|    United States
Fixed Price: About $300   |  Posted: Aug 14, 2015  |  Ends: 1d, 12h  |   5 Proposals
We just need someone to make this remote control ball. The ball needs to be 50 cm in diameter and capable of carrying a load of 10 kgs (excluding the batteries) while travelling with max speeds of 30km/hr . You just need to follow this instructables.   [obscured]  /id/Remote-Controlled-Basket-Ball-Robot/
Category: Mechanical       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    Canada
Fixed Price: Less than $500   |  Posted: Aug 14, 2015  |  Ends: 1d, 6h  |   1 Proposal
I need help in this automotive project. The details are attached in the file below. Topic: Active Damping and Throttle Control in formula student in efficient and stable cornering. The attached file is sample to let you understand what kind of report we needed. Reply ASAP use simpack 9.7 to open the demo car......the main aim of reducing the throttle is to check or improving the stability of the vehicle in cornering.....and in the active damping you have to work on the suspensions of the vehicle.... sample models are within the documentation of simpack , in the help options. Check the help file While working in simpack amplitude of excitation must be zero, In order to work on active damping : Step 1:right click on tracks step 2: Activate track vehicle globals Step 3: Stifness vehicle damping. and work on the following things in Trottle control: Drive: 1.Velocity actual 2.Velocity desired 3.Actual input value 4Actual output value 5Actual value of funtion ========== Targets to ac...
Category: Mechanical       

l****mal
 [?]
Sign in to view client's details.
| l****mal *
|    India
Fixed Price: $500 - $1,000   |  Posted: Aug 14, 2015  |  Ends: 1d, 3h  |   3 Proposals
a 7 inch tablet with inbuilt receipt printer and credit card swipe. If you have anything particular, feel free to contact me at   [obscured]   Urgent requirement
Category: Product Design       
Preferred Location: North America, Western Europe, Eastern Europe, Eastern Asia, Africa

k****wal
 [?]
Sign in to view client's details.
| k****wal
|    India
Fixed Price: Less than $500   |  Posted: Aug 13, 2015  |  Ends: 15h, 0m  |   17 Proposals
Need help with a very complicated loft. Must take a loft and blend it into a side wall so it disappears. Blend sketch 9 (part of loft 1) and sketch 20 (part of loft 3) into the highlighted blue wall. I will forward the SW .sldprt file when I award the job. Don't bid unless you are positive you can do the job. Must have SW 2015. Must complete the job by Monday at the latest. I need a quote on the total amount to do the job.
Category: Product Design       

C****llc
 [?]
Sign in to view client's details.
| C****llc
|    United States
Fixed Price: $100 - $120   |  Posted: Aug 13, 2015  |  Ends: 14h, 9m  |   1 Proposal
The titile of my project is :Two dimensional modelling of sand production, using Finite volume to solve the governing equation and then use C++ to program.A C++ Visual code would be used to solve a 2Dimensional Navier stoke's equation in order to predict the critical drawdown pressure. I have been able to obtain the governing equation and discretise using finite volume.I was given a 1 dimensional problem of conduction using C++ to obtain the Temperature Distribution at a particular boundary conditions(Top and Bottom -Insulated, Left-Dirichlet, Right-Convective) and i was able to use c++ to show the temperature distribution of the rod. Now i have a 2Dimensional Navier stoke's equation which has the Energy equation,Momentum and Pressure Equation which i have to solve for a flow in a pipe and obtain the Temperature,U and V velocity, then the pressure distribution in the pipe. After solving the Navier stoke's equation , i would also need to incorporate the code to determine the critical dr...
Category: Mechanical       

y****thy
 [?]
Sign in to view client's details.
| y****thy
|    Nigeria
Fixed Price: Less than $500   |  Posted: Aug 13, 2015  |  Ends: 13h, 17m  |   8 Proposals
Searching some one who can design a circuit board that runs off a 12V power source . The board would receives a wireless signal and turn on three different light sources. Both the transmitter and receiver would work via Bluetooth. The transmitter would plug into a 12V wiring harness. I would like to be able to plug the the transmitter into my electric scooter and place the circuit into my reflective vest.
Category: Product Design       
Skills: Manufacturing Design, Electronics       

J****kes
 [?]
Sign in to view client's details.
| J****kes
|    United States
Fixed Price: Not Sure   |  Posted: Aug 13, 2015  |  Ends: 1h, 49m  |   2 Proposals
We are testing an inertial sensor for indoor poisitionning, using sensor units such as the following XSENS   [obscured]  /shop/mti-100-series/mti-300-ahrs/mti-300-ahrs-2a5g4-dk I need a strap, to be positioned on the shoe or the ankle, where the sensor can be inserted in such a way that : - the sensor is positioned on top of the shoe, close to horizontal - the sensor is fully secured on the foot (all the motions from the foot must be transmitted to the sensor, without adding or removing vibrations) - the sensor runs a cable up to the waist -the strap is easy to remove/setup
Category: Mechanical       

F****erd
 [?]
Sign in to view client's details.
| F****erd
|    Austria
Fixed Price: Not Sure   |  Posted: Jul 31, 2015  |  Ends: 2d, 8h  |   8 Proposals
This is a simple LCD laser projector that is similar to those seen on weather clocks (see image). I would like to have a stand-alone that can communicate with my iPhone app and other smartphone (android). Features and functionality include: Rotate to shine on any ceiling or wall operate on 2 AAA that will last at least 6 months Will turn off display when disconnected from smartphone Turn on LCD display when connected to Bluetooth device temperature of where device is (optional) Projection feature brightens as room light levels increase Will display Time Temperature and weather - received from smartphone
Category: Electrical       

f****412
 [?]
Sign in to view client's details.
| f****412
|    United States
Fixed Price: Not Sure   |  Posted: Jul 30, 2015  |  Ends: 1d, 10h  |   19 Proposals
Temperature control utilizing a 1000 ohm RTD input designed to output to a 3-32vdc solid state relay. The temperature control features power saving functions such as standby (reduced heat) and sleep (self power off) modes, a remote encoder / pot w/ momentary for user input, LED display and other calibration parameters. There should be an output to power (activate) other or additional modules and sleep mode may be inhibited by an external feedback from such other modules. Of particular interest is temperature calibration and related duty cycle settings as described later.
Category: Electrical       

p****ian
 [?]
Sign in to view client's details.
| p****ian
|    United States
Fixed Price: Not Sure   |  Posted: May 24, 2015  |  Ends: 1d, 12h  |   14 Proposals
need to draw to submit to the fire department the drawing for approval of central station fire alarm system to approved by fire department. We will provide floor plan.
Category: Electrical       
Skills: AutoCAD, Electrical Engineering, Electronics       

m****one
 [?]
Sign in to view client's details.
| m****one
|    United States
Fixed Price: $500 - $1,000   |  Posted: Apr 12, 2015  |  Ends: 2d, 21h  |   7 Proposals
I am looking for some one who can realize fractional order switched capacitor circuits and implement it in Matlab and in cadence
Category: Electrical       

s****k17
 [?]
Sign in to view client's details.
| s****k17 *
|    Canada
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job