Save this Search
     
Sort by:
  • Posted Date
Hiring Open
Fixed Price: Not Sure   |  Posted: 5 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
We need a simulation with appropriate LED Replacement for conventional 250W HPSV Lights (presently installed) in the proposed plan.   [obscured]  /pyOur0S9mx (download link) . Please also see attached documents. For the purpose of providing solution in LED there are a few points that needs to be checked as follows: 1. The Illumination on the Edge of the plot should be 20Lux Minimum. (as asked by client BUT i feel 25lux should be considered as safe limit) 2. The Illumination on the Taxi Way (Z16/Z17) of the plot should be 5Lux Minimum. (as asked by client BUT i feel 10lux should be considered as safe limit) 3. The pole as of now is single arm and 10meter height, we need dual arm (client tells us the arm can be replaced) and can be incorporated with LED Street Light or Flood Light depending on the coverage. The height of the pole can also be increased upto 18meter if needed for achieving the desired lux level. (although it is prefered to use existing pole to reduce costs, increase of pol...
Category: Other - Engineering &...       
Skills: Dialux       

a****imi
 [?]
Sign in to view client's details.
| a****imi
|    United Arab Emirates
Fixed Price: Less than $500   |  Posted: 33 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
i need Freelancer with good Skille in embedded Systems, java small and Academic Writing too. Please contact me for more details. Regards
Category: Electrical       
Skills: Electrical Engineering, Java, Electronics       

d****000
 [?]
Sign in to view client's details.
| d****000
|    Germany
Fixed Price: Not Sure   |  Posted: 48 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
Hello, We are looking for an experienced electronic engineer, who could develop a PCB ( schematics, routing and at least basic firmware ) for a camera, that would be using the OV13850 image sensor, save images/video to a micro SD card and/or transfer them via wifi. you are free to select a microprocessor or FPGA that you are most familiar with, as long as it is available, would be able to handle 13.5MP images/video and costs user 25$ or so. other requirements during future communication.
Category: Electrical       

C****mes
 [?]
Sign in to view client's details.
| C****mes
|    Latvia
Fixed Price: $150 - $400   |  Posted: 2h, 2m ago  |  Ends: 14d, 21h  |   3 Proposals
Looking for quality practicing M&E engr who fulfils requirements below: -possess minimum qualifications of degree in M& E Engr -possess practical experience in building plans and solutions Task involves analysing CAD engineering drawings and offering solutions to problems + preparing report If you fulfil requirements above, please send (a) samples of work done for previous clients (b) resume/ qualifications/practical work experience
Category: Mechanical       

b****rca
 [?]
Sign in to view client's details.
| b****rca
|    Malaysia
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: 3h, 45m ago  |  Ends: 14d, 20h  |   3 Proposals
I need some one who is good in Image processing and having experience with SIFT algo. The basic will be just write the summary of few papers and Algo. More detail will be sent to selected candidate
Category: Electrical       

e****s88
 [?]
Sign in to view client's details.
| e****s88
|    Austria
Hourly Rate: Less than $10 / hr   |  Duration: 3-4 weeks  |  Posted: 4h, 2m ago  |  Ends: 14d, 19h  |   3 Proposals
I am looking to have a range of designs, and then plans drawn for screens/shelters to improve the aesthetics of garbage bin storage areas. The screens will be for a range of bin sizes and be suitable for residential or commercial garbage bin locations. The designs & plans will be as such that they can be taken to a local Australian aluminium or steel manufacture to build with generic parts, (prefer no custom moulds or components that require new extrusions or similar). Once the screen designs and plans are in place I would like to have 3D models of them generated in a range of different finishes (visual only). These 3D models will then become part of a virtual showroom to be utilised in an app that allows people to photograph their bins, and then select the look and finish of the bin screens from within the app. To summaries, 1, Design bin screens. 2, Draw plans for each in the range. 3, Create 3D modelling for each of the range in a couple of different colours/materials. ...
Category: CAD       

B****ens
 [?]
Sign in to view client's details.
| B****ens
|    Australia
Fixed Price: $100 - $200   |  Posted: 5h, 53m ago  |  Ends: 14d, 18h  |   5 Proposals
The objective is to design and fabricate one or several circuit board(s) capable of collecting multiple vital signs (ECG, SpO2, Temperature). The design can be a new design or one that is based on an existing reference design if the requirements can be met. If a reference design is used, schematics and demo software/firmware will be provided by the freelancer. The requirements are: - Capable of measuring ECG, pulse oximeter (SpO2), and temperature - Use an embedded 32-bit microprocessor with DSP functionality - Data collection of ECG and SpO2 must be simultaneous or with a low, deterministic latency (<1ms) between ECG/SpO2 samples - Sampling of ECG/SpO2 should occur at a rate higher than 100Hz with a good signal-to-noise ratio - Communication over USB/RS232 to a PC host - Onboard storage for at least 10 seconds of ECG/SpO2 data - Powered by a +5V DC power supply. Preferably a USB port. - A touch or infrared sensor for temperature - Firmware/software program demonstrating the ...
Category: Electrical       

m****sia
 [?]
Sign in to view client's details.
| m****sia
|    United States
Fixed Price: $500 - $1,000   |  Posted: 7h, 58m ago  |  Ends: 14d, 16h  |   0 Proposals
Hi, i am looking for some one who can help & design complete hardware to insert text into cctv video camera. Input : from POS system link shows exact final output.   [obscured]  /watch?v=wzkPFapw88A Thanks.
Category: Electrical       

1****in9
 [?]
Sign in to view client's details.
| 1****in9
|    United States
Fixed Price: Not Sure   |  Posted: 9h, 33m ago  |  Ends: 14d, 14h  |   1 Proposal
I need a complete camera case design that meets standard carry-on requirements of all airlines. General specs for carry on are 22x14x9 inches and 15#. This bag needs to safely and securely house a dji phantom 3 (including controller, charger and 2 batteries), a canon rebel t3i with a 17-40 mm lens, an 8-15 mm lens, a gopro camera and some accessories such as cables, gorillapod, feiyu wearable gimbal and battery charger. Drones are usually housed in dense foam and camera gear is usually housed in padded compartments but I cannot find a design that will house both with required specs. Example of drone storage:   [obscured]  /HPRC-HPRC2700WPHA3FO-Custom-Phantom-Black/dp/B00ZL3F2UY/ref=sr_1_1?ie=UTF8&qid=1441242471&sr=8-1&keywords=phantom+3+foam&pebp=1441242470657&perid=1HW0BBTQNFNBSJFA2MNG Example of camera storage;   [obscured]  /products/shootout-backpack-le-small-black.aspx Prefer ability to switch out camera gear as necessary; so prefer hou...
Category: Product Design       

r****a15
 [?]
Sign in to view client's details.
| r****a15
|    United States
Fixed Price: Not Sure   |  Posted: 13h, 0m ago  |  Ends: 2d, 10h  |   0 Proposals
Hello, I wanted to know if you could help me. I'm designing a new product that needs an internal power generation. My research has steered me towards "disc type axial flux generators /motors". See attached sketch idea. Basically I need a test bed to prove theory I have based on the contrasts that are given. I can't fully describe the entire design but part of it needs to generate electricity and output it to a outlet, which kind of mimics a typical low voltage wall outlet performance you would find at a normal house. The initial device constraints was to have a cylinder can design with a max diameter of 3.5 -5 inches, and have the device be very light weight, and requiring very little force to spin the axial flux inside. I have not specified a height yet this is all a idea in testing phase. What I'm requesting is a design or instructions to create a test bed in my shop and so I can build and tested it, the shape and design are critical. This is a generator, I will ...
Category: Electrical       

m****478
 [?]
Sign in to view client's details.
| m****478 *
|    United States
Fixed Price: Less than $500   |  Posted: 14h, 20m ago  |  Ends: 2d, 9h  |   20 Proposals
We have done the floor plans in autocad and now we need to do the interior architectural elevation drawings for each of the 3 floors. I have the Autocad file for you to referance. We need this project done professionally and quickly. please let me know if your interested in this project as we need to start asap.
Category: CAD       
Skills: Drafting       

M****oup
 [?]
Sign in to view client's details.
| M****oup
|    Canada
Fixed Price: $25 - $75   |  Posted: 14h, 54m ago  |  Ends: 14d, 9h  |   2 Proposals
i need shoe patent drawing for shoe i have 3ds max model and i can share the drawings must be consistent with the USPTO standard please share some sample of previous work
Category: CAD       

e****yed
 [?]
Sign in to view client's details.
| e****yed
|    Egypt
Fixed Price: Not Sure   |  Posted: 15h, 4m ago  |  Ends: 14d, 8h  |   6 Proposals
I'll need someone who create a piece of software for me (including GUI). It won't be very complicated, it will required: -reading some data from an excel file -doing some basic calculations with that data (converting some times from minutes to second, doing average, etc) -Once that is done you'll have to do a number of iterations applying some special features (coeficients in each iteration, "if", etc) My budget is very limited for this one, approx $100 With regards to the time frame, I'm not in a hurry, so...let's say 2 weeks ? (hope this help to reduce the price) I will provide more details upon request. Cheers
Category: Mechanical       

p****785
 [?]
Sign in to view client's details.
| p****785
|    United Kingdom
Fixed Price: Less than $500   |  Posted: 15h, 22m ago  |  Ends: 14d, 8h  |   20 Proposals
Hub less Bicycle concept drafted from my drawing to exact measurements, file must be fit to take to fabrication for a working model need finished in five days
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

K****ozi
 [?]
Sign in to view client's details.
| K****ozi
|    United States
Fixed Price: Not Sure   |  Posted: 16h, 20m ago  |  Ends: 14d, 7h  |   13 Proposals
I have an idea for a product, but can't seem to come up with the right design. I need the help of an expert to help complete the design. I will attach a list of what the product will have.
Category: Product Design       

t****093
 [?]
Sign in to view client's details.
| t****093 *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 16h, 36m ago  |  Ends: 29d, 7h  |   2 Proposals
Imperium, Inc. is presently contract work by a Senior Mechanical Engineer with a minimum of 10 - 15 years of mechanical instrumentation and device experience. Experience to include full life cycle precision product development from concept into production, human engineering design, layout and drawing generation, working with vendors, validating prototypes, and providing sustaining assistance with production released products. 7 years Solidworks experience required. Handheld rugged instrumentation development experience preferred. Candidates must be in the Washington DC or Baltimore area. Candidate shall be capable of collecting and maintaining requirements in electronic format, developing concepts, design layouts, and calculations to support design concepts. Must have good communication skills, require little or no supervision, and possess exceptional creative skills. Optimal additional areas of experience include basic motion control and mechanism design, optical design and indu...
Category: Mechanical       
Skills: SolidWorks, 3D Design, Packaging Design, thermal       
Preferred Location: United States

b****ser
 [?]
Sign in to view client's details.
| b****ser
|    United States
Fixed Price: Not Sure   |  Posted: 16h, 45m ago  |  Ends: 14d, 7h  |   8 Proposals
Hello, I'm looking for mechanical engineering to join me on upcoming projects. Current project revolves around sheet metal housing. Only people with a strong portfolio will be considered. The ability to speak with me through SKYPE is a must. Thank you all for your time.
Category: Mechanical       
Preferred Location: North America

c****els
 [?]
Sign in to view client's details.
| c****els
|    United States
Fixed Price: Not Sure   |  Posted: 17h, 18m ago  |  Ends: 14d, 6h  |   8 Proposals
Run FEA on linkage castings as described by our engineer. Produce reports as requested by our engineer. Part files and description of FEA parameters will be provided. Please fill out and sign the attached nondisclosure agreement so that we can post the files and have you quote the job.
Category: Mechanical       
Skills: Finite Element Analysis       

r****may
 [?]
Sign in to view client's details.
| r****may
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: 18h, 26m ago  |  Ends: 14d, 5h  |   16 Proposals
I have some CAD models that are very basic, non-colored 3D models in the shape of trophies. I need to hire someone to add color and designs to them for use in a promotional video. There are three different trophy models, two just need to have color added and the third needs to have six different designs applied (baseball, basketball, soccer, golf, bowling, and tennis).
Category: CAD       
Skills: ArchiCAD, 3D Systems       

Q****dio
 [?]
Sign in to view client's details.
| Q****dio
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Sep 02, 2015  |  Ends: 13d, 21h  |   14 Proposals
Hi, I'm looking for an engineer to assist me with some research tasks. Please see the attachment. Regards Milad
Category: Mechanical       
Skills: Mechanical Engineering       

D****eld
 [?]
Sign in to view client's details.
| D****eld
|    Australia
Fixed Price: Less than $500   |  Posted: Sep 02, 2015  |  Ends: 13d, 17h  |   6 Proposals
I am looking for a manufacturer that can provide me with prototypes of an iPad case/strap made out of rubber/silicone. I have 3 professionally made 3d images bad on my design to provide you with. I can give approximate sizes but without knowing how soft or flexible the rubber/silicone material is i will need to rely on the manufacturers knowledge and help with their materials. Initially i would only be looking for 3 prototypes for the Kindle or iPad mini designs. Please contact me with an approximate price, time frame and any information you feel may be useful relating to the process.
Category: Product Design       
Skills: Manufacturing       

w****dia
 [?]
Sign in to view client's details.
| w****dia
|    Australia
Fixed Price: Not Sure   |  Posted: Sep 01, 2015  |  Ends: 1d, 16h  |   29 Proposals
I have a PCB that needs a redesign + improvement. It will need to be coded from scratch but it's a simple device. Looking for someone who can do it within 2 weeks as it's a priority job.
Category: Electrical       

t****gak
 [?]
Sign in to view client's details.
| t****gak
|    Australia
Fixed Price: $75 or less   |  Posted: Sep 01, 2015  |  Ends: 13d, 15h  |   14 Proposals
I have a design consisting of a metal and plastic part that is snapped together. I need an FEA analysis completed to determine the design will withstand 1,000 cycles given a set displacement of the ends. Model can be given in multiple formats. Native files are solidworks 2014. The assembly will have 2 components, one metal and one plastic. The parts are semi-circular in shape. NDA will be required.
Category: Mechanical       

t****eng
 [?]
Sign in to view client's details.
| t****eng
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: 1-3 months  |  Posted: Sep 01, 2015  |  Ends: 1d, 15h  |   7 Proposals
We are in early stage conceptual plan development for a 5 story wood frame 8 unit apart/condo building in Washington D.C. We are looking for an individual with 20+ years of construction management experience to consult with us on design/cost issues as we develop our conceptual designs and work with local permitting agencies. We have not identified a local GC yet and want to make sure we get good cost/strategic CG input from our consultant to guide us until we find a local GC. We would anticipate this team member could provide project scheduling (MS Project) schedules as well as develop our construction cost estimates etc. We have developed some preliminary conceptual designs and identified some issues requiring waivers for egress and a variance for parking. We are moving forward on filing for hearings on these matters and want to get some construction cost input in the interim so we can revise/update our conceptual plans while we wait for the two hearings. We would anticipate a...
Category: Other - Engineering &...       
Skills: AutoCAD       

s****ada
 [?]
Sign in to view client's details.
| s****ada
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job