Save this Search
     
Sort by:
  • Posted Date
Posted: Within 7 days
Fixed Price: Less than $500   |  Posted: 3h, 41m ago  |  Ends: 14d, 20h  |   4 Proposals
Can you design a product, close to, but does not have to be exactly like the drawing attached? As many parts as possible should be standard, "off-the-shelf" components that might be sourced separately from alibaba. For example, I have included a motor that should be perfect for this small vacuum that is designed to collect small bugs. The damper would be opened, then the switch engaged to create the vacuum, the bug is sucked up and then the damper is closed, trapping the bug or bugs. Then the front tube can be removed, the damper opened, and the trapped bugs disposed of. What parts cannot be sourced standard will need to have drawings and technical specifications sufficiently detailed to obtain bids for sourcing. Also, assembly instructions would need to be included as well as the required hardware.
Category: Product Design       
Skills: Manufacturing Design       

f****isp
 [?]
Sign in to view client's details.
| f****isp
|    United States
Fixed Price: Not Sure   |  Posted: 7h, 41m ago  |  Ends: 14d, 16h  |   0 Proposals
We are looking for someone to design a simple satellite receiver circuit. This would be used for obtaining audio only from FTA satellite transmissions. The output from the LNB would connect to this circuit and the output from the circuit would be a two channel analog audio signal for passing to an amplifier. The circuit would hence include satellite tuner, qpsk demodulator, and mpeg-ts decoder. Selection of the desired frequency would be via microprocessor. The deliverables would be: - A schematic of the circuit. - C++ program for controlling the circuit for the specified microprocessor.
Category: Electrical       

Y****ber
 [?]
Sign in to view client's details.
| Y****ber
|    South Africa
Fixed Price: Not Sure   |  Posted: 12h, 52m ago  |  Ends: 14d, 11h  |   2 Proposals
Hi, I need to create a circuit board and the schematics for a smart watch. If you decide to work with me we can talk more about the features so we can have a better communication for the project. Thank you!
Category: Product Design       

a****223
 [?]
Sign in to view client's details.
| a****223
|    United States
Fixed Price: $500 - $1,000   |  Posted: 14h, 27m ago  |  Ends: 14d, 9h  |   3 Proposals
I am looking for quotes to build a prototype facial recognition device using Raspberry Pi. Features: Setup Mode: 1. Take initial photo of person. 2. Enter person's name. Tracking Mode: 1. While camera is active, recognize face against setup photo and log who it was. Deliverable: 1. Components needed to setup the raspberry device (camera, lcd display, etc). 2. Program with features listed.
Category: Product Design       
Skills: Raspberry Pi       

d****gal
 [?]
Sign in to view client's details.
| d****gal
|    United States
Fixed Price: Not Sure   |  Posted: 17h, 37m ago  |  Ends: 6d, 6h  |   14 Proposals
Hi, I have a CAD file of a small part that I need to have Metal Injection Molding according to these design guidelines:   [obscured]  /metal-injection-molding/design-guidelines Currently, the file has not yet been "designed for manufacture." If you can convert my CAD design into a design that is ready for Metal Injection Molding then please answer the following: How many parts have you Metal Injection Molded If you are interested in the project, I will send you the CAD file to get a more specific quote.
Category: Product Design       

D****en5
 [?]
Sign in to view client's details.
| D****en5
|    United States
Fixed Price: $250 - $300   |  Posted: 18h, 55m ago  |  Ends: 14d, 5h  |   7 Proposals
We are looking for a pioneer engineer that is good in the area of protoyping small scale wood milling CNC machine using microcontroller and also having the ability to make an autocad drawing of the parts need Thanks for looking at our proposal
Category: Product Design       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       

k****hop
 [?]
Sign in to view client's details.
| k****hop
Fixed Price: $1,000 - $5,000   |  Posted: May 29, 2015  |  Ends: 13d, 22h  |   9 Proposals
# Summary We are looking for the design of a small-sized battery management system for Lithium Polymer batteries. # Description The batteries are integrated into several systems used in agricultural and semi-industrial environments which means that customers expect the equipment to be very easy to use. Currently, batteries intended for remotely controlled vehicles are used which has the advantage of having a high power to weight ratio but the downside of being cumbersome to use. # Requirements Thus, in the final design of this job we are looking for the following: * Automatic balancing of a 6S LiPo battery pack while charging * Status reporting on: * Current state of charge (Fuel Gauge) * Current flow * Voltages of individual cells * Number of charges / discharges * Health Monitoring These functions should be integrated into a small & lightweight PCB that can be added to a pre-existing LiPo battery pack.
Category: Electrical       
Skills: Electrical Engineering, PCB Design       
Preferred Location: Western Europe, Eastern Europe

i****mbh
 [?]
Sign in to view client's details.
| i****mbh
|    Germany
Fixed Price: Less than $500   |  Posted: May 29, 2015  |  Ends: 13d, 22h  |   6 Proposals
Hi, I need someone who is an expert with solar panels and has a fantastic understanding of all of the solar panels that are on the market. I am looking to put solar panels onto a small vehicle tracker. I am expecting that these devices will receive 1-2 hours of daylight per day and 3 hours of low/ artificial light per day. I am trying to minimize the $/watt of the panels. One important limitation is that all of these panels must fit onto a 13 square inch surface area or about the size of an iphone 6. Thanks!
Category: Electrical       

c****t06
 [?]
Sign in to view client's details.
| c****t06
|    United States
Fixed Price: Less than $500   |  Posted: May 29, 2015  |  Ends: 13d, 20h  |   5 Proposals
We need some one who can perform a computer simulated drop test for a packaging product. It is a part molded from polypropylene to protect the corners of desk tops during shipping. See attached PDF. We need to know if the part as designed will adequately protect the corners of a desktop if the top is dropped during shipping. I can supply the necessary parameters for the test.
Category: Product Design       
Skills: Computer Engineering       

g****ney
 [?]
Sign in to view client's details.
| g****ney
|    United States
Fixed Price: Less than $500   |  Posted: May 29, 2015  |  Ends: 5d, 19h  |   53 Proposals
Hello, I have an ongoing requirement for Solidworks models and drawings to be generated. Sometimes these will be from hand drawn sketches, and sometimes from other CAD documents. I need someone who can respond to something like "Get this part modeled (either from a file form the manufacturer or done yourself form a 2D CAD drawing), along with this other part in this configuration and generate a drawing" This inquiry is to establish a relationship with a freelancer who I hope to be able to give regular, if small amounts of work to. I'd like to agree a fixed price for each individual job at its outset. Anyone interested in bidding should reply giving an idea of total cost for the project. Just to prove you have read what I have typed, (you really would not believe how many people don't!) please include the word Cheadle in the first line of your proposal. Any samples of work you can send through will be great Thanks Paul
Category: CAD       
Skills: SolidWorks       

p****084
 [?]
Sign in to view client's details.
| p****084
|    United Kingdom
Fixed Price: Less than $500   |  Posted: May 29, 2015  |  Ends: 13d, 17h  |   2 Proposals
I want to interface 40 Kg Load cell interfacing with Arduino for 1 gram accuracy.Please send your proposal with detailed explanation about this project. Load cell: CZL 601,Precision : 0.02
Category: Electrical       

S****ies
 [?]
Sign in to view client's details.
| S****ies
|    India
Fixed Price: Not Sure   |  Posted: May 29, 2015  |  Ends: 13d, 17h  |   10 Proposals
I need someone who can draw below top in Solidworks.   [obscured]  /product/4XWHE4H85/spinning-top?li=search-results-1&optionId=42288546 However grip part wil be in below design:   [obscured]  /wp-content/uploads/2011/09/Zebra-F701-Grip.jpg - Solidworks 2012 needs to be used. - I need both CAD and technical drawing. Thanks,
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

e****r87
 [?]
Sign in to view client's details.
| e****r87
|    Turkey
Fixed Price: Not Sure   |  Posted: May 29, 2015  |  Ends: 13d, 13h  |   5 Proposals
AIM - To make circuit using sonar(distance sensor) as input which will be deployed in fast moving vehicle and to take output in form of vibration and display Objective - Sensors should be sensitive with range of .1m to 3 m. Need to know the options with respect to quality and cost Circuit should be designed with input from sonar and output as vibration(closer object gets, more vibrant it should become), and color changing LED (changing color from red to yellow to green) The power to be supported by solar films as well from external battery. The communication should be wireless for LED display as well for vibration module if possible Kindly let me know if more details are required. Thanks and Best Regards
Category: Electrical       
Skills: Integrated Circuits, Electronics       

N****nGR
 [?]
Sign in to view client's details.
| N****nGR
|    India
Fixed Price: $50 - $80   |  Posted: May 29, 2015  |  Ends: 13h, 23m  |   5 Proposals
need expert in math - communication engineer in order to derive some formulas more details as in attached file.
Category: Electrical       

m****lab
 [?]
Sign in to view client's details.
| m****lab
|    Jordan
Fixed Price: Less than $500   |  Posted: May 29, 2015  |  Ends: 13d, 12h  |   40 Proposals
I am looking for someone to combine two 2d files and the attached pictures into a final water tight stl, ads or dxf 3d file. While the final file should be accurate this is not an extremely precise model that is required and the 2d files will likely take a little explanation. The final product will be a paddle. I am looking for a quick turn around of roughly 2 days.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, Autodesk, 2D Design       

J****s13
 [?]
Sign in to view client's details.
| J****s13
|    United States
Fixed Price: Not Sure   |  Posted: May 29, 2015  |  Ends: 13d, 12h  |   6 Proposals
Hello, i will make a big expo in LA conference center in Junary, and I am going to make a big technologycal revolution in the conferences, I will make the enter tickets for different, it wont be a peper, it will be a special bracelet, the one will have an encriptation chip or barcode, the one will function like a money wallet and permition wallet, this is because there will be recharge zones that will be able to recharge the money in it and in that way you wull be able to waste money in the Expo. In the permition there will be a lot of types, there will be the standar type, the vip type, the exhibitor, the logistic personal and the organizators, and there will be a different level of permition. the brazalet has to work without internet, something like a credit card, in this chase the database is going to be make by the person who will program the page, nd you have to integrate the serial system of the brazalet with the database, it must to be automatic, no human necesity to make that. ...
Category: Product Design       

d****gue
 [?]
Sign in to view client's details.
| d****gue
|    Venezuela
Fixed Price: Not Sure   |  Posted: May 28, 2015  |  Ends: 13d, 9h  |   12 Proposals
Looking to get some fresh ideas on a product that will move a 5lb object in a straight line for a minimum distance of 36". If your idea can also include a radius movement when desired, it will be a great feature. The whole apparatus need to be suspended/fixed preferably in 1 support point but if that's impossible, then maximum 2 support points would be needed. This project can be an articulated arm or whatever you can come up with but preferably we are not looking for it to be a slider or dolly on track. If you can't design a 3D model but still have a good idea, you can present sketches or anything that can be developed further since the project is intended to be manufactured in the long run. Please provide us with a quote and time of execution and if you need more details about this, we can provide it by email. (Check attachment) Thanks and looking forward to working with you
Category: Product Design       

n****huu
 [?]
Sign in to view client's details.
| n****huu
|    United States
Fixed Price: Not Sure   |  Posted: May 28, 2015  |  Ends: 5d, 4h  |   15 Proposals
Hi I am looking to hire a CFD engineer with experience in managing high and low pressure air flow. One of my biggest challenges is that the pressure needs to be created using low rpms. Before any analysis takes place, I have 4 questions which relate to the project which I am willing to pay someone to answer. If you are happy to sign an NDA, I would love to work with you. I appreciate your knowledge in this area and thank you for your assistance.
Category: CAD       
Skills: 3D Modeling, ANSYS, AutoCAD, SolidWorks       

T****ash
 [?]
Sign in to view client's details.
| T****ash
|    United Kingdom
Fixed Price: Less than $500   |  Posted: May 28, 2015  |  Ends: 13d, 2h  |   5 Proposals
i need a complete vedio tutorial with examples of how to use STM32 nucleo F411RE with sensor shield to and an open source compiler to build the following: 1- RTOS concepts and overall explanation explained for first time user with small embedded system back ground. 2- Setup, IDE ,library and compilation instruction 3- example: 3 threads for LED with full explanation 4- Example: multi threads for thread1: Buzzer song thread2: two dc motor with encoders that turns 10 turns, then stops, 5 then stops, then keep repeating. 5- Example : thread1: Stepper motors controlled by 2 buttons for up/down direction control (half rotation per press) thread2: 2 servo motors controlled by 2 IR sensors thread3: RTC serial printing current time on terminal. 6- other important examples Important notes: * All vedios should be private and in english. * All documents should be in .doc formal * money will be released after making sure all information given is complete and correct. * i will a...
Category: Electrical       
Skills: Electronics, Embedded Systems, Robotics, RTOS       

K****RDA
 [?]
Sign in to view client's details.
| K****RDA
|    Kuwait
Fixed Price: Not Sure   |  Posted: May 28, 2015  |  Ends: 5d, 2h  |   0 Proposals
We are looking for the design and/or procurement of an harness which would be used to support our industrial instrument and allow an operator to support & operate the instrument while freeing both of his hands. The instrument has a touch screen interface, therefore the position on the harness must facilitate its operation. The instrument is of the following dimensions and weight: - Dimensions (W×H×D): 355×288×127 mm (14.0×11.3×5.0 in) - Weight: 6.6 kg (14.5 lb) The harness should be robust and ergonomic for its daily industrial life usage. The harness should be used in the following environmental conditions: - IP rating Designed for IP65 - Operating temperature 0?40 °C (32?104 °F) - Operating humidity 95 %, non-condensing - Compliance ASME, EN 61010-1, CE, WEEE, FCC Part 15B, ICES-003, AS/NZS CISPR 22, RoHS We initially have tested harness designed for camera (see Kinésis Photo Gear H717). The solution is good with our instrument but we are looking for a better adapted sol...
Category: Product Design       

M****yfi
 [?]
Sign in to view client's details.
| M****yfi
|    Canada
Fixed Price: Less than $500   |  Posted: May 28, 2015  |  Ends: 13d, 0h  |   8 Proposals
I am looking for an individual to develop a conceptual design for a case that will be used to protect an autopilot used on Unmanned Aerial Vehicles (UAVs). Job Responsibilities: -Develop/deliver 1-2 case designs complete with CAD files -Deliver CAD files that are compatible with SolidWorks, Fusion 360, and standard 3D printers -Take into consideration the end user of the product in order to design a case that is both functional and aesthetically appealing -Understand how the product will be manufactured/used and translate that into the design Job Qualifications: -Must have experience with CAD -Must have 3D printing experience -Some knowledge of drones and unmanned aerial systems is desirable -Basic knowledge of standard IP68 wire/pin connections is desirable
Category: CAD       

n****zle
 [?]
Sign in to view client's details.
| n****zle
|    United States
Fixed Price: Less than $500   |  Posted: May 28, 2015  |  Ends: 4d, 23h  |   27 Proposals
Hello, I'm looking for someone to convert my drawings/sketch to a CAD file so it can be read by a water jet machine. Item is a bottle opener. Will need file translated into multiple formats including .pdf, jpg, and .dxf. **** I will only work with designer located in the USA **** Looking for someone to establish a long term business relationship. My other designer is too busy and currently not taking new jobs. Looking for his replacement. I will have more jobs coming up for you as well. Thank you!
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       
Preferred Location: United States

b****inc
 [?]
Sign in to view client's details.
| b****inc
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job