Save this Search
     
Sort by:
  • Posted Date
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: 40 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
Installation of two units GE.MS9001E. ? Installation of two unit Transformer 160 MVA each. Step-up Transformers(15KVA to 132KVA) ? Installation and Assembling of two 10 MVA Transformers (11.5KV / 6.9KV). ? Installation and Assembling of 132 K.V Switch Yard Equipment. ? Installation and Assembling of 6.6K.V Switch Gears Panels (G.E.). ? Installation and assembling of 0.4 K.V switch gears Panels.(G.E) ? Installation of cable Trays for Power cables and control cables indoor, outdoor and in the cable Trenches. ? Power and Control cables lying and termination in Whole plant for Different Auxiliary systems ? Installation of cable Trays for Power cables and control cables indoor, outdoor and in the cable Trenches. ? Power and Control cables lying and termination in Whole plant for Different Auxiliary system
Category: Electrical       
Skills: Adobe Photoshop       

h****u99
 [?]
Sign in to view client's details.
| h****u99
|    Pakistan
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: 2h, 39m ago  |  Ends: 1d, 21h  |   1 Proposal
1. Need help laying out physical paper words and data on to excel so it can be print friendly. Need to input words and data as well as matching the actual spacings and margins as the paper copy. 2. Need help data entry and upload product images to website. 3. Need the 1st work to be done asap. Thank you! Please contact
Category: Electrical       
Skills: Data Entry, AutoCAD, Google Maps, Drawing, Tamil       
Preferred Location: Kuwait

n****986
 [?]
Sign in to view client's details.
| n****986
|    Kuwait
Hourly Rate: $15 - $80 / hr   |  Duration: 1-2 weeks  |  Posted: 10h, 58m ago  |  Ends: 6d, 13h  |   1 Proposal
Highly Skilled Fashion Designer needed with photoshop and Solidworks skills to complete beach/lingerie attire with embedded stones. Must be able to take high resolution photo of sample fabric, and apply to stock model, along with embedding stones into design. Renderings must be very realistic, and solid works files for the clothing article/jewelry would be preferred. Must provide fashion design-like sketches, renderings, and if possible solid works files of the jewelry that will be designed.
Category: Product Design       

S****pps
 [?]
Sign in to view client's details.
| S****pps
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: 11h, 6m ago  |  Ends: 14d, 12h  |   3 Proposals
a piston that is run with an air pump, and a heating strip. I want to tie all three together to an existing PLC. I need an electrical engineer to make sure the voltage and amps balance with the PLC.
Category: Electrical       
Skills: Electrical Engineering, Electronics       

P****289
 [?]
Sign in to view client's details.
| P****289
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 15h, 59m ago  |  Ends: 14d, 8h  |   1 Proposal
Ladder programming for direct logic 06 PLC. Objective is to setup an operating Modbus master to read and write holding registers with a slave PLC. Must have experience with direct logic PLC and Modbus TCP.
Category: Electrical       

h****ool
 [?]
Sign in to view client's details.
| h****ool
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 16h, 52m ago  |  Ends: 14d, 7h  |   45 Proposals
I am looking for a SolidWorks expert to model parts for me on an ongoing basis. I am looking for a SolidWorks expert who pays attention to detail and can work from vendor data sheets to create accurate models. This will be a per project job but is expected to be an ongoing arrangement. EXAMPLE - I would send you a data sheet, or website with information on the desired part. - You would first try to find the model online. If found you would carefully confirm that the dimensions are accurate - If no model is available you would create a detailed model of the part Parts will be electrical components (chips, capacitors) and mechanical components REQUIREMENTS - Knowledge and Access to SolidWorks (non-student edition) - Ability to make parts - Ability to make assemblies Thank You Bobby
Category: CAD       
Skills: 3D Modeling, SolidWorks, 3D Design, 3D Rendering       

B****579
 [?]
Sign in to view client's details.
| B****579
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 17h, 27m ago  |  Ends: 14d, 6h  |   9 Proposals
A home care ear wax removal product that provides a user to both self-examine their ears for ear wax by use of the products patented self-exam otoscope features while they remove the ear wax with designed specula tips that effectively remove the ear wax from the ears.
Category: CAD       
Skills: 3D Design       

W****ag1
 [?]
Sign in to view client's details.
| W****ag1
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 15, 2014  |  Ends: 13d, 21h  |   0 Proposals
president, vice-president, executive officer (CEO); director, deputy director, managing director, financial director, marketing director; general manager, assistant manager, manager; personnel manager, production manager, marketing manager, sales manager, project manager; supervisor, inspector;
Category: Electrical       

s****hus
 [?]
Sign in to view client's details.
| s****hus
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: Not Sure  |  Posted: Apr 15, 2014  |  Ends: 13d, 18h  |   3 Proposals
I want to design a iPhone 5 Case that has slots to accept power from the following potential power cords: +iPhone 4 +Apple notebook +Regular USB +Samsung Galaxy S4 +LG G2 +Nokia Lumia 520 +HTC One I want the case to have slots for each of these cords to plug into. Each slot would be covered by a plastic fin. My hunch is for this to work, each of these slots could lead to a central charging pad (see enclosed photo of charging pad) that is sandwiched between the phone and the case (ie the charging pad is on the inside of the case). I enclosed hand drawn sketches of what I had in mind. Please pardon the chicken scratch. If you have any questions let me know. Need electrical engineer to design manufacture ready CAD for this. To apply, please send application listing experience, word 'elephant' towards the beginning of your application, and whether you think the charging pad is the best solution for this challenge. Don't do hours of research upfront to find the best solution for this a...
Category: Electrical       

m****le7
 [?]
Sign in to view client's details.
| m****le7
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: Apr 15, 2014  |  Ends: 13d, 17h  |   22 Proposals
I have an idea for a novel fruit picker that will reduce the effort required to pick fruit. I need help building a prototype. I have drawings that will need refining and possibly modeling but the main desire is to develop a proof of concept prototype that works. I don't have a patent so will require that an NDA be signed. The finished output should be a working fruit picker based on my design (I will pay for shipping of course).
Category: Product Design       

r****ons
 [?]
Sign in to view client's details.
| r****ons
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 14, 2014  |  Ends: 13d, 16h  |   53 Proposals
We are looking for Microstation and Autocad Drafters to work for us on a casual and ongoing basis. We have offices in Makati, and Malolos (Philippines). However, you are welcome to work from your preferred location. We will primarily require electrical drafters, but also have requirements for mechanical/civil/architectural etc. using various software.
Category: CAD       

K****lia
 [?]
Sign in to view client's details.
| K****lia
|    Australia
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: Apr 14, 2014  |  Ends: 28d, 15h  |   4 Proposals
need an electrical engineer that is skilled in PLC programming. They need to be familiar with allen bradley control logics and compact logics plcs. Well versed in analog I/O and servo motor control. Also need to be able to manage electrical contractors.
Category: Electrical       
Skills: PLC programming       
Preferred Location: United States

c****aju
 [?]
Sign in to view client's details.
| c****aju *
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Apr 14, 2014  |  Ends: 13d, 15h  |   22 Proposals
I'm looking for an engineering consultant to redesign several existing medical devices into a more compact, single unit roughly the size of your palm. We are looking for a creative thinker that is familiar with basic mechanical methodologies and has a creative mind. We already have several prototypes but want a fresh set of eyes to suggest alternative solutions that are practical, cost effective and aesthetically pleasing. We would expect you to sign a non-disclosure agreement prior to providing details of the product. We are seeking a straight consulting project of several hours at this point and would envision sending you our diagrams, giving you some time to think and then reviewing possible solutions, ideally via skype.
Category: CAD       

j****fin
 [?]
Sign in to view client's details.
| j****fin
|    Canada
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: Apr 14, 2014  |  Ends: 13d, 9h  |   10 Proposals
We have been through several design and prototype manufacturing stages. We need someone who can assist with final CAD design and materials manufacturing knowledge to complete the prototype. There are about 30 prototypes already made with aluminum and silicone. We need to alter a portion of the design due to new requirements. We are funding the prototyping ourselves but once we make this alteration we intend on putting the final product on Kickstarter as a mobile technology accessory.
Category: CAD       

r****omo
 [?]
Sign in to view client's details.
| r****omo
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 14, 2014  |  Ends: 13d, 8h  |   2 Proposals
I am looking for someone with experience undertaking lifecycle environmental analysis to help put together a summary of LCA performance information across a wide range of products using industry standard software and platforms. I am looking at products spanning a number of different sectors and would like to approximate LCA analysis for each of them in a consistent fashion - the focus is on orders of magnitude and differences between categories rather than the details of product design or material choices. Experience of undertaking LCA is vital, as is familiarity with one or more of the databases available for this analysis. Please reply with information on your experience. Further details of the project will follow.
Category: Product Design       

a****how
 [?]
Sign in to view client's details.
| a****how
|    United Kingdom
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Apr 14, 2014  |  Ends: 13d, 5h  |   25 Proposals
We are an elevator entrance frame & door company. Have been in the installation aspect of the business, now looking to get into the manufacturing of elevator doors and frames. We are looking for a Mechanical Engineer that can create an autocad drawing of the elevator entrance and door.
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       
Preferred Location: United States

k****915
 [?]
Sign in to view client's details.
| k****915
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 14, 2014  |  Ends: 13d, 4h  |   50 Proposals
I am looking for an engineer to build CAD files for an invention that I created. We are in the prototype phase of building the product and would like to find an engineer to work with throughout the process.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

b****ord
 [?]
Sign in to view client's details.
| b****ord
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 14, 2014  |  Ends: 13d, 2h  |   13 Proposals
I would like a circuit designed to produce a current with a specific voltage, waveform, and frequency. The design will be used to build a prototype. I will request a confidentiality agreement, provided by my organization, for the project. I may request several circuit designs afterwards with slight modifications, or seek advice when assembling the circuit.
Category: Electrical       

b****kdw
 [?]
Sign in to view client's details.
| b****kdw
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Apr 14, 2014  |  Ends: 12d, 23h  |   21 Proposals
Job would require the following * To take an existing house plan in a pdf or CAD file and make floor plan changes as per instructions from a screen capture video * Add this floor plan to a site map to produce a complete site plan with all measurements in metres or centremetres Must be able to turn these task around within 24 hours There will be plenty of work here that may lead to a full time position Must be able to follow instructions and complete with very little number of changes per task Must be available to skype, prefer using voice skype The designs will be be New South Wales, Australian standard building codes Original house plans in cad or pdf will be supplied
Category: CAD       
Skills: drafting       

t****nan
 [?]
Sign in to view client's details.
| t****nan
|    Australia
Hourly Rate: $15 - $30 / hr   |  Duration: 3-4 weeks  |  Posted: Apr 13, 2014  |  Ends: 12d, 9h  |   33 Proposals
Looking for someone who is proficient in auto CAD for lighting and furniture design. I have several designs to work from already and looking to add to my line. Several of the lighting designs are going to be modular and interchangeable. Will discuss more if an interested party wants to proceed. *note - all items need to be in production by May 31st *** production is in Mexico. If the perspective speaks Spanish, please note clearly to me in your response - as this is helpful for communication with my artisan. This is not a pre-reaquistie but an added quality.
Category: CAD       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       

D****rks
 [?]
Sign in to view client's details.
| D****rks
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 13, 2014  |  Ends: 12d, 6h  |   6 Proposals
I want a 3d model from 3d printing for prototype of a stock i have a 2d autocad layout out what i want designed. i have the step files of the reciever and trigger group that must fit inside it is for a ruger 10/22 i want it to be a kit where you use your 10/22 with my stock.
Category: Product Design       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       
Preferred Location: United States

r****003
 [?]
Sign in to view client's details.
| r****003
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 13, 2014  |  Ends: 11d, 23h  |   3 Proposals
Hi I am currently thinking of a product for which i need to get some first ideas of design. I want to design a cushion to put on the seat of the office chair. The finality of the cushion is not of importance at the moment. What is important is that the cushion must have the following characteristics : - It cannot slide off the chair. From my point of view there are 2 solutions : either the material "sticks" to the tissue / leather of the chair or the cushion has attachments to the chair. - It must be adaptable to the large majority of the chairs used in offices (just type "office chair" in google image). - It must have a ultra thin and cool design (example :   [obscured]  /fr/aura,   [obscured]  /fr/bodyanalyzer). I would like to start with black. I would like to get a quick first draft to get an idea what is possible. If the solution is good, I would then ask for a more detailed design. How long would this take you and how much would i...
Category: Product Design       

k****bek
 [?]
Sign in to view client's details.
| k****bek
|    Belgium
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Apr 13, 2014  |  Ends: 86d, 19h  |   2 Proposals
Optimization of power lost, improved of voltage profile in the radial distribution, analysis regime of power grid
Category: Electrical       
Skills: Electrical Engineering       

I****rrr
 [?]
Sign in to view client's details.
| I****rrr
|    Ukraine
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 12, 2014  |  Ends: 11d, 7h  |   19 Proposals
Looking for designer/engineer to help me turn my drafts into a complete CAD/3d model ready for manufacturing. 10 days work,approx. 1 hours per day Starting with the first model and corrections, additions and development on it. Looking for approx. 100 dollars fixed pay.
Category: CAD       

G****eS7
 [?]
Sign in to view client's details.
| G****eS7
|    United Kingdom
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Apr 12, 2014  |  Ends: 10d, 21h  |   20 Proposals
My name is Brandon Williams and I have a model that was built using SolidWorks 2014, but I need this model converted to SolidWorks 2013-2014 Education Edition ASAP! This can be done by either converting the file or rebuilding the model from scratch in the correct version. If you choose the latter, I will provide all supporting documents required to complete the job with a high degree of accuracy. The time table for the design is 24 hours or less! If you can handle this task please respond to me via email immediately! ***This is a one time Job!!!***
Category: CAD       

B****siW
 [?]
Sign in to view client's details.
| B****siW
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job