Save this Search
     
Sort by:
  • Posted Date
Electrical
Fixed Price: Less than $500   |  Posted: Mar 25, 2015  |  Ends: 9d, 16h  |   17 Proposals
I need help developing a simple locking mechanism for a product that I am creating. I short I need someone to help me conceptualise a lock built in to a hollow metal pole approximately 6cms in diameter which when in the open position lifts a small metal rod of approximately 1cm in diameter upwards by at least 3cms. I attach a rough outline of what I need to achieve. Mark
Category: Product Design       

M****ham
 [?]
Sign in to view client's details.
| M****ham
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Mar 25, 2015  |  Ends: 9d, 15h  |   101 Proposals
I need to do the following, for a total of 70 drawings: Take the original cad drawing, remove the image in the title block (which is the company logo) and put in a new one, and revise the name and date in the title block. Then PDF the drawing, and repeat for two additional company logos. So, there would be three .dwg copies of each drawing with a different logo on each, and three pdfs of the same. Repeat the above for the 70 drawings. There are no technical changes to the drawings, and I will provide the .ctb file to make sure the pdfs look like they should do.
Category: CAD       
Skills: AutoCAD, CAD/AutoCAD       

R****_HH
 [?]
Sign in to view client's details.
| R****_HH
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Mar 25, 2015  |  Ends: 9d, 14h  |   1 Proposal
I'm looking for a team of textile designers with a vast amount of experience in athletic clothing design. Looking to create a strong mens activewear line ranging from full zip hoodie, compression under garments, running shorts, long-sleeve, short sleeve, and much more. Please let me know if you have any interest in this as I can start communicating ASAP on what my goals are for this. Product Design - CAD - Manufacturing - Sourcing
Category: Product Design       
Skills: Adobe InDesign CS6, Textile Engineering       

r****t03
 [?]
Sign in to view client's details.
| r****t03
|    United States
Fixed Price: Not Sure   |  Posted: Mar 25, 2015  |  Ends: 9d, 14h  |   5 Proposals
Looking for homekit compatible pcb design with bluetooth wifi. Which Needs simple firmware. Based broadcom wice , marvell , or texas instruments. Homekit compatible chip Which has mfi licence from Apple.
Category: Electrical       

w****842
 [?]
Sign in to view client's details.
| w****842
|    Norway
Fixed Price: Less than $500   |  Posted: Mar 25, 2015  |  Ends: 9d, 14h  |   14 Proposals
I have a completed pendant design that I would like to have made into a CAD file for 3d printing/casting. I would like two separate files to be made - the same pendant in a small size and a bigger size.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

a****ery
 [?]
Sign in to view client's details.
| a****ery
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Mar 25, 2015  |  Ends: 9d, 12h  |   8 Proposals
I need a prototype created of a very specific solar charging unit. Details will be given once job has begun. Must be extremely well versed in solar energy and solar charges. Wattage for the charger must be high. Must be willing to sign consultant agreement and non-disclosure agreement. Must be able to create working prototype for solar charging unit. Rate to be discussed.
Category: Electrical       

J****sDo
 [?]
Sign in to view client's details.
| J****sDo
|    United States
Fixed Price: Less than $500   |  Posted: Mar 25, 2015  |  Ends: 1d, 7h  |   5 Proposals
Hi, I require a professional research proposal (3-4 pages), which includes viable and latest references (journal and conferences) in relation to: Stretchable / flexible Radio frequency IDs possible applications to such design. Aik
Category: Electrical       
Skills: Electrical Engineering, Electronics, RFID       

a****821
 [?]
Sign in to view client's details.
| a****821
|    Australia
Fixed Price: $50 - $100   |  Posted: Mar 25, 2015  |  Ends: 9d, 7h  |   3 Proposals
We require the design of a mechanical device to interface between a small, pedestrian operated loader and an earth auger. The device must allow the auger to be manually raised and lowered by a single operator along linear rail system or similar, and using readily available or simple to manufacture components). The auger must "lock" in its highest position to allow adequate ground clearance when moving the loader. A simple mock-up of the concept is attached. We have CAD drawings of the pedestrian operated loader available to the chosen applicant.
Category: Product Design       

T****oup
 [?]
Sign in to view client's details.
| T****oup
|    Malaysia
Fixed Price: Not Sure   |  Posted: Mar 25, 2015  |  Ends: 1d, 6h  |   20 Proposals
I need plans drawn for a small garden/bike shed for my front yard. It is to use two walls (side and back) of a brick (rendered) fence. Other 2 walls need to be weatherboard to match the house. The short side needs to be the lockable door. Concrete slab for floor.100mm thick, 25 mm above the surrounding tiles Dimmensions 1500mm witdth (this side needs to be the door - which I would like to be almost the full height of the shed) 2950mm length 2160mm height Have a look at my very basic drawing. Ignore 'floor as timber slats' - I want a concrete slab . The plant like features denote a small garden that will run down one side. The roof currently has a pergola like structure over 2/3 of it - this would need to be extended and attached to the roof of the house. the pergola structure over the top is covered with corrugated plastic sheeting. This would be used as the roof. I would like an electric light in the shed. Please let me know what your quote would be for the plans. Let me k...
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

p****ott
 [?]
Sign in to view client's details.
| p****ott
|    Australia
Fixed Price: Not Sure   |  Posted: Mar 25, 2015  |  Ends: 9d, 4h  |   39 Proposals
Each sheet to contain all information on sketch, such as external and internal walls, doors, windows, staircases, chimneys, stove, sink, bath, shower, floor levels labeled, main rooms labeled and dimensioned (except for bathrooms and any other rooms too small to contain clear text), North arrow, title block and borders. Wanted, price per room.
Category: CAD       
Skills: AutoCAD       

R****eld
 [?]
Sign in to view client's details.
| R****eld
|    United States
Fixed Price: Less than $500   |  Posted: Mar 24, 2015  |  Ends: 9d, 3h  |   8 Proposals
Hi, I'm a bit of a beginner on Gemvision Matrix 7 and have gotten stuck making a ring. I've started drawing a grid pattern on the ring and attempted extruding them but failed. What I want: - The pattern to be continued over the bottom of the ring - Extrude the pattern Bonus if you make a video of you demonstrating it The file on google drive:   [obscured]  /file/d/0B5s2yG1JOyIKQUZrb0lkTVlyTE0/view?usp=sharing
Category: CAD       

j****ery
 [?]
Sign in to view client's details.
| j****ery
|    Australia
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Mar 24, 2015  |  Ends: 9d, 3h  |   15 Proposals
Need to modify LED fixture design to complete the enclosure Lid and hinges. Select hinges, gasket, screws and other components Modify minor details of the design. The design in Solidworks.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

b****nie
 [?]
Sign in to view client's details.
| b****nie
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 24, 2015  |  Ends: 9d, 2h  |   12 Proposals
I would like to create a fitness product that is a weighted tensegrity dumbbell (see attached photo for concept of tensegrity). Normal dumbbells have weights on both sides, but I would this to be connected by bungee cords with each stull (bar) that is connected to be made of a thicker, heavier rubber.
Category: Product Design       
Skills: 3D, 3D Modeling, AutoCAD, 2D Design       

R****att
 [?]
Sign in to view client's details.
| R****att
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 24, 2015  |  Ends: 8d, 23h  |   17 Proposals
Simple hand drawn circuit needs to turned into protel for manufacture. 8 I/O and a diagnostic port. CMX200D3, a fuse, 5 passive surface mounts and Wago terminals.
Category: CAD       
Skills: Protel       

P****ald
 [?]
Sign in to view client's details.
| P****ald
|    Australia
Fixed Price: Not Sure   |  Posted: Mar 24, 2015  |  Ends: 23d, 23h  |   5 Proposals
Looking for an honest, hard-working, student electrical engineer who has the ability to design a prototype, source all parts, and assemble a working model of a small product. Payment for services and possible percentage of ownership involved.
Category: Electrical       
Preferred Location: United States

M****ion
 [?]
Sign in to view client's details.
| M****ion
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: Mar 24, 2015  |  Ends: 8d, 22h  |   8 Proposals
Hello! Thanks for checking out this project I have a small project that I need some CAD & rendering help with. The project consists of: A) Providing CAD drawings for a mixed media credenza-should take approximately 2 hours B) Providing CAD drawings for a steel & glass doorshould take approximately 2 hours C) Providing CAD drawings and rendering for a metal sconce-should take approximately 3-4 hours D) Providing CAD drawings for a lamp.should take approximately 2 hours E) I may need CAD drawings for architectural detailing TBD I will provide hand drawn specs and tear sheets to help with generating the CAD or rendered drawings. Will probably require one set of revisions after client has approved the initial design
Category: CAD       
Skills: 3D, AutoCAD, Autodesk Autocad Civil3D       

B****ble
 [?]
Sign in to view client's details.
| B****ble
|    United States
Hourly Rate: $20 - $80 / hr   |  Duration: Not Sure  |  Posted: Mar 24, 2015  |  Ends: 8d, 22h  |   8 Proposals
I am looking for a specialist, who is deep inside how are boosters and amplifiers for smartphones are working. I need answers, how each smartphone can increase the power and sound quality with an external device. There are different products available and I want to develop a new one. The focus is on a battery like from the wearables to become external power and will load it wireless as beats doing it. I need an offer for developing a PCB, produce and test with such battery and make it as small and as light as possible. It´s especially for boosting Ear sets, not for headphones (later we will develop also) We have some more ideas to develop in the same direction.
Category: Electrical       

m****ion
 [?]
Sign in to view client's details.
| m****ion
|    Bulgaria
Fixed Price: Less than $500   |  Posted: Mar 24, 2015  |  Ends: 8d, 21h  |   1 Proposal
Hello, We have a few mailchimp templates we are using which are all in the same design format. One email format is used as a RSS feed from our blog (currently feeding 4 articles a week when new ones are added) and the others are triggered automatically. We now want to make these templates responsive in design. We are also looking for someone that has the full understanding of how mailchimp works with wordpress (RSS feeds). Thanks, Cem
Category: Product Design       

c****vas
 [?]
Sign in to view client's details.
| c****vas
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Mar 24, 2015  |  Ends: 53d, 21h  |   7 Proposals
We have a serious problem in need of solution. We need a good chemical engineer to modify/create a special repellant for either hourly pay or a substantial stake in our company. Not more can be said at the moment. We are currently seeking prospects. Thank you for reading this post and have a great day.
Category: Product Design       
Preferred Location: North America

b****015
 [?]
Sign in to view client's details.
| b****015
|    United States
Fixed Price: Less than $500   |  Posted: Mar 24, 2015  |  Ends: 8d, 17h  |   1 Proposal
I need someone to désign me a wave brush for Black men hair. Not sure about what designs i want.
Category: Product Design       
Skills: Brand Licensing       

t****r25
 [?]
Sign in to view client's details.
| t****r25
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 24, 2015  |  Ends: 23d, 17h  |   16 Proposals
I am looking for an experienced and knowledgeable engineer to aid in the design and prototyping of an embedded system for a product we are planning on bringing to market. The design and components should closely mirror that of the Raspberry Pi Model A+, with some components removed and some added. In particular, we desire a pre-certified (FCC) wireless-n module and 4-8gb of eMMC or NAND flash. HDMI and two USB will also be required. A successful candidate will have the ability to provide a schematic of the design, will be able to aid in the component selection, will be able to produce a functional prototype and provide required support for internal embedded linux development. Milestones for the project are anticipated to be, (1) component selection in coordination with the client, (2) delivery of approved schematic and (3) delivery of functional prototype. Ongoing opportunities for a successful candidate may be available. Please fell free to contact us with any questions relating ...
Category: Electrical       

s****e11
 [?]
Sign in to view client's details.
| s****e11
|    United States
Fixed Price: Less than $500   |  Posted: Mar 24, 2015  |  Ends: 8d, 17h  |   4 Proposals
it is a brushless hobby motor designed for airplanes but has ALOT of torque and can handle unto 70A at my 25V nominal system. It is a 14 pole outrunner motor. We use 120 degree hall sensors to monitor position, rpm, I have just focused on current control and limits for acceleration. I use a PIC32MX250 micro controller Expert should apply which quick turn around. ready to hire now
Category: Electrical       
Skills: Electrical Engineering, Electronics       

E****ido
 [?]
Sign in to view client's details.
| E****ido *
|    Pakistan
Fixed Price: $500 - $1,000   |  Posted: Mar 24, 2015  |  Ends: 15h, 2m  |   26 Proposals
For this project we want to hire an electronic designer who has experience with Altium Designer. In attachment you will find the block diagram of the design. The person first need to draw the schematics. We will provide the libraries for doing this. For the components which are not into the libraries will be added by the freelancer. Before starting with the PCB design, the schematics will be reviewed by our design team.
Category: Electrical       

H****ens
 [?]
Sign in to view client's details.
| H****ens
|    Belgium
Fixed Price: $1,000 - $5,000   |  Posted: Mar 24, 2015  |  Ends: 23d, 14h  |   11 Proposals
I have never posted an ad before on a site like this so bear with me. Want to build an energy device. I have the plans to do this and they are from a very reliable source. I need help from an electrical engineer to complete this. Ideally you are in Missouri or Arkansas. However Skype could certainly mitigate that problem. I am 60 years old and have many skills including running a medium size company for 20 years. I am willing to pay well for the right person. Not a job that pays by the hour, rather a price agreed upon. If you are willing to consider the knowledge you will receive from the plans as payment that would be ideal, but not necessary. Could set that up so that there is no risk for you, such as payment first, if project is successful, refund for technology. Or other ideas or possibilities. Some of what you will learn is not taught in schools. But, I know you are looking because you need money. That is on the table. One more thing, it's not mechanical it's electronic. Also, don...
Category: Electrical       
Skills: Electrical Engineering, Electronics       

T****dom
 [?]
Sign in to view client's details.
| T****dom
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 24, 2015  |  Ends: 23d, 14h  |   28 Proposals
The wind doesn't always blow and the sun doesn't always shine! I am looking to disrupt the Alternative Energy sector by offering a more consistent form of green power. I have the idea in my head and I have created an extremely rough 3D model on SketchUp. I am looking for an engineer that can help me draft and create a 3DCAD model of my idea in SolidWork/Autodesk Inventor/Etc. Ideally, this person would be a problem solver who could look at my idea and let me know what would and wouldn't work and how we could solve any and all problems. As a quick note, I will have you sign a Non-Disclosure Agreement. I look forward to working with you soon!!
Category: Product Design       
Preferred Location: United States

J****zie
 [?]
Sign in to view client's details.
| J****zie
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job