Save this Search
     
Sort by:
  • Posted Date
Fixed Price: Not Sure   |  Posted: 27 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
needs help creating a tomato sauce maker. Will explain design further when contacted. design must be stainless steel, for commercial use, makes consistent product.
Category: Electrical       
Skills: Architecture, Mechanical Engineering       

M****cca
 [?]
Sign in to view client's details.
| M****cca
|    United States
Fixed Price: Less than $500   |  Posted: 1h, 16m ago  |  Ends: 14d, 22h  |   1 Proposal
We are seeking designer to design a bottle top that that fits on a large bottle, design has to allow the lid to clip around the bottle neck without retrofitting the bottle. The Lid must provide easy sealing/closure as shown in the example. Our example or prior art is to support the design concept and to show the look and feel of the end product we are asking to have designed. Need to be able to communicate with us to work out the design . Once the design concept is approved, the Designer will provide us the detail manufacture drawings, assembly drawings and presentation drawings for the finish product Must speak English / must have a Skype account for communication. To save time and to stream line this process, we will supply our Auto Desk invention drawings for the Flip Top design concept ,Drawings of the Large bottle , etc etc.
Category: CAD       
Skills: Autodesk Inventor, Autodesk       
Preferred Location: India/Southern Asia, Eastern Asia

o****005
 [?]
Sign in to view client's details.
| o****005
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 1h, 55m ago  |  Ends: 14d, 22h  |   0 Proposals
Looking for a redesigned concept and implementation of a short iphone charger cable. Similar to Twig, it should be short and serve its purpose. Let me know if this design and built interests you and I can share more information on what specifics I would require from it.
Category: Product Design       

z****alk
 [?]
Sign in to view client's details.
| z****alk
|    United States
Fixed Price: Less than $500   |  Posted: 5h, 5m ago  |  Ends: 14d, 18h  |   13 Proposals
I need a 3D drawing with specs to have a prototype made of a product. I have a 2D drawing, which is labeled and measured, but the company looking to mold the prototype needs more in 3D. My product is the size of a travel mug. *You will need to sign an NDA.
Category: Product Design       

l****ger
 [?]
Sign in to view client's details.
| l****ger
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-3 months  |  Posted: 6h, 7m ago  |  Ends: 25d, 17h  |   4 Proposals
Type of work: - Modify existing AutoCAD LISP routines used to draw sheet metal flat patterns in a standard 2-dimensional format. Summary: - Contractor will be dedicated to updates and modification of Gaylord VentParts Automation Programs. (LISP routines) - LISP routines developed by Gaylord are exceptionally large, intricate, and complex. - The routines are comprised of multiple layers of code and function together as complete product design and configuration software. - External processes are controlled both through the use of "lsp" files as well as visual basic. - External processes consist of interaction with Windows Explorer, "text pad" files for list storage, and calls for a multitude of "lsp" subroutines across the local network. Project Deliverables: 1. Updated LISP routine(s) as requested tested and approved by Gaylord personnel. 2. New routine(s) are to be delivered with documentation such as a part drawing and documents listing the following...
Category: CAD       
Preferred Location: United States

G****USA
 [?]
Sign in to view client's details.
| G****USA
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 8h, 45m ago  |  Ends: 14d, 15h  |   5 Proposals
We are looking to redesign one of our products and thus we are interested in receiving proposals for the following: 1. Analog and Digital Schematic Design using Altium or Orcad. 2. PCB Layout using Alitum or Allegro. 3. C programming using a Pic microcontroller. 4. FPGA development using Altera FPGAs. This will be an on going project which will last about 3-6 months. Please repsond with a proposal that outlines your experience in the areas mentioned above. If your proposal is selected you will be required to execute a NDA. Thanks Glen
Category: Electrical       

g****oya
 [?]
Sign in to view client's details.
| g****oya
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 8h, 46m ago  |  Ends: 14d, 15h  |   8 Proposals
I'm looking for an industrial designer to take a CAD model of an existing product and modify it to include a particular design feature I would like to implement. I plan on providing the modifying CAD drawing to a contract manufacturer for production. Specific details can be given upon NDA.
Category: CAD       

s****ern
 [?]
Sign in to view client's details.
| s****ern
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 9h, 31m ago  |  Ends: 1d, 14h  |   7 Proposals
Need a working prototype created based on 3d conceptual art. Parts include small plastic "flashlight" piece, stainless steel, magnet, and silicone (for now) cover. Final product will include: 1. Working prototype with size/weight limitations 2. All documents necessary for manufacturer to bring to production Looking for someone with engineering and manufacturing experience who will be able to create detailed blueprints and troubleshoot any problem areas (ex. what is the optimal size of flashlight for this project and can it be built?) and then create working physical prototype or find manufacturer who can.
Category: Product Design       

R****iba
 [?]
Sign in to view client's details.
| R****iba
|    United States
Fixed Price: Not Sure   |  Posted: 10h, 18m ago  |  Ends: 14d, 13h  |   5 Proposals
We are a company trying to design and manufacture a new style dog harness for small dogs. We have ideas that we need turned into design specs and drawings that can be used by manufacturers to produce our product. Background with pets or fashion design is helpful. We have 2 different current step in dog harnesses that exist on the market and from those design our own patented brand. We have ideas and know details about what we want the finished product to look like. I can provide all answers to any questions you may need more information on but we need to be able to deliver graphic images, patterns to size, CAD drawings or anything you feel we could deliver to manufactures (China or USA) to create our product. YOU MUST have relevant experience or any proposals will not be considered. Please feel free to ask any questions, Thanks!
Category: Product Design       

M****TGQ
 [?]
Sign in to view client's details.
| M****TGQ
|    United States
Fixed Price: Less than $500   |  Posted: 12h, 5m ago  |  Ends: 14d, 11h  |   3 Proposals
I need someone who is willing to give a fixed bid to develop tech-packs for our apparel. They must have experience within the fashion and apparel industry, and have done many tech packs. Please link to your portfolio to show your tech pack work.
Category: Product Design       

t****ign
 [?]
Sign in to view client's details.
| t****ign
|    Canada
Fixed Price: $20 - $30   |  Posted: 15h, 44m ago  |  Ends: 14d, 8h  |   6 Proposals
We looking to hire a freelancer to full time Job and long relation . We Have a small robot prototype draft in SolidWorks 5 axis Puma, We need some freelancer to help and redesign our Prototype and do some: 1-Calculation the Motor (torque) 2-Kinematic 3-Find and suggest a best and economic solutions for 5 axis robot Electric controller 4-Improve the design The best freelancer, We give a opportunity to make part of our team, and Will give a Full time job in the future, and We will give a opportunity to grow with Us
Category: CAD       

M****c78
 [?]
Sign in to view client's details.
| M****c78 *
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 18h, 27m ago  |  Ends: 14d, 5h  |   5 Proposals
i have a road improvement project i want to create corridors and cut and fill sections on every 20 m interval
Category: CAD       

s****oor
 [?]
Sign in to view client's details.
| s****oor
|    Qatar
Fixed Price: $20 - $100   |  Posted: Jul 11, 2014  |  Ends: 13d, 23h  |   7 Proposals
We looking to hire a freelancer to full time Job and long relation . We Have a small robot prototype draft in SolidWorks 5 axis Puma, We need some freelancer to help and redesign our Prototype and do some: 1-Calculation the Motor (torque) 2-Kinematic 3-Find and suggest a best and economic solutions for 5 axis robot Electric controller The best freelancer, We give a opportunity to make part of our team, and Will give a Full time job in the future, and We will give a opportunity to grow with Us
Category: Electrical       

M****c78
 [?]
Sign in to view client's details.
| M****c78 *
|    Canada
Fixed Price: Not Sure   |  Posted: Jul 11, 2014  |  Ends: 13d, 21h  |   1 Proposal
I am looking for an engineer that can help me design a new product that produces a type of adjustable audio feedback. It will be a sort of "music interrupter" for apartment dwellers to use against neighbors that indiscriminately blast their questionable taste in music at all hours of the night. The device should pick up on audio-- loud bass in particular-- and generate precisely timed sounds/vibrations that will significantly throw off the groove of the offending party. The key to this product will be the ability to use the offending audio against itself (audio judo). I want it to measure decibel levels and the rhythm of the music, and respond with timed pulses that will generate approximately the same level of noise in the neighbor's apartment, preferably during the off-beats of their music. It would also be a great feature to have the device kick on/off when the offending music gets above a certain decibel level. Ideally, this device will not be too noisy to use within y...
Category: Product Design       
Skills: Audio Engineering       

D****ius
 [?]
Sign in to view client's details.
| D****ius
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 11, 2014  |  Ends: 13d, 21h  |   25 Proposals
Plastic cap computer aided design needed for prototyping currently patent pending. I do have rough drawings and drafts but will need help in finalizing the design. Also I will need a computer aided design which will help in making the actual prototype.
Category: CAD       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       

m****uad
 [?]
Sign in to view client's details.
| m****uad
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 11, 2014  |  Ends: 13d, 21h  |   8 Proposals
Hi, I have an idea for a snack whose main ingredients are nuts and chocolate, in a unique arrangement. I need someone to help me figure out how to get it manufactured. I have an idea of how it will look, which depends on the recipe & manufacturing process of the snack. I also have a brand name that fits very well. Take for example if I wanted to create M&Ms before they existed. Who would I contact? How would the process go from start to finish to getting the product out for sale? I've thought about hiring a chef but then how would I transition to mass production? My expertise lies in ranking & selling products on Amazon.com. I know that I can make this snack a Best Seller on Amazon purely by driving major Amazon buyer traffic to it and because it will taste great (not hard to accomplish with nuts and chocolate). All input is welcome! Who can help me? Thanks! Alan
Category: Product Design       

a****ses
 [?]
Sign in to view client's details.
| a****ses
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 11, 2014  |  Ends: 13d, 18h  |   3 Proposals
Hi, We have one of these:   [obscured]  /versalase.php With three laser modules (405 nm, 492 nm and 638 nm). Circular Gaussian Beams, sizes 0.8-1 mm, Beam divergences 0.5-0.9 mrad. Inside the box you would see three small laser modules and 3 dichroics to combine the beams (co-linear output), plus 2 mirrors for XY adjustement after the 3 beams are combined. We are trying to focus down these 3 beams and create focused spots of ~10x60 um (Height X width, 1/e^2) for all of them. We are now using a set of 2 cross cylindircal lenses but the chromatic shift between the spots is killing us and we end up with three wildly different spot sizes. We are creating three interrogation spots inside a cuvette with water flowing, the application is flow cytometry. On top of that, we want to have three spatially separated spots (100 um). As of now, we are tilting the dichroics to obtain that. We would like to design a piece of optics that would serve as achromatic cross cylindrical len...
Category: CAD       

d****508
 [?]
Sign in to view client's details.
| d****508
|    United States
Fixed Price: Less than $500   |  Posted: Jul 11, 2014  |  Ends: 13d, 16h  |   26 Proposals
I'm looking for someone who can take a basic design rendering of a small gadget and make a 3d file for it, and possible get it all the way to printing. Looking for quality work, but quick turn-around time is important.
Category: CAD       
Skills: 3D Modeling, AutoCAD, 3D Printing, CAD/AutoCAD       

m****ley
 [?]
Sign in to view client's details.
| m****ley
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Jul 11, 2014  |  Ends: 5d, 14h  |   14 Proposals
Leapcraft (  [obscured]  ) is looking for a freelance electronics designer who can help with our projects to design electronics for small sensor packs and consumer appliances. The candidate should be proficient in schematic design with low energy system, experience with RF design and BTLE would be an advantage. The ideal candidate should also be able to effectively translate high level specifications as block diagrams and written descriptions into actual electronic design documents. Software type is not a criteria but being able to communicate effectively in English (verbal and written) and in dept understanding of technical aspects and terminology is must. Experience in compact, multilayer PCB design will be crucial and real word understanding of PCB production and assembly process will be good to have. Please apply with examples of schematics and PCB designs as reference.
Category: Electrical       

l****aft
 [?]
Sign in to view client's details.
| l****aft
|    Denmark
Fixed Price: $1,000 - $5,000   |  Posted: Jul 11, 2014  |  Ends: 13d, 12h  |   19 Proposals
I am looking for a microchip programmer, for writing a small program and burning it on the microchip.
Category: Electrical       

d****i72
 [?]
Sign in to view client's details.
| d****i72
|    United States
Fixed Price: $600 or less   |  Posted: Jul 11, 2014  |  Ends: 13d, 12h  |   2 Proposals
Dear, I attached the project. I need a complete project, for an electronic engineer, it's not very complicate. It's an adapter between Olinuxino-A10-Lime and Lcd screen. Fake engineer, fake freelancer, don't bit. regards, Wavemill
Category: Electrical       
Skills: Electronics, altium       

w****ill
 [?]
Sign in to view client's details.
| w****ill
|    France
Fixed Price: $20 - $80   |  Posted: Jul 11, 2014  |  Ends: 13d, 12h  |   30 Proposals
Please, follow those steps to better name our drawings 1. Copy the PDF folder tag name (ex. 101-55800-10-rev-nc) 2. Use this same name for all drawings a. For the 2D drawing include at the end of the name preceded by - (dash) 101-55800-10-rev-nc-2D b. For the 3D drawing include at the end of the name preceded by -(dash) 101-55800-10-rev-nc-3D Thank You
Category: CAD       

M****c78
 [?]
Sign in to view client's details.
| M****c78 *
|    Canada
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 11, 2014  |  Ends: 13d, 12h  |   7 Proposals
Need to Design Cabinet housing to lock in place on base and pole design. Requirements: o Sleek, Curves, o Locking method via attached latches. o Easy access to inside of cabinet. o No 90 degree angles. o Tabs that slide under base to keep in place. 1/8th inch thick tabs. o (Weight of base and pole keep in place). Total Height: 1.5 2ft Width 16" x 16" Base and pole photos:   [obscured]  /sh/zowv0xrcgqoqnfz/AABdC-6cMhLjdZarSHXYFXXca Base dimensions: 16 x 16 x Pole dimensions: 52 x 2 1/3 x 2 1/3 Please submit 3 designs." this will rest on the base/pole situation
Category: CAD       

l****e99
 [?]
Sign in to view client's details.
| l****e99
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job