Save this Search
     
Sort by:
  • Posted Date
Time Left: Less than 3 days
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 03, 2015  |  Ends: 21h, 42m  |   8 Proposals
The goal of this project will be to update a design of a PCBA for a 2500 mAh LiPo single battery power bank. PCBA specifications: Hi, we have not found a part number of the main IC. We are now choosing a provider to update this design to a new IC. We'd like the resulting design: - to reuse as much as possible from the existing design - to fully comply with this list of requirements: 1. Input: DC5V 1A, so that battery charges at 1Amp rate 2. Outputs: two independent outputs, DC5V 1A. Connection of an external device to one output automatically blocks the other output. 3. Built-in protections for input and outputs: 3.1. overvoltage 3.2. overcurrent 3.3. short circuit 4. Built-in protections for battery: 4.1. Overcharge 4.2. Overdischarge 4.3. Overcurrent 4.4. Overheating 5. Battery charging/discharging: standard 3.7V LiPo battery charging cycle, 2500 mAh battery (we will provide the samples) 6. Simple shake sensor: activates LED indication. Example:   [obscured]  /Electron...
Category: Electrical       
Preferred Location: North America, Western Europe, Eastern Europe, Eastern Asia

a****kov
 [?]
Sign in to view client's details.
| a****kov
|    United States
Fixed Price: $20 - $75   |  Posted: Jun 29, 2015  |  Ends: 1d, 9h  |   8 Proposals
I am looking for a complete design of a mobile Espresso Bar. After your design the carpenter will build the final product. WORK - PRODUCT A Mobile Espresso Bar (see attached pictures) Basis of the mobile espresso bar should be 1. a 1260x790mm kitchen island and needs to be adapted to it needs (for example an ikea stenstorp kitchen island). OR 2. Draw an own model This semifinished product has to be finished to a Mobile Espresso Bar. It should provide space for: Above Countertop :: Coffee Mashine (600x600x700mm (Width/Depth/Height)) :: Grinder :: Countertop Lid, straw and Condiment Organizers :: All kind of holes for supply (electric, water, waste etc) :: Refridgerator for cold drinks and/or take away cake/sandwiches smoothies :: a space where a customer can prepare his coffee, example to finish with sugar, stir and put a top on the cup. :: A space where the customer can drink the coffee. Can be made with one of the sideparts (see closing) :: any input or ideas will be great Belo...
Category: CAD       
Skills: 3D, 3D Modeling, AutoCAD, Manufacturing Design       

w****nfo
 [?]
Sign in to view client's details.
| w****nfo
|    Austria
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 28, 2015  |  Ends: 14h, 27m  |   56 Proposals
I need someone to take my "technical" drawings, specifications, and ideas and turn them into CAD drawings that I can submit for prototyping and manufacturing. I've provided 85% of what is needed, I just lack the skill to get that last 15% done. There will be some assistance needed from you to determine fabrication material and tolerances. Currently, I have 8 drawings showing every component of the device and can work daily with you on any questions or specifics you need from me to complete the project. I would prefer someone to provide an hourly rate bid then we can discuss how many hours you will need to complete once you have had a chance to review the drawings and the scope of the project. I'm mechanically inclined, and have taken some engineering courses so I'll be able to partner with you until we get it right. If all goes well, future work can be awarded to you on a project by project basis. While timelines are fluctuating, I'd like to get the project started b...
Category: CAD       
Skills: AutoCAD, Manufacturing Design       

K****nis
 [?]
Sign in to view client's details.
| K****nis
|    United States
Fixed Price: Less than $500   |  Posted: Jun 28, 2015  |  Ends: 7h, 58m  |   11 Proposals
I would like for someone to design an apparatus that would attach to a squat rack with a J-hook attachment and remain very stable once in place. Essentially the device will be built off of a J -hook. see photo of the J hook attached. The apparatus should have two pads 24 inches long with a diameter of 6 inches, that would support the legs of the person doing the handstand to help them regain balance without needing to return their feet the ground, each time balance is lost. The key feature of the apparatus would be a mechanism that would allow one of the pads to be positioned directly above the other (in the start position) and rotate safely(smoothly with no loud noises) around the feet of the person doing the handstand once they "kick up" into position. This rotational movement of the top pad would be activated by the pressure of the (heels of calfs)hitting the primary support pad. Once this rotation has a occurred, the apparatus would provide support on both sides. Ide...
Category: Product Design       
Skills: Manufacturing Design, Product Design       
Preferred Location: North America

k****ken
 [?]
Sign in to view client's details.
| k****ken
|    Canada
Fixed Price: Less than $500   |  Posted: Jun 23, 2015  |  Ends: 2d, 20h  |   27 Proposals
An immediate contract need has arisen within our online team. Our growing practice is a multi-disciplined organisation with a current focus on the residential design sector. A contract role currently exists for an architectural drafter and documenter who has a full working knowledge of Revit and AutoCAD. Our company has a solid pipeline of work and an excellent standing in the market, so this is a great chance to join on a well-paid contract basis. To be successful for this position you will need to be available to undertake a paid online audition project. The audition project will closely emulate our current work flow and will test both your ability to produce the require documentation in a timely manner, work independently and to communicate effectively online (in English). While the following skills and experience would be advantageous, they are not prerequisites: ? Tertiary qualification in Architecture or Architectural Technology ? 4+ years Revit and AutoCAD expertise ? 4+ year...
Category: CAD       

l****ale
 [?]
Sign in to view client's details.
| l****ale
|    Australia
Fixed Price: Not Sure   |  Posted: Jun 23, 2015  |  Ends: 2d, 20h  |   5 Proposals
Goal: Collect accurate Apple watch gyroscope, accelerometer, and magnetometer data into exportable csv/excel Functionality: iOS App - receive gyroscope, accelerometer, and magnetometer readings off of Apple Watch - export and email csv/excel Watch App - Start record/stop record ability (preferably on watch) - record above mentioned readings and send to phone
Category: Product Design       
Skills: iOS Development       

z****ima
 [?]
Sign in to view client's details.
| z****ima
|    United States
Hourly Rate: $25 - $50 / hr   |  Duration: 7-9 months  |  Posted: Jun 22, 2015  |  Ends: 2d, 18h  |   28 Proposals
Replace power connector with alternate (symbol/footprint) adjust the connector locations to protrude from case design compatible faceplate for case option for additional ongoing support with future changes.
Category: Electrical       
Preferred Location: United States

b****ric
 [?]
Sign in to view client's details.
| b****ric
|    United States
Fixed Price: Less than $500   |  Posted: Jun 22, 2015  |  Ends: 2d, 15h  |   41 Proposals
I own a bicycle company and I'm designing a new bicycle. I only have a PDF file that is based on an illustrator design I did. I do have frame dimensions but I don't have dimensions of all of the aspects of the bike but I'm looking to produce a 3D version in AutoCAD to present a client. I'm looking for something like my friend created, you can see here,   [obscured]  -industries.com/blogs/news/17178644-creating-with-cozy-part-2-the-cad I believe he used   [obscured]  /products/fusion-360/overview Attached is the drawing as done in Illustrator and attached is the frame measurements.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

d****ger
 [?]
Sign in to view client's details.
| d****ger
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 22, 2015  |  Ends: 2d, 13h  |   16 Proposals
Help us design a competitive robot. We are a young team that needs help with documentation. Thank you...
Category: Product Design       

K****nik
 [?]
Sign in to view client's details.
| K****nik
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 22, 2015  |  Ends: 2d, 12h  |   7 Proposals
Looking to design a very compact controller / circuit design for an RGB LED array (60 x 12 - each led individually addressable). LED array will function as a portable display screen. Controller should allow connection / signal feed via WIFI and be daisy-chainable to extend display screen across multiple array segments.
Category: Electrical       

W****ooj
 [?]
Sign in to view client's details.
| W****ooj
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: Jun 22, 2015  |  Ends: 2d, 12h  |   4 Proposals
i am looking for someone who can create a well done product for me that will look good and work well. I am looking for someone who can make a sensor that when walked by activates a sound. I want the sound to be activated when a small device passes through. small enough to keep in a back pocket.
Category: Electrical       

j****uca
 [?]
Sign in to view client's details.
| j****uca
|    Canada
Fixed Price: Less than $500   |  Posted: Jun 22, 2015  |  Ends: 2d, 10h  |   24 Proposals
I need a circuit that can be mass produced cheaply. I want to run some 12V 4.8W equipment on a timer. It will run for a 5 min interval and then shut off for one of three user defined intervals. There should be buttons so the user can select different intervals. There should be small LED lights that indicate which interval has been selected. There must be a light sensor that, if selected will cause the equipment not to run at night. There should be an LED that indicates whether this light sensor has been selected to operate. Input: 120 V ac Output: 12 V dc Button one: Selects 60 min "off" interval Button two: Selects 120 min "off" interval Button three: Selects 180 min "off" interval Button four: Selects a light sensor which can cause the whole thing to stop operating at night.
Category: Electrical       
Skills: Integrated Circuits, Circuit Design       

P****eer
 [?]
Sign in to view client's details.
| P****eer
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 22, 2015  |  Ends: 2d, 2h  |   5 Proposals
We have mobile devices which we would like to re-purpose into monitoring equipment. Essentially we need to take a specific model of mobile phone and give it power (removing the need for a battery) and feed the device internet access through a cat5 network cable. We'd can supply a device and would like a prototype built. If successful we have hundreds of devices that would need to be re-purposed. Open to negotiation for the rate.
Category: Electrical       

b****tje
 [?]
Sign in to view client's details.
| b****tje
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Jun 22, 2015  |  Ends: 2d, 1h  |   17 Proposals
I need a plastic case for a new guitar accessory. It will be done from an external case and from an internal mechanism to fix it on the neck of a guitar. I need a Cad draw and a goodfixing system. Luciano
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

F****nst
 [?]
Sign in to view client's details.
| F****nst
|    Italy
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: Jun 22, 2015  |  Ends: 2d, 0h  |   22 Proposals
Complete Electrical CAD plans Lighting and Power System Layout Load Schedule & Computation Single Line & schematic Diagram General Notes and Legends Required Details Also Accept : Fire Detection and Alarm System plan Voice & Data / Structured Cabling plan
Category: CAD       
Skills: 3D Modeling, AutoCAD, AutoCAD 2012       

F****kie
 [?]
Sign in to view client's details.
| F****kie
|    Qatar
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 22, 2015  |  Ends: 1d, 23h  |   12 Proposals
From: Fahad Date: 6/6/2015 11:11:55 AM Hi there I haven't got all the details till now, but here few things which I know -Chose a circuit and design on Altium design 09. -PCP project -schematic -creating a new components and add to the new library. -solidwork. -3D It's all about the design of our circuit. Deadline will be on 17th of June . About the cost will not have a problem. If you have any questions feel free to ask . Thanks
Category: Electrical       

K****000
 [?]
Sign in to view client's details.
| K****000
|    New Zealand
Fixed Price: Less than $500   |  Posted: Jun 22, 2015  |  Ends: 1d, 23h  |   32 Proposals
I am looking for a professional who can model very well in CAD and create beautiful renderings. If you are capable of completing my task, I will have MUCH more jobs available. I run a product design & contract manufacturing business in Guangzhou, China. I am constantly in need of new talent and am fine to pay good rates as long as you work hard, create high quality work, and finish within the timelines that we agree on. For this project, I need an engineer to create some 3-D renderings of a watch based on my instructions. The instructions will be quite detailed, but I require an engineer/designer who is capable of using his/her own creativity to finish the job with a nice touch! Please only apply if you have reference work attached to your application. I would like to pay a FIXED rate to start. Once you have proven to me that you work well and diligently through your work hours, I am willing to move over to hourly rate if you wish. Thanks and talk soon,
Category: Product Design       

s****974
 [?]
Sign in to view client's details.
| s****974
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 22, 2015  |  Ends: 1d, 22h  |   11 Proposals
We are working a stm32 based controller board.It would have the following features 1. 2 DC-DC converter 100W each 2. 2 DC-DC Converter 10W each 3. 144Pin QFP microcontroller 4. Analog sensor Interface 5.I2C/SPI/FSMC Interface I am attaching a incomplete schematics with this job requirement.We expect this to be a maximum 6 layer board.We expect to be on a kicad. Any other layout package is also fine. We expect a limited support for a some time. Thanks Prabhu.G
Category: Electrical       

p****jan
 [?]
Sign in to view client's details.
| p****jan
|    India
Fixed Price: $20 - $30   |  Posted: Jun 21, 2015  |  Ends: 1d, 13h  |   34 Proposals
I need technical drawing produced from image and description as below:   [obscured]  /product-detail/21-gas-station-pump-top-digital_422685811.html This will only be used for illustrative purposes so does not require a great deal of technical accuracy!
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

j****e01
 [?]
Sign in to view client's details.
| j****e01
|    United States
Hourly Rate: $10 - $20 / hr   |  Duration: Not Sure  |  Posted: Jun 21, 2015  |  Ends: 1d, 11h  |   9 Proposals
Hello all, we are looking to design and build a circuit board for a pair of headphones using Bluetooth to transport files from mobile recordings to headset which can be then saved to an SD card connected to the headset. for more details please apply for jobs. must be fluid in English and must be able to trouble shoot and identify and solve problems. also must be able to communicate for an interview.
Category: Electrical       

M****ech
 [?]
Sign in to view client's details.
| M****ech
|    United States
Fixed Price: Less than $500   |  Posted: Jun 21, 2015  |  Ends: 1d, 9h  |   10 Proposals
I need you to design the schematics/programming of a microcontroller based magnetic card reader. The device must store to an onboard flash chip and be interfaced by USB. It must be ultra low power and not have a standby mode. Further information available
Category: Electrical       

c****593
 [?]
Sign in to view client's details.
| c****593
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 21, 2015  |  Ends: 1d, 7h  |   44 Proposals
Hello, Can you please tell me what your hourly rate would be for Auto Cad drawings for Oil & Gas Analyzers & Building components? We would provide a few templates as well as a hand sketch. We would also require a standard non-disclosure to be signed, as some of the projects details are confidential.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

s****iak
 [?]
Sign in to view client's details.
| s****iak
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 21, 2015  |  Ends: 1d, 7h  |   20 Proposals
Hello, Can you please tell me what your hourly rate would be for Auto Cad drawings for Oil & Gas Analyzers & Building components? We would provide a few templates as well as a hand sketch. We would also require a standard non-disclosure to be signed, as some of the projects details are confidential.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

s****iak
 [?]
Sign in to view client's details.
| s****iak
|    Canada
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Jun 21, 2015  |  Ends: 1d, 5h  |   46 Proposals
Looking for a talented designer to layout plans for a salon and real estate office. Total space is 6,543 sq. ft. Approximately 2000 sq ft for the real estate office and the rest for the salon. Current floor plan to be provided. Salon will have 11 (or more) private rooms approximately 100 sq. ft. Each. Also will have break room, reception area, main salon floor, and retail space. Real estate office to have 4 or 5 private offices, reception area, break room, conference room, and 10 cubicles.
Category: CAD       
Skills: 3D Modeling, ArchiCAD, Architecture, AutoCAD       

F****ONP
 [?]
Sign in to view client's details.
| F****ONP
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 21, 2015  |  Ends: 1d, 4h  |   5 Proposals
Hi, looking to make a solar charger that would work for lightning cable iOS devices, the latest iPad being the largest device. Basically looking for a solar panel, that can draw enough power to charge an iPad when connected through USB. This will end up embeded in an end product, but if you can give me the basic specs, I can figure out how to fit it into the end product. Need some insight to solar cells, and technical requirements to sell such a device. I'll deal with apple and getting anything certified that I need to. As far as compensation goes, you tell me what you want and we'll go from there.
Category: Product Design       

E****ers
 [?]
Sign in to view client's details.
| E****ers
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job