Save this Search
     
Sort by:
  • Posted Date
Posted: Within 7 days
Fixed Price: Less than $500   |  Posted: 2h, 34m ago  |  Ends: 14d, 21h  |   3 Proposals
I would like a design for a custom pendant for a braclet similar to the example (see attached). The example bracelet is specific to sport fishing and people that like to fish. I would like to design a new bracelet that is for people that love beach living and the beach lifestyles. Here is my logo and website (for inspiration).   [obscured]  / It would also be great if there where a way for me to brand each bracelet to a specific beach. For example on the example where it says "Chasing Fin". I would like to put "Cocoa Beach".
Category: Product Design       

C****ing
 [?]
Sign in to view client's details.
| C****ing
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 2h, 39m ago  |  Ends: 14d, 21h  |   1 Proposal
Necesitamos ingenieros electronicos de Peru para diseñar mainboards para un proposito especifico , que tengan mucha práctica/conocimiento en construir/reparar/modificar placas madre.
Category: Electrical       

k****ton
 [?]
Sign in to view client's details.
| k****ton *
|    Peru
Fixed Price: Not Sure   |  Posted: 3h, 36m ago  |  Ends: 14d, 20h  |   4 Proposals
This is a PCB design job. The PCB is a PCIe card. I'm going to use the XR17V354 (PCIe-UART bridge) for PCIe interface. And the UART will be connected to microZED module. Simply say, This is for giving PCIe interface to microZED through UART interface. I want 2 UART connection to be connected between PCIe and microZED. I can't give you more information of XR17V354 because I couldn't find a reference schematic of it. And I want you to have some knowledge about the Zynq which is the SoC on the microZED because you need to understand it how to make the UART connection. I want you to use PADS for both schematic and layout design.
Category: Electrical       

W****m88
 [?]
Sign in to view client's details.
| W****m88
|    Korea, Republic of
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 3h, 48m ago  |  Ends: 14d, 20h  |   5 Proposals
I am looking for an electrical engineer to design an electrical control box for an oven. I will need detailed specifications that I can use for taking in offers for parts and/or a fully assembled control box. Delivery is a list of components and schematics for wiring. We will only be making a few of this machine at this time, so I think it would be better to use PLC:s rather than PCB:s. The box will control one motor and two heating element arrays. The motor will need adjustable speed and soft start. The motor will also work and pause in intervals. The element arrays will be controlled individually and by a common thermostat. The elements will also be controlled with a timer. The machine will need an emergency kill-switch that turns everything(motor&elements) off Attached is a schematic representation of our system and our needs
Category: Electrical       

a****zzz
 [?]
Sign in to view client's details.
| a****zzz
|    Sweden
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: 4h, 47m ago  |  Ends: 14d, 19h  |   25 Proposals
Design 2D drawings of different existing assemblies according company CAD guideline which describe rules, functions and layouts of 3D and 2D design with Solid Works and Solid Works Inspection. Tasks in this job are: - Set properties to assemblies - Create 2D drawings according company template - Add dimensions for Incoming inspection according existing 2D drawing examples Required preparation for this job are: - Read company CAD guideline - Set all the Solid Works settings to create drawings
Category: CAD       
Skills: 3D, SolidWorks, 2D Design, Solid Works Inspection       

c****kue
 [?]
Sign in to view client's details.
| c****kue
|    Switzerland
Fixed Price: Less than $500   |  Posted: 12h, 35m ago  |  Ends: 14d, 11h  |   41 Proposals
We're an acoustic treatment company looking for an engineer to develop a new 3D product design within CAD - or a CAD-like program. Seeking dimensional drawing to depict top, front, and side views, as well as a dimensional-less 3D rendering. We will provide a sketch / physical attributes of the product in development.
Category: CAD       
Skills: AutoCAD, SolidWorks, .NET Framework, 3D Rendering       

O****ics
 [?]
Sign in to view client's details.
| O****ics
|    United States
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: 16h, 50m ago  |  Ends: 14d, 7h  |   7 Proposals
This job focuses on achieving the best design for the product I have in mind. In this case the final design of the product is strongly related to the orientation and design of the chosen electrical components. I need consultation and direction on the electrical design and after that I need to narrow down the best design. I have some concepts in mind, but I need professional input. Only after the final design is reached, I will need a 3D rendering of the product. Details will be disclosed upon signing an NDA.
Category: Product Design       

J****101
 [?]
Sign in to view client's details.
| J****101
|    United States
Fixed Price: $50 or less   |  Posted: 17h, 36m ago  |  Ends: 14d, 6h  |   5 Proposals
looking to have a CAD file made for a display cabinet. I have all of the sizes, reference pictures etc. will be a very basic job. must be a fixed price. would also need pdf files of the CAD design. will be made from 19mm MDF or chipboard, will be hung on a wall as display. the door must have rebate routed for the glass insert. adjustable holes down sides for glass shelf adjustment hinged front display door. door is slightly bigger than cabinet to hide the carcass. see pics. 900mm wide 1200mm high 100mm deep would like to be exactly same design as the pictures attached
Category: Product Design       

b****mer
 [?]
Sign in to view client's details.
| b****mer
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 21h, 8m ago  |  Ends: 1d, 2h  |   8 Proposals
Need someone to create a resubdivision plat based on old subdivision plat and deed. Basically looking to combine to adjacent lots. Thanks
Category: CAD       
Skills: 3D Modeling, AutoCAD       
Preferred Location: United States

e****726
 [?]
Sign in to view client's details.
| e****726
|    United States
Fixed Price: Less than $500   |  Posted: 22h, 55m ago  |  Ends: 14d, 1h  |   4 Proposals
We're are looking at building a dodecahedron speaker with integrated amplifier and noise source. The 12 identical speakers have an impedance of 8ohms each and maximum input power of 100W RMS but 20-30W per driver should suffice to achieve an overal SPL > 100dB @1m as the driver sensitivity is stated as 85dB/1W. An integrated pink or white noise source is a bonus. Space is of the essence as we want to integrate the amplifier within the dodecahedron if possible. The brief is to design and build the first and hopefully final version of this amplifier (we will build the dodec and source the required speakers).
Category: Electrical       

f****959
 [?]
Sign in to view client's details.
| f****959
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 23h, 15m ago  |  Ends: 14d, 0h  |   28 Proposals
Need 3 detailed drawings either 2D or 3D with measurements. One drawing is a ring second drawing would be a 4 point star and third drawing is a flat ring with 3 legs (almost like a table). I have drawn on paper design with all measurements. I will provide picture of drawings for reference.
Category: Product Design       

j****trc
 [?]
Sign in to view client's details.
| j****trc
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 23h, 38m ago  |  Ends: 14d, 0h  |   14 Proposals
Fido is a Belgian startup looking for a talented electronic schematic designer and PCB designer that is open to help a team design the ultimate dog wearable, to be launched this year. The PCB design should take into account multiple sensors (e.g. accelerometer, gyroscope, etc.), wireless charging and radio chipsets (e.g. BTLE, Wi-Fi, etc.). The ambition is to provide the maximum of information on an as small as possible footprint. Therefore, the PCB designer should have a firm grasp on building small and compact PCB designs. The tasks will be to: 1) Review high-level product requirements and provide feedback on feasibility to the team; 2) Support in the development of the first electronic schema's; 3) Produce and iterate on PCB designs. The ideal candidate has a startup mentality and can work under tight deadlines and often with open and changing requirements. Your own interpretation and feedback is therefore matters and will greatly impact the product design and product materia...
Category: Electrical       

f****ens
 [?]
Sign in to view client's details.
| f****ens
|    Belgium
Fixed Price: $1,000 - $5,000   |  Posted: Mar 29, 2015  |  Ends: 13d, 17h  |   20 Proposals
Hello, We are looking for a professional electronic developer, who could help us design a PCB that would have a camera module ( based on the OV13850 sensor ), with an ARM processor or an FPGA that would save the feed from the camera to a micro SD card, as well as transmit a low-res version over WiFi.
Category: Electrical       

C****mes
 [?]
Sign in to view client's details.
| C****mes
|    Latvia
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: Mar 29, 2015  |  Ends: 13d, 16h  |   10 Proposals
Modernus (  [obscured]  ) is an architectural product company, specializing in the design and installation of office glass partitions in the US and abroad. We are a dynamic and young company based in San Francisco, with offices in New York. We work with most of the major architectural companies nationwide and develop our own product lines in house. We are looking for a technical designer with some experience in the architectural product market, preferably in the wall partition market segment. You must be able to read and understand blue prints and generate shop drawings, familiar with aluminum profile construction and glass assemblies - door product experience would be a plus. You must have experience working in and surveying (measuring) job sites. You will need to interact with installation crews in the field on technical matters. You will have to problem solve, update the project manager and comunicate with the purchasing manager and/or vendor if need it. You must posses clear...
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

m****nus
 [?]
Sign in to view client's details.
| m****nus
|    United States
Fixed Price: Not Sure   |  Posted: Mar 29, 2015  |  Ends: 13d, 13h  |   4 Proposals
I have a fixed clock 32 bit Booth multiplier, which has to be converted to Variable clock Booth Multiplier. Right now it takes 32 clock cycles to output a result. When it is converted to a variable clock multiplier it should take variable number of clock cycles depending upon the type of the input.
Category: Electrical       
Skills: Verilog / VHDL       

f****x00
 [?]
Sign in to view client's details.
| f****x00
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 29, 2015  |  Ends: 13d, 12h  |   2 Proposals
Innovative design that our startup is focusing on. Looking for a striving individual to help grass root the prototype and possibly join our team going forward. NDA and in-person meeting required in San Francisco.
Category: Product Design       

v****ler
 [?]
Sign in to view client's details.
| v****ler
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 29, 2015  |  Ends: 13d, 11h  |   3 Proposals
Are you a creative engineer? Can you take an idea and turn it into reality? Maybe build something fun? Am looking for someone who has a background in computer hardware engineering, someone whom can take an idea and figure out if an idea can work. You would also need skills (or know someone who does) in APP writing for iPhones and or Android based mobile phones. First part is to figure out if the project is possible to build. Second part is to build it. Think this is you? It's for a toy.
Category: Product Design       
Preferred Location: United Arab Emirates

L****_76
 [?]
Sign in to view client's details.
| L****_76
|    United Arab Emirates
Fixed Price: Not Sure   |  Posted: Mar 28, 2015  |  Ends: 13d, 9h  |   7 Proposals
We are LED fittings manufacturer, our key products are; >> Industrial High Bay ................. (Indoor Usage) >> Petrol Station Canopy Light ... (Indoor Usage) >> Flood Light ............................. (Outdoor Usage) >> Street Light ............................ (Outdoor Usage) >> Explosion Proof ..................... (Outdoor Usage) I'm looking for DaiLux Simulation and Lighting Design Services.
Category: Product Design       
Skills: Industrial Design, DaiLux, Lighting Design       

w****ttc
 [?]
Sign in to view client's details.
| w****ttc
|    Malaysia
Fixed Price: $250 - $25,000   |  Posted: Mar 28, 2015  |  Ends: 13d, 5h  |   50 Proposals
We are a fast growing company that is looking to establish a working relationship with someone who we can source our design work to. We do the concepts and the design and send you what we want. It is your job to take the notes, sketches, initial Revit layout and finish out all of the changes and details.
Category: CAD       
Skills: 3D Modeling, AutoCAD, AutoDesk Revit, CAD/AutoCAD       

M****use
 [?]
Sign in to view client's details.
| M****use
Fixed Price: Less than $500   |  Posted: Mar 28, 2015  |  Ends: 13d, 1h  |   18 Proposals
I need someone helping me finishing a concept for a small product (in the area of Bottles and Beverages). The concept still lacks on the mechanical aspects and it needs to be completed, that means a document and drawings have to be made in order to be ready to apply for a patent. Signing of a NDA is required. Its only the first step for more jobs. Overview: - First signing of NDA required - Development/Continuing of a concept especially the mechanical aspects - CAD and Document for patent application So i hope to find a good partner for more than just this job.
Category: CAD       

m****asi
 [?]
Sign in to view client's details.
| m****asi
|    Germany
Fixed Price: Less than $500   |  Posted: Mar 28, 2015  |  Ends: 13d, 1h  |   10 Proposals
Hi I require some concept drawing idea for a planning hull trailer able house boat. I want to be able to easily live in it if it is on to water or at a campsite. I had some plans but they are a little to 1960's and the other plans I have are a little to modern so a look somewhere in the middle. requirements - no wider that 2.4m no longer that 7m - room for lots solar panels - planning hull with 90hp on back - aerodynamic for towing on trailer - room for 3.3m dinghy and 15hp outboard on roof (for transit) and docking tie up at rear (when in water) - covered deck area Keywords boat marine design 3d navel naval ship
Category: Product Design       

a****iwi
 [?]
Sign in to view client's details.
| a****iwi
|    New Zealand
Fixed Price: Not Sure   |  Posted: Mar 28, 2015  |  Ends: 12d, 23h  |   28 Proposals
Build an attractive and easy to manufacture electronics enclosure to be used in a next generation wi-fi connected IoT device. Approximate dimensions of the enclosure is 180 mm x 180 mm x 70mm. The enclosure will be wall mounted with an attractive snap cover. The base houses a PCB and Terminal Block(s). The cover should house status LEDs. There may be an ON/OFF switch as well (TBD) Attractive design and easy manufacturability is a must.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, 3D Design       

p****ara
 [?]
Sign in to view client's details.
| p****ara
|    United States
Fixed Price: Not Sure   |  Posted: Mar 28, 2015  |  Ends: 12d, 21h  |   11 Proposals
Hi I'm a high school IT teacher looking to make my classes more interesting using electronics, something I've never learned myself. I'm looking for someone who can help me create 12 video tutorials for my classes - what the projects are, you can help me decide. The main thing is to get students hooked on the projects. e.g. connecting arduino with twitter. Currently we have a basic arduino kit to work with, willing to purchase more bits and pieces if necessary. Also have a 3D printer. Timeline is flexible, to start in the next 3 weeks and to finish within 4 weeks. If interested, please let me know your cost and a couple of your ideas. Thank you
Category: Electrical       
Skills: Arduino       

f****eak
 [?]
Sign in to view client's details.
| f****eak *
|    Australia
Fixed Price: Less than $500   |  Posted: Mar 28, 2015  |  Ends: 12d, 19h  |   17 Proposals
I plan to manufacture photo booths and would like some fabrication drawings done so I can have people quote on the construction of the booths. I have pictures of booths we would like to model and dimensions of structure etc
Category: Product Design       

G****ell
 [?]
Sign in to view client's details.
| G****ell
|    Singapore
Fixed Price: Not Sure   |  Posted: Mar 28, 2015  |  Ends: 12d, 13h  |   13 Proposals
I have a patent on a CEILING FAN product I created some years ago. I want to create a sleek, more refined prototype proving the concept. This is the Abstract of the Patent: A fan blade assembly having both an electrical connection and a mechanical connection to a rotating hub. The assembly is configured so that a single installation motion creates the mechanical connection and the electrical connection. The electrical connection preferably includes multiple independent conductor paths. You can find a link to the patent here:   [obscured]  /patents/US20110085908 The project is for the design/prototyping of a fully working ceiling fan with detachable electrical/mechanical blades with LED embedded.
Category: Product Design       

P****lly
 [?]
Sign in to view client's details.
| P****lly
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job