Save this Search
     
Sort by:
  • Posted Date
Payment Verified
Hourly Rate: Not Sure   |  Duration: 4-6 months  |  Posted: 3h, 45m ago  |  Ends: 14d, 20h  |   8 Proposals
Job Description: We are looking for a versatile and experienced engineer and designer of electronics. From prototypes to full production, to work with a small team to help us create the hardware part of our products. This individual must be well organized, technically proficient, independent, creative, and accommodating. Skills required: - Must be able to efficiently produce accurate engineering documentation - Excellence in soldering, mechanical assembly, and rework for design prototypes. - Professional courtesy and communications, especially in dealing with customers. - Experience with video/audio streaming, WebRTC, wireless connection, Bluetooth, motion detection is a plus. - Experience with OpenCV will make you our hero. We are looking for a long-term relationship starting with this project. We are also expecting a first-class hardware developers.
Category: Electrical       

a****tan
 [?]
Sign in to view client's details.
| a****tan
|    United Kingdom
Fixed Price: Not Sure   |  Posted: 7h, 23m ago  |  Ends: 14d, 16h  |   5 Proposals
The objective is to design and fabricate one or several circuit board(s) capable of collecting multiple vital signs (ECG, SpO2, Temperature). The design can be a new design or one that is based on an existing reference design if the requirements can be met. If a reference design is used, schematics and demo software/firmware will be provided by the freelancer. The requirements are: - Capable of measuring ECG, pulse oximeter (SpO2), and temperature - Use an embedded 32-bit microprocessor with DSP functionality - Data collection of ECG and SpO2 must be simultaneous or with a low, deterministic latency (<1ms) between ECG/SpO2 samples - Sampling of ECG/SpO2 should occur at a rate higher than 100Hz with a good signal-to-noise ratio - Communication over USB/RS232 to a PC host - Onboard storage for at least 10 seconds of ECG/SpO2 data - Powered by a +5V DC power supply. Preferably a USB port. - A touch or infrared sensor for temperature - Firmware/software program demonstrating the fu...
Category: Electrical       

m****sia
 [?]
Sign in to view client's details.
| m****sia
|    United States
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: 9h, 25m ago  |  Ends: 14d, 14h  |   12 Proposals
Embedded hardware engineering support needed to assist with design iteration. Work includes schematic, layout and hardware bring-up.
Category: Product Design       

s****obs
 [?]
Sign in to view client's details.
| s****obs
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: 13h, 45m ago  |  Ends: 14d, 10h  |   16 Proposals
Need an experienced AutoCad Designer that can create CAD files to be output on a 3D printer. Will work with existing CAD file of item that will be packaged. Will need CAD file and engineered drawing.
Category: CAD       
Skills: AutoCAD, AutoCAD 2012, 3D Printing       

G****g62
 [?]
Sign in to view client's details.
| G****g62
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 18h, 4m ago  |  Ends: 14d, 5h  |   18 Proposals
Hi, I have at a fair a device that is able to talk to centralised Heat&AC systems (like the ones that you find in hotels) and to control remotely temperature etc.. The device is marketed as a power saver due to the fact that uses ultrasonic sensors to detect the presence of people in the room and shuts down heat/AC or reduces it based on the setting chosen. The device is powered and uses power line network and a proprietary protocol to record power saving (the delta between the power reduced since the absence and what it would have used in power if the device was never in place). I would like to produce this device, right now this little device (15cmx10cm) can not be bough, so I would like to create one to propose to hotels etc... Would you be able to help? How would that work? I am a software person and never tried HW/Electronics before, so I am sorry if this might sound a bit foolish, but I can assure the project is serious and I have intention to find the right partner ...
Category: Electrical       

G****Dub
 [?]
Sign in to view client's details.
| G****Dub
|    United Kingdom
Fixed Price: Not Sure   |  Posted: 18h, 14m ago  |  Ends: 14d, 5h  |   12 Proposals
I'll need to measure temerature from 12 points through non-contact temperature sensors. Once the temperature is readed, the data has to be saved in a memmory card. Ideally, the sensors will be reading and saving temperature, at least, every 0.5seconds. The idea is that later I can plot temperature vs time. The freelancer will have to prepare a tutorial on how to do this and must cover all the aspects so that someone with little knowledge can buy its own sensors and do it. That includes the code. I hope to hear from you soon. Cheers P.S: I was thinking about this sensors:   [obscured]  /products/9570
Category: Electrical       

p****785
 [?]
Sign in to view client's details.
| p****785
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 21h, 6m ago  |  Ends: 6d, 2h  |   11 Proposals
The job involves converting two gerber files (to be provided) into the respective CAD files so that these PCB CAD files that can be edited. The gerber files were given for a reference layout of a electronic component application; unfortunately the existing layouts are not optimised for heat dissipation and the OEM will not supply the CAD files. Gerber File #1: Two layer boards (top and bottom); two traces only Gerber File #2: Four layers boards (top RF signal, RF signal ground, DC signal, DC signal ground); three RF traces; some DC traces. Deliverables of this project: 1. CAD files for the two PCB designs; 2. Check and verification of the gerber vs CAD output Please let me know if you are interested.
Category: CAD       
Skills: Altium Designer, Electronic Design       

J****510
 [?]
Sign in to view client's details.
| J****510
|    Hong Kong SAR, PRC
Fixed Price: Less than $500   |  Posted: Sep 03, 2015  |  Ends: 13d, 23h  |   10 Proposals
i need Freelancer with good Skille in embedded Systems, java small and Academic Writing too. Please contact me for more details. Regards
Category: Electrical       
Skills: Electrical Engineering, Java, Electronics       

d****000
 [?]
Sign in to view client's details.
| d****000
|    Germany
Fixed Price: Not Sure   |  Posted: Sep 03, 2015  |  Ends: 13d, 23h  |   15 Proposals
Hello, We are looking for an experienced electronic engineer, who could develop a PCB ( schematics, routing and at least basic firmware ) for a camera, that would be using the OV13850 image sensor, save images/video to a micro SD card and/or transfer them via wifi. you are free to select a microprocessor or FPGA that you are most familiar with, as long as it is available, would be able to handle 13.5MP images/video and costs user 25$ or so. other requirements during future communication.
Category: Electrical       

C****mes
 [?]
Sign in to view client's details.
| C****mes
|    Latvia
Hourly Rate: Less than $10 / hr   |  Duration: 3-4 weeks  |  Posted: Sep 03, 2015  |  Ends: 13d, 20h  |   18 Proposals
I am looking to have a range of designs, and then plans drawn for screens/shelters to improve the aesthetics of garbage bin storage areas. The screens will be for a range of bin sizes and be suitable for residential or commercial garbage bin locations. The designs & plans will be as such that they can be taken to a local Australian aluminium or steel manufacture to build with generic parts, (prefer no custom moulds or components that require new extrusions or similar). Once the screen designs and plans are in place I would like to have 3D models of them generated in a range of different finishes (visual only). These 3D models will then become part of a virtual showroom to be utilised in an app that allows people to photograph their bins, and then select the look and finish of the bin screens from within the app. To summaries, 1, Design bin screens. 2, Draw plans for each in the range. 3, Create 3D modelling for each of the range in a couple of different colours/materials. ...
Category: CAD       

B****ens
 [?]
Sign in to view client's details.
| B****ens
|    Australia
Fixed Price: $100 - $200   |  Posted: Sep 03, 2015  |  Ends: 13d, 18h  |   7 Proposals
The objective is to design and fabricate one or several circuit board(s) capable of collecting multiple vital signs (ECG, SpO2, Temperature). The design can be a new design or one that is based on an existing reference design if the requirements can be met. If a reference design is used, schematics and demo software/firmware will be provided by the freelancer. The requirements are: - Capable of measuring ECG, pulse oximeter (SpO2), and temperature - Use an embedded 32-bit microprocessor with DSP functionality - Data collection of ECG and SpO2 must be simultaneous or with a low, deterministic latency (<1ms) between ECG/SpO2 samples - Sampling of ECG/SpO2 should occur at a rate higher than 100Hz with a good signal-to-noise ratio - Communication over USB/RS232 to a PC host - Onboard storage for at least 10 seconds of ECG/SpO2 data - Powered by a +5V DC power supply. Preferably a USB port. - A touch or infrared sensor for temperature - Firmware/software program demonstrating the ...
Category: Electrical       

m****sia
 [?]
Sign in to view client's details.
| m****sia
|    United States
Fixed Price: Not Sure   |  Posted: Sep 02, 2015  |  Ends: 13d, 14h  |   5 Proposals
I need a complete camera case design that meets standard carry-on requirements of all airlines. General specs for carry on are 22x14x9 inches and 15#. This bag needs to safely and securely house a dji phantom 3 (including controller, charger and 2 batteries), a canon rebel t3i with a 17-40 mm lens, an 8-15 mm lens, a gopro camera and some accessories such as cables, gorillapod, feiyu wearable gimbal and battery charger. Drones are usually housed in dense foam and camera gear is usually housed in padded compartments but I cannot find a design that will house both with required specs. Example of drone storage:   [obscured]  /HPRC-HPRC2700WPHA3FO-Custom-Phantom-Black/dp/B00ZL3F2UY/ref=sr_1_1?ie=UTF8&qid=1441242471&sr=8-1&keywords=phantom+3+foam&pebp=1441242470657&perid=1HW0BBTQNFNBSJFA2MNG Example of camera storage;   [obscured]  /products/shootout-backpack-le-small-black.aspx Prefer ability to switch out camera gear as necessary; so prefer hou...
Category: Product Design       

r****a15
 [?]
Sign in to view client's details.
| r****a15
|    United States
Fixed Price: Less than $500   |  Posted: Sep 02, 2015  |  Ends: 1d, 10h  |   26 Proposals
We have done the floor plans in autocad and now we need to do the interior architectural elevation drawings for each of the 3 floors. I have the Autocad file for you to referance. We need this project done professionally and quickly. please let me know if your interested in this project as we need to start asap.
Category: CAD       
Skills: Drafting       

M****oup
 [?]
Sign in to view client's details.
| M****oup
|    Canada
Fixed Price: Less than $500   |  Posted: Sep 02, 2015  |  Ends: 13d, 8h  |   30 Proposals
Hub less Bicycle concept drafted from my drawing to exact measurements, file must be fit to take to fabrication for a working model need finished in five days
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

K****ozi
 [?]
Sign in to view client's details.
| K****ozi
|    United States
Fixed Price: Not Sure   |  Posted: Sep 02, 2015  |  Ends: 13d, 7h  |   21 Proposals
I have an idea for a product, but can't seem to come up with the right design. I need the help of an expert to help complete the design. I will attach a list of what the product will have.
Category: Product Design       

t****093
 [?]
Sign in to view client's details.
| t****093 *
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: Sep 02, 2015  |  Ends: 13d, 5h  |   19 Proposals
I have some CAD models that are very basic, non-colored 3D models in the shape of trophies. I need to hire someone to add color and designs to them for use in a promotional video. There are three different trophy models, two just need to have color added and the third needs to have six different designs applied (baseball, basketball, soccer, golf, bowling, and tennis).
Category: CAD       
Skills: ArchiCAD, 3D Systems       

Q****dio
 [?]
Sign in to view client's details.
| Q****dio
|    United States
Fixed Price: Less than $500   |  Posted: Sep 02, 2015  |  Ends: 12d, 17h  |   7 Proposals
I am looking for a manufacturer that can provide me with prototypes of an iPad case/strap made out of rubber/silicone. I have 3 professionally made 3d images bad on my design to provide you with. I can give approximate sizes but without knowing how soft or flexible the rubber/silicone material is i will need to rely on the manufacturers knowledge and help with their materials. Initially i would only be looking for 3 prototypes for the Kindle or iPad mini designs. Please contact me with an approximate price, time frame and any information you feel may be useful relating to the process.
Category: Product Design       
Skills: Manufacturing       

w****dia
 [?]
Sign in to view client's details.
| w****dia
|    Australia
Fixed Price: Not Sure   |  Posted: Sep 01, 2015  |  Ends: 16h, 27m  |   36 Proposals
I have a PCB that needs a redesign + improvement. It will need to be coded from scratch but it's a simple device. Looking for someone who can do it within 2 weeks as it's a priority job.
Category: Electrical       

t****gak
 [?]
Sign in to view client's details.
| t****gak
|    Australia
Fixed Price: Less than $500   |  Posted: Sep 01, 2015  |  Ends: 12d, 14h  |   65 Proposals
We are a small start-up looking to work with people who I can build long-term relationships with. We decided to start outsourcing some activities we are doing with own resources, more detail will be showed by PM. We are looking for Mechanical engineers, Industrial designer and draftmen. Skills required: Autodesk Inventor - Solidwork - 3D studio - Alias. Knowledge and experience with mechanical drawings, technical drawing (2D), detailed plans, mechanical features. Render and animatons is a plus Please provide your best offer keeping in mind that this would be a regular ongoing volumen work coming your way. Please send me your resumen with a porfolio of your past work. Best regards
Category: CAD       

I****DMA
 [?]
Sign in to view client's details.
| I****DMA
|    Argentina
Fixed Price: Less than $500   |  Posted: Sep 01, 2015  |  Ends: 12d, 12h  |   16 Proposals
We need a Rc Plane designed. The plane needs to be very similar to this one   [obscured]  /hobbyking/store/__27132__Skywalker_X_8_FPV_UAV_Flying_Wing_2120mm_.html We need CNC DFX vector files as part of the design. Further details will be shared on contact.
Category: Product Design       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    Canada
Fixed Price: About $1,500   |  Posted: Sep 01, 2015  |  Ends: 12d, 11h  |   6 Proposals
We need a Laser range finder design and produced. Requirments: 1) Portable 2) Range of 10km 3) Accuracy of +- 10m at 10km Further details will be discussed
Category: Product Design       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    Canada
Fixed Price: Less than $500   |  Posted: Sep 01, 2015  |  Ends: 12d, 9h  |   21 Proposals
Hi there, i'm looking for someone to help design a container for my house, would like to add a bathroom, walk in closet and storage room to my existing house and would rather use a container, would like precise drawings with structural reinforcements.
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

p****ver
 [?]
Sign in to view client's details.
| p****ver
|    South Africa
Fixed Price: Not Sure   |  Posted: Sep 01, 2015  |  Ends: 12d, 8h  |   15 Proposals
Background: We are currently using the nrf51822 as a proximity tag that triggers when the beacon (client) is within a specified distance from the host (transceiver). Scope of Work: Develop firmware to do trigger proximity alarms: 1. In a specified distance from the host transceiver 2. In a specified location from the host transceiver (e.g. front, left, right or back)
Category: Electrical       

c****gjt
 [?]
Sign in to view client's details.
| c****gjt
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job