Save this Search
     
Sort by:
  • Posted Date
Payment Verified
Fixed Price: $1,000 - $5,000   |  Posted: 1h, 18m ago  |  Ends: 29d, 21h  |   0 Proposals
Estoy buscando un arquitecto freelance que pueda realizar un Proyecto de Ejecución para solicitar el acta de replanteo y empezar urgentemente una obra. También necesitaré un arquitecto técnico/aparejador para realizar la dirección de la obra una vez se inicie. Se trata de un proyecto de ejecución de un unifamiliar el Mungia (Vizcaya) y también si lo podría tener preparado y visado para el día 31 de Marzo ya que vence el plazo de la licencia municipal para edificar en el terreno. Será una construcción con estructura de madera. Mandaré a un fabricante hacer la estructura incluyendo aislamiento de 200 mm de lana de roca y carpinteros que me la montarán. Luego, contrataré los gremios uno a uno, para ejecutar cada partida. Me gustaría acercarme mucho a los criterios Passivhauss, sé que llegar a los criterios de la certificación puede llegar a encarecer la obra por lo que si vemos que nos podemos pasar el presupuesto valoraríamos el quedarnos cerca del estándar sin llegar a alcanzar los ...
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: Spain

m****ako
 [?]
Sign in to view client's details.
| m****ako
|    Spain
Fixed Price: Not Sure   |  Posted: 1h, 55m ago  |  Ends: 14d, 21h  |   11 Proposals
Need an Architect to design the floor plans, elevations, renderings and revit design of a Ground +4 building. Hoping to hear back. Regards, BB
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

b****awb
 [?]
Sign in to view client's details.
| b****awb
|    United Arab Emirates
Fixed Price: Not Sure   |  Posted: 2h, 57m ago  |  Ends: 14d, 20h  |   7 Proposals
Create 26.6cm (10.5") adjustable metal arm based on the attached image. Please also study this page:   [obscured]  /noga-arms-by-matthews.html Here is a video that demonstrates how the product will be used:   [obscured]  /94221520 Here are some specifics about the project: - Our design will include a 1/4-20 thumb-nut on the top rather than a recessed threaded hole. - File must be natively created in SolidWorks. - Submit .EASM files to me during the drafting stage. If you don't know what an .EASM file is, then please don't apply for this position. The first time I open your .EASM file it must open correctly. No accidentally suppressed features or geometry in the wrong place. Therefore, test your files before sending them to me. - Aesthetics matter. Be prepared for me to be very, very picky about the symmetry, beauty and aesthetic balance of your design. - You must speak English fluently. Thank you!
Category: Product Design       

h****agi
 [?]
Sign in to view client's details.
| h****agi
|    United States
Fixed Price: Not Sure   |  Posted: 4h, 29m ago  |  Ends: 6d, 19h  |   6 Proposals
Have 3 key injection molded plastic parts that work together as a (patented) system. Material is 30% glass filled nylon. It is an outdoor application and need to model stress/failure under wind force loads. Have step files for key parts. Looking to have FEA done and improvements suggested based on results. There is a 5/8" fiberglass rod that attaches to the bracket and holds a banner and the wind force is applied to that rod. Videos of the system in action are available to help understand.
Category: Mechanical       
Preferred Location: North America

c****ers
 [?]
Sign in to view client's details.
| c****ers
|    United States
Fixed Price: Not Sure   |  Posted: 7h, 28m ago  |  Ends: 14d, 15h  |   4 Proposals
Inkonova AB (based in Sweden) looks for an individual/freelancer to help us in a project. The project consists on the analysis and CFD simulations for a new design of a high speed competition golfdisc. The new design should have improved aerodynamics in terms of giving more range than a reference commercial disc we provide and stability. The person must have their own CFD software license or use open source programs. Can work remotely from anywhere (we sit in Stockholm though). Start: ASAP
Category: CAD       
Skills: CFD, computational fluid dynamics       

p****lol
 [?]
Sign in to view client's details.
| p****lol
|    Sweden
Fixed Price: Less than $500   |  Posted: 13h, 43m ago  |  Ends: 14d, 9h  |   20 Proposals
Make dimension changes to existing STP, DWG files and create new DXF files for lazer cutting. Take existing conveyor design files in stp and DWG and change length, change height of stands, extend motor section and create joiner to new section and new section same as motor section but with out motor - powered from the motor section. Increase roller pitch to 250mm. Create files for Lazer cutting Create Workshop/model/part drawings
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

c****ler
 [?]
Sign in to view client's details.
| c****ler
|    New Zealand
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 14h, 11m ago  |  Ends: 14d, 8h  |   17 Proposals
Hi, I need small jobs done occasionally for my work, I can do the rough plans but I need somebody with a bit more experience to do the final drawings and get the elevations correct. also theirs a little bit of 3D modelling/Artist impression work I need done at odd times as well.
Category: Architecture       
Skills: 3D, Architecture, AutoCAD       
Preferred Location: Australia/Oceania

t****y77
 [?]
Sign in to view client's details.
| t****y77
|    Australia
Hourly Rate: More than $50 / hr   |  Duration: 4-6 months  |  Posted: 15h, 46m ago  |  Ends: 14d, 7h  |   11 Proposals
Expertise in multiple machine learning and Bayes methods algorithms Experience with technical computing languages such as MATLAB or R Knowledge of C++, Python, or Java Experience with object-oriented design and implementation Ability to analyze raw data and analyze using gabor transform for speech and vibrational analysis a big plus
Category: Product Design       

r****esh
 [?]
Sign in to view client's details.
| r****esh
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-3 months  |  Posted: 17h, 39m ago  |  Ends: 14d, 5h  |   22 Proposals
Basic Purpose: ?Looking for an in-house CAD Drafter to develop build drawings leading to final product design and production documentation for manufacturing purposes. Position can last for 3-6 months and possibly longer. Located in Plainfield NJ. Position requires person to supply his/her laptop and preferred CAD application. ?Functional Responsibilities: · ?Develop build drawings from concepts & conceptual drawings · ?Produce designs for manufacturing purposes and CNC equipment · ?Work with manufacturing during the assembly process Requirements and Qualifications: · Intermediate / Advanced skill level in CAD/3D modeling, VectorWorks and Solid Works a plus · ?Intermediate CNC programming skills a plus · Excellent organizational skills · ?Excellent communication skills. · ?Team player Organizational Relationship: · ?Position reports to Senior Design Manager. · ?Salary: $25/hour plus, depending on skill level.(ID: 6942...
Category: CAD       

j****r3d
 [?]
Sign in to view client's details.
| j****r3d
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 18h, 46m ago  |  Ends: 89d, 4h  |   8 Proposals
Looking for a very talented architect and 3d modeller for the following scope of work: No. 2 new conceptuall design in pla view and isometric 4 rendering for the designed approved elevations with textures with emasurements and floor plan with measurements list of material study used in the design and of course space for revisions as you know stunning final presentation with all view and textures etc.I will need also the CAD FILES Please let me have your quote The job will be developed in phase so the priority right now is to have No. 2 design concept for a jewellery kiosk Ideas for the visual style: CONTEMPORARY - MINIMALIST Preferred colors: WHITE Extra notes: THE JOB IS VERY URGENT - THE PHASE 1 CONCEPTUAL DESIGN
Category: CAD       
Skills: 3D Modeling, AutoCAD       
Preferred Location: Western Europe, Eastern Europe, Middle East & Central Asia, Central & South America

m****ano
 [?]
Sign in to view client's details.
| m****ano *
|    Canada
Hourly Rate: $20 - $30 / hr   |  Duration: 7-9 months  |  Posted: 18h, 47m ago  |  Ends: 25d, 1h  |   4 Proposals
We are a high end luxury car dealership and are in need of qualified technicians. This is a very popular and busy dealership. We offer an excellent work environment and facility as well as indoor heated and cooled bays for maximum comfort so you can focus on the quality of your work regardless of the weather outside. As for growth, there is plenty of growth available with this company and we welcome you to take advantage of that. We have state of the art equipment and technology to ensure you have what you need to be successful. We look forward to meeting and working with you! - Devin Auto Barn LLC
Category: Mechanical       

a****nce
 [?]
Sign in to view client's details.
| a****nce
|    United States
Fixed Price: $500 - $1,000   |  Posted: 23h, 29m ago  |  Ends: 6d, 0h  |   6 Proposals
We need a freight friendly packaging design for our product. The products (four of them) are large, in rough terms 50" x 20" x 20' and weighs 50lbs.We are seeking one solution for the four very similar styled procucts. The product is mostly wrought Iron, but easily bent. There are several accessories that need to be packed with the main product one of which are two glass plates. We do not want to use Polystyrene if possible, not for 'eco' reasons but more about cost. We need to be able to stabilise it for a journey from Europe to the USA by sea, then by truck to parts of the USA. If you have experience in developing simple effective solutions for large scale packaging like this, show us what you have done in this area and tell us how much to make the perfect solution for us. We will happily share more information including full CAD drawings and detail with people who we shortlist for this job.
Category: Product Design       

B****cca
 [?]
Sign in to view client's details.
| B****cca
|    New Zealand
Fixed Price: Not Sure   |  Posted: 23h, 48m ago  |  Ends: 1d, 0h  |   9 Proposals
MUST USE AutoCAD Architecture 2013/2014 Using our standards and existing cad refrence drawings 1. Draw existing and new floor plans 2. Draw existing exterior elevations with new 3. Draw A set of working drawings like the attached sheets A1.0, A2.0, A3.0, A5.0, Cover and D1.0. All cad details, blocks etc. we have in house. Only Bid if you know how to use AutoCAD Architecture and are experienced in xrefrencing.
Category: Architecture       
Skills: Autodesk Architecture       
Preferred Location: North America, Western Europe, Eastern Europe, Central & South America, Australia/Oceania

G****gns
 [?]
Sign in to view client's details.
| G****gns
|    United States
Fixed Price: $500 - $1,000   |  Posted: 23h, 51m ago  |  Ends: 13d, 23h  |   23 Proposals
We need blueprints for a new home. I have the basic floor plan and measurements of a house that we want, however there were some changes we wanted to do. I will provide: - The original very basic floor plan and basic known measurements - Our hand drawn desired adjustments - A plat of the size lot we have chosen (we are combining two) Everything that we would like to have in the home will written in and/or drawn in the attachments - the only thing that would b nice to add, if possible, is a way to get to the basement from the master closet into the one of the storage areas that will be converted to a gym later.
Category: Architecture       
Skills: Architecture, AutoCAD, 3D Design, 2D Design       
Preferred Location: United States

a****ser
 [?]
Sign in to view client's details.
| a****ser
|    United States
Fixed Price: Less than $500   |  Posted: Feb 26, 2015  |  Ends: 13d, 21h  |   22 Proposals
We have a basic design of a machine but would like to have some minor design changes made to make it look more modern. Looking for 3-4 different cosmetic design changes.
Category: Product Design       

I****PRP
 [?]
Sign in to view client's details.
| I****PRP
|    United States
Fixed Price: Less than $500   |  Posted: Feb 26, 2015  |  Ends: 13d, 20h  |   35 Proposals
I am working on a Cohousing Project. i am going to need renderings for this project. Eventually I will need a site plan, common house and unit renderings in perspective. Right now i just need the common house. I would like to have both an exterior view and an interior view. This is for marketing purposes so they must be a compelling images NOTE; i have added a document called "rendering examples" which give the flavor of the warmth i am looking for.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD, 3D Rendering       

A****res
 [?]
Sign in to view client's details.
| A****res
|    United States
Fixed Price: Not Sure   |  Posted: Feb 26, 2015  |  Ends: 13d, 20h  |   9 Proposals
This project is new construction. The architectural work is substantially complete and we have CAD. It is a 20 BR/BA group home, one level, with approx 15,000 sq feet. Each room is to have its own controls. There are large common areas. It is to be located in a temperate area with 4 seasons, so heat and cooling is equally a concern, as is the desire for air flow. Apart from that, we are seeking an expert with a general concept that we would select to design and create the documents for the construction of the system. The CAD will be shared in the discussion process.
Category: Mechanical       

t****key
 [?]
Sign in to view client's details.
| t****key
|    United States
Fixed Price: Not Sure   |  Posted: Feb 26, 2015  |  Ends: 13d, 18h  |   17 Proposals
I need a design for a 200 bedded general hospital, with 80 bedded Emergency Department. The land size is 9600m2 (square meters). Please apply with appropriate experience and include your portfolio.
Category: Architecture       
Skills: 3D Modeling, ArchiCAD, Architecture       

m****all
 [?]
Sign in to view client's details.
| m****all
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 26, 2015  |  Ends: 5d, 16h  |   20 Proposals
If any parts of this project is of interest to you ? please let me know. In this build project there was a decision to change the original plan for a house- Existing plans are for a 1- family home. Instead a 2-family home with one apartment on each floor will be built with the same exterior/shell. Further changes are: thinner outer walls: new wall thickness should be 20 cm instead of 40-50 cm which gives more inside space. The stair will be removed as the upper floor will have its own entrance. There should be 2 bathrooms in each apartment. 2nd floor should have its entrance on is south-east facade. That facade can also have windows added. 1st floor entrance can be moved along same facade or to SE or NW facade. Assume no walls are load bearing. Options: Sauna, walk-in closet Attachments: Set of drawings in pdf format Sketchup file. Pictures of plot and environment Picture with model of house inserted ( scale, perspective and placement are not perfect - only to give a...
Category: Architecture       
Skills: 3D, 3D Modeling, Architecture, SketchUp       

k****thh
 [?]
Sign in to view client's details.
| k****thh
|    Sweden
Fixed Price: $500 - $1,000   |  Posted: Feb 25, 2015  |  Ends: 13d, 9h  |   9 Proposals
I am trying for a second time to find a freelancer that can provide mechanical, electrical, programming, and render for a unique idea. We have an idea for a device that can automatically measure and inject detergent, cell phone alert app. to provide alerts when laundry is done, remote programmable, pre-load liquid and powdered detergent to eliminate measurement and save costs. The system will then automatically inject into a washing machine based on computer program. The device must be able to be controlled by an electronic keypad and easy to use. It must also be able to be controlled remotely. It must be easy for even a child. Deliverable will be: 1. 3D CAD model 2. 3D CAD assembly 3. 2D drawing with general dimensions and specification ready for manufacturing 4. 2D drawing of the assembly with BOM(Bill of Materials) 5. 2D drawing for patent application. 6. Electronic PCB 7. Software Skills required: Electrical Engineering, Electronics, Mechanical Engineering, Product Design, Sof...
Category: Mechanical       

m****gen
 [?]
Sign in to view client's details.
| m****gen
Fixed Price: Less than $500   |  Posted: Feb 25, 2015  |  Ends: 13d, 8h  |   14 Proposals
I need a chicken coop designed. It should be octagonal, high up off the ground on four post legs. It should have sides that open so I can clean it easily. Something like this   [obscured]  -media-cache-ak0.pinimg.com/236x/53/a5/2f/53a52f3e38988791980e967fbf135fb5.jpg Or like this:   [obscured]  /t/485370/new-octagon-coop-construction-underway-progress But about 3/4 the size. I need the design drawn up on Auto cade with supplies list so I can have a local carpenter build.
Category: CAD       
Skills: AutoCAD       

j****ser
 [?]
Sign in to view client's details.
| j****ser
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 25, 2015  |  Ends: 13d, 6h  |   10 Proposals
Hi There, We based in Asia, Singapore and have an invention that we would like to bring to a prototype stage. The idea is in it infancy, that said, we have a pretty strong understanding of what we want and the product features. I'd be looking for the following services to cover design and development of the product. Hardware Design and Testing, Prototypes etc. Product assessment and market viability. I.P Strategies and Patent viability. SWOT analysis, product assessment. Of course with all of the above we wil be involved at every level. We previously have designed products and patented them, but nothing like the current idea in discussion. The idea would require someone with engineering and technical know how to bring the product to life by engineering and designing a working prototype and ultimately manufacturing. I see on your profile you offer end to end solutions on the engineering side and the technology assessment side, we currently in the process to identify the right p...
Category: Product Design       

R****hpr
 [?]
Sign in to view client's details.
| R****hpr
|    Singapore
Fixed Price: Not Sure   |  Posted: Feb 25, 2015  |  Ends: 13d, 6h  |   18 Proposals
We are looking for someone, preferably an architect to work up some clean, elegant and unique 3D floor plans for commercial and Industrial properties we have. We are looking for someone who can create 3D floor plans for the following: 1. Site plan (interior and exterior) 2. Building 1 (interior and exterior) NOTE: this building is 2 stories 3. Building 2 (interior and exterior) 4. Building 3 (interior and exterior) 5. Building 4 (interior and exterior) 6. Building 5 (interior and exterior) Note: All of these building will be almost entirely empty (No furniture, machines, etc.) Here is some information of the project including CADs, photos, floor plans, elevations:   [obscured]  /1DkRpLb Some samples of work we like is also in here. Please contact me for explanation on how we see our project going. In your proposal please include the following: 1. Cost for complete the project 2. Turn around time 3. Any additional information you require from us 4. Examples of SIMILAR WORK that yo...
Category: CAD       

g****di1
 [?]
Sign in to view client's details.
| g****di1
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job