Save this Search
     
Sort by:
  • Posted Date
Fixed Price
Fixed Price: Not Sure   |  Posted: 5h, 27m ago  |  Ends: 14d, 18h  |   5 Proposals
REQUIREMENT: 5 YEARS proficiency in SolidWorks design. Must have SolidWorks, version 2014. Files must be submitted to us in version 2014 or earlier. OBJECTIVE: Create a 5-section treatment table design from existing 3 and 7 section designs. E-drawings of the 3 and 7 sections are attached for reference and the complete zipped file will be sent when the job is awarded. The new design should be based on the 3 section design and keep as much of that design as possible. The change being that instead of the head section cushion being one piece, it would be three pieces, similar to that of the 7 section. The sides of the head section are designed to go up and down by use of a gas cylinder, and swing away by pivoting on a post. COMMUNICATION: We will send you log on information for our "Zoom" conference collaboration software. This will enable you to discuss drawings on the screen with Chris here in Anaheim, CA. 1) We will send you a zipped SolidWorks file that you can open &a...
Category: CAD       
Preferred Location: Eastern Europe, India/Southern Asia

r****may
 [?]
Sign in to view client's details.
| r****may
|    United States
Fixed Price: Not Sure   |  Posted: 8h, 32m ago  |  Ends: 14d, 15h  |   4 Proposals
Without getting too much into the meat of the project I am looking for a candidate with a strong background in medical device design to assist me in developing a pressure relief aid to minimize the risk of pressure sores. If this makes sense to you than let's discuss further on the PMB.
Category: Mechanical       

n****per
 [?]
Sign in to view client's details.
| n****per
|    United States
Fixed Price: Less than $500   |  Posted: 11h, 11m ago  |  Ends: 14d, 12h  |   7 Proposals
Hi, I have these sunglasses. The pair that I had made a prototype of lacks curvature that most glasses have. The part that supports the glasses behind the ears are not curve and do not provide support for the glasses to stay on face. So the glasses easily slides off. I need this to be fixed and also ready for 3d printing. Please let me know if you can do it and how much it would cost. Thank you.
Category: Product Design       
Skills: 3D Printing, 3D Design       

D****ere
 [?]
Sign in to view client's details.
| D****ere
|    United States
Fixed Price: $500 - $1,500   |  Posted: 11h, 15m ago  |  Ends: 14d, 12h  |   0 Proposals
We are a start-up activewear brand looking for an experienced freelancer to help with technical design of our women's activewear line. We have illustrations and flats, but need specs/measurement that will help to bring our collection to life (13 - 30 styles). Looking for someone that can provide: - PRIORITY- make additions to our tech packs by providing proper measurements that can be used for garment production - alterations to sample(s) made by factory - finalize changes to tech pack You will need to be dedicated, timely, responsible, savvy, driven, creative, engaging, proactive and make adjustments to the designs until requirements are met. A quick turnaround time is needed. Please provide a portfolio of previous relevant work and indicate any applicable experience. Knowledge of latest trends and fashion in fitness apparel is essential and we are looking for a fashion designer that has worked in PREMIUM athleisure wear. Our line is gear...
Category: Product Design       

t****tia
 [?]
Sign in to view client's details.
| t****tia
|    United States
Fixed Price: Less than $500   |  Posted: 12h, 6m ago  |  Ends: 14d, 11h  |   1 Proposal
Hello, I need a generic obd interface (hardware + plus software) , which can gather all available information provided by the machine and provide it as an xml. The hardware can be configured to monitor certain parameters like - car speed, car pollution efficiency (via some mechanism), braking or zig zag driving. and store this value and when required push it via obd cable (or wifi) based on configuration.
Category: Product Design       
Skills: Electronics, Embedded System, OBD Interface       

S****Vai
 [?]
Sign in to view client's details.
| S****Vai
|    India
Fixed Price: $500 - $1,000   |  Posted: 12h, 31m ago  |  Ends: 14d, 11h  |   2 Proposals
Hello, I need help in designing a prototype for water flow meter. (which can be then updated be measure gas too). Following functionalities are required a) Minimum battery consumption b) Tell volume flow in literes in last x minutes , and should store last n readings. c) On request or or automatic convey the information via ipnetwork to a machine.
Category: Product Design       

S****Vai
 [?]
Sign in to view client's details.
| S****Vai
|    India
Fixed Price: Less than $500   |  Posted: 12h, 40m ago  |  Ends: 14d, 11h  |   14 Proposals
I want to have someone design a coffee table for me. I want it to be primarily black. It has to be made with wood and plastic for an affordable design. I also want it to have hidden storage like the attached examples. However, I want cupholders, a hidden magazine rack, remote holders, and it has to be assembled easily at home. I only want designers with previous experience in furniture design.
Category: Product Design       

M****030
 [?]
Sign in to view client's details.
| M****030 *
|    United States
Fixed Price: Not Sure   |  Posted: 12h, 57m ago  |  Ends: 14d, 11h  |   13 Proposals
CLARIFICATION: We DO NOT need renderings ! We need mill work shop drawings in order for the shop to build it. We need 3d views but they will be line drawings with dimensions. We need drawings to give to a woodworker so he can build this bar. We prefer you do the in autocad / sketckup but if you have other software just mention what you would like to use. Drawings must be in enough detail ( dimensions etc.) so the woodworker can order material and build it . We need plans, elevation details, section and 3d views ( 2 minimum) Attached is a rendering of the design for the bar. Also we have attached a bunk bed design we had done - this shows the quality of what we want for the desk. We do not have any files of the rendering of the bar - sorry/ Please just submit two examples of similar restaurant bars you have done - Please note submissions without a fixed fee will not be considered. Thanks
Category: CAD       
Skills: AutoCAD, SolidWorks, SketchUp Pro, AutoDesk Revit       

s****ner
 [?]
Sign in to view client's details.
| s****ner
|    United States
Fixed Price: Less than $500   |  Posted: 19h, 50m ago  |  Ends: 14d, 4h  |   0 Proposals
I am looking to create a frisbee for a new game i have invented. The frisbee needs to be approx 175g including the electronic timing device. What i hope to achieve is a frisbee that when thrown is just a normal frisbee, but when caught it activates a variable timer 2/3/4/5 sec. The timer then activates LED's to flash if the frisby is not spinning before the time has lapsed. The electronics need to be moulded within the plastic with access to the battery and the switch for on/off and varying the timer needs to be accessible. Finally the unit needs to be waterproof, sand proof etc. As this will predominantly be a beach game.
Category: Product Design       

a****808
 [?]
Sign in to view client's details.
| a****808
|    Australia
Fixed Price: Less than $500   |  Posted: 21h, 4m ago  |  Ends: 6d, 2h  |   13 Proposals
I need CAD drawings similar to the pipe/tubing of the attached image. I will supply the dimensions the curves will be left to you. I have the frame/chassis of the car and will give you the dimensions to work with the pipe/tubing. I will also spec the pipe OD and ID. Joints are to be welded and will be affixed to the car with clamp, nuts and bolts. $200.00 USD is too much for this job. Supplier must be able to communicate in English over the phone.
Category: CAD       
Skills: AutoCAD, AutoCAD 2012       

R****uma
 [?]
Sign in to view client's details.
| R****uma
|    United States
Fixed Price: Less than $500   |  Posted: Jul 29, 2015  |  Ends: 13d, 20h  |   20 Proposals
The purpose of this job is to design and fabricate a mold for some prototype parts I am developing. I have drafted most of the specifications and dimensions for the mold in Visio. I would need you to assess my proposal and offer solutions / changes needed to actually fabricate it.
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       
Preferred Location: North America

m****bes
 [?]
Sign in to view client's details.
| m****bes
|    United States
Fixed Price: Not Sure   |  Posted: Jul 29, 2015  |  Ends: 13d, 16h  |   10 Proposals
I am seeking an mechanical engineer or firm that can help me develop a working prototype for a new product that involves something close to a spring roller shade with a modified cover or attachment bracket. Would like someone with experience that can also suggest cost-effective manufacturing methods. Would like someone with a good rating and multiple jobs completed. Must be willing to sign NDA. If interested, please reply with examples of your previous work. Please include keywords Roller Shade in your response.
Category: Product Design       

G****ner
 [?]
Sign in to view client's details.
| G****ner
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jul 29, 2015  |  Ends: 58d, 8h  |   33 Proposals
We are company based in Singapore and we are looking for a freelancer mechanical engineer with excellent skills in mechanical design and Solidworks. Are you up for the challenge? this job would like to divid into 3 tasks Estimated 1- The new design for the base and retractable cover ( 10-15 hours ) 2- The mechanical system with locking safety ( 20-40 hours ) 3- The gear box with the alternator ( power transmission ) ( 10-20 hours ) hours estimate depending on the skills of the freelancer ,,i prefer to go Task by task , at least we test the skills and experience of the freelancer Responsibilities: - Be available for a 6 month commitment for this part time, home based project! - Scope of work according to Smart Hump components : 1- First & second Ramp design details ( mechanism, shock absorber, etc ); 2- Mechanical feeding system to flywheel; 3- Design mechanical system to Generator; 4- Automatic Locking system for Ramps ( fail save, different vehicle weight with sensors ); 5- Hu...
Category: Mechanical       

I****015
 [?]
Sign in to view client's details.
| I****015
|    Singapore
Fixed Price: Less than $500   |  Posted: Jul 29, 2015  |  Ends: 13d, 8h  |   21 Proposals
I am a tiny house builder and need to create about 15-20 plans for 15-20 tiny house models. There are primarily 3 different models we offer, but need plans for the following sizes of each model which is: 8x16 8x18 8x20 8x24 8x28 I need these plans to be stupid simple for my guys to read showing all studs 16" on center with simple dimensions showing where everything goes. I like to have the plans show a arial view and a direct view of the walls showing studs, and all the openings. I need the following pages done: - Floor Framing Plan - Wall Framing Plan - Roof Framing Plan - Insulation Plan - Window Schedule - Cabinet Plan - Stairway Plans - Electrical Plan - Plumbing Plan
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       

m****ter
 [?]
Sign in to view client's details.
| m****ter
|    United States
Fixed Price: Not Sure   |  Posted: Jul 29, 2015  |  Ends: 13d, 7h  |   27 Proposals
Hello, I've designed a small PCB board which has an LCD, SD Card, Network connection and USB and would like to find a suitable enclosure for it. I'm new to this and not sure what is the right way to proceed, but thinking of using a ready made enclosure and doing the cuts using cnc. I'm thinking something like the following case can do:   [obscured]  /pdf/1593Q.pdf. I really like to hear more of what the options are.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

y****rf1
 [?]
Sign in to view client's details.
| y****rf1
Fixed Price: Not Sure   |  Posted: Jul 29, 2015  |  Ends: 13d, 3h  |   12 Proposals
We are an Australian start up creating quality underwear and tshirts for men and women. We have a supplier for our T-shirts from Indonesia which allows us to do small qty orders. The problem is its hard to find anyone here that will do underwear. We need help finding a factory/supplier in china who will do small qty orders. We need the factory to create us a sample so we can check quality. This will be women and men's underwear that is mostly cotton. The elastic wasteband we have a supplier in China but happy to use the factory we team up with if quality can match. We have samples that we need copying with some minor altercations. Look forward to finding someone who can assist us with the process and into the future as things grows. Please put your per hour charge or an offer to us for total price so we can get an idea of what your are offering. Look forward to finding the right person to join this exiting opportunity.
Category: Product Design       

L****012
 [?]
Sign in to view client's details.
| L****012
|    Australia
Fixed Price: Less than $500   |  Posted: Jul 28, 2015  |  Ends: 4d, 18h  |   11 Proposals
Looking for someone with advanced FEA skills to create a model of a simple impact socket wrench having specific material and dimensions properties (supplied), and then simulate an air impact wrench loading on this socket for the purpose of optimizing the mass of the socket for a specific target load. Modeling the load of an impact wrench is not simple and built in features in AutoCAD are not what we want. This is not the same as a static load, hence the need for someone with the advanced knowledge to model this correctly and simulate needed conditions. Details of hammer mass inside the impact wrench are different for every brand and model, so will need to be approximated. We can supply ballpark figures of rotational load and spikes of impact typical to an average model. Resistance to spinning is based on thread friction between bolt and nut and given CoF with no lubricant. Here we can assume full tightness and allow no rotation, however some torque will still be absorbed or transferr...
Category: Mechanical       

W****ce9
 [?]
Sign in to view client's details.
| W****ce9
|    United States
Fixed Price: $50 - $200   |  Posted: Jul 28, 2015  |  Ends: 12d, 14h  |   3 Proposals
I need patent drawings for a new dog jacket product that we are going to patent. The drawing should be completed as per the requirements of the US patent office. The file format will be determined by the patent office. There will be two drawings. The first will be an illustration of the jacket and the second will be a illustration of how it functions. The drawings will include at a minimum, type of material, buckle locations, etc.
Category: Product Design       

d****015
 [?]
Sign in to view client's details.
| d****015
|    United States
Fixed Price: Not Sure   |  Posted: Jul 28, 2015  |  Ends: 4d, 11h  |   42 Proposals
I need a capable poduct designer/engineer for a sheet metal part (see attached sketch) used to mount on a backpack strap. It should be made of aluminium. As the first Batches of the product will be small, it should be laser cut and bended (not injection-molded) and CNC machined. Additionaly (as a part of this job but not shown as a sketch) I need a small wheel (around 5 cm diameter) with a 1/4 inch thread in the middle. For the later manufacturing process I need the CAD drawings converted to step files. Before starting you need to sign the sample elance Non-Disclosure Arrangement. Some model photos upon request.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

t****rac
 [?]
Sign in to view client's details.
| t****rac
|    Germany
Fixed Price: Not Sure   |  Posted: Jul 28, 2015  |  Ends: 12d, 7h  |   2 Proposals
I would like to put tiny stones in the cross, the rest of the brooch will be metal, and round, I would want to see the cross really stand out, it will be red tiny stones.
Category: CAD       

M****ira
 [?]
Sign in to view client's details.
| M****ira
|    United States
Fixed Price: Not Sure   |  Posted: Jul 28, 2015  |  Ends: 12d, 6h  |   4 Proposals
looking for a company to design and prototype a sliding gate motor with remote controls. A sample sliding motor with remotes will be provided to the right company. The manufacture cost of the motor must be $50. Company must have mechanical and electronic design experience. A sample sliding gate motor can be provided to aid in the design. Most important aspect is to reduce production cost of the motor. Target production cost must be no higher than $50.
Category: Product Design       

r****014
 [?]
Sign in to view client's details.
| r****014 *
|    South Africa
Fixed Price: Less than $500   |  Posted: Jul 28, 2015  |  Ends: 12d, 5h  |   1 Proposal
Hi, We need complete working design with working model of 40 MHz 20 W RF Amplifier. For design consideration 1) Input will power 12V DC 2) Facility to interface the amplifier with microcontroller - for setting frequency from 40MHz to 41MHz - for setting sensing o/p watts. - to Turn ON/OFF RF output. 3) Load will be capacitive
Category: Product Design       
Preferred Location: India

A****001
 [?]
Sign in to view client's details.
| A****001
|    India
Fixed Price: About $400   |  Posted: Jul 28, 2015  |  Ends: 12d, 2h  |   10 Proposals
Feasability study with regards to adding bluetooth technology to existing odometer for sports gadget. The study should comprise the following: 1) Technical Analysis: 1-a) Detailed design description of current design 1-b) Highlighting changes in the design 1-c) Propose new design block diagram 1-d) Functionality of each block 2) Financial Analysis 2-a) List of proposed components along with cost - unit and bulk prices (BOM) 2-b) Packaging material cost 2-c) Manufacturing cost (FOB preferably) Attached a file that describes the entire project where this feasibility report is the first step to go from idea to manufacturing.
Category: Product Design       

N****ert
 [?]
Sign in to view client's details.
| N****ert
|    Netherlands
Fixed Price: Less than $500   |  Posted: Jul 28, 2015  |  Ends: 11d, 23h  |   23 Proposals
This job is to take 8 .STL files from a 3D scanner and clean up the imperfections from those scans into 4 .STL files. The files are from the scan of the front and back of a sheet metal stamping. What I want to do is combine the front and back with the known sheet metal thickness into a single .STL file. The sheet metal is flat and I want the letters to be consistent and uniform. I am looking to have 2 of these done ASAP. (The WILLYS ones in the example.)
Category: Product Design       

a****eep
 [?]
Sign in to view client's details.
| a****eep
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job