Save this Search
     
Sort by:
  • Posted Date
Time Left: Less than 3 days
Fixed Price: $40 - $60   |  Posted: 6h, 29m ago  |  Ends: 1d, 17h  |   22 Proposals
I have a hand drawing of commercial building which was drawn to scale (1/4"=1'-0"), that need to be drawn in Auto CAD. The drawings are attached, one floor plan and two sheets of elevations. You may need to print out the plan and measure each wall and draw them into Auto CAD 2010 file format or earlier. I will include a CAD file done for the first phase of the project for your use. That will help making the task easier. Some interior dimensions are included. They are from face of interior wall to another face of interior wall. You will have to use architectural scale to measure the rest. End product shall be in 2D Auto CAD format, 2010 version or earlier. All lines are to be "Poly line". The drawing shall have exterior dimensions around the building in designated layer. Doors and windows shall be on separate layers. No border is needed. You may ignore the north arrow. Questions are encouraged. I need this done by Thursday July 9th, 1AM Pacific Standard Time....
Category: CAD       

W****ile
 [?]
Sign in to view client's details.
| W****ile
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jul 06, 2015  |  Ends: 1d, 8h  |   32 Proposals
Looking for an experienced industrial designer to create a consumer product enclosure. The product is based on a small (20cm x 10cm) PCB The basic idea is to draft a design, 3d print or build a prorotype and help our team all the way to manufacturing. Please only apply if you have extensive experience in the field. Good luck!
Category: Product Design       

E****eer
 [?]
Sign in to view client's details.
| E****eer
|    Chile
Fixed Price: Not Sure   |  Posted: Jun 25, 2015  |  Ends: 2d, 23h  |   2 Proposals
Hello, I am looking for a small project development of "Micro SD Memory Card Write Protection On & OFF with Password Protection". Basically I would like to protect the data which i have copied to Micro SD Card from Delete, Format. So, kindly bid for the above who are interested to do the above project in Embedded Systems.
Category: Product Design       

C****ONE
 [?]
Sign in to view client's details.
| C****ONE
|    India
Fixed Price: Not Sure   |  Posted: Jun 25, 2015  |  Ends: 2d, 16h  |   0 Proposals
Hi, This is a one time gig. I have a working Epson 1400 (a3 format) that is dissembled but working. I would like to convert it to a DTG with flatbed.. See link:   [obscured]  /shop/442/DIY-DTG-Epson-1400-Complete-Plans--Digital-Download I have the plans available (there aren't written properly) so prefer someone who has done this before or is comfortable doing it. I can send you the plans if you want to see them (plans from Alienbunker). Here one of a working sample:   [obscured]  /watch?v=GshvmHIIBaA There are other printers Epson 1400 into DTG on youtube. I am based in Brooklyn, so prefer people from New York or the Area so I can deliver the printer. Let me know how much you charge for it , THANKS :) Looking forward,
Category: Mechanical       
Preferred Location: United States

d****rio
 [?]
Sign in to view client's details.
| d****rio
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jun 25, 2015  |  Ends: 2d, 15h  |   11 Proposals
This device will sit on a standard tripod fitting, so that it can be raised or lowered. The end result will be a projection, in a darkened room, through a transparency film (or otherwise) of a pattern of celestial constellation stars. The raising or lowering will cause the image to expand on the ceiling from a ten foot by ten foot room (3meter x 3meter) to a larger room up to twenty by twenty. This would also allow a projection of a few constellations or more constellations on the ceiling. I imagine a box with a few selections of transparency film at the top of the box and a light source inside that can be hightened or lowered to create the appropriate sized projected image on the ceiling. But having said that... I'm probably way off! LOL! I'm looking for a final design and prototype that can easily be assembled by most anyone, with stock material that we can find that would be readily available from suppliers.
Category: Product Design       

V****r88
 [?]
Sign in to view client's details.
| V****r88
|    United States
Fixed Price: $20 - $60   |  Posted: Jun 25, 2015  |  Ends: 2d, 13h  |   14 Proposals
Hello, I need your help with refining my product design. Currently, I have 3D images of a general look of how I would like the product to look but the design is not fully functional or practical. My product is a Macbook Pro Case that has liquid and glitter inside of it, giving a snowglobe effect within the case. I need help figuring out how to piece this case together and how to get the glitter and liquid inside. I have spoken to a manufacturer and they say that they would be able to create my parts but would not be able to add the liquid and glitter inside, so that means it would be left up to me to perform that duty, which makes it vital that I find a way I can insert the liquid and glitter myself and have the product be reliable when it comes to not leaking and being sturdy. Would you be able to help me figure out how to piece everything together? P.s. If you are able to help, I would then like to hire you (if you would like) to create a 3D image (CAD) of the case we refined so I...
Category: Product Design       

b****ung
 [?]
Sign in to view client's details.
| b****ung
|    United States
Fixed Price: Less than $500   |  Posted: Jun 25, 2015  |  Ends: 2d, 4h  |   14 Proposals
Implementation of a thermal analysis on a PCB By the supplied scheme. The PCB is located in an enclosure made of multiple materials: Plastic, screws and metal. General description of PCB and enclosure can be found in the attached images. Ambient temperature is 50 degrees Celsius. 3D models and required details will be supplied by demand. Please specify the required information and delivery time in your quotation.
Category: Mechanical       

p****nuk
 [?]
Sign in to view client's details.
| p****nuk
|    Israel
Fixed Price: Less than $500   |  Posted: Jun 25, 2015  |  Ends: 2d, 0h  |   8 Proposals
Looking for renderings of our initial product designs for use in marketing materials and sending to manufacturers. Experience in design and product development of fitness / consumer products preferred. Person must understand the technology and develop & design the system within 4 weeks. Will send out full project details upon request Sincerely! North Lion Team
Category: Product Design       

N****oup
 [?]
Sign in to view client's details.
| N****oup
|    United States
Fixed Price: Not Sure   |  Posted: Jun 24, 2015  |  Ends: 1d, 13h  |   5 Proposals
I'm looking for design of a low power soc embedded linux module. I can point to a design/schematic, but I would want to use a low power soc and do some modifications to it, when applying please send links to five of the most recent design/accomplishments. Thanks
Category: Product Design       

b****aws
 [?]
Sign in to view client's details.
| b****aws
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jun 24, 2015  |  Ends: 1d, 11h  |   18 Proposals
Many disposable, plastic flow sensors exist for human patients. We would like to create a large bore flow sensor for large animals that is similar to existing human patient flow sensors. The idea is to modify an existing design to make it larger (human is 15mm, animal should be 30-50mm) and maintain reasonable accuracy. Draw up the design in CAD and 3D print a prototype version for test and evaluation. 3D modeling is possible and beneficial, but not required if a more "try and evaluate" approach is taken. Depending on the prototype success, follow on work will be available.
Category: Mechanical       

n****ano
 [?]
Sign in to view client's details.
| n****ano
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jun 24, 2015  |  Ends: 1d, 7h  |   9 Proposals
The project is to design and manufacture a robot that will change the gear of a manual transmission (which would require use of additional actuators to engage the clutch) upon desired speed or acceleration. The mount for the system should be universal so that it could be mounted on any car.
Category: Product Design       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    Canada
Fixed Price: $65 or less   |  Posted: Jun 24, 2015  |  Ends: 1d, 2h  |   10 Proposals
Need a knifeline designed for a Gravity Chute Style hangsell created from E-Flute corrugated cardboard. Hangsell will hold tablet products. Rough sketches supplied.
Category: CAD       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       

P****ory
 [?]
Sign in to view client's details.
| P****ory
|    Australia
Fixed Price: Not Sure   |  Posted: Jun 24, 2015  |  Ends: 1d, 1h  |   3 Proposals
I'm look for someone who can make these shelves for my shoe store and the front layout of the counter space but with just 1 cash register and the rest a glass display case.
Category: Product Design       
Preferred Location: United States

t****nes
 [?]
Sign in to view client's details.
| t****nes
|    United States
Fixed Price: Not Sure   |  Posted: Jun 23, 2015  |  Ends: 11h, 38m  |   78 Proposals
We currently have approximately 120 products, none of which have up-to-date technical drawings with measurements. We need someone to take our products and create drawings based on the original samples we have.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, Product Design       
Preferred Location: United States

b****ntr
 [?]
Sign in to view client's details.
| b****ntr
|    United States
Fixed Price: Not Sure   |  Posted: Jun 23, 2015  |  Ends: 10h, 48m  |   15 Proposals
Hello, I am in need of custom silicon molds to be used for high volume baking of cakes. The molds will be very small and the dimensions should be approximately: Bottom: Round with a diameter of 4cm Top: Round with a diameter of 5cm Height: approximately 3cm Count: 48 cakes per mold While we would like quotes based upon 48 cakes, we may also look for larger counts eventually. And to be clear, we will need a template, not a "trial / temporary" prototype. For the quote we would like to know the following: - Price for the first mold / template - Price for each additional mold - Time to produce the first mold and template, i.e. final delivery date I will also note that we will have a variety of other production available (boxes, plastic containers, etc) but want to use this as a first step to further work. Thank You Marley
Category: Product Design       

M****uez
 [?]
Sign in to view client's details.
| M****uez
|    United States
Fixed Price: Less than $500   |  Posted: Jun 23, 2015  |  Ends: 7h, 3m  |   8 Proposals
Product design Carryon and Luggage travel bag. Intensive clear communication required. Detail oriented product designers. New technology and innovation, integrated. Respecting deadline is a must, no laziness, slacking, and couch bums. Big rewards and surprises when project is launched. Promising future project, jobs, + international exposure. If you like to work in teams please apply, show us your sample work, get the job done and bammmm welcome to our world of innovation and opportunities.
Category: Product Design       

J****rch
 [?]
Sign in to view client's details.
| J****rch
|    United States
Fixed Price: $125 or less   |  Posted: Jun 15, 2015  |  Ends: 13h, 2m  |   43 Proposals
I have 14 acres of land and need a 3D rendering of a small hotel and restaurants. I have site plan and architectural drawings of the hotel already. I can give CAD drawings of the hotel. This is a rendering of the exterior only.
Category: CAD       
Skills: 3D Modeling, AutoCAD       

s****tte
 [?]
Sign in to view client's details.
| s****tte
|    United States
Fixed Price: More than $10,000   |  Posted: Jun 14, 2015  |  Ends: 2d, 5h  |   10 Proposals
DUE TO DISTANCE WE ARE LOOKING PRIMARILY FOR FREELANCERS FROM EUROPE! We need table with two screens and a computer. One screen is used by medilcal staff and the other screen is used by the patient. The test is about optical tests of patients. The screen is positioned flat on the table, the mirror is positioned 45 degrees above the screen, the patient is looking: 1) Via the mirror on the flat screen (screen distance testing), or 2) the mirror is flapped down and the patient is looking straight forward a 500 cm distant poster on the wall. 1st Milestone that we want to cover with : Buy the later specified WIN laptop, the later specified screen, height adjustable table, mirror and wooden material Carve/mill the wood so that all fits smooth onto the height adjustable desk. Download the software and make some fundamental tests. Get OK on the tests. Paint the wood in white Ship this first unit to Holland. Wait for approval Build another five units
Category: Mechanical       

h****e27
 [?]
Sign in to view client's details.
| h****e27
|    Sweden
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job