Save this Search
     
Sort by:
  • Posted Date
Mechanical
Fixed Price: More than $10,000   |  Posted: Jun 25, 2015  |  Ends: 34d, 5h  |   8 Proposals
Looking to design a continuous LIDAR system. Please see attached RFP for parameters of an expansion of our current system to handle continuous data acquisition.
Category: Mechanical       
Skills: Remote Sensing, Robotics, Computer vision       

j****arr
 [?]
Sign in to view client's details.
| j****arr
|    United States
Fixed Price: Not Sure   |  Posted: Jun 25, 2015  |  Ends: 8d, 6h  |   0 Proposals
Hi, This is a one time gig. I have a working Epson 1400 (a3 format) that is dissembled but working. I would like to convert it to a DTG with flatbed.. See link:   [obscured]  /shop/442/DIY-DTG-Epson-1400-Complete-Plans--Digital-Download I have the plans available (there aren't written properly) so prefer someone who has done this before or is comfortable doing it. I can send you the plans if you want to see them (plans from Alienbunker). Here one of a working sample:   [obscured]  /watch?v=GshvmHIIBaA There are other printers Epson 1400 into DTG on youtube. I am based in Brooklyn, so prefer people from New York or the Area so I can deliver the printer. Let me know how much you charge for it , THANKS :) Looking forward,
Category: Mechanical       
Preferred Location: United States

d****rio
 [?]
Sign in to view client's details.
| d****rio
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jun 25, 2015  |  Ends: 8d, 5h  |   11 Proposals
This device will sit on a standard tripod fitting, so that it can be raised or lowered. The end result will be a projection, in a darkened room, through a transparency film (or otherwise) of a pattern of celestial constellation stars. The raising or lowering will cause the image to expand on the ceiling from a ten foot by ten foot room (3meter x 3meter) to a larger room up to twenty by twenty. This would also allow a projection of a few constellations or more constellations on the ceiling. I imagine a box with a few selections of transparency film at the top of the box and a light source inside that can be hightened or lowered to create the appropriate sized projected image on the ceiling. But having said that... I'm probably way off! LOL! I'm looking for a final design and prototype that can easily be assembled by most anyone, with stock material that we can find that would be readily available from suppliers.
Category: Product Design       

V****r88
 [?]
Sign in to view client's details.
| V****r88
|    United States
Fixed Price: $20 - $60   |  Posted: Jun 25, 2015  |  Ends: 8d, 3h  |   14 Proposals
Hello, I need your help with refining my product design. Currently, I have 3D images of a general look of how I would like the product to look but the design is not fully functional or practical. My product is a Macbook Pro Case that has liquid and glitter inside of it, giving a snowglobe effect within the case. I need help figuring out how to piece this case together and how to get the glitter and liquid inside. I have spoken to a manufacturer and they say that they would be able to create my parts but would not be able to add the liquid and glitter inside, so that means it would be left up to me to perform that duty, which makes it vital that I find a way I can insert the liquid and glitter myself and have the product be reliable when it comes to not leaking and being sturdy. Would you be able to help me figure out how to piece everything together? P.s. If you are able to help, I would then like to hire you (if you would like) to create a 3D image (CAD) of the case we refined so I...
Category: Product Design       

b****ung
 [?]
Sign in to view client's details.
| b****ung
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 25, 2015  |  Ends: 8d, 2h  |   25 Proposals
We are looking for an engineer with FEA experience to perform an analysis on a lifting arm. The preference is for Autodesk Nastran.
Category: Mechanical       
Skills: Finite Element Analysis       

J****sNT
 [?]
Sign in to view client's details.
| J****sNT
|    Vietnam
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: Jun 25, 2015  |  Ends: 8d, 1h  |   31 Proposals
I have a design/idea/invention that I want to get patented. I have a small model that can be used to draw out my plan in details.
Category: Product Design       

k****nco
 [?]
Sign in to view client's details.
| k****nco
|    United States
Fixed Price: Not Sure   |  Posted: Jun 25, 2015  |  Ends: 83d, 1h  |   9 Proposals
Estimator to bid New Construction projects for Plumbing contractor. Looking for fast turn around time and pay on a per job or hourly basis.
Category: Mechanical       

T****Guy
 [?]
Sign in to view client's details.
| T****Guy
|    United States
Fixed Price: Less than $500   |  Posted: Jun 25, 2015  |  Ends: 8d, 0h  |   7 Proposals
Thank you for your interest in this job posting. My company seeks and experienced eyewear designer who was worked on eyewear design projects before and who is knowledgeable of the intricate details it takes for a pair of sunglasses to not only look great, but for it to also fit great. We already have a succinct model that you will be basing your design work around. At this time, the model has been 3d printed and it still doesn't fit perfectly. This is why we need you to have experience in designing and/or manufacturing eyewear so that you can identify and fix whatever the issue is causing it to not fit right. In your proposal please submit some recent work and describe to us how you are qualified for the task, highlighting in particular how you will go about evaluating the dimensions of the current model, what standard you will be comparing it to, and the way in which you will make changes. The timeline of this project can be however long it needs to be to get this right. Once...
Category: Product Design       

d****li6
 [?]
Sign in to view client's details.
| d****li6
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Jun 25, 2015  |  Ends: 7d, 22h  |   15 Proposals
I wish to build several types of Pilates Exercise machine known as the Reformers, Cadillacs, Chairs etc. I am looking for someone suitably qualified in Autocad design and possibly someone who is aware of these type of machines, to design my vision so I can then get them manufactured. Thank you. Lisa Walsh
Category: CAD       
Skills: Graphic Design, AutoCAD, 3D Design       

P****ody
 [?]
Sign in to view client's details.
| P****ody
|    Ireland
Fixed Price: Less than $500   |  Posted: Jun 25, 2015  |  Ends: 7d, 18h  |   14 Proposals
Implementation of a thermal analysis on a PCB By the supplied scheme. The PCB is located in an enclosure made of multiple materials: Plastic, screws and metal. General description of PCB and enclosure can be found in the attached images. Ambient temperature is 50 degrees Celsius. 3D models and required details will be supplied by demand. Please specify the required information and delivery time in your quotation.
Category: Mechanical       

p****nuk
 [?]
Sign in to view client's details.
| p****nuk
|    Israel
Fixed Price: Less than $500   |  Posted: Jun 25, 2015  |  Ends: 7d, 14h  |   8 Proposals
Looking for renderings of our initial product designs for use in marketing materials and sending to manufacturers. Experience in design and product development of fitness / consumer products preferred. Person must understand the technology and develop & design the system within 4 weeks. Will send out full project details upon request Sincerely! North Lion Team
Category: Product Design       

N****oup
 [?]
Sign in to view client's details.
| N****oup
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 24, 2015  |  Ends: 7d, 7h  |   18 Proposals
We look on regular base for freelancer who are professional Geomagic Design X user. Based on STL files (geometry + freeform) you have to create parametric CAD-Files (Step + iges). Looking forward to receive your application.
Category: CAD       
Skills: 3D Design       

3****fan
 [?]
Sign in to view client's details.
| 3****fan
|    Germany
Hourly Rate: $10 - $15 / hr   |  Duration: 3-4 weeks  |  Posted: Jun 24, 2015  |  Ends: 7d, 6h  |   2 Proposals
I am wanting to produce and sell a performance enhancing powder containing different amino acids etc. I want to know if certain ingredients can be combined and safely ingested, where is a reliable and cost effective place to source them, how much they cost, if a supplier could mix and package the ingredients for me, package design and manufacturing and distribution including set up of online website and marketing. I want someone to research the above mentioned and contact suppliers and manufacturers etc for me.Thanks
Category: Product Design       

O****a22
 [?]
Sign in to view client's details.
| O****a22
|    Australia
Fixed Price: Not Sure   |  Posted: Jun 24, 2015  |  Ends: 7d, 2h  |   5 Proposals
I'm looking for design of a low power soc embedded linux module. I can point to a design/schematic, but I would want to use a low power soc and do some modifications to it, when applying please send links to five of the most recent design/accomplishments. Thanks
Category: Product Design       

b****aws
 [?]
Sign in to view client's details.
| b****aws
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jun 24, 2015  |  Ends: 7d, 0h  |   18 Proposals
Many disposable, plastic flow sensors exist for human patients. We would like to create a large bore flow sensor for large animals that is similar to existing human patient flow sensors. The idea is to modify an existing design to make it larger (human is 15mm, animal should be 30-50mm) and maintain reasonable accuracy. Draw up the design in CAD and 3D print a prototype version for test and evaluation. 3D modeling is possible and beneficial, but not required if a more "try and evaluate" approach is taken. Depending on the prototype success, follow on work will be available.
Category: Mechanical       

n****ano
 [?]
Sign in to view client's details.
| n****ano
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 24, 2015  |  Ends: 6d, 23h  |   6 Proposals
Product Development Requirements 1. Use removable battery, small size OR Rechargeable 2. Can measuring body size by using 2 tapes one on top not showing in the images, Please see Draft Image, 3. Communicate with Smartphone APP 4. APP programming 5. Compact And light Design
Category: Product Design       

N****ver
 [?]
Sign in to view client's details.
| N****ver
|    Ireland
Fixed Price: $500 - $1,000   |  Posted: Jun 24, 2015  |  Ends: 6d, 21h  |   8 Proposals
The project is to design and manufacture a robot that will change the gear of a manual transmission (which would require use of additional actuators to engage the clutch) upon desired speed or acceleration. The mount for the system should be universal so that it could be mounted on any car.
Category: Product Design       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    Canada
Fixed Price: $65 or less   |  Posted: Jun 24, 2015  |  Ends: 6d, 16h  |   9 Proposals
Need a knifeline designed for a Gravity Chute Style hangsell created from E-Flute corrugated cardboard. Hangsell will hold tablet products. Rough sketches supplied.
Category: CAD       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       

P****ory
 [?]
Sign in to view client's details.
| P****ory
|    Australia
Fixed Price: Not Sure   |  Posted: Jun 24, 2015  |  Ends: 6d, 15h  |   3 Proposals
I'm look for someone who can make these shelves for my shoe store and the front layout of the counter space but with just 1 cash register and the rest a glass display case.
Category: Product Design       
Preferred Location: United States

t****nes
 [?]
Sign in to view client's details.
| t****nes
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 3-4 weeks  |  Posted: Jun 23, 2015  |  Ends: 6d, 5h  |   9 Proposals
Need a miniature latch/lock structure for a 1x1 inch small opening door(a few mm thick). The latch/lock should be open/close by a low voltage electrical control mechanism, as well as manually. The Opening itself does not have to endure pressure or hard physical condition. Would like to have as much existing components as possible, for low-cost purpose. Try to avoid re-design a whole new 3D structure.
Category: Mechanical       

b****015
 [?]
Sign in to view client's details.
| b****015
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Jun 23, 2015  |  Ends: 6d, 2h  |   5 Proposals
Hi there, Are you comfortable with writing a simple step by step training manual for a 3D model that includes designmodeler and meshing? Possible to complete by next Monday. Hope to hear from you soon! Thank you
Category: CAD       

K****tmj
 [?]
Sign in to view client's details.
| K****tmj
|    Singapore
Fixed Price: Not Sure   |  Posted: Jun 23, 2015  |  Ends: 6d, 1h  |   71 Proposals
We currently have approximately 120 products, none of which have up-to-date technical drawings with measurements. We need someone to take our products and create drawings based on the original samples we have.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, Product Design       
Preferred Location: United States

b****ntr
 [?]
Sign in to view client's details.
| b****ntr
|    United States
Fixed Price: Not Sure   |  Posted: Jun 23, 2015  |  Ends: 6d, 0h  |   15 Proposals
Hello, I am in need of custom silicon molds to be used for high volume baking of cakes. The molds will be very small and the dimensions should be approximately: Bottom: Round with a diameter of 4cm Top: Round with a diameter of 5cm Height: approximately 3cm Count: 48 cakes per mold While we would like quotes based upon 48 cakes, we may also look for larger counts eventually. And to be clear, we will need a template, not a "trial / temporary" prototype. For the quote we would like to know the following: - Price for the first mold / template - Price for each additional mold - Time to produce the first mold and template, i.e. final delivery date I will also note that we will have a variety of other production available (boxes, plastic containers, etc) but want to use this as a first step to further work. Thank You Marley
Category: Product Design       

M****uez
 [?]
Sign in to view client's details.
| M****uez
|    United States
Fixed Price: Less than $500   |  Posted: Jun 23, 2015  |  Ends: 5d, 20h  |   7 Proposals
Product design Carryon and Luggage travel bag. Intensive clear communication required. Detail oriented product designers. New technology and innovation, integrated. Respecting deadline is a must, no laziness, slacking, and couch bums. Big rewards and surprises when project is launched. Promising future project, jobs, + international exposure. If you like to work in teams please apply, show us your sample work, get the job done and bammmm welcome to our world of innovation and opportunities.
Category: Product Design       

J****rch
 [?]
Sign in to view client's details.
| J****rch
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job