Save this Search
     
Sort by:
  • Posted Date
Fixed Price: Less than $500   |  Posted: 43 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
Hi I require some concept drawing idea for a planning hull trailer able house boat. I want to be able to easily live in it if it is on to water or at a campsite. I had some plans but they are a little to 1960's and the other plans I have are a little to modern so a look somewhere in the middle. requirements - no wider that 2.4m no longer that 7m - room for lots solar panels - planning hull with 90hp on back - aerodynamic for towing on trailer - room for 3.3m dinghy and 15hp outboard on roof (for transit) and docking tie up at rear (when in water) - covered deck area Keywords boat marine design 3d navel naval ship
Category: Product Design       

a****iwi
 [?]
Sign in to view client's details.
| a****iwi
|    New Zealand
Fixed Price: Not Sure   |  Posted: 2h, 19m ago  |  Ends: 14d, 21h  |   5 Proposals
Build an attractive and easy to manufacture electronics enclosure to be used in a next generation wi-fi connected IoT device. Approximate dimensions of the enclosure is 180 mm x 180 mm x 70mm. The enclosure will be wall mounted with an attractive snap cover. The base houses a PCB and Terminal Block(s). The cover should house status LEDs. There may be an ON/OFF switch as well (TBD) Attractive design and easy manufacturability is a must.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, 3D Design       

p****ara
 [?]
Sign in to view client's details.
| p****ara
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: 4h, 40m ago  |  Ends: 14d, 19h  |   2 Proposals
Design............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
Category: Mechanical       
Skills: CATIA, Autodesk       

M****nir
 [?]
Sign in to view client's details.
| M****nir
|    Egypt
Fixed Price: Less than $500   |  Posted: 6h, 45m ago  |  Ends: 14d, 17h  |   12 Proposals
I plan to manufacture photo booths and would like some fabrication drawings done so I can have people quote on the construction of the booths. I have pictures of booths we would like to model and dimensions of structure etc
Category: Product Design       

G****ell
 [?]
Sign in to view client's details.
| G****ell
|    Singapore
Fixed Price: Not Sure   |  Posted: 12h, 42m ago  |  Ends: 14d, 11h  |   7 Proposals
I have a patent on a CEILING FAN product I created some years ago. I want to create a sleek, more refined prototype proving the concept. This is the Abstract of the Patent: A fan blade assembly having both an electrical connection and a mechanical connection to a rotating hub. The assembly is configured so that a single installation motion creates the mechanical connection and the electrical connection. The electrical connection preferably includes multiple independent conductor paths. You can find a link to the patent here:   [obscured]  /patents/US20110085908 The project is for the design/prototyping of a fully working ceiling fan with detachable electrical/mechanical blades with LED embedded.
Category: Product Design       

P****lly
 [?]
Sign in to view client's details.
| P****lly
|    United States
Fixed Price: Less than $500   |  Posted: 15h, 23m ago  |  Ends: 14d, 8h  |   2 Proposals
I looking to hire a software creator to create software to help internet marketers automate advertising on various sites. I want private label rights to resell the software. Contact me for more info. Regards, David O.
Category: Product Design       
Skills: .NET Framework       

C****012
 [?]
Sign in to view client's details.
| C****012
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 16h, 26m ago  |  Ends: 14d, 7h  |   19 Proposals
Hello, I'm currently looking for a designer that can help me turn my functional, rough prototype into an aesthetically pleasing working prototype that I can show to investors and potential customers. My product is an accessory to be used on children's car seats, strollers, etc. In the proposal please include your approach to this particular job, previous work experience/samples, and estimated time it will take to complete project. Please email me for any additional information or if you have any questions. I look forward to working with you! Thanks
Category: Product Design       

L****ard
 [?]
Sign in to view client's details.
| L****ard
|    United States
Fixed Price: Less than $500   |  Posted: 16h, 52m ago  |  Ends: 14d, 7h  |   2 Proposals
his is an individual assignment which comprises of four sections: 1) The first element is to conduct research into the geometry of a typical motorcycle suspension and specify a typical wheel diameter and sprung mass. These parameters will be used for your following tasks. 2) The second element of the task is to design a rising rate linkage mechanism that will permit at least 120 mm of rear wheel travel. The above figure can be used as a basis for your design. Your design should clearly show the joints you have chosen, and you should justify your choices. The linkage should be demonstrated in ADAMS model with wheel travel and raising spring rate. It is suggested that you investigate current motorcycle suspension linkages. 3) The third element of the task is to specify the springs and dampers. Your rates should be chosen to provide appropriate ride behaviour under an absolute bump limit (a vertical load equivalent to 3 m/s2). You may analyse it by varying your specified values. You may ...
Category: Mechanical       
Skills: msc adams       

m****lkj
 [?]
Sign in to view client's details.
| m****lkj
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 19h, 1m ago  |  Ends: 14d, 4h  |   3 Proposals
Need someone to do deformation analysis in Abaqus. I will provide the full meshed model. You just need to convert it to quarter model and run the job. Submit the input file and a short 2-3 page report containing screenshots of the results.
Category: Mechanical       
Skills: Mechanical Engineering, Abaqus, hypermesh       

h****23k
 [?]
Sign in to view client's details.
| h****23k
|    United States
Fixed Price: Less than $500   |  Posted: 19h, 38m ago  |  Ends: 14d, 4h  |   13 Proposals
Hello all, I need a drawing or two for my provisional patent on a new product (cup lid). I have sketches and drawings but I need to make sure it functions like I think it will. I will fill in the blanks once we have had a chance to speak and have a signed NDA in place. Thanks
Category: Product Design       
Skills: 3D Modeling, SolidWorks       
Preferred Location: United States

s****t67
 [?]
Sign in to view client's details.
| s****t67
Fixed Price: $100 - $200   |  Posted: 20h, 24m ago  |  Ends: 14d, 3h  |   9 Proposals
I will like a design with solidworks a ventilation radiator that has cylindrical fins with inlet and outlet. need to run CFD on it. i am looking for someone experienced with solidworks. any questions please ask
Category: CAD       
Skills: ANSYS, SolidWorks       

p****042
 [?]
Sign in to view client's details.
| p****042
|    United Kingdom
Fixed Price: $100 or less   |  Posted: 21h, 24m ago  |  Ends: 14d, 2h  |   9 Proposals
we have a little side project that we wanted to bring to life, we have the idea and a rough sketch but need someone to help design it. Its not a large project and it is very simple.
Category: Product Design       

a****xon
 [?]
Sign in to view client's details.
| a****xon
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 22h, 26m ago  |  Ends: 14d, 1h  |   5 Proposals
I have to come up with a simple 2d cad drawing to scale. I would like to use LibreCAD and have someone help me do it, so that I can learn the basic functions for changes that I may have to make later. Thank you
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

a****edo
 [?]
Sign in to view client's details.
| a****edo
|    United States
Fixed Price: Less than $500   |  Posted: 22h, 36m ago  |  Ends: 14d, 1h  |   38 Proposals
We have two floorplans which were hand drawn. They must be converted to a better looking pdf or jpeg file so they can be embedded into a marketing flyer. We have an additional 4 floorplans to be converted for the same property
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

M****ANI
 [?]
Sign in to view client's details.
| M****ANI
|    United States
Fixed Price: Less than $500   |  Posted: Mar 27, 2015  |  Closed  |   5 Proposals
The design for a plastic connector is required to join aluminum architectural profiles end to end. See attached pdf. REQUIREMENTS 1. CONNECTOR WILL BE TWO PIECES 2. EACH WILL BE PERMANENTLY FASTENED TO THE END OF THE PROFILE (INCLUDE FASTENING IN DESIGN) 3. SOME METHOD OF ALIGNMENT IS REQUIRED TO ENSURE ACCURATE MATING 4. SOME METHOD OF HOLDING THE CONNECTORS TOGETHER ONCE MATED IS REQUIRED - THIS SHOULD HOLD FAIRLY TIGHTLY. 5. WILL BE MADE ON A 3-D PRINTER 6. PREFERRED MATERIAL IS PLASTIC 7. THERE ARE NO WEIGHT CONSTRAINTS 8. THERE CAN BE NO INTERFERENCE WITH THE TOP INSIDE CHANNEL IN THE H-BEAM 9. NON-STRUCTURAL APPLICATION Vednor to supply source files and STL files.
Category: Product Design       

k****ds5
 [?]
Sign in to view client's details.
| k****ds5
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 27, 2015  |  Ends: 13d, 21h  |   22 Proposals
Our client is looking for a talented CAD designer for occasional work. The requirement is to create two drawings out of a handwritten plan our client creates while meeting up with a client. The first drawing is to be inserted into a sales presentation document and should be in sketch format. The next drawing is a detailed plan in AutoCAD, to be used on a construction site. The need is asap.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: North America

m****ner
 [?]
Sign in to view client's details.
| m****ner
|    Canada
Fixed Price: $500 - $1,000   |  Posted: Mar 27, 2015  |  Ends: 13d, 20h  |   6 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Nous recherchons un dessinateur 3D Solidworks pour une mission courte. Mission à rendre le 28 Février 2015.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Fixed Price: $500 - $1,000   |  Posted: Mar 27, 2015  |  Ends: 13d, 20h  |   2 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Cherchons un dessinateur pour la réalisation de plans techniques. A rendre le 31 Mars 2015.
Category: CAD       
Skills: AutoCAD, OrCAD, SolidWorks, 3D Design       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Fixed Price: $500 - $1,000   |  Posted: Mar 27, 2015  |  Ends: 13d, 20h  |   2 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Réalisation pour un client de plans de structures en aluminium. A rendre le 31/03/15.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 27, 2015  |  Ends: 13d, 20h  |   3 Proposals
S & S Engineering, Inc. is a MEP Engineering firm located out of Overland Park, KS. Established in 2004 by Santanu Nath, S & S is involved in numerous projects for around the city and state. Currently our engineers hold licenses in Kansas, Missouri, Ohio, Michigan, Illinois, Texas, and Mississippi. With a combined 75 years experience from our veteran staff, we drive to promote green technologies and sustainability. Our specialties are in commissioning, mechanical, plumbing, fire protection, energy efficiency, alternative energy, and control systems. S & S Engineering, Inc. seeks proactive, creative employees with excellent technical skills and a client-centered approach to join our team. The wide range of experience levels from our current team members and Principals allows new and veteran staff to share their knowledge of the MEP design field. S & S puts their focus on individual careers where, through training and mentoring, the leadership helps inspire staff...
Category: CAD       

m****irl
 [?]
Sign in to view client's details.
| m****irl
|    United States
Fixed Price: $500 - $1,000   |  Posted: Mar 27, 2015  |  Ends: 13d, 20h  |   2 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Réalisation pour un client de plans de structures en aluminium. A rendre le 31/03/15.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Hourly Rate: $40 - $50 / hr   |  Duration: 1-2 weeks  |  Posted: Mar 27, 2015  |  Ends: 13d, 20h  |   14 Proposals
Looking to patent my product. I need someone who can help draft a design or utility patent, including illustrations per USPTO requirements. Also need a 3D CAD verison of the product. Also looking for : Different concept designs for the product (Simply put a better version of what I currently have).
Category: Product Design       

c****asb
 [?]
Sign in to view client's details.
| c****asb
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 27, 2015  |  Ends: 13d, 19h  |   15 Proposals
I want this to be designed on a software, one piece item. It's simple, I have the sketch and I want it designed to I can get it manufactured. It's a bedsheet holder, made of flexible plastic. Is it possible to also have a prototype made, possibly by a 3D printer? Thanks.
Category: Product Design       
Skills: AutoCAD       

a****a22
 [?]
Sign in to view client's details.
| a****a22
|    Canada
Fixed Price: $1,000 - $5,000   |  Posted: Mar 27, 2015  |  Ends: 13d, 15h  |   16 Proposals
Chiropractor is developing rehabilitation equipment to aid in correcting posture problems.  This project focuses on developing a 3-D printed head harness. The head harness is for clinical use and needs to fit snugly on the patient's head to resist slippage while being comfortable enough to be worn for 20 ? 45 minutes at a time. Judgments are made about physical products based on their physical appearance. Even though this head harness is not a fashion accessory it shouldn't look scary or overly complicated to the user, a sporty look might be appropriate. Feel free to ask questions to clarify the goal of this project if needed before entering a bid.
Category: Product Design       
Preferred Location: North America

a****gns
 [?]
Sign in to view client's details.
| a****gns
|    Malaysia
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job