Save this Search
     
Sort by:
  • Posted Date
Posted: Within 7 days
Fixed Price: $100 - $300   |  Posted: 3h, 59m ago  |  Ends: 14d, 20h  |   0 Proposals
Parametric analysis of Solidworks flow simulation are to be carried-out using flow simulation API, the main idea is to edit already generated codes in VB 6.0 into VB.net or C++ (prefeably C++) , a plugin in terms of fluid codes (using codes already generated in C++ for navier-stokes momentum equation) should be embedded into the solidworks flow simulation environment), the VB 6 codes are able to do the following: 1. Change different impeller types used for the study 2. vary fluid height in the mixing vessel 3. Varying impeller rotational speed 4. Vary impeller distance from the bottom of the mixing vessel The plugin codes are written in C++, and its untended to be introduced into the mixing vessel as an external fluid and different results ar intended to be generated from the simulation that would determine which impeller gives better homogeneity and at what impeller distance this should be achieved. My system config and software : Win 8, 64 bit, solidworks 2015 and MS visual st...
Category: Mechanical       

p****geo
 [?]
Sign in to view client's details.
| p****geo *
|    Nigeria
Fixed Price: $1,000 - $5,000   |  Posted: 16h, 17m ago  |  Ends: 14d, 7h  |   6 Proposals
Hi, We need very specific device manufacturing (prototype + logic). Size of device must be not more then iBeacon (but here can be any server device), when some one near range of device (range is 2-3 metres), device must catch it (i mean identify it) and send signal to WiFi router or something else. Mobile Devise can be Android / IOS and we are not able to install any software to device. Probably you can catch BT or WiFi or any else signal from device. Share your budget. At first we need ~ 100 devices. Thanks!
Category: Product Design       

C****Ltd
 [?]
Sign in to view client's details.
| C****Ltd
|    Russia
Fixed Price: $100 - $250   |  Posted: 18h, 41m ago  |  Ends: 6d, 5h  |   3 Proposals
Will email details. Basic as below ? X-Y table with 2 step motors, 100mm x 100mm, move 2mm/revolution ? Controlled by step controller: 200 steps/revolution ? PLC: Allen-Bradley Micrologic 1400, 1766-L32BXB ? Program software: RSLogix 500, use PTO Input & Output Objects Input from HMI: ? 3-Positions, (X,Y), limit ±0.5-45mm (or ±50 - ±4500 steps) ? Buttons (5 on HMI): Position1 ? go to position (x1,y1) Position2 ? go to position (x2,y2) Position3 ? go to position (x3,y3) Stop - Home ? go to (0,0) Output on HMI: Display actual coordinate (x,y) Requirements: If x or y > 45 mm or <-45 mm, stop and send alarm; E-stop: stop X,Y and display actual coordinate (x,y) Target: Sample A-B PLC grogram (.RSS) for run.
Category: Product Design       
Skills: PLC & SCADA       

y****000
 [?]
Sign in to view client's details.
| y****000
|    United States
Fixed Price: Less than $500   |  Posted: 19h, 16m ago  |  Ends: 14d, 4h  |   6 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Réalisation pour un client de plans de structures en aluminium. A rendre le 31/08/15.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Fixed Price: Less than $500   |  Posted: 19h, 18m ago  |  Ends: 14d, 4h  |   3 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Cherchons un dessinateur pour la réalisation de plans techniques. A rendre le 31/08/15.
Category: CAD       
Skills: AutoCAD, OrCAD, SolidWorks, 3D Design       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Fixed Price: Less than $500   |  Posted: 19h, 22m ago  |  Ends: 14d, 4h  |   7 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Nous recherchons un dessinateur 3D Solidworks pour une mission courte. Mission à rendre le 31/08/15.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Fixed Price: Not Sure   |  Posted: Aug 28, 2015  |  Ends: 13d, 23h  |   8 Proposals
I will like a very good product designer than can create an innovative portable salon sink which can be easily carried around and doesn't take a lot of effort or time to setup before use. It has to be portable and lightweight, easy to setup, and is easily collapsible into a rollable case to make it easy for transport. The designs I have seen are harder to use for freelance stylists because 1) the sink takes some time to setup so has to have been setup prior to the client visit 2) once the sink is setup prior to the client visit, the product becomes bigger and harder to transport as it is now bulky 3) there is no case for the sink in its pre-setup of post-setup phase so there's no sleek/professional way for stylists to transport it into clients homes. The sink design should also factor in the need to retrieve water and to drain out water. The design of the sink, most particularly of the base of the sink, has to be innovative in order to overcome these challenges and so the product de...
Category: Product Design       

E****Bar
 [?]
Sign in to view client's details.
| E****Bar
Fixed Price: About $2,500   |  Posted: Aug 28, 2015  |  Ends: 16d, 13h  |   5 Proposals
We need a Radar system developed that is camera based. The project will require the freelancer to build a pan, tilt and zoom solution+ the detection and tracking software. Operational Specification 1)System scans the sky looking for planes (Any Kind) 2)Detect at least 10 planes at the same time 3)Assign Ids to all detected plane (  [obscured]  /watch?v=LNaL58GRou4) Something like this but for the planes. 4)Track the plane selected by the operator 5)The software needs to calculate the GPS location of the plane + altitude + Speed + Distance of the plane from the camera + expected path 6)The system will need to identify the planes by make and name 7)Have a traditional radar GUI + Show the plane( that is being tracked) on Google Maps 8)Detection range of 5Km 9)Required accuracy rate of +-10m
Category: Product Design       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    Canada
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Aug 27, 2015  |  Ends: 28d, 15h  |   8 Proposals
Looking to manufacture custom hardware, brass, zinc, stainless, aluminum, etc. will need samples and prototype quickly. Looking for top quality only, honest and reliable.
Category: Product Design       
Preferred Location: United States

P****ere
 [?]
Sign in to view client's details.
| P****ere
|    United States
Fixed Price: Less than $500   |  Posted: Aug 27, 2015  |  Ends: 13d, 8h  |   9 Proposals
A chemical coated yarn called black wick is to be wrapped with 10 mm width 18" white tissue. We need to design a mechanism that grips the black wick at both the ends, moves the tissue at 10 degree and grips it, twirls it, and grips the other end also. Attached video shows the manual process.
Category: Mechanical       

f****san
 [?]
Sign in to view client's details.
| f****san
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 27, 2015  |  Ends: 13d, 7h  |   23 Proposals
Hi, I have with me a PCB design created for me, but I wish to have an consultation with an expert on the design to ensure it is robust enough before I take it to the Gerber design stage. The design is for an Emergency light PCB control which will switch to battery mode when the supply has been cut. Let me know should you be interested and I shall revert with more details. I am fine on hourly rate, but I also wish to chat online and discuss to go thru any doubts. Thank you. Lee Han Pin
Category: Product Design       

H****pin
 [?]
Sign in to view client's details.
| H****pin
|    Singapore
Fixed Price: Not Sure   |  Posted: Aug 27, 2015  |  Ends: 13d, 4h  |   13 Proposals
Need to get a lay out design, architecture, 3D rendering done for a dental office project for a US client. Site CAD drawing available as input. Knowledge in US building codes required. Our client is in the process of remodeling/renovating an existing office (has rooms) to meet dental office requirements (need more rooms).We require 3D models of the proposed redesign/renovation and are also considering the possibility of creating a virtual tour feature that can be uploaded to our website. Prospective Freelancers would have to show competence in Architectural 3D modelling To give some idea on the scope of work 1. Building type: 3800 sf interior 2. No of rooms: 10 3. Toilets & Bath: 2 4. There will be structural changes inside to create more rooms. Deliverable: Models for each room, dental surgical rooms, LAB, sterilization, Dr Rooms Models for passages& corridors Models for reception, waiting lounge,staff lounge We will evaluate proposals based on the following 1) Qualificat...
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: India

k****gix
 [?]
Sign in to view client's details.
| k****gix *
|    United States
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: Aug 27, 2015  |  Ends: 12d, 18h  |   3 Proposals
Looking for the Hi-Fi Engineer to design an Audio Hi-Fi VU meter with the Following requirements: 9.1 Independent Analog Input Channels, RCA, XLR, Banana, Etc 9.1 Vu Meters/leds ( 1 per input ) Can use a DSP for Functions Like: Input Level, Input Detect: Peak, RMS Dimmer Response Speed. Your Job here will be to design the Electronic Part using from the shelf Components, write code is a plus. NDA and Contract will be required, If interested please send your information for NDA. Project design Price to be determined
Category: CAD       

e****ico
 [?]
Sign in to view client's details.
| e****ico *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 12d, 16h  |   21 Proposals
We need a drawing of a curved wireframe that we've already drawn in autocad 3d to be plotted onto approximately (30) PDF full size plots ready to be printed in 1:1 scale on 36" paper. We will give you an autocad file and we need each section of frame to be rotated into a plan view and an elevation view and plotted as a pdf. Please give us an hourly rate an an estimate per finished PDF plot. Thanks for bidding!
Category: CAD       
Skills: 3D Modeling, AutoCAD       

L****ive
 [?]
Sign in to view client's details.
| L****ive
|    United States
Fixed Price: $40 - $50   |  Posted: Aug 26, 2015  |  Ends: 12d, 14h  |   11 Proposals
I need mockups showing exact measurements and features of my cup designs. The final mock up files will need to be production ready. So i can just hand these files over to the manufacture. There will be two versions of this cup design. Both will be the same basic design, style and colors. The only difference in models will take place at the base of the cup. One will have a motor stir. The other will have a secret compartment. So to recap: I need two production sketches and 3d mock up of how the product will look for both versions. Examples of concept sketch:   [obscured]  /search?q=product+concept&espv=2&biw=1280&bih=658&source=lnms&tbm=isch&sa=X&ved=0CAYQ_AUoAWoVChMIp9e-s_LHxwIVCxSSCh2cgg7K#tbm=isch&q=product+concept+sketch Example of concept 3d rendering:   [obscured]  /search?q=product+concept&espv=2&biw=1280&bih=658&source=lnms&tbm=isch&sa=X&ved=0CAYQ_AUoAWoVChMIp9e-s_LHxwIVCxSSCh2cgg...
Category: Product Design       

v****man
 [?]
Sign in to view client's details.
| v****man
|    United States
Fixed Price: Not Sure   |  Posted: Aug 26, 2015  |  Ends: 12d, 13h  |   14 Proposals
I need someone who can make for me a 3D model of an idea i have. I need whatever is needed in order to start a patent and manufacturing. i have attached a basic sketch of what the design should resemble.
Category: Product Design       

t****093
 [?]
Sign in to view client's details.
| t****093 *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 12d, 12h  |   7 Proposals
Start-up company needing services from ideation to production for a beach sandal company. Currently in the initial stages of the process. The beach sandal company will strive to be eco-friendly but fashion forward. We would like to utilize recycled products.
Category: Product Design       

j****v10
 [?]
Sign in to view client's details.
| j****v10
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 12d, 12h  |   1 Proposal
Start-up company needing services from ideation to production for a beach sandal company. Currently in the initial stages of the process. The beach sandal company will strive to be eco-friendly but fashion forward. We would like to utilize recycled products. We are looking to hire someone that has expertise in finding a manufacturer that fits our needs. We would like to manufacture in the USA.
Category: Product Design       

j****v10
 [?]
Sign in to view client's details.
| j****v10
|    United States
Fixed Price: Less than $500   |  Posted: Aug 26, 2015  |  Ends: 4d, 7h  |   14 Proposals
We have a camera / scanner that we use in the manufacturing. We need to mount an air nozzle to it to protect the face from the environmental I have attached a sketch in powerpoint as well as the cad of the air nozzle. we are looking for mechanical services for some updates to the retention of the scanner and the air knife retention to the scanner.
Category: Mechanical       

I****ual
 [?]
Sign in to view client's details.
| I****ual
Fixed Price: $80 - $130   |  Posted: Aug 26, 2015  |  Ends: 12d, 6h  |   2 Proposals
Coding and numerical simulation using ABAQUS and UMAT Need numerical simulation working experience for this kind of work. See the attached paper for the overview of the work.
Category: Mechanical       

m****d90
 [?]
Sign in to view client's details.
| m****d90
|    Germany
Fixed Price: Less than $500   |  Posted: Aug 26, 2015  |  Ends: 12d, 4h  |   1 Proposal
The project is to manufacture; 1. a 2cmx10cm transmitter device which needs to transmit a basic signal over the range of up to 200 meters with a built in battery. The battery life could be anything from at least one hour. 2. two sets of receivers which will be placed 50 to 100 meters apart from one another to a fixed location. The receivers -by using the signal from the transmitter- has to calculate the distance between themselves and the transmitter with x,y,z coordinates using, themselves as two fixed reference points. The receivers should have a flashing red LED to indicate if and when the transmitter is 100 meters away from the receivers horizontally (y axis) and 10/15 meters away from the horizon vertically (x axis) The transmitter should have a button to voluntarily activate the red LED lights on the receivers. These products must be manufactured and dispatched to me ASAP. The payment method will be discussed.
Category: Product Design       

m****ren
 [?]
Sign in to view client's details.
| m****ren
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Aug 26, 2015  |  Ends: 12d, 0h  |   6 Proposals
We are looking for a electronics designer with experience in laying out capacitive touch sensors, specifically touch sensors etched on clear film (ITO, HCF, etc.). We have the design rules and basic mechanical envelope (including an example larger display) that we need to layout for fabrication. Selected candidate will have own tools (please provide name) and create the necessary Gerber files. We can provide examples and would look for an example layout and Gerber.
Category: CAD       
Preferred Location: North America

r****ssi
 [?]
Sign in to view client's details.
| r****ssi
|    United States
Hourly Rate: $40 - $50 / hr   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 11d, 21h  |   16 Proposals
Need a Civil Engineer or Land Surveyor who can provide simple corrections on the parcel "Final Map" er Town of Mammoth Lakes Surveyor "Comments" and who can later sign the map before is recorded.
Category: CAD       
Skills: Engineering drawing       
Preferred Location: United States

O****aLA
 [?]
Sign in to view client's details.
| O****aLA
|    United States
Fixed Price: Not Sure   |  Posted: Aug 25, 2015  |  Ends: 11d, 8h  |   30 Proposals
I need an multifunctional iPhone 6 case designed/innovated to be presented as a final prototype. I have already had the design initially created, I want to improve it.
Category: Product Design       

l****do6
 [?]
Sign in to view client's details.
| l****do6
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job