Save this Search
     
Sort by:
  • Posted Date
Payment Verified
Fixed Price: Not Sure   |  Posted: 35 minutes ago  |  Ends: 6d, 23h  |   4 Proposals
The job consists of 3D design of pill bottle, cap, and an internal part for printing. Example model can be provided and explained more in depth to the awarded freelancer. An example model will be provided for show of concept and the completed model provides no complexity, just step by step height and width of cap, bottle, and internal part. The overall thickness of the parts will be no less than 2mm for printing purposes. Thanks for your consideration,
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

s****don
 [?]
Sign in to view client's details.
| s****don
|    United States
Fixed Price: Less than $500   |  Posted: 46 minutes ago  |  Ends: 14d, 23h  |   1 Proposal
This job is to take 8 .STL files from a 3D scanner and clean up the imperfections from those scans into 4 .STL files. The files are from the scan of the front and back of a sheet metal stamping. What I want to do is combine the front and back with the known sheet metal thickness into a single .STL file. The sheet metal is flat and I want the letters to be consistent and uniform. I am looking to have 2 of these done ASAP. (The WILLYS ones in the example.)
Category: Product Design       

a****eep
 [?]
Sign in to view client's details.
| a****eep
|    United States
Fixed Price: Less than $500   |  Posted: 3h, 58m ago  |  Ends: 14d, 20h  |   10 Proposals
JOB SCOPE: MINOR REVISIONS MADE TO CAD FILES SEE ATTACHED FOR PLANS WITH REVISIONS **PAY of $30 includes ALL notes and changes** Thanks, Heather
Category: CAD       

t****yer
 [?]
Sign in to view client's details.
| t****yer
|    United States
Hourly Rate: $5 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: 4h, 55m ago  |  Ends: 14d, 19h  |   9 Proposals
I am looking for an industrial designer to make a photo realistic prototype of a product in the consumer product space. I am looking for 2 separate designs one is integrated into an existing product the other is an add on product. I am looking for a finished product drawing as well as a blow out that shows the working parts.I will most likely need a sell sheet as well. If this moves to manufacturing then I would come back to hire the designer for full CAD's and specs.
Category: Product Design       
Skills: Autodesk Inventor, AutoCAD, SolidWorks, Autodesk       

c****d26
 [?]
Sign in to view client's details.
| c****d26
|    United States
Fixed Price: Not Sure   |  Posted: 9h, 17m ago  |  Ends: 14d, 14h  |   10 Proposals
Hello, Looking for someone to help me source a product like this one. Here are the requirements: High quality fabric, thick and strong. Also pre-shrunk. Thick draw strings Fabric draw string locks Metal eyelets to hold strings Custom screen printing The dimensions of the laundry bag are 25" x 22" x 8." Shoulder straps to hold bag This is a great example:   [obscured]  /s/files/1/0058/2682/products/LaundryBagAnatomyHiRes.jpg?v=1353274310
Category: Product Design       

a****009
 [?]
Sign in to view client's details.
| a****009
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: 11h, 29m ago  |  Ends: 14d, 12h  |   13 Proposals
I have a product design that needs a CAD and Render. Let's start with just the CAD. This product is a heater for cell phones in cold climates. I have attached a PDF of a hand drawing to help you visualize. It will have an integrated battery, switch, and heater plate that is completely independent of the cell phone. It should meet the following requirements: - Case should snap over the phone (It doesn't have to be perfect, but please make sure the CAD can be tweaked) - Case should house a thin aluminum plate that will be crafted as the heater plate - Case should house a small lithium ion battery (dimensions provided) Once the CAD is done, if you can do a render within the given budget, go ahead and do that. The case will be 3D printed, so if you have any knowledge of that, it should help. Otherwise, all you have to do is minimize fine detail, and reduce overhangs. In this case, the overhang to allow the case to hold the phone is fine.
Category: CAD       

w****sjg
 [?]
Sign in to view client's details.
| w****sjg
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 11h, 31m ago  |  Ends: 14d, 12h  |   16 Proposals
We have Autocad Drawings in 2D, and are reading to convert our drawing sets into AutoDesk Inventor. I am looking for someone who can take these drawings and convert on an hourly quoted basis. Let me know your hourly rate and I will send drawings to be quoted.
Category: CAD       
Skills: Autodesk Inventor, AutoCAD       

B****tCo
 [?]
Sign in to view client's details.
| B****tCo
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 13h, 23m ago  |  Ends: 14d, 10h  |   10 Proposals
a plastic funnel which has threads at both ends, allowing two plastic containers to be joined and consolidate contents into one container.
Category: Product Design       

T****969
 [?]
Sign in to view client's details.
| T****969
|    United States
Fixed Price: $500 - $1,000   |  Posted: 13h, 23m ago  |  Ends: 14d, 10h  |   7 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Nous recherchons un dessinateur 3D Solidworks pour une mission courte. Mission à rendre le 30/07/15.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Fixed Price: $500 - $1,000   |  Posted: 13h, 24m ago  |  Ends: 14d, 10h  |   3 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Cherchons un dessinateur pour la réalisation de plans techniques. A rendre le 30/07/15.
Category: CAD       
Skills: AutoCAD, OrCAD, SolidWorks, 3D Design       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Fixed Price: $500 - $1,000   |  Posted: 13h, 45m ago  |  Ends: 14d, 10h  |   5 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Réalisation pour un client de plans de structures en aluminium. A rendre le 30/07/15.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: 13h, 53m ago  |  Ends: 14d, 10h  |   6 Proposals
Hi I am currently looking at property in Bocas Del Toro, Panama. I have received a property map with Survey coordinates and would like them to be put on to google maps or Earth for me. I have no experience in Surveys or Google Maps but I have read forums which say this is a pretty straightforward process. the property Map has 44 Survey points and has a reference WGS 84 Zona # 17 P if that helps. Copy of map attached I don't know how much something like this would cost so please feel free to contact me if my expectations are unrealistic. Thanks in advance Jeremy Ball
Category: Other - Engineering &...       

J****127
 [?]
Sign in to view client's details.
| J****127
|    United Kingdom
Fixed Price: $1,000 - $5,000   |  Posted: 15h, 38m ago  |  Ends: 59d, 8h  |   13 Proposals
Hello, I'm currently adding to a robot prototype I have, and would like to work with someone who has experience in working with manufactured products. Ideally you are a mechanical/electrical engineer or an industrial designer that would either help with the internal electronics and motors or a designer who will help with materials and 3D designs that are ready for manufacturing. The things I have already worked out are: - The way the robot navigates - Self balancing on ball (see picture) - Dimensions The things I need work on: - A way to interact with the robot - Developing the arms to fit the design - Work with parts (micro processor and such) to help when it comes to manufacturing
Category: Product Design       

s****awy
 [?]
Sign in to view client's details.
| s****awy
|    Canada
Fixed Price: Not Sure   |  Posted: 19h, 36m ago  |  Ends: 14d, 4h  |   16 Proposals
Hi, we have a prototype UAV that we have built and we would now like to take it further and make it look tidier and nicer. We would like to make the aircraft out of composites, in molds. This requires that we have stl files for those molds. Also we would like to enhance the design, look into details, change things around etc. All this requires as first step that we have a full working computer model of the aircraft. There are a few moving parts (e.g. the tail surfaces, propellers, landing gear retract) but it is not a huge amount of moving things. We have relatively accurate measurements and even a physical 'model' although it is not that nice, at least it can be looked at to get a rough idea. Created files should be viewable and be able to be manipulated in Autodesk inventor, because we have this program and it would be easier if both you and we could fully view the file, turn it around, assemble and disassemble the model, make measurements, etc. We would prefer a fixed pric...
Category: CAD       

S****DDG
 [?]
Sign in to view client's details.
| S****DDG
|    Singapore
Fixed Price: $80 - $150   |  Posted: Jul 26, 2015  |  Ends: 1d, 21h  |   12 Proposals
I'm looking for someone with electrical, mechanical and plumbing knowledge to provide electrical, mechanical and plumbing plans for my simple one-story tenant improvement project. I will send you proposed floor plan and equipment plan to be used as a base plan for Mechanical and Plumbing Plan. The project is in State of California, USA. The design are to be per CBC 2013 (2012 IBC with amendments), 2013 CMC (2012 UMC with amendments), 2013 CEC (2011 NEC with amendments), and 2013 CPC (2012 UPC with amendments). So I need someone with the code knowledge. Electrical: I have base plan and general notes with legend for electrical but it needs to be reviewed, enhanced as necessary, and finalized. Mechanical HVAC: There are two AC units available as shown on attached plan. Proposed ceiling diffusers are shown on plan but can be modified if needed. Notes, legends, and details are on there from previous project that you can refer to. Sample mechanical plan for previous project is attached....
Category: CAD       

W****ile
 [?]
Sign in to view client's details.
| W****ile
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Jul 26, 2015  |  Ends: 13d, 20h  |   5 Proposals
Provide engineering calculations for a range of light gauge steel structures. Calculations must comply with relevant Australian Standards. Calculations will be based on utilizing existing metal connections and components available in the Australian market. Schematic drawings of structures will be supplied by owner. Initial design range includes 14 different structure sizes. Owner will work with successful tenderer,providing support and design information based on 35 years of industry experience. only Engineers experienced with light gauge cold formed steel structures should apply.( AS/NZS 4600:200 Cold-formed steel structures)
Category: Civil & Structural       

R****ldu
 [?]
Sign in to view client's details.
| R****ldu
|    Australia
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Jul 26, 2015  |  Ends: 13d, 17h  |   0 Proposals
I am looking for someone to formulate a organic beverage made with Organic Golden Monkey Tea, organic pure sugar cane and purified water. I have a sample of a competitor's tea that I can provide to you. My goal is to create a better tasting or similar tea.
Category: Product Design       

M****BOY
 [?]
Sign in to view client's details.
| M****BOY
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 26, 2015  |  Ends: 13d, 17h  |   4 Proposals
I'm looking for a organic chemist or organic scientist to create an organic peanut lip balm. The product should protect dry lips, lip irritation and to help prevent sunburn while providing moisturizing lip care.
Category: Other - Engineering &...       

M****BOY
 [?]
Sign in to view client's details.
| M****BOY
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jul 26, 2015  |  Ends: 1d, 17h  |   1 Proposal
An array of buttons to read the Arabic alphabet when pressed. Voice quality needs to be clear. Suitable hardware/software technologies to be adopted for small sized application with low power usage (low voltage). Text to speech function needed when selecting more than one button to read the complete Arabic word.
Category: Product Design       

n****345
 [?]
Sign in to view client's details.
| n****345
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Jul 26, 2015  |  Ends: 5d, 16h  |   4 Proposals
Need a seasoned professor or experienced senior geotechnical engineer to write a 50 to 60 page Word(R) file on the following twelve topics: 1- Active earth pressure using Coulomb theory. Should included inclined backfill, wall friction and wall inclination considerations. 2- At Rest earth pressure using Jaky's equation with consideration for OC ratio and inclined backfill. 3- Passive resistance using Coulomb theory. Should included descending slopes, cohesion, slope creep, wall friction and wall inclination considerations. 4- Effect of tiered retaining walls. 5-Effect of adjacent surcharges. 6- Analysis method for ascending backfill slope angle exceeding soil friction angle. 7- Global stability analysis using Spencer method. 8- Analysis & effect of keyway. 9- Effect of stratified or layered soils. 10- Effect of relieving platform. 11- Effect of expansive soils backfill. 12- Effect of seismic earth pressure. I just don't have the time to do it. It will be used for seminars and in...
Category: Civil & Structural       

L****000
 [?]
Sign in to view client's details.
| L****000
|    United States
Fixed Price: Not Sure   |  Posted: Jul 26, 2015  |  Ends: 1d, 13h  |   13 Proposals
The job is to calculate the amount of air (m³/h) and the pressure (Pa) required to cool down a box with a sensor inside and to advise in case optimization is required. Details: 1. The box housing with the sensor inside is modelled in 3D with Solidworks. The Solidworks model will is attached. 2. The box is having a ceramic plate at the bottom and the rest is made from aluminium. 3. All holes seen in the box will be closed with bolts, apart from the socket at the top for the cooling air inlet and the row of holes at the back for escaping of the cooling air. The row at the back can be adjusted for more or less holes, as per the best air flow. The size of the inlet nozzle can also be adjusted as per flow requirements. 4. The cooling air temperature is 48°C. 5. The maximum temperature inside the box shall be 80°C. 6. The surrounding temperature is 200°C 7. Below the 7mm thick ceramic plate a piece of material is constantly touch with 450°C temperature. So, we require someone who i...
Category: Other - Engineering &...       

A****any
 [?]
Sign in to view client's details.
| A****any
|    Germany
Fixed Price: $500 - $1,000   |  Posted: Jul 26, 2015  |  Ends: 13d, 11h  |   4 Proposals
Hello We need a few data scientist to work on assignment basis for our start up. Please send across your profiles. We need data scientist to build predictive analytics model for our upcoming project. Thanks Hemal
Category: Other - Engineering &...       
Skills: Scientific Computation       

h****com
 [?]
Sign in to view client's details.
| h****com
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 26, 2015  |  Ends: 13d, 9h  |   4 Proposals
We are a product development company and need to source a reliable supplier of a specific stretchable headband. The band we are interested in has a soft, highly stretchable rubber core and sheathed in print fabric. The band expands about 300%. We require a very specific width to the rubber core. It must be 14mm wide. Looking for a suitable supply agent who can source quotes for a variety of high visibility, colorful print styles. Attached Youtube video shows an existing, common 10mm wide hair band. We need 14mm wide.   [obscured]  /watch?v=uuDES-M8t9o&feature=youtube_gdata
Category: Product Design       

p****son
 [?]
Sign in to view client's details.
| p****son
|    Bermuda
Fixed Price: Less than $500   |  Posted: Jul 26, 2015  |  Ends: 3d, 8h  |   3 Proposals
Nonlinear wheel angular acceleration- spin-up. To find slip distance (relexation length) or time. Description will send direct to freelancer.
Category: Other - Engineering &...       
Skills: Mechanical Engineering, Mathematics, Physics       

a****att
 [?]
Sign in to view client's details.
| a****att
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Jul 26, 2015  |  Ends: 5d, 7h  |   3 Proposals
I need a tutor in topology to help me in to understand some mathematical problems in topology I need a tutor in topology to help me in to understand some mathematical problems in topology I need a tutor in topology to help me in to understand some mathematical problems in topology I need a tutor in topology to help me in to understand some mathematical problems in topology
Category: Other - Engineering &...       
Skills: Mathematics       

m****lab
 [?]
Sign in to view client's details.
| m****lab
|    Jordan
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job