Save this Search
     
Sort by:
  • Posted Date
Hiring Open
Fixed Price: Not Sure   |  Posted: 6h, 42m ago  |  Ends: 1d, 17h  |   7 Proposals
We are looking for assistance in creating a design for a new watch case product . The case should have 3 main components inside of it: watch docking station, battery/charger cable area and a location for the watch itself. The docking station should be able to open and fold within the case itself. We have more details regarding this case for the Provider that gets awarded this job. We also have a case that we like that can serve as a basis for the design of our new case although our case has different look and functionality. We also have a rough schematic for this new case for the Provider to review.
Category: Product Design       

j****man
 [?]
Sign in to view client's details.
| j****man
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 11h, 13m ago  |  Ends: 14d, 12h  |   7 Proposals
We have customers that will want a shoe shine. They will sit on one of those chairs to have a shoe shine. Each treatment is about 10-15 min. There will also be a camera on top of the chair. At the end of the treatment (shoe shine), the customer will pay the operator who did the shoe shine for him. We will ask the operator to key in in the store system the transaction and issue a ticket At the end of the day, to cross check that the operator did not do any treatment without declaring it (ie stealing), we will cross check number of transactions entered in the store system (that issued at ticket), the number of times the seat has detected we had a customer for treatment, and the number of customers detected via the camera. We are looking at an electronic application that can 1) Count the number of customers who spent more than 5min on a seat 2) Detect from the camera images the number of customers who had the service during the day 3) Notify the store owner if any discrep...
Category: Other - Engineering &...       

l****che
 [?]
Sign in to view client's details.
| l****che
|    United Arab Emirates
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 14h, 6m ago  |  Ends: 14d, 9h  |   10 Proposals
Hi, I have with me a PCB design created for me, but I wish to have an consultation with an expert on the design to ensure it is robust enough before I take it to the Gerber design stage. The design is for an Emergency light PCB control which will switch to battery mode when the supply has been cut. Let me know should you be interested and I shall revert with more details. I am fine on hourly rate, but I also wish to chat online and discuss to go thru any doubts. Thank you. Lee Han Pin
Category: Product Design       
Skills: Manufacturing Design, Electronics       

H****pin
 [?]
Sign in to view client's details.
| H****pin
|    Singapore
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: 20h, 17m ago  |  Ends: 59d, 3h  |   3 Proposals
Task: I am looking to design a foldable yoga mat. The shape of the yoga mat has to be rectangular. The product: on one side there is the mat and on the other there will be a fabric coat that once, folded will serve as the outside of a bag. Prefer: beautiful design and compactness. Could you do three different models, one with beautiful design, one that is compact and one that has both elements? Mat material: TBA (100% natural rubber, PVC etc.) Please let me know if you have any questions and reply to confirm the receipt of this e-mail. This assignment should not take more than 45 minutes- 1 hr.
Category: Product Design       

s****er1
 [?]
Sign in to view client's details.
| s****er1 *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 23h, 52m ago  |  Ends: 14d, 0h  |   9 Proposals
Design a simple farm produce sorting machine. I have already built a rough prototype, but now need a properly engineered, and built machine, for showmanship purposes. The machine is all mechanical expect for some electrical motors.
Category: Product Design       
Preferred Location: Canada

M****y11
 [?]
Sign in to view client's details.
| M****y11
|    Canada
Fixed Price: Not Sure   |  Posted: Aug 29, 2015  |  Ends: 1d, 22h  |   2 Proposals
I have 4 Concurrency Systems Problems: serialisability I need someone expert to solve these questions due: 2 septemer
Category: Other - Engineering &...       

M****009
 [?]
Sign in to view client's details.
| M****009
|    Saudi Arabia
Fixed Price: Not Sure   |  Posted: Aug 29, 2015  |  Ends: 13d, 18h  |   5 Proposals
We are implemeting CAD Standards in our studio. We currently have AutoCAD LT, and need to streamline toggling layer states for working on our architectural plans. In my previous firm, we had a full AutoCAD license, and had a Macro/ Lisp custom toolbar ribbon that we loaded for customization. My understanding is that this is not possible with the LT version and am researching what the best alternative is. We currently create Layer States for individual projects which is time consuming and inefficient in a growing studio and are open to any proposed solution similar to a custom ribbon. We can provide a spreadsheet and a CAD drawing that identifies all layers. The spreadsheet will also identify which layers should be turned on or off depending on which plan we would be working on. We would also need to lock all off layers in order to enforce standards. We will need to have separate layer states for the following plans. - Construction Plan - Reflected Ceiling Plan - Electrical Plan - ...
Category: CAD       
Skills: AutoCAD       

m****dsi
 [?]
Sign in to view client's details.
| m****dsi
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Aug 28, 2015  |  Ends: 12d, 18h  |   7 Proposals
Hi, We need very specific device manufacturing (prototype + logic). Size of device must be not more then iBeacon (but here can be any server device), when some one near range of device (range is 2-3 metres), device must catch it (i mean identify it) and send signal to WiFi router or something else. Mobile Devise can be Android / IOS and we are not able to install any software to device. Probably you can catch BT or WiFi or any else signal from device. Share your budget. At first we need ~ 100 devices. Thanks!
Category: Product Design       

C****Ltd
 [?]
Sign in to view client's details.
| C****Ltd
|    Russia
Fixed Price: $100 - $250   |  Posted: Aug 28, 2015  |  Ends: 4d, 15h  |   4 Proposals
Will email details. Basic as below ? X-Y table with 2 step motors, 100mm x 100mm, move 2mm/revolution ? Controlled by step controller: 200 steps/revolution ? PLC: Allen-Bradley Micrologic 1400, 1766-L32BXB ? Program software: RSLogix 500, use PTO Input & Output Objects Input from HMI: ? 3-Positions, (X,Y), limit ±0.5-45mm (or ±50 - ±4500 steps) ? Buttons (5 on HMI): Position1 ? go to position (x1,y1) Position2 ? go to position (x2,y2) Position3 ? go to position (x3,y3) Stop - Home ? go to (0,0) Output on HMI: Display actual coordinate (x,y) Limit conditions: If x or y > 45 mm or <-45 mm, stop and send alarm; E-stop: stop X,Y and display actual coordinate (x,y) Target: Sample A-B PLC grogram (.RSS) for run. Requirement: have to use A-B RSLogix 500 software to make the sample program.
Category: Product Design       
Skills: PLC & SCADA, RSLogix 500       

y****000
 [?]
Sign in to view client's details.
| y****000
|    United States
Fixed Price: Less than $500   |  Posted: Aug 28, 2015  |  Ends: 12d, 15h  |   8 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Réalisation pour un client de plans de structures en aluminium. A rendre le 31/08/15.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Fixed Price: Less than $500   |  Posted: Aug 28, 2015  |  Ends: 12d, 15h  |   3 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Cherchons un dessinateur pour la réalisation de plans techniques. A rendre le 31/08/15.
Category: CAD       
Skills: AutoCAD, OrCAD, SolidWorks, 3D Design       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Fixed Price: Less than $500   |  Posted: Aug 28, 2015  |  Ends: 12d, 15h  |   7 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Nous recherchons un dessinateur 3D Solidworks pour une mission courte. Mission à rendre le 31/08/15.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Fixed Price: Not Sure   |  Posted: Aug 28, 2015  |  Ends: 12d, 10h  |   11 Proposals
I will like a very good product designer than can create an innovative portable salon sink which can be easily carried around and doesn't take a lot of effort or time to setup before use. It has to be portable and lightweight, easy to setup, and is easily collapsible into a rollable case to make it easy for transport. The designs I have seen are harder to use for freelance stylists because 1) the sink takes some time to setup so has to have been setup prior to the client visit 2) once the sink is setup prior to the client visit, the product becomes bigger and harder to transport as it is now bulky 3) there is no case for the sink in its pre-setup of post-setup phase so there's no sleek/professional way for stylists to transport it into clients homes. The sink design should also factor in the need to retrieve water and to drain out water. The design of the sink, most particularly of the base of the sink, has to be innovative in order to overcome these challenges and so the product de...
Category: Product Design       

E****Bar
 [?]
Sign in to view client's details.
| E****Bar
Fixed Price: About $2,500   |  Posted: Aug 28, 2015  |  Ends: 14d, 23h  |   6 Proposals
We need a Radar system developed that is camera based. The project will require the freelancer to build a pan, tilt and zoom solution+ the detection and tracking software. Operational Specification 1)System scans the sky looking for planes (Any Kind) 2)Detect at least 10 planes at the same time 3)Assign Ids to all detected plane (  [obscured]  /watch?v=LNaL58GRou4) Something like this but for the planes. 4)Track the plane selected by the operator 5)The software needs to calculate the GPS location of the plane + altitude + Speed + Distance of the plane from the camera + expected path 6)The system will need to identify the planes by make and name 7)Have a traditional radar GUI + Show the plane( that is being tracked) on Google Maps 8)Detection range of 5Km 9)Required accuracy rate of +-10m
Category: Product Design       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    Canada
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Aug 27, 2015  |  Ends: 27d, 1h  |   9 Proposals
Looking to manufacture custom hardware, brass, zinc, stainless, aluminum, etc. will need samples and prototype quickly. Looking for top quality only, honest and reliable.
Category: Product Design       
Preferred Location: United States

P****ere
 [?]
Sign in to view client's details.
| P****ere
|    United States
Fixed Price: $5,000 - $10,000   |  Posted: Aug 27, 2015  |  Ends: 26d, 21h  |   17 Proposals
We need someone, or a group of people to put together a product by hand. These need to be mass produced a few times a year.
Category: Other - Engineering &...       
Preferred Location: United States

V****orp
 [?]
Sign in to view client's details.
| V****orp
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 27, 2015  |  Ends: 11d, 17h  |   24 Proposals
Hi, I have with me a PCB design created for me, but I wish to have an consultation with an expert on the design to ensure it is robust enough before I take it to the Gerber design stage. The design is for an Emergency light PCB control which will switch to battery mode when the supply has been cut. Let me know should you be interested and I shall revert with more details. I am fine on hourly rate, but I also wish to chat online and discuss to go thru any doubts. Thank you. Lee Han Pin
Category: Product Design       
Skills: Manufacturing Design, Electronics       

H****pin
 [?]
Sign in to view client's details.
| H****pin
|    Singapore
Fixed Price: Not Sure   |  Posted: Aug 27, 2015  |  Ends: 11d, 15h  |   13 Proposals
Need to get a lay out design, architecture, 3D rendering done for a dental office project for a US client. Site CAD drawing available as input. Knowledge in US building codes required. Our client is in the process of remodeling/renovating an existing office (has rooms) to meet dental office requirements (need more rooms).We require 3D models of the proposed redesign/renovation and are also considering the possibility of creating a virtual tour feature that can be uploaded to our website. Prospective Freelancers would have to show competence in Architectural 3D modelling To give some idea on the scope of work 1. Building type: 3800 sf interior 2. No of rooms: 10 3. Toilets & Bath: 2 4. There will be structural changes inside to create more rooms. Deliverable: Models for each room, dental surgical rooms, LAB, sterilization, Dr Rooms Models for passages& corridors Models for reception, waiting lounge,staff lounge We will evaluate proposals based on the following 1) Qualificat...
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: India

k****gix
 [?]
Sign in to view client's details.
| k****gix *
|    United States
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: Aug 27, 2015  |  Ends: 11d, 5h  |   3 Proposals
Looking for the Hi-Fi Engineer to design an Audio Hi-Fi VU meter with the Following requirements: 9.1 Independent Analog Input Channels, RCA, XLR, Banana, Etc 9.1 Vu Meters/leds ( 1 per input ) Can use a DSP for Functions Like: Input Level, Input Detect: Peak, RMS Dimmer Response Speed. Your Job here will be to design the Electronic Part using from the shelf Components, write code is a plus. NDA and Contract will be required, If interested please send your information for NDA. Project design Price to be determined
Category: CAD       

e****ico
 [?]
Sign in to view client's details.
| e****ico *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 11d, 3h  |   22 Proposals
We need a drawing of a curved wireframe that we've already drawn in autocad 3d to be plotted onto approximately (30) PDF full size plots ready to be printed in 1:1 scale on 36" paper. We will give you an autocad file and we need each section of frame to be rotated into a plan view and an elevation view and plotted as a pdf. Please give us an hourly rate an an estimate per finished PDF plot. Thanks for bidding!
Category: CAD       
Skills: 3D Modeling, AutoCAD       

L****ive
 [?]
Sign in to view client's details.
| L****ive
|    United States
Fixed Price: Not Sure   |  Posted: Aug 26, 2015  |  Ends: 10d, 23h  |   18 Proposals
I need someone who can make for me a 3D model of an idea i have. I need whatever is needed in order to start a patent and manufacturing. i have attached a basic sketch of what the design should resemble.
Category: Product Design       

t****093
 [?]
Sign in to view client's details.
| t****093 *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 10d, 23h  |   2 Proposals
Start-up company needing services from ideation to production for a beach sandal company. Currently in the initial stages of the process. The beach sandal company will strive to be eco-friendly but fashion forward. We would like to utilize recycled products. We are looking to hire someone that has expertise in finding a manufacturer that fits our needs. We would like to manufacture in the USA.
Category: Product Design       

j****v10
 [?]
Sign in to view client's details.
| j****v10
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 25d, 22h  |   1 Proposal
We are seeking an individual in Myanmar with a broad knowledge of the business and regulatory landscape across multiple industries (including apparel/footwear manufacturing and IT among others) to serve in a strategic consulting role. Priority will be given to local citizens though highly qualified expats are also encouraged to apply. This is an initial general call to gauge the type of experience candidates can bring to the table. We will contact qualified candidates with more information.
Category: Other - Engineering &...       
Skills: Contract Manufacturing       
Preferred Location: Myanmar

C****sia
 [?]
Sign in to view client's details.
| C****sia *
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Aug 26, 2015  |  Ends: 10d, 20h  |   3 Proposals
Require a project/experiment to be done in human head pose estimation, with kinect camera Using c++/opencv. Estimate the pitch/yaw/roll and perhaps display it. Any one related to computer vision welcome.
Category: Other - Engineering &...       
Skills: C++, OpenCV, Computer vision, Image Processing, Kinect       

k****akr
 [?]
Sign in to view client's details.
| k****akr
|    Ireland
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job