Save this Search
     
Sort by:
  • Posted Date
Posted: Within 3 days
Fixed Price: Less than $500   |  Posted: 32 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
Hello, I need a generic obd interface (hardware + plus software) , which can gather all available information provided by the machine and provide it as an xml. The hardware can be configured to monitor certain parameters like - car speed, car pollution efficiency (via some mechanism), braking or zig zag driving. and store this value and when required push it via obd cable (or wifi) based on configuration.
Category: Product Design       
Skills: Electronics, Embedded System, OBD Interface       

S****Vai
 [?]
Sign in to view client's details.
| S****Vai
|    India
Fixed Price: $500 - $1,000   |  Posted: 57 minutes ago  |  Ends: 14d, 23h  |   1 Proposal
Hello, I need help in designing a prototype for water flow meter. (which can be then updated be measure gas too). Following functionalities are required a) Minimum battery consumption b) Tell volume flow in literes in last x minutes , and should store last n readings. c) On request or or automatic convey the information via ipnetwork to a machine.
Category: Product Design       

S****Vai
 [?]
Sign in to view client's details.
| S****Vai
|    India
Fixed Price: Less than $500   |  Posted: 1h, 7m ago  |  Ends: 14d, 22h  |   6 Proposals
I want to have someone design a coffee table for me. I want it to be primarily black. It has to be made with wood and plastic for an affordable design. I also want it to have hidden storage like the attached examples. However, I want cupholders, a hidden magazine rack, remote holders, and it has to be assembled easily at home. I only want designers with previous experience in furniture design.
Category: Product Design       

M****030
 [?]
Sign in to view client's details.
| M****030 *
|    United States
Fixed Price: Not Sure   |  Posted: 1h, 24m ago  |  Ends: 14d, 22h  |   4 Proposals
We need drawings to give to a woodworker so he can build this bar. We prefer you do the in autocad / sketckup but if you have other software just mention what you would like to use. Drawings must be in enough detail ( dimensions etc.) so the woodworker can order material and build it . We need plans, elevation details, section and 3d views ( 2 minimum) Attached is a rendering of the design for the bar. Also we have attached a bunk bed design we had done - this shows the quality of what we want for the desk. We do not have any files of the rendering of the bar - sorry/ Please just submit two examples of similar restaurant bars you have done - Please note submissions without a fixed fee will not be considered. Thanks
Category: CAD       
Skills: AutoCAD, SolidWorks, SketchUp Pro, AutoDesk Revit       

s****ner
 [?]
Sign in to view client's details.
| s****ner
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 3h, 14m ago  |  Ends: 14d, 20h  |   0 Proposals
Fix and repair the Air Conditioning and Refrigeration systems. installation the systems. fix room cooling truck fix car AC
Category: Other - Engineering &...       
Skills: HVAC System Design, HVAC       

A****ssy
 [?]
Sign in to view client's details.
| A****ssy
|    Canada
Fixed Price: Less than $500   |  Posted: 6h, 38m ago  |  Ends: 14d, 17h  |   3 Proposals
I need a simulation in TRNSYS of a earth to air heat exchanger . I have done the project, but i can't simulate it. I can give you a picture with the project. You just need to connect the types and modify some values.
Category: Other - Engineering &...       

M****eni
 [?]
Sign in to view client's details.
| M****eni
|    Romania
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 7h, 51m ago  |  Ends: 14d, 16h  |   6 Proposals
Design using CAD/CAM programs(solidworks and camworks) CNC machines (installation applications & maintenance) EDM machines (installation application & maintenance) Raped prototype machines (application & maintenance) Vacuum casting machines (application & maintenance) Conventional machines (installation application & maintenance)
Category: CAD       

A****awy
 [?]
Sign in to view client's details.
| A****awy
|    Egypt
Fixed Price: Less than $500   |  Posted: 8h, 16m ago  |  Ends: 14d, 15h  |   0 Proposals
I am looking to create a frisbee for a new game i have invented. The frisbee needs to be approx 175g including the electronic timing device. What i hope to achieve is a frisbee that when thrown is just a normal frisbee, but when caught it activates a variable timer 2/3/4/5 sec. The timer then activates LED's to flash if the frisby is not spinning before the time has lapsed. The electronics need to be moulded within the plastic with access to the battery and the switch for on/off and varying the timer needs to be accessible. Finally the unit needs to be waterproof, sand proof etc. As this will predominantly be a beach game.
Category: Product Design       

a****808
 [?]
Sign in to view client's details.
| a****808
|    Australia
Fixed Price: Less than $500   |  Posted: 9h, 30m ago  |  Ends: 6d, 14h  |   12 Proposals
I need CAD drawings similar to the pipe/tubing of the attached image. I will supply the dimensions the curves will be left to you. I have the frame/chassis of the car and will give you the dimensions to work with the pipe/tubing. I will also spec the pipe OD and ID. Joints are to be welded and will be affixed to the car with clamp, nuts and bolts. $200.00 USD is too much for this job. Supplier must be able to communicate in English over the phone.
Category: CAD       
Skills: AutoCAD, AutoCAD 2012       

R****uma
 [?]
Sign in to view client's details.
| R****uma
|    United States
Fixed Price: Not Sure   |  Posted: 10h, 50m ago  |  Ends: 14d, 13h  |   22 Proposals
We are a manufacturer supplying the automotive industry. We have an immediate need for someone with CAD and 3D rendering experience. Scope of work will be to create a render image of our product. There will be a need for ongoing work.
Category: CAD       
Skills: 3D Modeling, AutoCAD, Industrial Design       

M****N_S
 [?]
Sign in to view client's details.
| M****N_S
|    Australia
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: 10h, 59m ago  |  Ends: 14d, 13h  |   5 Proposals
Looking help for project on systems engineering where taking one system as model and identifying the subsystems, functions, concept exploration, concept definition, performance requirements etc
Category: Other - Engineering &...       
Preferred Location: North America, Western Europe, Eastern Europe, India/Southern Asia, Eastern Asia, Australia/Oceania

r****143
 [?]
Sign in to view client's details.
| r****143
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 12h, 31m ago  |  Ends: 11h, 28m  |   1 Proposal
Need to hire USSD developer for developing apps on a platform with minimal knowledge about coding its an easy jobbbb
Category: Product Design       

U****pia
 [?]
Sign in to view client's details.
| U****pia
|    Singapore
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: 15h, 3m ago  |  Ends: 8h, 56m  |   5 Proposals
Looking help for project on systems engineering where taking one system as model and identifying the subsystems, functions, concept exploration, concept definition, performance requirements etc
Category: Other - Engineering &...       
Preferred Location: North America, Western Europe, Eastern Europe, India/Southern Asia, Eastern Asia, Australia/Oceania

r****143
 [?]
Sign in to view client's details.
| r****143
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: 15h, 17m ago  |  Ends: 14d, 8h  |   4 Proposals
Looking help for project on systems engineering where taking one system as model and identifying the subsystems, functions, concept exploration, concept definition, performance requirements etc
Category: Other - Engineering &...       

r****143
 [?]
Sign in to view client's details.
| r****143
|    United States
Fixed Price: Less than $500   |  Posted: 16h, 10m ago  |  Ends: 14d, 7h  |   18 Proposals
The purpose of this job is to design and fabricate a mold for some prototype parts I am developing. I have drafted most of the specifications and dimensions for the mold in Visio. I would need you to assess my proposal and offer solutions / changes needed to actually fabricate it.
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       
Preferred Location: North America

m****bes
 [?]
Sign in to view client's details.
| m****bes
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 16h, 58m ago  |  Ends: 14d, 7h  |   11 Proposals
So I have design wok that is drawn by an engineer. That's the good news, now the bad news for us is we don't have workshop drawings. I'm looking for a freak to take our drawings and make them workable. The freakish worker will ultimately save the day. Because I am currently so deep in red tape I feel like i'm drowning in it! If you can take a scanned A4 and turn it into some thing amazing with ease then you could be the freak we need on our freakish team to perform what seems to be a freakish project. It's transportable buildings, the first job is a 12m x 3m building and we pretty well made a start on this. My engineer here in Perth has said we need a technical office for all these kinds of concerns in building etc. Hopefully this can be you, for now I am looking to take it job at a time.
Category: Product Design       

R****tag
 [?]
Sign in to view client's details.
| R****tag
|    Australia
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: 18h, 19m ago  |  Ends: 14d, 5h  |   8 Proposals
Require the services of rendering a realistic-looking image for a one page pamphlet. The pamphlet will include text that I have provided on a template provided. Would be helpful if willing to sign an NDA. Thank you in advance!
Category: Product Design       

a****aum
 [?]
Sign in to view client's details.
| a****aum
|    United States
Fixed Price: Not Sure   |  Posted: 19h, 46m ago  |  Ends: 14d, 4h  |   8 Proposals
I am seeking an mechanical engineer or firm that can help me develop a working prototype for a new product that involves something close to a spring roller shade with a modified cover or attachment bracket. Would like someone with experience that can also suggest cost-effective manufacturing methods. Would like someone with a good rating and multiple jobs completed. Must be willing to sign NDA. If interested, please reply with examples of your previous work. Please include keywords Roller Shade in your response.
Category: Product Design       

G****ner
 [?]
Sign in to view client's details.
| G****ner
|    United States
Fixed Price: Less than $500   |  Posted: 19h, 59m ago  |  Ends: 14d, 4h  |   3 Proposals
Looking for someone who is good with logic and basic understanding of the game of poker. Poker has 10 levels from High Card to Royal Straight Flush. There is no real basic logical sense from one level to the next. I want to make sense of this game by making a kid version that relates to the gameplay of poker. A possible comparison could be Football (US Soccer) so a child can understand the rules and easily memorize the gameplay.
Category: Other - Engineering &...       

E****020
 [?]
Sign in to view client's details.
| E****020
|    United States
Hourly Rate: $20 - $50 / hr   |  Duration: 1-2 weeks  |  Posted: 21h, 43m ago  |  Ends: 14d, 2h  |   9 Proposals
Adaptive Habitat (  [obscured]  /) combines informed observation, rigorous analysis, and innovative technology with environmental consciousness to create resilient, high-performance homes and farms. Homesteads that leverage and interact with the environment in which they're built, producing their own energy and food, harvesting and storing water, cycling nutrients, and restoring the surrounding ecosystems. As engineers and ecologists, we offer a perspective and range of services unique in the market. We combine our scientific, technological, environmental and management credentials to direct complex, multidisciplinary projects from site analysis to project planning, through to design, implementation, and ongoing support for clients and properties across North America. Our business is rapidly growing and we need to find and foster working relationships with one or more talented draftspersons, graphical communicators and artists who can take our designs, technical informatio...
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

V****ure
 [?]
Sign in to view client's details.
| V****ure
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 22h, 54m ago  |  Ends: 14d, 1h  |   6 Proposals
Hi Ashish, We are a company that is working in the IOT space and are ready with the first version prototype of our product. The product houses a PCB powered by a flat battery. We want to redesign the housing and the mechanicals for the PCB to be powered by a AA battery. Let us know if you have worked in this space and if you would like to discuss further.
Category: Other - Engineering &...       

k****shi
 [?]
Sign in to view client's details.
| k****shi
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Jul 29, 2015  |  Ends: 13d, 23h  |   2 Proposals
Hi, I would like to hire an expert pattern maker to design 2-3 women's swimwear suits to include specifications for manufacturer to create a sample. Thanks, Jeff
Category: CAD       

j****as1
 [?]
Sign in to view client's details.
| j****as1
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 29, 2015  |  Ends: 13d, 23h  |   6 Proposals
I have designed a PCB schematic in DipTrace and using it, have produced multiple prototypes using laser printer/iron on copper pcb/muriatic acid etching and hand-placement of mostly SMT parts. I am now looking to do a small production or prototype run with one of the PCB prototype manufacturers, such as e-teknet.com. protoexpress.com or screamingcircuits.com. I know that manufacturers have specifications for the schematics that must be met, especially when it comes to trace size and spacing. I am looking for someone experienced in Diptrace to modify my schematic to meet the manufacturing specifications of one or more prototype manufacturers (to be determined) and to prepare the files (Gerber, etc) so they contain everything the manufacturer needs to produce a prototype or small manufacturing run.
Category: Other - Engineering &...       
Skills: PCB Design       

c****r60
 [?]
Sign in to view client's details.
| c****r60
|    United States
Fixed Price: Not Sure   |  Posted: Jul 29, 2015  |  Ends: 13d, 22h  |   5 Proposals
Create a schematic and single sided circuit board design in 'Eagle files' using Cadsoft Eagle from a hand annotated schematic and PCB layout similar to those shown in the attached design guideline document.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

t****eon
 [?]
Sign in to view client's details.
| t****eon
|    United States
Fixed Price: Less than $500   |  Posted: Jul 29, 2015  |  Ends: 13d, 20h  |   1 Proposal
I'm looking for software developers that will be able to assist me in designing customised pieces of software for social media platforms (mainly Facebook) The candidate must have excellent programming skills with previous experience working with Facebooks API and developing software for this platform, candidate must also be able to speak good english, follow instructions, work well with others and use their own initiative and ideas to assist with the completion of the software.
Category: Other - Engineering &...       

U****nue
 [?]
Sign in to view client's details.
| U****nue
|    United Kingdom
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job