Save this Search
     
Sort by:
  • Posted Date
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: 1h, 30m ago  |  Ends: 14d, 22h  |   0 Proposals
looking for DESIGN FOR THE MECHANICAL, ELECTRICAL, AND PLUMBING (MEP) ENGINEERING Budget is less, time and budget is tight, please reply if you are familiar with required skill and expertise. software REVITS 2013-14
Category: CAD       

j****123
 [?]
Sign in to view client's details.
| j****123
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 9h, 31m ago  |  Ends: 14d, 14h  |   4 Proposals
I'm looking for a manufacturer to manufacture a small number of prototypes for a backpack design. Technical specifications have already been prepared. The only tasks needed now are: * Determine feasibility of manufacturing prototype based on technical specifications * Identifying potential suppliers and manufacturers willing to work on producing a small number of prototypes * Manufacture prototype
Category: Product Design       
Skills: Manufacturing Design       

j****ran
 [?]
Sign in to view client's details.
| j****ran
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: Not Sure  |  Posted: 10h, 25m ago  |  Ends: 14d, 13h  |   11 Proposals
Mechanical engineering requiring CAD drawings and designs for various targets systems and related equipment.
Category: Other - Engineering &...       
Skills: AutoCAD, Industrial Engineering, Electronics       

g****rsf
 [?]
Sign in to view client's details.
| g****rsf
|    United States
Fixed Price: Not Sure   |  Posted: 13h, 18m ago  |  Ends: 14d, 10h  |   0 Proposals
Looking to have a site with a landing page opt-in builder that works along with aweber and getresponce. This will not use the form from aweber or getresponce but the html script for the campaign can be put into the builder for custom forms with in the landing page builder that people have to sign up and be a member to use free. Must know what you are doing. I don't want bugs forever on this thing.
Category: Product Design       
Skills: Application Programming, AWeber       

s****la2
 [?]
Sign in to view client's details.
| s****la2
|    United States
Fixed Price: $50 - $150   |  Posted: 13h, 22m ago  |  Ends: 14d, 10h  |   9 Proposals
I need someone that is experienced in Eagle CAD to make a change to an existing PCB. This change consists of hooking up three new low power MOSFETs, adding 0603 three resistors, and rewiring a couple of nets. I will provide both the eagle schematic and PCB, plus a pdf of the new schematic with the changes highlighted. If we are happy with the results, this will probably lead to future jobs too. I'm a circuit designer but I'm not very good with Eagle. So no circuit design experience needed, just lots of experience laying out printed circuit boards with Eagle CAD. Thanks.
Category: CAD       
Skills: OrCAD, Electronics, PCB Design       

J****lEE
 [?]
Sign in to view client's details.
| J****lEE
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 15h, 40m ago  |  Ends: 14d, 8h  |   8 Proposals
We need assistance in designing our Landscape, Deck, Patio, outdoor kitchen, irrigation system and do storm water management. We also would like to extend our driveway and install fence. I am looking for an expert, who can help us design and show 3D renderings to visualize.
Category: CAD       
Skills: 3D Modeling, ArchiCAD, Architecture, SolidWorks       

a****oup
 [?]
Sign in to view client's details.
| a****oup
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 3-4 weeks  |  Posted: 17h, 54m ago  |  Ends: 14d, 6h  |   1 Proposal
I am launching a network marketing company that will have 3 categories of products. 1. Body Shaping men's and women's wear like Spanx, sample attached, therefore I need someone who can source these garments from the material, as an example 72% polyamide 28% elastane and body suit, 61 % poliamde 33% cotton 6 elastone, to the manufacturer to the shipping, quantities for break points etc. The same would for the other 2 categories, 2. nutritional supplements like MSM and 3. personal care items like eye creams and lotions. I need a document that shows me step by step what I need to do from sourcing to selling these products.
Category: Product Design       

D****ats
 [?]
Sign in to view client's details.
| D****ats
Fixed Price: Not Sure   |  Posted: 19h, 42m ago  |  Ends: 14d, 4h  |   0 Proposals
Inviting professionals of experienced and certified Six Sigma (Black Belt level) professionals to develop Video content for the Six Sigma Black Belt certification training (as per ASQ Six Sigma Black Belt Body of Knowledge). Content needs to be in line with the latest exam structure, and will include all necessary concepts in the form of a) Videos: Need to provide 10-15 hours of video content b) Flash Cards: Min. 500. These are of a flip-type concept-definition format c) Section tests: 1 test (with ~30 questions) per topic/section d) Mock Exams: 4 sets as per the latest exam format e) Tool Kits: Spreadsheet/Powerpoint/Word based templates for Six Sigma Black Belts (minimum 15) The videos also needs to include suitable animations/animation ideas for which need to form minimum 30% of the overall content coverage.Bids will be evaluated on price, quality, and delivery time-frame. Please respond to this post to apply. Preference will be given to experts from US and UK. Also, please sha...
Category: Other - Engineering &...       
Skills: Manufacturing Design, Lean       

L****are
 [?]
Sign in to view client's details.
| L****are
|    India
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Apr 17, 2014  |  Ends: 13d, 21h  |   4 Proposals
I am looking for an individual that will test a logical quiz meant for employees. This is proprietary software that will require confidentiality agreement. The quiz willbe less than 60 questions. The successful candidate will be able to Solve puzzles swiftly Have a mathematical capacity up to including Calculus Have a very good understanding of the English Language Must be able to finish the quiz within a set time Must have some sort of programming knowledge Have locomotive knowledge Geometry Score high on previous IQ tests (not a measure of intelligence) with proof Provides adequate constructive feedback Can provide insights and ideas that are though provoking This task will be overseen by 2 programmers for a reputable Canadian company. If the individual understands, completes, scores high and provides constructive feedback there will be further requests from the individual up to and including full time employment. Thanks
Category: Other - Engineering &...       

c****sp1
 [?]
Sign in to view client's details.
| c****sp1 *
|    United States
Fixed Price: About $30   |  Posted: Apr 17, 2014  |  Ends: 13d, 21h  |   12 Proposals
Hi, I am looking for an architect who is expert in Archicad 17, to create a roof of a building as its images. Drawing the building is completed entirely and only its roof is remaining. Please find the attached images for more clarification. Sara
Category: CAD       
Skills: ArchiCAD       

s****e13
 [?]
Sign in to view client's details.
| s****e13
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: Apr 17, 2014  |  Ends: 13d, 20h  |   4 Proposals
I am an Interior Designer, and working in a small project for a jewelry store, I need to do construction documents, Auto cad 3D well I need help with the drafting part, I did some work already plan an elevations, but I haven't done cad for about 5 years so I am a bit behind and slow, I wil need some detail drafting for showcases to be send to millwork.. I need a local person NY city, or Westchester NY Thank you Reina T.
Category: CAD       
Skills: 3D Modeling, AutoCAD, 3D Rendering       

R****TRO
 [?]
Sign in to view client's details.
| R****TRO
|    United States
Fixed Price: $20 - $50   |  Posted: Apr 16, 2014  |  Ends: 5d, 15h  |   13 Proposals
Hello again. I need some fix ups done on the drawing you did for me a little while back. I noticed a couple small dimension mistakes in drawings and I also need some extra work done on it. I need All drawings on 1 file so the whole layout can be seen in one pdf I need the internal folds to the doors shown I need the doors of LHS and RHS drawn separately with the folds and dimensions etc The quantity of pieces added to eash drawing 1:1 scale added I need flat profiles of eash piece Please let me know what this will cost and when you can do it. I Have put the job up as public viewing but if your price is fair I will just accept your quote. Thanks Norm 1 alteration extra done to only one of the 5 drawings
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

k****orm
 [?]
Sign in to view client's details.
| k****orm
Fixed Price: Less than $500   |  Posted: Apr 16, 2014  |  Ends: 13d, 14h  |   3 Proposals
We need three white papers developed, one for each market segment, that shows how to use a Solid State Relay in a typical application. The markets are as follows: 1. Aerospace/Defense 2. Medical Equipment (and diagnostics) 3. Transportation/Agricultural Equipment For each whitepaper, we need a problem to be stated (as in motor/heater control, etc...), a circuit design, simulated or tested, results and discussion of the results and comparison to other similiar designs. We are planning on using this for marketing and sending to engineers in these industries to help give them better ideas on how to use our products or give them a starting point or new ideas for the application of our products and/or technical knowledge.
Category: Other - Engineering &...       

s****yka
 [?]
Sign in to view client's details.
| s****yka
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 16, 2014  |  Ends: 13d, 11h  |   2 Proposals
I am looking to get some "patterned tights" created and I'm not sure how to go about doing that. I have the design for it. Anyone out there could help me with this?
Category: Other - Engineering &...       
Skills: screen printing, sewing       

C****Inc
 [?]
Sign in to view client's details.
| C****Inc
|    United States
Fixed Price: Less than $500   |  Posted: Apr 16, 2014  |  Ends: 1d, 9h  |   28 Proposals
I require a simple, professional 2D floor plan of my facility. I have attached a draft of (roughly) what I envisage the facility to look like: see 'Floor Plan.doc' To give you an idea of the specifications of each unit I have attached an image: 'Unit Dimensions.jpg'. These are the only dimensions I have but from these you should be able to estimate the required size of the remainder of the facility. - Store room and bathroom only really have to be 2m x 2m - Please add a front double door - Use colour if you wish - Please make any changes / additions you see fit - Let me know if you have any questions
Category: CAD       

B****oli
 [?]
Sign in to view client's details.
| B****oli
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 16, 2014  |  Ends: 58d, 6h  |   5 Proposals
Prepare graphic shapes for CNC Router cutting. Shape files will be defined in popular graphic program formats such as Adobe Illustrator, Autocad, Corel Draw etc. The task is to import those files into a CNC CAD program called EnRoute and prepare EnRoute cut files for input to a CNC Router. Work can be preformed off site and files can be sent back and forth via the internet. EnRoute knowledge is required.
Category: CAD       
Skills: AutoCAD, CAM       

j****bwj
 [?]
Sign in to view client's details.
| j****bwj
|    United States
Fixed Price: Not Sure   |  Posted: Apr 16, 2014  |  Ends: 13d, 4h  |   18 Proposals
Let's face it, most WiFi Access Points end up exactly where they belong, in a closet. Because, except for perhaps the Apple AirPort Extreme, they are butt-ugly! At least, that's what I think. Having said that, I don't like Apple's design. Or, I do not want to copy their style. I do respect the fact that at least they do DESIGN things and often put form before function. I also respect the "minimalistic" and "Bauhaus" design concepts. Before getting into what the purpose of the WiFi Access Point (ie. the features) is going to be, please allow me to try and share "my style" (if there is such a thing): - Clean (for example; No visible wires ever. Not even inside the device). - Subdued brushed-metal gray (Think HTC One). On top of this - and i can imagine this is hard to follow - the purpose of the design should be to convey my passion for the specific technology (used by the device) without making it geeky or nerdy. As an example: If I had a car (let's say...
Category: Product Design       

E****ard
 [?]
Sign in to view client's details.
| E****ard
|    Netherlands
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: Apr 16, 2014  |  Ends: 13d, 0h  |   7 Proposals
We have a fairly simple CFD analysis that needs to be done (impellers & 2 diff liquids). Will discuss more details about the project in detail over skype. We have frequent analysis requirements, please apply only if you're in London.
Category: Other - Engineering &...       
Skills: 3D Modeling, ANSYS, Manufacturing Design       

t****iqr
 [?]
Sign in to view client's details.
| t****iqr
|    United Kingdom
Fixed Price: Less than $500   |  Posted: Apr 15, 2014  |  Ends: 27d, 17h  |   14 Proposals
For this job our company is looking to build a trusting relationship with a business professional who is in close proximity to Bao'an, Shenzhen, China, 518126. We are working with a LED Lighting manufacturer who is based out of that area and we are looking for someone someone who can assist us by visiting the factory, inspecting the facilities, communicating in person with the factory representatives on our behalf, conduct pricing negotiations and perhaps assisting up with shipping arrangements. We will be working with various LED Lighting Manufacturers based out of China and ultimately we are looking to put together a team to help work with those manufacturers in order to facilitate large volumes of product sales to our Lighting Specialist, Electrical Contractor and General Contractor customers.
Category: Other - Engineering &...       

D****hew
 [?]
Sign in to view client's details.
| D****hew *
|    United States
Fixed Price: $300 - $500   |  Posted: Apr 15, 2014  |  Ends: 12d, 14h  |   3 Proposals
You are a wizard, an inventor, a tech savvy visionary who understands Mobile and GPS technology.... if this is you, ad signing an NDA is within your comfort zone, let's talk. Thank you.
Category: Product Design       

C****age
 [?]
Sign in to view client's details.
| C****age
|    United States
Fixed Price: $25,000 - $50,000   |  Posted: Apr 15, 2014  |  Ends: 12d, 14h  |   18 Proposals
Our company is engineering a product for the consumer public. The device takes in information from sensory probes, converts the analog to digital then imputs to a software plateform. The platform must be server based as hundreds of smartphones will be accessing it. The application designed must be at a consumer level. Easy to use and simplistic, but beautiful. The budget for engineering, prototyping, and completion of total system is set at 50k All hardware and software must be developed for this amount. This product must be perfect. Our company will not settle for anything less.
Category: Other - Engineering &...       

t****mur
 [?]
Sign in to view client's details.
| t****mur
|    United States
Fixed Price: $40 - $100   |  Posted: Apr 15, 2014  |  Ends: 12d, 13h  |   29 Proposals
Hello there.. the bike i want to copy is the eliptigo you can get images from their website . i would like to have all measurement and angles for that frame so it can be built from scratch. i only need the frame ... the green area . final file a 1/1 scale to be plottted in A0 or A1 the idea is use the blueprint at the work bench make only the necessary view
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, 3D Design       

m****gon
 [?]
Sign in to view client's details.
| m****gon
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job