Save this Search
     
Sort by:
  • Posted Date
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 1h, 20m ago  |  Ends: 14d, 22h  |   0 Proposals
Hi, just touching base with regarding a new idea I have for family travel. Please touch base with me at your earliest convenience. Thanks
Category: Other - Engineering &...       

a****els
 [?]
Sign in to view client's details.
| a****els
|    United States
Fixed Price: Less than $500   |  Posted: 4h, 27m ago  |  Ends: 14d, 19h  |   1 Proposal
Dear Dejan, I hope you are doing fine! Sorry for my late mail, but I was traveling and quite busy last week. Please find attached some new images. Ekaterina created them completely new in order to fix some details. Please also create completely new CAD drawings. The size should be similar to the first drawing. The black line (also here raised by 1mm) should not be broader than approximately 5mm. All black lines on the Sculpture should be raised by 1mm as in the earlier drawing. The stand should also have the same hight as in the drawing you already created. There is currently no need to color the sculpture, since we will create a sample with a CNC milling machine first and the decide on the colors. Could you please let me know until when and for what budget you could create this? Best regards, Kai
Category: CAD       
Skills: 3D Modeling, AutoCAD       

K****ndt
 [?]
Sign in to view client's details.
| K****ndt
|    Germany
Fixed Price: Not Sure   |  Posted: 6h, 58m ago  |  Ends: 14d, 17h  |   0 Proposals
I need to take sharp images from a sharp angle as shown in this drawing:   [obscured]  /s/as4p6fv20f3z9p8/CameraDimantions.pdf?dl=0 The camera is located 1-4 cm above the substrate (the drawing illustrates the case of 4 cm above the substrate). We did a small experiment with a good mobile phone camera, but the images aren't sharp, probably due to the sharp shooting angle. I'm looking for a lightweight optical design, suitable for small packaging, which produces sharp images. If you know a commercial off-the-shelf camera that can take such sharp images - I'll be glad to pay for that info. Best regards, Gil
Category: Other - Engineering &...       

g****123
 [?]
Sign in to view client's details.
| g****123
|    Israel
Fixed Price: Less than $500   |  Posted: 8h, 30m ago  |  Ends: 1d, 15h  |   4 Proposals
Hi People, I need solution to the matematical tasks in the attached document. They are a MatLab assignments as described beneath: Exercise 1: Write a matlab-function which solves the initial value problem for a system of differ- ential equations via the ?-method. Exercise 2: Write a matlab-function showing the movement of a forced friction-free pendulum. Exercise 3: Write a matlab-function which solves the Korteweg-de Vries equation. I need answers to this tasks till the end of the day, reward is 80$ for this project. Good luck.
Category: Other - Engineering &...       
Skills: Mathematics       

m****nja
 [?]
Sign in to view client's details.
| m****nja
|    Serbia
Fixed Price: $500 - $1,000   |  Posted: 21h, 16m ago  |  Ends: 14d, 2h  |   3 Proposals
I am looking for quotes to build a prototype facial recognition device using Raspberry Pi. Features: Setup Mode: 1. Take initial photo of person. 2. Enter person's name. Tracking Mode: 1. While camera is active, recognize face against setup photo and log who it was. Deliverable: 1. Components needed to setup the raspberry device (camera, lcd display, etc). 2. Program with features listed.
Category: Product Design       
Skills: Raspberry Pi       

d****gal
 [?]
Sign in to view client's details.
| d****gal
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 23h, 24m ago  |  Ends: 29d, 0h  |   0 Proposals
Minimum skill level required 40 HOURS PATERN WORK 10 HOURS OF GRADING 6 HOURS OF DRAPING 3 HOURS OF TEXTILE SCIENCE 6 HOURS OF DESIGN DEVELOPMENT 6 HOURS OF PRODUCTION SEWING METHODS 3 HOURS OF PRODUCTION PLANNING AND SCHEDULING 3 HOURS OF ADVANCED MATHEMATICS FORMAL EDUCATION A PLUS BUT NOT DECIDING FACTOR- IF FORMAL EDUCATION ONLY WITH NO EXPERIENCE TRANSCRIPTS WILL BE REQUIRED.
Category: CAD       
Preferred Location: North America

A****sst
 [?]
Sign in to view client's details.
| A****sst
|    United States
Fixed Price: Not Sure   |  Posted: May 29, 2015  |  Ends: 5d, 23h  |   15 Proposals
Hi, I have a CAD file of a small part that I need to have Metal Injection Molding according to these design guidelines:   [obscured]  /metal-injection-molding/design-guidelines Currently, the file has not yet been "designed for manufacture." If you can convert my CAD design into a design that is ready for Metal Injection Molding then please answer the following: How many parts have you Metal Injection Molded If you are interested in the project, I will send you the CAD file to get a more specific quote.
Category: Product Design       

D****en5
 [?]
Sign in to view client's details.
| D****en5
|    United States
Fixed Price: Not Sure   |  Posted: May 29, 2015  |  Ends: 13d, 20h  |   1 Proposal
For an infant medical diagnostic device we need to take thermal pictures of a small area on the infant's chest. The thermal camera is placed 1-4 cm from the infant's chest, and needs to be as small and low weight as possible because it is placed on the infant while sleeping. The required sensitivity is <0.1K and we need very few pixels because the infant doesn't move so we don't perform tracking. For this proof of concept phase we need a high level design of the camera and description of the considerations that we should take in account. Please send me questions if more info is required. Thanks, Ron
Category: Other - Engineering &...       
Skills: Electronics, optics, thermal imaging       

R****ign
 [?]
Sign in to view client's details.
| R****ign
|    Israel
Fixed Price: Less than $500   |  Posted: May 29, 2015  |  Ends: 13d, 20h  |   5 Proposals
I am looking for a cutting tools engineer that could design on Solid Works. I mainly need an engineer who is knowledgeable in aviation cutting tools. I have a few project to work on and would need someone soon as possible.
Category: Other - Engineering &...       

e****aft
 [?]
Sign in to view client's details.
| e****aft
|    United States
Fixed Price: Less than $500   |  Posted: May 29, 2015  |  Ends: 5d, 12h  |   54 Proposals
Hello, I have an ongoing requirement for Solidworks models and drawings to be generated. Sometimes these will be from hand drawn sketches, and sometimes from other CAD documents. I need someone who can respond to something like "Get this part modeled (either from a file form the manufacturer or done yourself form a 2D CAD drawing), along with this other part in this configuration and generate a drawing" This inquiry is to establish a relationship with a freelancer who I hope to be able to give regular, if small amounts of work to. I'd like to agree a fixed price for each individual job at its outset. Anyone interested in bidding should reply giving an idea of total cost for the project. Just to prove you have read what I have typed, (you really would not believe how many people don't!) please include the word Cheadle in the first line of your proposal. Any samples of work you can send through will be great Thanks Paul
Category: CAD       
Skills: SolidWorks       

p****084
 [?]
Sign in to view client's details.
| p****084
|    United Kingdom
Fixed Price: Not Sure   |  Posted: May 29, 2015  |  Ends: 13d, 11h  |   11 Proposals
I need someone who can draw below top in Solidworks.   [obscured]  /product/4XWHE4H85/spinning-top?li=search-results-1&optionId=42288546 However grip part wil be in below design:   [obscured]  /wp-content/uploads/2011/09/Zebra-F701-Grip.jpg - Solidworks 2012 needs to be used. - I need both CAD and technical drawing. Thanks,
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

e****r87
 [?]
Sign in to view client's details.
| e****r87
|    Turkey
Fixed Price: Less than $500   |  Posted: May 29, 2015  |  Ends: 13d, 5h  |   42 Proposals
I am looking for someone to combine two 2d files and the attached pictures into a final water tight stl, ads or dxf 3d file. While the final file should be accurate this is not an extremely precise model that is required and the 2d files will likely take a little explanation. The final product will be a paddle. I am looking for a quick turn around of roughly 2 days.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, Autodesk, 2D Design       

J****s13
 [?]
Sign in to view client's details.
| J****s13
|    United States
Fixed Price: Not Sure   |  Posted: May 28, 2015  |  Ends: 13d, 2h  |   12 Proposals
Looking to get some fresh ideas on a product that will move a 5lb object in a straight line for a minimum distance of 36". If your idea can also include a radius movement when desired, it will be a great feature. The whole apparatus need to be suspended/fixed preferably in 1 support point but if that's impossible, then maximum 2 support points would be needed. This project can be an articulated arm or whatever you can come up with but preferably we are not looking for it to be a slider or dolly on track. If you can't design a 3D model but still have a good idea, you can present sketches or anything that can be developed further since the project is intended to be manufactured in the long run. Please provide us with a quote and time of execution and if you need more details about this, we can provide it by email. (Check attachment) Thanks and looking forward to working with you
Category: Product Design       

n****huu
 [?]
Sign in to view client's details.
| n****huu
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 28, 2015  |  Ends: 13d, 1h  |   3 Proposals
Similar product: Verizon fleetmatics I would like to create an OBD device to interface with a front end to report fleet position and driving performance. The front end design of the application will be delivered from a separate provider.
Category: Product Design       
Skills: Manufacturing Design, Electronics       

L****cob
 [?]
Sign in to view client's details.
| L****cob
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 28, 2015  |  Ends: 13d, 1h  |   5 Proposals
I need a drawings and permit package for and second floor deck project in Lower Fredrick township in Montgomery County Pennsylvania. I have preliminary drawing and specs. Needed ASAP
Category: CAD       
Skills: 3D Modeling, AutoCAD       

s****mmy
 [?]
Sign in to view client's details.
| s****mmy
|    United States
Fixed Price: Not Sure   |  Posted: May 28, 2015  |  Ends: 4d, 21h  |   16 Proposals
Hi I am looking to hire a CFD engineer with experience in managing high and low pressure air flow. One of my biggest challenges is that the pressure needs to be created using low rpms. Before any analysis takes place, I have 4 questions which relate to the project which I am willing to pay someone to answer. If you are happy to sign an NDA, I would love to work with you. I appreciate your knowledge in this area and thank you for your assistance.
Category: CAD       
Skills: 3D Modeling, ANSYS, AutoCAD, SolidWorks       

T****ash
 [?]
Sign in to view client's details.
| T****ash
|    United Kingdom
Fixed Price: Less than $500   |  Posted: May 28, 2015  |  Ends: 12d, 18h  |   9 Proposals
I am looking for an individual to develop a conceptual design for a case that will be used to protect an autopilot used on Unmanned Aerial Vehicles (UAVs). Job Responsibilities: -Develop/deliver 1-2 case designs complete with CAD files -Deliver CAD files that are compatible with SolidWorks, Fusion 360, and standard 3D printers -Take into consideration the end user of the product in order to design a case that is both functional and aesthetically appealing -Understand how the product will be manufactured/used and translate that into the design Job Qualifications: -Must have experience with CAD -Must have 3D printing experience -Some knowledge of drones and unmanned aerial systems is desirable -Basic knowledge of standard IP68 wire/pin connections is desirable
Category: CAD       

n****zle
 [?]
Sign in to view client's details.
| n****zle
|    United States
Fixed Price: Less than $500   |  Posted: May 28, 2015  |  Ends: 4d, 16h  |   29 Proposals
Hello, I'm looking for someone to convert my drawings/sketch to a CAD file so it can be read by a water jet machine. Item is a bottle opener. Will need file translated into multiple formats including .pdf, jpg, and .dxf. **** I will only work with designer located in the USA **** Looking for someone to establish a long term business relationship. My other designer is too busy and currently not taking new jobs. Looking for his replacement. I will have more jobs coming up for you as well. Thank you!
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       
Preferred Location: United States

b****inc
 [?]
Sign in to view client's details.
| b****inc
|    United States
Fixed Price: Less than $500   |  Posted: May 28, 2015  |  Ends: 12d, 15h  |   0 Proposals
We are looking for someone to setup and program Engenius ECB350 and the ECB600 Wireless Access Points. We will dropship the units to your location on an as needed basis. you will need to upgrade the software and load the TAR setup program. Then Ship them via USPS Priority Mail to our customer. We pay $10 per unit programmed. Must be located in USA.
Category: Other - Engineering &...       

r****905
 [?]
Sign in to view client's details.
| r****905
|    United States
Fixed Price: $500 - $1,000   |  Posted: May 28, 2015  |  Ends: 87d, 14h  |   3 Proposals
The project I invite you to be part of will be the development of the Control / Automation / Mechatronics part of a new RC Helicopter that will be manufactured in Brazil. Besides flying it will perform other functions that must be covered in the system. interested candidates please apply to the job. Thank you
Category: Product Design       
Skills: Electronics, Digital Engineering       

v****tes
 [?]
Sign in to view client's details.
| v****tes
|    Brazil
Fixed Price: $100 - $3,000   |  Posted: May 28, 2015  |  Ends: 13h, 51m  |   14 Proposals
Stanmore Roof This job is to detail the hot rolled steelwork as shown on the enclosed engineers drawings. It is a curved roof structure for the UK. Must be detailed in Tekla 18 or 19 Candidate MUST have good experience in detailing curves in Tekla Base plate, shear and moment connection designs will be provided The contract will be split into 4 stages: 1. Stick Model and produce Prelim GA's (General Arrangement Drawings) 2. Connecting the model 3. Alterations and producing construction GA's 4. Producing fabrication information, including editted fabrication drgs and marking plans etc The total program for this contract can be no more than 3 weeks. Payments will be split throughout the project and will be released within 48 hours of satisfactory completion each stage. A daily progress report, Tekla model and BIM model must be sent everyday so that progress can be monitored The latest Tekla working model and GA's must also be available on request. Thank you
Category: CAD       
Skills: Tekla Structures       

P****mes
 [?]
Sign in to view client's details.
| P****mes
|    United Kingdom
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job