Save this Search
     
Sort by:
  • Posted Date
Fixed Price
Fixed Price: Less than $500   |  Posted: 1h, 37m ago  |  Ends: 14d, 22h  |   1 Proposal
Dear Dejan, I hope you are doing fine! Sorry for my late mail, but I was traveling and quite busy last week. Please find attached some new images. Ekaterina created them completely new in order to fix some details. Please also create completely new CAD drawings. The size should be similar to the first drawing. The black line (also here raised by 1mm) should not be broader than approximately 5mm. All black lines on the Sculpture should be raised by 1mm as in the earlier drawing. The stand should also have the same hight as in the drawing you already created. There is currently no need to color the sculpture, since we will create a sample with a CNC milling machine first and the decide on the colors. Could you please let me know until when and for what budget you could create this? Best regards, Kai
Category: CAD       
Skills: 3D Modeling, AutoCAD       

K****ndt
 [?]
Sign in to view client's details.
| K****ndt
|    Germany
Fixed Price: Not Sure   |  Posted: 16h, 52m ago  |  Ends: 14d, 7h  |   4 Proposals
Hi, I need to create a circuit board and the schematics for a smart watch. If you decide to work with me we can talk more about the features so we can have a better communication for the project. Thank you!
Category: Product Design       

a****223
 [?]
Sign in to view client's details.
| a****223
|    United States
Fixed Price: $500 - $1,000   |  Posted: 18h, 26m ago  |  Ends: 14d, 5h  |   3 Proposals
I am looking for quotes to build a prototype facial recognition device using Raspberry Pi. Features: Setup Mode: 1. Take initial photo of person. 2. Enter person's name. Tracking Mode: 1. While camera is active, recognize face against setup photo and log who it was. Deliverable: 1. Components needed to setup the raspberry device (camera, lcd display, etc). 2. Program with features listed.
Category: Product Design       
Skills: Raspberry Pi       

d****gal
 [?]
Sign in to view client's details.
| d****gal
|    United States
Fixed Price: Not Sure   |  Posted: 21h, 37m ago  |  Ends: 6d, 2h  |   15 Proposals
Hi, I have a CAD file of a small part that I need to have Metal Injection Molding according to these design guidelines:   [obscured]  /metal-injection-molding/design-guidelines Currently, the file has not yet been "designed for manufacture." If you can convert my CAD design into a design that is ready for Metal Injection Molding then please answer the following: How many parts have you Metal Injection Molded If you are interested in the project, I will send you the CAD file to get a more specific quote.
Category: Product Design       

D****en5
 [?]
Sign in to view client's details.
| D****en5
|    United States
Fixed Price: $250 - $300   |  Posted: 22h, 55m ago  |  Ends: 14d, 1h  |   7 Proposals
We are looking for a pioneer engineer that is good in the area of protoyping small scale wood milling CNC machine using microcontroller and also having the ability to make an autocad drawing of the parts need Thanks for looking at our proposal
Category: Product Design       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       

k****hop
 [?]
Sign in to view client's details.
| k****hop
Fixed Price: Less than $500   |  Posted: May 29, 2015  |  Ends: 13d, 16h  |   5 Proposals
We need some one who can perform a computer simulated drop test for a packaging product. It is a part molded from polypropylene to protect the corners of desk tops during shipping. See attached PDF. We need to know if the part as designed will adequately protect the corners of a desktop if the top is dropped during shipping. I can supply the necessary parameters for the test.
Category: Product Design       
Skills: Computer Engineering       

g****ney
 [?]
Sign in to view client's details.
| g****ney
|    United States
Fixed Price: Less than $500   |  Posted: May 29, 2015  |  Ends: 5d, 15h  |   54 Proposals
Hello, I have an ongoing requirement for Solidworks models and drawings to be generated. Sometimes these will be from hand drawn sketches, and sometimes from other CAD documents. I need someone who can respond to something like "Get this part modeled (either from a file form the manufacturer or done yourself form a 2D CAD drawing), along with this other part in this configuration and generate a drawing" This inquiry is to establish a relationship with a freelancer who I hope to be able to give regular, if small amounts of work to. I'd like to agree a fixed price for each individual job at its outset. Anyone interested in bidding should reply giving an idea of total cost for the project. Just to prove you have read what I have typed, (you really would not believe how many people don't!) please include the word Cheadle in the first line of your proposal. Any samples of work you can send through will be great Thanks Paul
Category: CAD       
Skills: SolidWorks       

p****084
 [?]
Sign in to view client's details.
| p****084
|    United Kingdom
Fixed Price: Not Sure   |  Posted: May 29, 2015  |  Ends: 13d, 13h  |   11 Proposals
I need someone who can draw below top in Solidworks.   [obscured]  /product/4XWHE4H85/spinning-top?li=search-results-1&optionId=42288546 However grip part wil be in below design:   [obscured]  /wp-content/uploads/2011/09/Zebra-F701-Grip.jpg - Solidworks 2012 needs to be used. - I need both CAD and technical drawing. Thanks,
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

e****r87
 [?]
Sign in to view client's details.
| e****r87
|    Turkey
Fixed Price: Less than $500   |  Posted: May 29, 2015  |  Ends: 13d, 8h  |   41 Proposals
I am looking for someone to combine two 2d files and the attached pictures into a final water tight stl, ads or dxf 3d file. While the final file should be accurate this is not an extremely precise model that is required and the 2d files will likely take a little explanation. The final product will be a paddle. I am looking for a quick turn around of roughly 2 days.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, Autodesk, 2D Design       

J****s13
 [?]
Sign in to view client's details.
| J****s13
|    United States
Fixed Price: Not Sure   |  Posted: May 29, 2015  |  Ends: 13d, 8h  |   6 Proposals
Hello, i will make a big expo in LA conference center in Junary, and I am going to make a big technologycal revolution in the conferences, I will make the enter tickets for different, it wont be a peper, it will be a special bracelet, the one will have an encriptation chip or barcode, the one will function like a money wallet and permition wallet, this is because there will be recharge zones that will be able to recharge the money in it and in that way you wull be able to waste money in the Expo. In the permition there will be a lot of types, there will be the standar type, the vip type, the exhibitor, the logistic personal and the organizators, and there will be a different level of permition. the brazalet has to work without internet, something like a credit card, in this chase the database is going to be make by the person who will program the page, nd you have to integrate the serial system of the brazalet with the database, it must to be automatic, no human necesity to make that. ...
Category: Product Design       

d****gue
 [?]
Sign in to view client's details.
| d****gue
|    Venezuela
Fixed Price: Not Sure   |  Posted: May 28, 2015  |  Ends: 13d, 5h  |   12 Proposals
Looking to get some fresh ideas on a product that will move a 5lb object in a straight line for a minimum distance of 36". If your idea can also include a radius movement when desired, it will be a great feature. The whole apparatus need to be suspended/fixed preferably in 1 support point but if that's impossible, then maximum 2 support points would be needed. This project can be an articulated arm or whatever you can come up with but preferably we are not looking for it to be a slider or dolly on track. If you can't design a 3D model but still have a good idea, you can present sketches or anything that can be developed further since the project is intended to be manufactured in the long run. Please provide us with a quote and time of execution and if you need more details about this, we can provide it by email. (Check attachment) Thanks and looking forward to working with you
Category: Product Design       

n****huu
 [?]
Sign in to view client's details.
| n****huu
|    United States
Fixed Price: Not Sure   |  Posted: May 28, 2015  |  Ends: 5d, 0h  |   16 Proposals
Hi I am looking to hire a CFD engineer with experience in managing high and low pressure air flow. One of my biggest challenges is that the pressure needs to be created using low rpms. Before any analysis takes place, I have 4 questions which relate to the project which I am willing to pay someone to answer. If you are happy to sign an NDA, I would love to work with you. I appreciate your knowledge in this area and thank you for your assistance.
Category: CAD       
Skills: 3D Modeling, ANSYS, AutoCAD, SolidWorks       

T****ash
 [?]
Sign in to view client's details.
| T****ash
|    United Kingdom
Fixed Price: Not Sure   |  Posted: May 28, 2015  |  Ends: 4d, 22h  |   0 Proposals
We are looking for the design and/or procurement of an harness which would be used to support our industrial instrument and allow an operator to support & operate the instrument while freeing both of his hands. The instrument has a touch screen interface, therefore the position on the harness must facilitate its operation. The instrument is of the following dimensions and weight: - Dimensions (W×H×D): 355×288×127 mm (14.0×11.3×5.0 in) - Weight: 6.6 kg (14.5 lb) The harness should be robust and ergonomic for its daily industrial life usage. The harness should be used in the following environmental conditions: - IP rating Designed for IP65 - Operating temperature 0?40 °C (32?104 °F) - Operating humidity 95 %, non-condensing - Compliance ASME, EN 61010-1, CE, WEEE, FCC Part 15B, ICES-003, AS/NZS CISPR 22, RoHS We initially have tested harness designed for camera (see Kinésis Photo Gear H717). The solution is good with our instrument but we are looking for a better adapted sol...
Category: Product Design       

M****yfi
 [?]
Sign in to view client's details.
| M****yfi
|    Canada
Fixed Price: Less than $500   |  Posted: May 28, 2015  |  Ends: 12d, 20h  |   8 Proposals
I am looking for an individual to develop a conceptual design for a case that will be used to protect an autopilot used on Unmanned Aerial Vehicles (UAVs). Job Responsibilities: -Develop/deliver 1-2 case designs complete with CAD files -Deliver CAD files that are compatible with SolidWorks, Fusion 360, and standard 3D printers -Take into consideration the end user of the product in order to design a case that is both functional and aesthetically appealing -Understand how the product will be manufactured/used and translate that into the design Job Qualifications: -Must have experience with CAD -Must have 3D printing experience -Some knowledge of drones and unmanned aerial systems is desirable -Basic knowledge of standard IP68 wire/pin connections is desirable
Category: CAD       

n****zle
 [?]
Sign in to view client's details.
| n****zle
|    United States
Fixed Price: Less than $500   |  Posted: May 28, 2015  |  Ends: 4d, 19h  |   28 Proposals
Hello, I'm looking for someone to convert my drawings/sketch to a CAD file so it can be read by a water jet machine. Item is a bottle opener. Will need file translated into multiple formats including .pdf, jpg, and .dxf. **** I will only work with designer located in the USA **** Looking for someone to establish a long term business relationship. My other designer is too busy and currently not taking new jobs. Looking for his replacement. I will have more jobs coming up for you as well. Thank you!
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       
Preferred Location: United States

b****inc
 [?]
Sign in to view client's details.
| b****inc
|    United States
Fixed Price: $500 - $1,000   |  Posted: May 28, 2015  |  Ends: 87d, 17h  |   3 Proposals
The project I invite you to be part of will be the development of the Control / Automation / Mechatronics part of a new RC Helicopter that will be manufactured in Brazil. Besides flying it will perform other functions that must be covered in the system. interested candidates please apply to the job. Thank you
Category: Product Design       
Skills: Electronics, Digital Engineering       

v****tes
 [?]
Sign in to view client's details.
| v****tes
|    Brazil
Fixed Price: $100 - $3,000   |  Posted: May 28, 2015  |  Ends: 16h, 42m  |   14 Proposals
Stanmore Roof This job is to detail the hot rolled steelwork as shown on the enclosed engineers drawings. It is a curved roof structure for the UK. Must be detailed in Tekla 18 or 19 Candidate MUST have good experience in detailing curves in Tekla Base plate, shear and moment connection designs will be provided The contract will be split into 4 stages: 1. Stick Model and produce Prelim GA's (General Arrangement Drawings) 2. Connecting the model 3. Alterations and producing construction GA's 4. Producing fabrication information, including editted fabrication drgs and marking plans etc The total program for this contract can be no more than 3 weeks. Payments will be split throughout the project and will be released within 48 hours of satisfactory completion each stage. A daily progress report, Tekla model and BIM model must be sent everyday so that progress can be monitored The latest Tekla working model and GA's must also be available on request. Thank you
Category: CAD       
Skills: Tekla Structures       

P****mes
 [?]
Sign in to view client's details.
| P****mes
|    United Kingdom
Fixed Price: Not Sure   |  Posted: May 28, 2015  |  Ends: 12d, 9h  |   4 Proposals
I need someone to design and manufacture T-Shirt Dresses. I will start with a low quantity order to assess demand. I want to have three different designs. I will nee a detailed proposal including the following: Design Cost Item Cost: S/M/L Minimum Quantity Order
Category: Product Design       
Skills: T-Shirt Manufacturing, apparel, sewing       

K****son
 [?]
Sign in to view client's details.
| K****son
|    United States
Fixed Price: Less than $500   |  Posted: May 28, 2015  |  Ends: 12d, 9h  |   34 Proposals
Hello we need some pedal karts drawn up in CAD with all the measurements. I have taken some picture's of the karts complete and some in pieces next to a tape. When completed drawing using measurements i gave you i will check them all and then correct if need to. see attached some of the pictures of the parks and measurements. time frame 3-4 weeks for completion
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

h****n48
 [?]
Sign in to view client's details.
| h****n48
|    Australia
Fixed Price: $500 - $1,000   |  Posted: May 28, 2015  |  Ends: 12d, 8h  |   2 Proposals
Looking for a quote for media outreach. I'd consider giving a percentage of raised funds if it was a good fit or an upfront fee. Tell me my otions. Ready now.
Category: Product Design       
Skills: 3D Modeling, Manufacturing Design, =       
Preferred Location: North America

7****abs
 [?]
Sign in to view client's details.
| 7****abs
Fixed Price: Not Sure   |  Posted: May 28, 2015  |  Ends: 12d, 6h  |   22 Proposals
A portable, small, table top device that holds an iPhone and rotates to allow for 360 degree picture taking. Initial deliverable is CAD files (compatible with Solidworks) of the device. Potentially interested in 3-5 different design concepts. May require iterations after I 3D print the device. Please respond with a quote for your cost and timing to deliver the files.
Category: Product Design       

J****Jim
 [?]
Sign in to view client's details.
| J****Jim
|    United States
Fixed Price: Less than $500   |  Posted: May 27, 2015  |  Ends: 12d, 5h  |   1 Proposal
I need to have a privacy screen prototype made for mobile phones. If you have any experience, please contact me.
Category: Product Design       

s****nou
 [?]
Sign in to view client's details.
| s****nou
|    United States
Fixed Price: $500 - $1,000   |  Posted: May 27, 2015  |  Ends: 11d, 23h  |   12 Proposals
  [obscured]   We have this product available from our business. A 3'x4'x5" platform that absorbs impact sound for electric drum sets. Our current problem is that these are too large and too heavy to ship across the country. As demand rises we need to find a solution to make these break down in to lightweight shippable pieces so that they can be shipped. Also we would like to be able to have the specs sent to a manufacturer. Understanding of sound isolating materials may help but not necessary. Also we will consider meeting in Los Angeles an option to show you the prototype that we have.
Category: Product Design       

r****dia
 [?]
Sign in to view client's details.
| r****dia
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job