Save this Search
     
Sort by:
  • Posted Date
Hiring Open
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 41 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
I need some one to design a custom race kart frame for me the one main thing I ask is that it can support a Suzuki gxsr 600cc engine with chain drive in the rear, it cant sit no more then 2" from the ground, I would like it to be 1.5" from the ground it will have 6" * 11" tires in the rear let me know if you can come put with a design for this I would need all of the deminsions as well also it has to support a 6' tall person
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

d****ts1
 [?]
Sign in to view client's details.
| d****ts1
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 2h, 53m ago  |  Ends: 14d, 21h  |   4 Proposals
I have an old camping coffee maker that's in need of some small updates. I need a model for prototyping purposes and ultimately manufacture. The design is very simple an consists of 4 pieces. I have several photographs, measurements and even a video. I will send you all the specifics but here is a photo the depicts roughly the design of a similar product.   [obscured]  -amazon.com/images/I/41UMoC-I1WL._SY300_.jpg Thank you for your time and I hope we can work together!
Category: Product Design       

0****ld0
 [?]
Sign in to view client's details.
| 0****ld0
|    Korea, Republic of
Hourly Rate: $5 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: 7h, 28m ago  |  Ends: 14d, 16h  |   11 Proposals
I am looking for an industrial designer to make a photo realistic prototype of a product in the consumer product space. I am looking for 2 separate designs one is integrated into an existing product the other is an add on product. I am looking for a finished product drawing as well as a blow out that shows the working parts.I will most likely need a sell sheet as well. If this moves to manufacturing then I would come back to hire the designer for full CAD's and specs.
Category: Product Design       
Skills: Autodesk Inventor, AutoCAD, SolidWorks, Autodesk       

c****d26
 [?]
Sign in to view client's details.
| c****d26
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 11h, 49m ago  |  Ends: 2d, 12h  |   5 Proposals
We are looking to create an innovative design which will incorporate a scoop into a screw on cap for powder product. The cap is a 97mm triple lead cap and the scoop is a 26.5cc scoop with a folding handle. The product it is used in is a nutritional supplement, meal replacement shake and want the customer to not have to dig through the powder to find the scoop. The product must have an induction or conduction seal present so the scoop must fit within the cap having this present and not interfere or create open seals/quality issues. Currently the scoop is manufactured seperately from the cap and still could be going forward. We are looking to see if there is some type of snap feature, locking feature, or other means of keeping the scoop secure to the cap. It must be fitted together easily, either through hand application but preferable some type of robotic assembly. We are looking for conceptual drawings, 3D models and a design that can easily be translated into a mold design and manu...
Category: Product Design       

K****erb
 [?]
Sign in to view client's details.
| K****erb
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 7-9 months  |  Posted: 13h, 48m ago  |  Ends: 29d, 10h  |   0 Proposals
ALEX - Alternative Experts, LLC is an established 8(a) Woman-Owned professional services company which was founded in 1987 and currently headquartered in Chantilly, VA. ALEX offers a wide spectrum of technical, logistical and program management solutions to fulfill program requirements, achieve greater productivity and increase competitiveness for our Federal, State and Local government as well as our commercial clients. By successfully partnering with our clients to provide superior services, cost effective and value-added solutions with the utmost of talented individuals, we have created The ALEX Advantage! Job Title: CAD Specialist Location: Arlington, VA Responsible for using Microstation, AutoCad, or Axiom software products to perform drafting, helpdesk support, and quality assurance and quality control tasks. This will include creating, drafting, modifying drawings, managing customer drawing package requests, and assuring the quality of the drawing packages being released t...
Category: CAD       
Preferred Location: North America

a****tex
 [?]
Sign in to view client's details.
| a****tex
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: 14h, 3m ago  |  Ends: 14d, 9h  |   13 Proposals
I have a product design that needs a CAD and Render. Let's start with just the CAD. This product is a heater for cell phones in cold climates. I have attached a PDF of a hand drawing to help you visualize. It will have an integrated battery, switch, and heater plate that is completely independent of the cell phone. It should meet the following requirements: - Case should snap over the phone (It doesn't have to be perfect, but please make sure the CAD can be tweaked) - Case should house a thin aluminum plate that will be crafted as the heater plate - Case should house a small lithium ion battery (dimensions provided) Once the CAD is done, if you can do a render within the given budget, go ahead and do that. The case will be 3D printed, so if you have any knowledge of that, it should help. Otherwise, all you have to do is minimize fine detail, and reduce overhangs. In this case, the overhang to allow the case to hold the phone is fine.
Category: CAD       

w****sjg
 [?]
Sign in to view client's details.
| w****sjg
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 14h, 5m ago  |  Ends: 14d, 9h  |   18 Proposals
We have Autocad Drawings in 2D, and are reading to convert our drawing sets into AutoDesk Inventor. I am looking for someone who can take these drawings and convert on an hourly quoted basis. Let me know your hourly rate and I will send drawings to be quoted.
Category: CAD       
Skills: Autodesk Inventor, AutoCAD       

B****tCo
 [?]
Sign in to view client's details.
| B****tCo
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 15h, 57m ago  |  Ends: 14d, 8h  |   11 Proposals
a plastic funnel which has threads at both ends, allowing two plastic containers to be joined and consolidate contents into one container.
Category: Product Design       

T****969
 [?]
Sign in to view client's details.
| T****969
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Jul 27, 2015  |  Ends: 13d, 20h  |   11 Proposals
I am having the circuit design ready and I am very new to Altium designer . I have tried to make the schematic diagram but do know how to make PCB layouts and use which PCB material for high frequency application. Need ur help in components layouts on PCB inorder to have minimum track length .As i will give you the schematic diagram so u can make changes in it to have minimum track length .The circuit is complex its just 9 stage villard voltage doubler......
Category: Product Design       

j****915
 [?]
Sign in to view client's details.
| j****915
|    New Zealand
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Jul 26, 2015  |  Ends: 13d, 15h  |   0 Proposals
I am looking for someone to formulate a organic beverage made with Organic Golden Monkey Tea, organic pure sugar cane and purified water. I have a sample of a competitor's tea that I can provide to you. My goal is to create a better tasting or similar tea.
Category: Product Design       

M****BOY
 [?]
Sign in to view client's details.
| M****BOY
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 26, 2015  |  Ends: 13d, 8h  |   11 Proposals
I am interested in designing and making an initial prototype of a specialized needle for head and neck injections. Ideally I'd like to have a prototype designed and made so it can be tested in animal and human cadaver studies in support of a patent application.
Category: Product Design       
Skills: Mechanical Engineering       

t****ski
 [?]
Sign in to view client's details.
| t****ski
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 26, 2015  |  Ends: 13d, 8h  |   1 Proposal
I am interested in designing and making an initial prototype of a specialized needle for head and neck injections. Ideally I'd like to have a prototype designed and made so it can be tested in animal and human cadaver studies in support of a patent application.
Category: Product Design       
Skills: Mechanical Engineering       

t****ski
 [?]
Sign in to view client's details.
| t****ski
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 26, 2015  |  Ends: 13d, 6h  |   4 Proposals
We are a product development company and need to source a reliable supplier of a specific stretchable headband. The band we are interested in has a soft, highly stretchable rubber core and sheathed in print fabric. The band expands about 300%. We require a very specific width to the rubber core. It must be 14mm wide. Looking for a suitable supply agent who can source quotes for a variety of high visibility, colorful print styles. Attached Youtube video shows an existing, common 10mm wide hair band. We need 14mm wide.   [obscured]  /watch?v=uuDES-M8t9o&feature=youtube_gdata
Category: Product Design       

p****son
 [?]
Sign in to view client's details.
| p****son
|    Bermuda
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 25, 2015  |  Ends: 12d, 14h  |   27 Proposals
AutoCAD Project Format: AutoCAD 2010 Project name: Balance Template Layout: 2D Project Scope: Develop a drawing template for an industrial balance flow diagram (PID or PFD) to be used by our field engineers. Our engineers are familiar with AutoCAD and have limited working knowledge. The field engineer would be able to use Task: To populate the AutoCAD Design Center with standard blocks and other blocks from other prints. Currently, we have blocks existing in different prints and these blocks need to be extracted from the prints and put into the NEW AutoCAD drawing template. There would no more than 20 prints that blocks would need to be extracted from and imported into the new AutoCAD drawing template.
Category: CAD       
Skills: AutoCAD       

k****fel
 [?]
Sign in to view client's details.
| k****fel
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 24, 2015  |  Ends: 11d, 12h  |   26 Proposals
We're a small company in Maine getting ready to put a new product into production, we need to do GD&T on our existing drawings and find ourselves short on time and looking to outsource the work. We would prefer someone local, but are open.
Category: CAD       
Preferred Location: United States

Z****ity
 [?]
Sign in to view client's details.
| Z****ity
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: Jul 24, 2015  |  Ends: 26d, 8h  |   25 Proposals
I am currently looking to hire an experienced (minimum 6 yrs) contract engineer for designing a product from concept to full scale production. The anticipated design time in 3 calendar months, starting August 21, 2015. Below are the requirements and tasks expected of the engineer: Candidate will be tasked to design CAD models for concept development of a product, based on evolving requirements. Must employ sound engineering analysis to confirm structural and mechanical capability of a product. Must be able to develop testing procedures to test prototypes of a designed product. Accurate data and engineering decisions must be logged on consistent basis. Cost is a driving factor and must adhere to a budget to deliver design(s). Candidate will be responsible for releasing final drawings for fabrication. He/She will be tasked to support volume production of design after development and testing. Candidate must be able to work remotely most of the time and effectively communicate pro...
Category: Product Design       
Preferred Location: United States

P****e71
 [?]
Sign in to view client's details.
| P****e71
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Jul 24, 2015  |  Ends: 86d, 6h  |   4 Proposals
I can solve tasks from Mathematic step by step and send to you as pdf Integration by parts u-substitution Reverse chain rule Integration using trigonometric identities Trigonometric substitution Division and partial fraction expansion and Differetials
Category: CAD       

q****ros
 [?]
Sign in to view client's details.
| q****ros
|    Serbia
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: Jul 24, 2015  |  Ends: 11d, 4h  |   2 Proposals
We have a website in the dating vertical coded in PHP. would like to rework it and tweak the backend. Looking for web dev and web design
Category: Product Design       

f****123
 [?]
Sign in to view client's details.
| f****123
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 24, 2015  |  Ends: 11d, 2h  |   20 Proposals
I am seeking a professional to draft CAD and art per Provisional Patent Application and ultimate manufacture of prototype for new product developing for the Bath/Beauty Market. Must have experience in this field, and work affordably. Please contact me to discuss, and moving forward, sign a non-disclosure agreement, and we can get going!
Category: Product Design       

C****484
 [?]
Sign in to view client's details.
| C****484
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 24, 2015  |  Ends: 86d, 0h  |   18 Proposals
We have a requirement for conversion of drawings into Autocad. We require about 3,000 drawings converted. Candidates MUST have experience in Cement & Earth Moving Industries. Please do not apply if you can not demonstrate this. Please submit your most detailed technical proposal upon which we will short list candidates and give a (paid) trial job to a few before the final project award. We are looking for you to differentiate yourself in the technical proposal, therefore please be as detailed as possible. Thanks & Good Luck
Category: CAD       
Skills: AutoCAD       

m****dia
 [?]
Sign in to view client's details.
| m****dia
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 24, 2015  |  Ends: 10d, 22h  |   41 Proposals
I am looking to get some 3D drawings for a prototype project. I am looking for someone that will give input to the project and someone who has mechanical knowledge of pulley systems and gear arrangements.
Category: Product Design       

S****e07
 [?]
Sign in to view client's details.
| S****e07
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 9d, 11h  |   9 Proposals
My company markets various consumer products, primarily low-tech electronics such as flashlights, lanterns, various LED lighting (decorative, seasonal), occasional furniture, hand tools and implements. Need some mechanical/industrial design assistance to refine/modify/update/stylize products selected from Asian manufacturing partners. Some graphic art assistance would be a welcome additional skill set as well as some photo-realistic imaging. Have competent Chinese engineers at my factories to execute these modifications, the creation of which, however, is beyond their capabilities. San Diego domiciled freelancer desired.
Category: Product Design       
Skills: AutoCAD, Product Design       

n****nor
 [?]
Sign in to view client's details.
| n****nor
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 9d, 11h  |   22 Proposals
SnapBack Corporation I have a concept for a new niche product that I would like to continue designing, sourcing and manufacturing. I have already done one round of schematics with an engineer but would like to further develop the product. Also as tooling for a completely new product may be cost prohibitive, I would also like to see if making smaller improvements through new custom design elements may be cost effective combined with an existing off the shelf product. I am open to all forms of creative product ideas. If we don't need to reinvent the wheel, let's not. My prototypes to date have been off the shelf product that I have retooled. I'm open to investigating whether or not a custom solution is best. If again we can solve the product issues through existing products and custom assembly then that might be the best way to get the product launched and off the ground. The custom solution may come later due to cost constraints and a viable product market. Translation; le...
Category: Product Design       

w****ore
 [?]
Sign in to view client's details.
| w****ore
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 9d, 11h  |   7 Proposals
We are looking to hire someone experienced in: Casting, mold making, Local to Southern California. We want to cast an item, make a mold, and make a only a few copies of said item. If you or someone you know if Experienced to build the box, cast the part, etc, we'd like have some work for you. thank you.
Category: Product Design       

M****e-M
 [?]
Sign in to view client's details.
| M****e-M
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 9d, 9h  |   26 Proposals
We need to have a technical CAD drawing of a small plastic part we need manufactured. This part will probably be made by plastic injection molding. The part exists and we can send it to you to create the drawing. See attached photo. Also needed is an actual RFQ based off your drawing that we can send to manufacturing companies. Thank you
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       
Preferred Location: United States

P****LLC
 [?]
Sign in to view client's details.
| P****LLC
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job