Save this Search
     

All JobsEngineering & ManufacturingProduct DesignCADHourly

 (6,923 results)  
Sort by:
  • Posted Date
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: 6h, 36m ago  |  Ends: 14d, 17h  |   2 Proposals
Hi there, Our client is a manufacturer of kitchenware, and we are looking for a industry designer specialize in non-stick pan designing, we will be consulting for some advises towards non-stick pan design. It will be ideal if you are based in Canada or North America. It'd be better if you are experienced or we also can get some fresh idea from you. Feel free to summit your proposal. This project will lead to a long term corporation if satisfied. (We may ask for your LinkedIn pages to know more about you.)
Category: Product Design       
Preferred Location: North America

r****yxu
 [?]
Sign in to view client's details.
| r****yxu
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 30, 2015  |  Ends: 13d, 9h  |   15 Proposals
Hi, I have with me a PCB design created for me, but I wish to have an consultation with an expert on the design to ensure it is robust enough before I take it to the Gerber design stage. The design is for an Emergency light PCB control which will switch to battery mode when the supply has been cut. Let me know should you be interested and I shall revert with more details. I am fine on hourly rate, but I also wish to chat online and discuss to go thru any doubts. Thank you. Lee Han Pin
Category: Product Design       
Skills: Manufacturing Design, Electronics       

H****pin
 [?]
Sign in to view client's details.
| H****pin
|    Singapore
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: Aug 29, 2015  |  Ends: 58d, 2h  |   6 Proposals
Task: I am looking to design a foldable yoga mat. The shape of the yoga mat has to be rectangular. The product: on one side there is the mat and on the other there will be a fabric coat that once, folded will serve as the outside of a bag. Prefer: beautiful design and compactness. Could you do three different models, one with beautiful design, one that is compact and one that has both elements? Mat material: TBA (100% natural rubber, PVC etc.) Please let me know if you have any questions and reply to confirm the receipt of this e-mail. This assignment should not take more than 45 minutes- 1 hr.
Category: Product Design       

s****er1
 [?]
Sign in to view client's details.
| s****er1 *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 29, 2015  |  Ends: 12d, 23h  |   22 Proposals
Design a simple farm produce sorting machine. I have already built a rough prototype, but now need a properly engineered, and built machine, for showmanship purposes. The machine is all mechanical expect for some electrical motors.
Category: Product Design       
Preferred Location: Canada

M****y11
 [?]
Sign in to view client's details.
| M****y11
|    Canada
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Aug 27, 2015  |  Ends: 26d, 1h  |   10 Proposals
Looking to manufacture custom hardware, brass, zinc, stainless, aluminum, etc. will need samples and prototype quickly. Looking for top quality only, honest and reliable.
Category: Product Design       
Preferred Location: United States

P****ere
 [?]
Sign in to view client's details.
| P****ere
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 27, 2015  |  Ends: 10d, 16h  |   24 Proposals
Hi, I have with me a PCB design created for me, but I wish to have an consultation with an expert on the design to ensure it is robust enough before I take it to the Gerber design stage. The design is for an Emergency light PCB control which will switch to battery mode when the supply has been cut. Let me know should you be interested and I shall revert with more details. I am fine on hourly rate, but I also wish to chat online and discuss to go thru any doubts. Thank you. Lee Han Pin
Category: Product Design       
Skills: Manufacturing Design, Electronics       

H****pin
 [?]
Sign in to view client's details.
| H****pin
|    Singapore
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: Aug 27, 2015  |  Ends: 10d, 4h  |   3 Proposals
Looking for the Hi-Fi Engineer to design an Audio Hi-Fi VU meter with the Following requirements: 9.1 Independent Analog Input Channels, RCA, XLR, Banana, Etc 9.1 Vu Meters/leds ( 1 per input ) Can use a DSP for Functions Like: Input Level, Input Detect: Peak, RMS Dimmer Response Speed. Your Job here will be to design the Electronic Part using from the shelf Components, write code is a plus. NDA and Contract will be required, If interested please send your information for NDA. Project design Price to be determined
Category: CAD       

e****ico
 [?]
Sign in to view client's details.
| e****ico *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 10d, 2h  |   22 Proposals
We need a drawing of a curved wireframe that we've already drawn in autocad 3d to be plotted onto approximately (30) PDF full size plots ready to be printed in 1:1 scale on 36" paper. We will give you an autocad file and we need each section of frame to be rotated into a plan view and an elevation view and plotted as a pdf. Please give us an hourly rate an an estimate per finished PDF plot. Thanks for bidding!
Category: CAD       
Skills: 3D Modeling, AutoCAD       

L****ive
 [?]
Sign in to view client's details.
| L****ive
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Closed  |   8 Proposals
Start-up company needing services from ideation to production for a beach sandal company. Currently in the initial stages of the process. The beach sandal company will strive to be eco-friendly but fashion forward. We would like to utilize recycled products.
Category: Product Design       

j****v10
 [?]
Sign in to view client's details.
| j****v10
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 9d, 22h  |   2 Proposals
Start-up company needing services from ideation to production for a beach sandal company. Currently in the initial stages of the process. The beach sandal company will strive to be eco-friendly but fashion forward. We would like to utilize recycled products. We are looking to hire someone that has expertise in finding a manufacturer that fits our needs. We would like to manufacture in the USA.
Category: Product Design       

j****v10
 [?]
Sign in to view client's details.
| j****v10
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Closed  |   3 Proposals
We need to have a technical CAD drawing of a small plastic part we need manufactured. This part will probably be made by plastic injection molding. The part exists and we can send it to you to create the drawing. See attached photo. Also needed is an actual RFQ based off your drawing that we can send to manufacturing companies
Category: CAD       
Skills: Computer-Aided Design       

P****LLC
 [?]
Sign in to view client's details.
| P****LLC
|    United States
Hourly Rate: $40 - $50 / hr   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 9d, 7h  |   16 Proposals
Need a Civil Engineer or Land Surveyor who can provide simple corrections on the parcel "Final Map" er Town of Mammoth Lakes Surveyor "Comments" and who can later sign the map before is recorded.
Category: CAD       
Skills: Engineering drawing       
Preferred Location: United States

O****aLA
 [?]
Sign in to view client's details.
| O****aLA
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 25, 2015  |  Ends: 8d, 17h  |   12 Proposals
We are working on 3 bracelets in the shape of the US state 'Florida'. I labeled them A , B & C. I will send you the pictures with spec's. Thanks!
Category: CAD       
Skills: 3D Modeling       

s****dem
 [?]
Sign in to view client's details.
| s****dem
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 25, 2015  |  Ends: 8d, 16h  |   1 Proposal
Dear Sir or Madam, I am looking for a Houston area ONLY local engineering group or engineer to observe and supervise testing at my Houston (Spring Branch) facility of a door security product to ASTM F476 (latest ver. attached). The project would require: ? some minimal initial consultancy with a site visit to inspect the construction of the test assembly and go over test day particulars, ? a visit on the test day, supervision of the actual short test (est.1/2 Day), recording of results including a failure analysis (if applicable), and ? a written report on the test and its results. This is a fun quick test for which you may wish to be paid a flat rate. Or we can engage you hourly. There may be subsequent rounds of test work or other product design or CAD work depending on your skills. Thanks in advance for your consideration, Harper Jones JONES MANUFACTURING SERVICES LLC 1511 Bingle Rd. Ste D-8 Houston Texas 77055 713.392.6990   [obscured]  
Category: Product Design       

h****s69
 [?]
Sign in to view client's details.
| h****s69
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 25, 2015  |  Closed  |   1 Proposal
I am looking for an efficient medical researcher and document producer to assist me in gathering details about my formulation for a pain relief product in order to comply with TGA requirements in Australia as a listed medicine. 1. You need to review the ingredients and levels of ingredients in order to be able to complete the project. 2. I will need you to research and provide 3-5 primary clinical studies and 2-3 secondary studies (complete with research references) that support our claims on each of our active ingredients in our product. This is to be presented by way of a table of evidence in place for these claims and indications either based on traditional or scientific evidence which will relate back to the claims being made and the quantitative formulation that I am wanting to list with the TGA (in Australia)as a listed medicine. As a matter of course you will be required to sign a non-disclosure agreement in order for this project to proceed and I will provide you with mor...
Category: Product Design       

T****kat
 [?]
Sign in to view client's details.
| T****kat
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 24, 2015  |  Ends: 8d, 3h  |   41 Proposals
Looking for someone to use for the long term. We need steel shed and similar structures drawn up. We need presentation drawings for clients, drawings for engineers and workshop drawings. Currently have 1 size in our range and looking to greatly expand it and will be constantly adding to it. Having a system where roof sheets, purlins, rafters and brackets are already in there is a plus, so dont have to design each structure individually Prefer if use a program that would link with Solid edge as we use this in house to qualify i will need you to show examples of work you have done using rafters, purlin, roof sheet and bracketry of commercial structures
Category: Product Design       

d****cs1
 [?]
Sign in to view client's details.
| d****cs1
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 24, 2015  |  Ends: 8d, 0h  |   26 Proposals
We are in need of a quick round of ID concepting for a vapor product that is about to be released. The product is modular, and the components that we will ask you to review will be flat plates. We are looking to add texture and break up the bland look, so you can design with CNC machining and plastic molding in mind. We will need the concepting turned around by the week's end. Our site is cloudmakertech.com - you can find the product images here. Please let me know of any questions.
Category: Product Design       

j****oce
 [?]
Sign in to view client's details.
| j****oce
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 23, 2015  |  Ends: 7d, 3h  |   15 Proposals
I have a rough design for a medical garment that i want to design, model, prototype and take into production
Category: Product Design       

e****sio
 [?]
Sign in to view client's details.
| e****sio
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 23, 2015  |  Ends: 6d, 14h  |   40 Proposals
Hi were looking to create a new type of speaker with an amazing addition that would make the product great. We are a team that knows how to promote a product, and looking for someone who can make the prototype to send to china.
Category: Product Design       

Y****sin
 [?]
Sign in to view client's details.
| Y****sin
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 23, 2015  |  Ends: 6d, 4h  |   15 Proposals
Good Evening, I have a patent pending on a product that needs to be turned into a working prototype. The product is a fairly simple concept using a D battery for power source, a motion sensor (short range 180 degree spread x 14 inch range) operate a mini linear solenoid actuator or miniature push type plunger that would activate a pressure aerosol container. The elements will all need to be contained with-in a 1 3/4" x 2" x 15" plastic chaste. I see that you can produce drawings, will they be working drawings that can be sent to a manufacturer for pricing estimates (plastic mold). I have a contact that works with plastics in Philadelphia .. but have no source the other items needed except web based purchasing. In other words, how far can you take the product if we can agree on the design? Look forward to opening up a conversation if you are interested and able. Thank you in advance for your time. Jeff Tucker
Category: Product Design       

t****098
 [?]
Sign in to view client's details.
| t****098
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Aug 22, 2015  |  Closed  |   3 Proposals
I want to get a 3D Design I can send to a manufacturer. I want a pair of boxing gloves equipped with sensor type pads underneath the leather surface or inside foam insulation on fist part of glove. I want digital counter install on wrist part of glove. The sensor pads are in place to track punch count. Every time Glove hit an object (heavy bag, pads) it will register a number in numeric order on digital counter that will be located on wrist part of gloves. There might need to be a wire or something that need to connect from Sensor Pads to Digital Counter or a wireless/remote type sensor. I need a layered design so manufacturer can see the order of the materials Order from top of glove (Fist part) 1.Leather (Outside of glove) 2.Thin Foam or Cotton (inside) 3. Sensor Pads (inside) 4. Foam or Cotton (inside) 5. Leather (Outside of Glove) Digital Counter on wrist part of glove. Headgear will be similar.. I will need a 3D design for headgear Sensors pads will be in both cheeks,...
Category: Product Design       

d****man
 [?]
Sign in to view client's details.
| d****man
|    United States
Hourly Rate: $40 - $50 / hr   |  Duration: Not Sure  |  Posted: Aug 21, 2015  |  Ends: 5d, 1h  |   38 Proposals
I'm looking for an innovative chair back and armrest design. I'm creating a unique chair product and I need a backrest that can be height adjusted about 14" (7" higher and 7" lower from starting location.) The chair back is connected to a frame that also supports 2 arm rests (one on each side, obviously). The armrests also need to be height adjustable, approximately the same range as the backrest (about 14") but they need to be adjustable independently of the backrest. This is the general requirement, but I will send the winning proposals my drawings and complete details of the existing product so far so you can see what the constraints are, etc. I don't want to divulge too much yet, but I will provide the successful candidate(s) with complete information and everything you need. The goal is to find an easy solution to this problem, and one that isn't complicated to manufacture.
Category: Product Design       

w****ger
 [?]
Sign in to view client's details.
| w****ger
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 21, 2015  |  Closed  |   13 Proposals
We need to scale architectural/ autodcad drawings of our building and the changes we are making to pass permitting. It is a 1 story 1900 sq foot building, there are no major or structural changes. This is a high priority job
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

j****cas
 [?]
Sign in to view client's details.
| j****cas
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job