Save this Search
     
Sort by:
  • Posted Date
Time Left: Less than 7 days
Hourly Rate: Less than $10 / hr   |  Duration: 7-9 months  |  Posted: 5h, 11m ago  |  Ends: 6d, 18h  |   6 Proposals
I am looking for a professional able to: - modify/amend electronic schematics - optimize BOM - route PCB up to 6 layers with ability to comply with standard pool manufactring (Eurocircuits.com) - generate GERBER files, loaded into manuffacturer web site with no errors - knowledge of impedancy, currents, complex components required. Regards
Category: Product Design       
Skills: Electronic Design, PCB Design, gerber       

D****MY1
 [?]
Sign in to view client's details.
| D****MY1
|    Spain
Hourly Rate: $15 - $20 / hr   |  Duration: 1-3 months  |  Posted: May 16, 2015  |  Ends: 6d, 23h  |   22 Proposals
Revit 2015 & AutoCAD Proficiency is a must ? Orange County, CA firm seeks a part time, work from home operator for various design consulting projects. Candidates must have a solid understanding of collaboration in Revit 2015 and as an AutoCAD drafter for systems design and or similar type of work. Candidates must have experience with, or a working knowledge of, MS Office (Word, Excel, and Outlook). Candidates must be able to follow directions from Lead Designers, take red lines to black, work from sketches, set up borders, layers and title blocks in AutoCAD and set up projects, views and sheets in Revit, enable all required linking and work with families.
Category: CAD       
Skills: AutoCAD, AutoDesk Revit       

P****ins
 [?]
Sign in to view client's details.
| P****ins
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 16, 2015  |  Ends: 6d, 19h  |   2 Proposals
Very experienced and proficient Cobbler/Shoemaker with own work space and all necessary tools to make 4 pairs of a hybrid sneaker. Must be able to interpret and translate original completed prototype from Solid Works. The original design was created in Solid Works around a custom last that we have. Must be able to use and manipulate different materials, sewing and adhesive techniques. We prefer to work with the contractor so the closer to South Florida the better.
Category: Product Design       
Preferred Location: United States

3****RMG
 [?]
Sign in to view client's details.
| 3****RMG
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 16, 2015  |  Ends: 6d, 7h  |   6 Proposals
See rack elevation. Would need drawings changed based on comments for rack elevations. Also drawings sized to full set drawings and company logo placed on all drawings. Attached are the rack drawings The drawings for the racks are done in Visio. The main rack for the recorder would be A98. So moving recorder from B97 to A98. Amps that need to be grouped together in A97 are Lab Gruppen C48:4 Lab Gruppen C48:4 Lab Gruppen FP4000 Lab Gruppen C28:4 Lab Gruppen C28:4 Lab Gruppen C48:4 Lab Gruppen E12:2 Lab Gruppen E12:2 Lab Gruppen C28:4 Lab Gruppen C28:4 Lab Gruppen C28:4 Lab Gruppen FP4000 See all changes on drawings.
Category: CAD       

T****MGM
 [?]
Sign in to view client's details.
| T****MGM
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 15, 2015  |  Ends: 5d, 22h  |   48 Proposals
Need someone to covert files from 2014 to 2011 and verify that it opens successfully in 2012. Let me know the cost to covert.
Category: CAD       

T****MGM
 [?]
Sign in to view client's details.
| T****MGM
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: May 15, 2015  |  Ends: 5d, 16h  |   12 Proposals
I am a Solidworks user and am having issues creating the seating part of a chair using the loft command and am hoping someone can assist me with this. I have attached some images of the chairs I would like to reference and have made notes on how I would like this done. It will be a combination specific sections of each of these chair and it needs to be done in Solidworks. I have also attached the profile dimensions. I would like the width of the front of the chair to be no more than 30 inches.
Category: CAD       
Skills: SolidWorks, 3D Design       

D****ign
 [?]
Sign in to view client's details.
| D****ign
|    United States
Hourly Rate: Not Sure   |  Duration: 4-6 months  |  Posted: May 15, 2015  |  Ends: 5d, 12h  |   28 Proposals
Who We Are? We are a dynamic start-up company that are at the forefront of creating disruptive technology. Technology that will change the whole concept of "personal transportation" forever. Founded in 2013 by a true visionary and innovator, we have grown exponentially since our inception and are at the crest of a huge wave within our respective area of technology. We are always on the lookout for like-minded and creative individuals. Individuals that want to be part of something unique, fun, and truly inspirational. What we do? Essentially one of our key areas is to produce and sell innovative gyro-stabilized electric personal transportation devices. Devices that will add huge enhancements to a consumer's everyday life? Think Segway and then think even further? a product that is significantly smaller, exciting and incredibly fun to use ? that's what we do, we create the next wave of innovative consumer products that will change the face of tomorrow. As a high tech incuba...
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, CAD/AutoCAD       
Preferred Location: United Kingdom

C****P42
 [?]
Sign in to view client's details.
| C****P42
|    United Kingdom
Hourly Rate: More than $50 / hr   |  Duration: Not Sure  |  Posted: May 15, 2015  |  Ends: 5d, 6h  |   29 Proposals
Hey there, Looking for someone to assist in a two phase project for a re-design of a manufacturing line commodity bin. Objective #1, incremental improvement. Objective #2 breakthrough improvement. It's not the sexiest product currently on the market but it's widely used by most of the largest global companies and end users are begging to see something different. If you are interested in learning more, let me know. Thanks, JL
Category: Product Design       

j****er1
 [?]
Sign in to view client's details.
| j****er1
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 14, 2015  |  Ends: 5d, 5h  |   8 Proposals
In need of someone to modify existing Rack Elevation and Control Room drawings. Will provide rack cutsheets for Control Room and existing rack drawings.
Category: CAD       

T****MGM
 [?]
Sign in to view client's details.
| T****MGM
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 14, 2015  |  Ends: 5d, 5h  |   8 Proposals
I have a 3 wire diagram that I need to have copied from an existing file. Files are in PDF and need to be re-done. Also need placement of company border, that will be provided. Also page sizing will also be provided.
Category: CAD       

T****MGM
 [?]
Sign in to view client's details.
| T****MGM *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 14, 2015  |  Ends: 5d, 5h  |   8 Proposals
We have an Audio Visual Job that need revisions, which include: - Changes to drawings - Adding racks in control room - Label wiring which correspond to panel drawing - Changes to panel drawings - Insert new Crestron drawing which will be provided. - Resized drawings to be the same size - Resize font - Eliminate pages - Insert company border on pages that don't have them. Border will be provided - Recreate 3 wire diagram Must have experience in AutoCad and preferable Visio. Let us know if you are interested.
Category: CAD       

T****MGM
 [?]
Sign in to view client's details.
| T****MGM
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 14, 2015  |  Ends: 5d, 2h  |   23 Proposals
Hi there, We run a science enrichment program and in the course of our work we have developed numerous toys that we use in our program. We know the kids (our clients) like them because when the toys break the children come back and ask us to fix them. We have also sold some kits that we put together. We are looking for someone to help us take these projects that we have developed in-house and turn them into products. We are looking for someone interested in working with simple materials, has some experience with electronics and likes to think out of the box. Some of our projects are made of cardboard, paper and so an interest in folding and working with cardboard is desired. We need to solve some design issues in taking this to market. We are interested in simple clean design. We have a web site with some samples of our work and will share information with interested designers.
Category: Product Design       

s****cts
 [?]
Sign in to view client's details.
| s****cts
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: May 14, 2015  |  Ends: 5d, 1h  |   2 Proposals
The screen size is from 8-11" inches big and it will have a capacitive or resistive touchscreen to be used with a pen. Resolution does not need to be high. And grayscale or simply black and white is enough. The finger and hands of the user will not have any effect on the screen. By using the pen we can draw on the screen. The pen should be adequate to the type of touchscreen (capacitive or resistive) The drawings on the screen will stay for as long as possible by means of a small battery so count on 1mAh or so but we can go higher for an initial stage. I depends on the whole system consumption so try to choose low power components. There will be a reset button and when pressed the screen is cleaned and all info is erased. Before erasing the screen the information should be stored in memory. A second button will be used to show the stored drawing in memory back on the screen. Any subsequent reset will overwrite the memory info with the info on the screen at the time the button...
Category: Product Design       

c****ang
 [?]
Sign in to view client's details.
| c****ang
|    China
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 14, 2015  |  Ends: 4d, 23h  |   7 Proposals
I want to build a true italian brick oven at home and I need to prepare autocad blueprints. I basically want to replicate the oven shown in the attached document. I need both the blue prints of the structure and the actual design of the oven. The oven will be made with bricks from   [obscured]  /fara.swf The guys at this factory are willing to cut the bricks per our requirements (always from their standard measures) It's a plus if italian is understood (  [obscured]  /?t=66051200)
Category: CAD       
Skills: Architecture, AutoCAD, Engineering Design       

r****roy
 [?]
Sign in to view client's details.
| r****roy
|    Argentina
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 14, 2015  |  Ends: 4d, 16h  |   29 Proposals
need drawing done on side plate from sketch to completed drawing. Need in solidworks format to have sent to laser cutting
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

S****079
 [?]
Sign in to view client's details.
| S****079
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 13, 2015  |  Ends: 4d, 5h  |   18 Proposals
I am looking for a product design and 2D mechanical design with prototyping for a travel accessory for use with electronic gadgets.
Category: Product Design       
Preferred Location: India/Southern Asia, Eastern Asia

v****whk
 [?]
Sign in to view client's details.
| v****whk
|    Hong Kong SAR, PRC
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 13, 2015  |  Ends: 3d, 23h  |   45 Proposals
I have a 3D printer and need someone to design a prototype using a 3D design software, and whatever else is needed to take something from ideation to printing. I will handle printing. It's nothing electrical, or intricate
Category: CAD       
Skills: 3D Modeling, AutoCAD, Electrical Engineering       

m****ing
 [?]
Sign in to view client's details.
| m****ing
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 13, 2015  |  Ends: 3d, 16h  |   19 Proposals
I am developing a strap to be used by individuals with weak grip strength to hold utensils and other objects used for eating, writing or painting. I have a rough draft of the product as well as the material specified, but I need fully dimensioned drawings to finalize tooling. The part will be injection molded from an FDA approved Silicon, so experience with Injection Molding and Silicon based materials is preferred. I am looking for someone that can help me with final design changes and produce the fully dimensioned drawings.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       
Preferred Location: United States

d****ndo
 [?]
Sign in to view client's details.
| d****ndo
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: May 12, 2015  |  Ends: 3d, 1h  |   9 Proposals
Objective: To create a small but sturdy camera hot shoe accessory designed around internal parts (still in progress). The hot shoe dimensions and specifications need to meet the standards for Canon and Nikon, so two variations will need to be designed. More than likely an injected molded plastic housing that will consists of two halves and a clear lens in the front. Similar to a TV remote, but smaller. This will also need to have small metal parts for the hot shoe. Please view the attached files for a similar designed product made v\by Pocket Wizard.
Category: Product Design       
Preferred Location: North America

c****ydw
 [?]
Sign in to view client's details.
| c****ydw *
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: May 12, 2015  |  Ends: 2d, 21h  |   29 Proposals
We are a vehicle upfitter, we install wall liners and floors in vans along with shelving. For the walls and floors, we have templates that we use and trace it on to a the raw material and then cut it. We are looking to have all the templates turned into CADs as we are looking to get a CNC route
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, 3D Design, 2D Design       

l****ham
 [?]
Sign in to view client's details.
| l****ham
|    United States
Hourly Rate: $15 - $30 / hr   |  Duration: 3-4 weeks  |  Posted: May 12, 2015  |  Ends: 2d, 19h  |   14 Proposals
Looking for homegoods product designer to assist with Spec Packs and Prototype drawings for iron/glass/leather products.
Category: Product Design       

a****ane
 [?]
Sign in to view client's details.
| a****ane
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 4-6 months  |  Posted: May 11, 2015  |  Ends: 1d, 22h  |   10 Proposals
Work on existing automotive related Solid edge files modifying the shape of an award winning suspension and chassis system.
Category: Product Design       
Preferred Location: Ukraine

t****ros
 [?]
Sign in to view client's details.
| t****ros
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: May 11, 2015  |  Ends: 1d, 21h  |   6 Proposals
Hello Mr. Mahler, I want to know if you can provide me with a slick alternative approach to what other major headset companies have in the market place. I want a product concept that can equal or surpass the kind of "Coolness" factor of Beats by Dre. and 50 Cent's SMS Audio company. I await to hear from you, thank you for your time. Kind Regards, Luis Santos
Category: Product Design       

S****s29
 [?]
Sign in to view client's details.
| S****s29
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 11, 2015  |  Ends: 1d, 21h  |   11 Proposals
Looking for an experienced Design Engineer in the Detroit Metropolitan area with knowledge of CATIA V5 and Reverse Engineering. Work to be done is as follows. This will comprise of all components of The Cool Green Machine: Lid, Handle, inner liner, outer shell, coolant reservoir, battery, pump, fan, switch port, recharging port, front covering containing louvers, and louvers.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       
Preferred Location: United States

V****eil
 [?]
Sign in to view client's details.
| V****eil
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job