Save this Search
     

All JobsEngineering & ManufacturingProduct DesignCAD

 (18,023 results)  
Sort by:
  • Posted Date
Fixed Price: Not Sure   |  Posted: Jun 29, 2015  |  Ends: 12d, 20h  |   38 Proposals
Looking for a skilled industrial product designer to design a plastic wine rack type product. Designer must also be skilled in photolistic product renderings. If this project works out, we will bring you on full-time for numerous other projects.
Category: Product Design       

r****968
 [?]
Sign in to view client's details.
| r****968
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Jun 29, 2015  |  Ends: 19h, 19m  |   44 Proposals
We have an existing product that has grown over time from a set of basic drawings into something more complex, and now need to create a new set of CAD drawings for outsourced costing and manufacture.
Category: CAD       
Preferred Location: United Kingdom

s****son
 [?]
Sign in to view client's details.
| s****son
|    United Kingdom
Fixed Price: Less than $500   |  Posted: Jun 29, 2015  |  Ends: 17h, 33m  |   37 Proposals
Hi there, we need an awesome AutoCAD geek for designing a little piece of hardware with a PCB inside. The model will then be used for molding (Polycarbonate) We believe this job won't take longer than a day. We know, we know, it's just a small job, but hopefully there's gonna be more for the future. Details on request.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

S****men
 [?]
Sign in to view client's details.
| S****men
|    Germany
Fixed Price: Not Sure   |  Posted: Jun 28, 2015  |  Ends: 12d, 11h  |   18 Proposals
Hello! I have a built a prototype for a bed frame and I want to have it produced by others. I need drawings made up to give to the manufacturer. I will provide photos of the prototype and hand sketches showing the dimensions. It is solid wood. No particle board or other such manufactured wood products. I need from the designer: 1. Drawings to provide the manufacturers for bids and construction 2. Creative input on how to make the bed easier to manufacture. 3. Input on how to make the bed less expensive to manufacture. 4. Input on how to make the bed easier for the consumer to assemble. Start date is not critical and delivery date is flexible. Thanks! Andy
Category: CAD       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       

A****Kas
 [?]
Sign in to view client's details.
| A****Kas
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 28, 2015  |  Ends: 4d, 5h  |   52 Proposals
I need someone to take my "technical" drawings, specifications, and ideas and turn them into CAD drawings that I can submit for prototyping and manufacturing. I've provided 85% of what is needed, I just lack the skill to get that last 15% done. There will be some assistance needed from you to determine fabrication material and tolerances. Currently, I have 8 drawings showing every component of the device and can work daily with you on any questions or specifics you need from me to complete the project. I would prefer someone to provide an hourly rate bid then we can discuss how many hours you will need to complete once you have had a chance to review the drawings and the scope of the project. I'm mechanically inclined, and have taken some engineering courses so I'll be able to partner with you until we get it right. If all goes well, future work can be awarded to you on a project by project basis. While timelines are fluctuating, I'd like to get the project started b...
Category: CAD       
Skills: AutoCAD, Manufacturing Design       

K****nis
 [?]
Sign in to view client's details.
| K****nis
|    United States
Fixed Price: $25 - $26   |  Posted: Jun 28, 2015  |  Ends: 12d, 4h  |   3 Proposals
Hi, I need you to source a company that can build me a custom LED to meet the exact spec below. I cannot accept anything different from the below specs so please do not ask if something similar will work. I am looking to buy 500 - 1000 that meet the below specs for prototyping in July and then 250 000 - 300 000 for our first 1000 unit production run in Sept. of our new product line. This SMD LED is not available as an off shelf product product so you will need to find a company who can build one to meet these specs. If you have no experience in sourcing or SMDs or LEDs do not apply for this job as you will be wasting your time and mine. Target Price Per Piece in USD - $0.05 SPECS a. 5mW Output b. 680nm +/- 5 bandwidth c. undiffused beam and uncollimated d. Continuous wave e. Less than 1 degree Temperature Change during 20 minute continuous operation f. No coverings over laser - EX: Lens Cap g. 2.1V, 8mA input Thank you, Mitchell
Category: Product Design       

R****met
 [?]
Sign in to view client's details.
| R****met
|    Canada
Fixed Price: Not Sure   |  Posted: Jun 28, 2015  |  Ends: 12d, 4h  |   7 Proposals
GOT Interface ? Request For Quotation Design Proposal GOT-20150626-010 Solidworks Modeling and Altium FPC Layout Phase I Design Objective ? ? Create 3D Solidworks parts (surface models) of seven (7) Flexible Circuits GOT-01400467-18 Rev C 6-25-15 Model.dwg for 2D dimensional data ? Incorporate these seven (7) FC into an existing 3D Solidworks assembly ? Using the FC connectors as reference points, create a Solidworks part (surface model) for a Main Interconnect Flexible Circuit, see GOT-01400467-18 Rev C 6-25-15 Model.dwg for reference. ? Complete a tolerance stack analysis of these two parts in the assembly and correct any issues in the Main Interconnect Flexible Circuit. This tolerance stack up will need to take into account the placement variability of the seven (7) Flexible Circuits in the front cover. ? Create 2D dimensioned pdf and a .dxf FPC Layout control drawing for the Main Interconnect Flexible Circuit. Input Deliverables ? ? Enclosure Solidworks Assembly model ? Flexibl...
Category: Product Design       

d****iba
 [?]
Sign in to view client's details.
| d****iba
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 28, 2015  |  Ends: 12d, 4h  |   3 Proposals
We're launching a new pet food company in 2016, and we're looking for someone who has experience in some, if not all of the following areas: - Food/Pet Food product formulation (with targeted protein, fat, and vitamin levels) - Low acid retort production - Production process validation - Product quality assurance/testing - Sourcing/Procurement - Co-packer management Assuming initial projects go well, we'd like for this to be a an ongoing partnership with additional small and large projects.
Category: Product Design       
Skills: Manufacturing Design       
Preferred Location: North America

S****ets
 [?]
Sign in to view client's details.
| S****ets
|    United States
Fixed Price: Not Sure   |  Posted: Jun 28, 2015  |  Closed  |   0 Proposals
We're launching a new pet food company in 2016, and we're looking for someone who has experience in some, if not all of the following areas: - Food/Pet Food product formulation (with targeted protein, fat, and vitamin levels) - Low acid retort production - Production process validation - Product quality assurance/testing - Sourcing/Procurement - Co-packer management Assuming initial projects go well, we'd like for this to be a an ongoing partnership with additional small and large projects.
Category: Product Design       
Skills: Manufacturing Design       
Preferred Location: North America

S****ets
 [?]
Sign in to view client's details.
| S****ets
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 28, 2015  |  Closed  |   57 Proposals
I have several pictures of house plans with dimensions. I would like to have a CAD file created that I can open in either freecad or librecad for printing.
Category: CAD       

****
 [?]
Sign in to view client's details.
| Client
|    United States
Fixed Price: Less than $500   |  Posted: Jun 28, 2015  |  Ends: 3d, 23h  |   10 Proposals
I would like for someone to design an apparatus that would attach to a squat rack with a J-hook attachment and remain very stable once in place. Essentially the device will be built off of a J -hook. see photo of the J hook attached. The apparatus should have two pads 24 inches long with a diameter of 6 inches, that would support the legs of the person doing the handstand to help them regain balance without needing to return their feet the ground, each time balance is lost. The key feature of the apparatus would be a mechanism that would allow one of the pads to be positioned directly above the other (in the start position) and rotate safely(smoothly with no loud noises) around the feet of the person doing the handstand once they "kick up" into position. This rotational movement of the top pad would be activated by the pressure of the (heels of calfs)hitting the primary support pad. Once this rotation has a occurred, the apparatus would provide support on both sides. Ide...
Category: Product Design       
Skills: Manufacturing Design, Product Design       
Preferred Location: North America

k****ken
 [?]
Sign in to view client's details.
| k****ken
|    Canada
Fixed Price: $2,000 or less   |  Posted: Jun 28, 2015  |  Ends: 11d, 20h  |   18 Proposals
Device functionality: -Soil moisture and PH sensor probe (non-corrosive) planted into ground -Daily soil moisture and PH Readings transmitted via SMS to mobile phone -Solar power as primary source with battery cell as secondary source -Power on only when a reading is to be taken -GPS tracker -Data not stored on device -Housed in waterproof casing Requirement: Construct a finished circuit prototype that fits my external design outline. External design illustration will be provided to shortlisted candidate
Category: Product Design       

N****n_A
 [?]
Sign in to view client's details.
| N****n_A
|    United Kingdom
Fixed Price: $100 or less   |  Posted: Jun 28, 2015  |  Closed  |   19 Proposals
Hello, I have a model that is natively built in Cinema 4D. From there I can export couple of major known 3D formats which will be usefull for transitioning. We need this model to be corrected into SolidWorks so that the files could be used for plastic molding. STEP/IDX The model is the enclosure of a new tablet device, like IPAD. After a first review of the freelancers we will contact people most suitable to our needs in terms of: good portfolio, past similar works, elance account/experience. After we contact the freelancers an NDA will be needed to be signed. Regards,
Category: Product Design       

****
 [?]
Sign in to view client's details.
| Client
|    Austria
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 28, 2015  |  Ends: 11d, 15h  |   10 Proposals
I require assistance of an AutoCAD Expert to do some research and provide me the best designs. Details will be provided in the interviewing phase. Proposals shall be accompanied by details of work you can and overall experience.
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       
Preferred Location: Pakistan

r****ani
 [?]
Sign in to view client's details.
| r****ani
|    Pakistan
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 27, 2015  |  Closed  |   21 Proposals
We are looking for someone to design, draft 3d photos, cad cam design for a fully operational innovative mechanical water pic Due to the sensitivity and proprietary nature of the product design - a more detailed summary will be supplied to chosen elancer. Please submit your proposal and hourly rate for this project.
Category: Product Design       
Preferred Location: Serbia

b****ich
 [?]
Sign in to view client's details.
| b****ich
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Jun 27, 2015  |  Closed  |   9 Proposals
Hello, I need someone that can reacreate a new personal transporter similar to the photo attached. I Have some specific changes that needs to be done. I someone that has real experince that can design the product from start to finish including all components. I need to this to be completed with 2 weeks of time, serious inquires only.
Category: Product Design       

r****ico
 [?]
Sign in to view client's details.
| r****ico
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 27, 2015  |  Ends: 10d, 20h  |   2 Proposals
We are a luxury fashion activewear company located in Europe. We are currently shortlisting for a highly skilled and experienced Sportswear/Activewear & Apparel Creative Pattern Cutter/Grader. The successful applicant will be able to bring flair, accuracy and attention to detail with a strong eye for fit throughout the development process. Role includes: ? Reporting to and working closely with the designer ? Assist in design meetings ? Responsible for producing creative patterns from sketches, drawings or inspiration from a book ? advise on suitable fabric compilation ? Responsible for patterns from design stage through to final pattern ready for final construction (either manual or software) ready to hand to manufacturer and complete all specification sheets ready for production. Accuracy of patterns is extremely important, all patterns must be correct (notches match, drill holes are marked, correctly annotated and all pieces fit together. Candidate brings: ? Ideally working w...
Category: CAD       

i****ess
 [?]
Sign in to view client's details.
| i****ess
|    Switzerland
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 27, 2015  |  Ends: 10d, 20h  |   6 Proposals
Hello I have a need for a minimum of 200 of the following. Should sales be strong I'd expect this figure to rise to over 1000. The piece is a 2inch disc of plastic about 150 to 250 microns thick. It is moulded around the base of a standard beer bottle and has taken on the curved edges and even the small protrusions around the rim. (These protrusions are not necessary but are also not a problem.) Please see attachments . I need the finished piece to be fairly rigid and cut neatly to hug on the bottom of the bottle and come up around the sides just a few millimetres. It should fit over the base of the bottle very snuggly. It's important that the plastic is clear and when placed on the base of a clear bottle is hard to see To make my prototype I heated acetate sheeting in water and pressed the base of a beer bottle onto the disc to make it mould to the shape I need. I would imagine that the easiest way to produce what I need is to cut the base off a beer bottle, invert i...
Category: Product Design       

S****lin
 [?]
Sign in to view client's details.
| S****lin
|    Ireland
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 26, 2015  |  Closed  |   0 Proposals
Looking for AutoCAD Drafting and Design work. Taking sketches and line drawings and laying them out on 8.5x11 titleblocks and detailing connections. Inserting project info, dimensions, callouts etc. We will start with 3 models but will need up to 10-20 fixtures per week on an ongoing basis. Will need you to sign nondisclosure agreement to protect our client confidentiality. We will provide title blocks files for your use. Attached are titleblocks and several 'example' light fixtures from previous projects. We only need 2D drafting (not 3D) for most projects. Please give us an hourly rate for ongoing work and/or redlines revision drafting. Please also look at the attached samples and give us an estimate of how much/how many hours those drawings would each require. Please deliver back as PDF and in AutoCAD 2007 format and sometimes DWG as necessary. We're looking for immediate work and an ongoing relationship. Thanks for bidding - looking forward to working with you!(ID: 74899...
Category: CAD       
Skills: AutoCAD       

L****ive
 [?]
Sign in to view client's details.
| L****ive
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Jun 26, 2015  |  Closed  |   1 Proposal
Design of existing product along with cad drawing for portable table project with up to 10 hours of work at $16 per hour.
Category: Product Design       

B****tin
 [?]
Sign in to view client's details.
| B****tin
|    Canada
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Jun 26, 2015  |  Ends: 10d, 4h  |   87 Proposals
I have planty of 2d drawings what need to be converted,everything will be as we desicussed on skype/ Payment will be on hourly bassis.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

c****a94
 [?]
Sign in to view client's details.
| c****a94
|    Serbia
Fixed Price: $1,000 - $5,000   |  Posted: Jun 26, 2015  |  Ends: 10d, 4h  |   6 Proposals
I have an Ultrasonic cuter that has documentation for activating automation and return a signal to automation after the cut is made. Link to my cutter documentation is   [obscured]  /url?sa=t&rct=j&q=&esrc=s&source=web&cd=3&ved=0CCkQFjAC&url=http%3A%2F%2F  [obscured]  %2Fus%2FDocuments%2FManuals%2F403-594.pdf&ei=QqiNVeSNOoncsAXUwL6ICg&usg=AFQjCNFhQ2Wvu1FtF8b49yLcs3UyFDk1Cg&bvm=bv.96783405,d.b2w . I need a setup to measure and feed 1" and 2" webbing. Webbing is on a roll so very little tongue required to pull. Need pulls as short as 4 inches to 85 inch. Accuracy needs to be within " 1/8 on 80 inch length.
Category: Product Design       

a****ock
 [?]
Sign in to view client's details.
| a****ock
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job