Save this Search
     

All JobsEngineering & ManufacturingProduct DesignCAD

 (18,467 results)  
Sort by:
  • Posted Date
Fixed Price: Not Sure   |  Posted: Jul 30, 2015  |  Closed  |   13 Proposals
REQUIREMENT: 5 YEARS proficiency in SolidWorks design. Must have SolidWorks, version 2014. Files must be submitted to us in version 2014 or earlier. OBJECTIVE: Create a 5-section treatment table design from existing 3 and 7 section designs. E-drawings of the 3 and 7 sections are attached for reference and the complete zipped file will be sent when the job is awarded. The new design should be based on the 3 section design and keep as much of that design as possible. The change being that instead of the head section cushion being one piece, it would be three pieces, similar to that of the 7 section. The sides of the head section are designed to go up and down by use of a gas cylinder, and swing away by pivoting on a post. COMMUNICATION: We will send you log on information for our "Zoom" conference collaboration software. This will enable you to discuss drawings on the screen with Chris here in Anaheim, CA. 1) We will send you a zipped SolidWorks file that you can open &a...
Category: CAD       
Preferred Location: Eastern Europe, India/Southern Asia

r****may
 [?]
Sign in to view client's details.
| r****may
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 30, 2015  |  Ends: 10d, 3h  |   13 Proposals
Hi, I'm Michael David, Design Director of Soulo. We are looking to create a waterproof case for the iPod Shuffle. We want to integrate different systems that come together in a cohesive, simple, and seamless design. We have created a prototype and the overall function-design will look like the attachments below. It will be a wearable neck case for surfers. Such components we need are: ? Waterproof Casing for the iPod Shuffle ? Fluid Design with Curves ? Waterproof earbuds ? A Screw In Locking System ? Earbuds modeled after other brands Would you and your company be able to handle all of these components? If not, would you be willing to work with other designers? Other hiring questions: What is your rate per hour? And what is your estimate for this job?
Category: Product Design       

s****ase
 [?]
Sign in to view client's details.
| s****ase
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 30, 2015  |  Ends: 10d, 2h  |   8 Proposals
I have finished with all the files in order to proceed with the first physical prototype. Itīs a key chain that has many features. Itīs length 3.20 in. width 2.00 in. and height is 0.58 in. If your interesting in taking this job message me and I can spare more details and the actual picture Thank you!
Category: Product Design       
Skills: Manufacturing Design       

a****223
 [?]
Sign in to view client's details.
| a****223 *
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Jul 30, 2015  |  Ends: 10d, 1h  |   13 Proposals
In need of a draftsman to create several field maps for a start up oil and gas company in the Gulf Coast. These images will be used on their website and other marketing material.
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       
Preferred Location: United States

k****ger
 [?]
Sign in to view client's details.
| k****ger
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Jul 30, 2015  |  Closed  |   3 Proposals
In need of a draftsman to create several field maps for a start up oil and gas company in the Gulf Coast. These images will be used on their website and other marketing material.
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       
Preferred Location: United States

k****ger
 [?]
Sign in to view client's details.
| k****ger
|    United States
Fixed Price: Less than $500   |  Posted: Jul 30, 2015  |  Ends: 9d, 23h  |   12 Proposals
Hi, I have these sunglasses. The pair that I had made a prototype of lacks curvature that most glasses have. The part that supports the glasses behind the ears are not curve and do not provide support for the glasses to stay on face. So the glasses easily slides off. I need this to be fixed and also ready for 3d printing. Please let me know if you can do it and how much it would cost. Thank you.
Category: Product Design       
Skills: 3D Printing, 3D Design       

D****ere
 [?]
Sign in to view client's details.
| D****ere
|    United States
Fixed Price: $500 - $1,500   |  Posted: Jul 30, 2015  |  Ends: 9d, 23h  |   4 Proposals
We are a start-up activewear brand looking for an experienced freelancer to help with technical design of our women's activewear line. We have illustrations and flats, but need specs/measurement that will help to bring our collection to life (13 - 30 styles). Looking for someone that can provide: - PRIORITY- make additions to our tech packs by providing proper measurements that can be used for garment production - alterations to sample(s) made by factory - finalize changes to tech pack You will need to be dedicated, timely, responsible, savvy, driven, creative, engaging, proactive and make adjustments to the designs until requirements are met. A quick turnaround time is needed. Please provide a portfolio of previous relevant work and indicate any applicable experience. Knowledge of latest trends and fashion in fitness apparel is essential and we are looking for a fashion designer that has worked in PREMIUM athleisure wear. Our line is gear...
Category: Product Design       

t****tia
 [?]
Sign in to view client's details.
| t****tia
|    United States
Fixed Price: Less than $500   |  Posted: Jul 30, 2015  |  Ends: 9d, 22h  |   2 Proposals
Hello, I need a generic obd interface (hardware + plus software) , which can gather all available information provided by the machine and provide it as an xml. The hardware can be configured to monitor certain parameters like - car speed, car pollution efficiency (via some mechanism), braking or zig zag driving. and store this value and when required push it via obd cable (or wifi) based on configuration.
Category: Product Design       
Skills: Electronics, Embedded System, OBD Interface       

S****Vai
 [?]
Sign in to view client's details.
| S****Vai
|    India
Fixed Price: $500 - $1,000   |  Posted: Jul 30, 2015  |  Ends: 9d, 22h  |   4 Proposals
Hello, I need help in designing a prototype for water flow meter. (which can be then updated be measure gas too). Following functionalities are required a) Minimum battery consumption b) Tell volume flow in literes in last x minutes , and should store last n readings. c) On request or or automatic convey the information via ipnetwork to a machine.
Category: Product Design       

S****Vai
 [?]
Sign in to view client's details.
| S****Vai
|    India
Fixed Price: Less than $500   |  Posted: Jul 30, 2015  |  Ends: 9d, 21h  |   22 Proposals
I want to have someone design a coffee table for me. I want it to be primarily black. It has to be made with wood and plastic for an affordable design. I also want it to have hidden storage like the attached examples. However, I want cupholders, a hidden magazine rack, remote holders, and it has to be assembled easily at home. I only want designers with previous experience in furniture design.
Category: Product Design       

M****030
 [?]
Sign in to view client's details.
| M****030 *
|    United States
Fixed Price: Not Sure   |  Posted: Jul 30, 2015  |  Ends: 9d, 21h  |   22 Proposals
CLARIFICATION: We DO NOT need renderings ! We need mill work shop drawings in order for the shop to build it. We need 3d views but they will be line drawings with dimensions. We need drawings to give to a woodworker so he can build this bar. We prefer you do the in autocad / sketckup but if you have other software just mention what you would like to use. Drawings must be in enough detail ( dimensions etc.) so the woodworker can order material and build it . We need plans, elevation details, section and 3d views ( 2 minimum) Attached is a rendering of the design for the bar. Also we have attached a bunk bed design we had done - this shows the quality of what we want for the desk. We do not have any files of the rendering of the bar - sorry/ Please just submit two examples of similar restaurant bars you have done - Please note submissions without a fixed fee will not be considered. Thanks
Category: CAD       
Skills: AutoCAD, SolidWorks, SketchUp Pro, AutoDesk Revit       

s****ner
 [?]
Sign in to view client's details.
| s****ner
|    United States
Fixed Price: Less than $500   |  Posted: Jul 30, 2015  |  Ends: 9d, 14h  |   3 Proposals
I am looking to create a frisbee for a new game i have invented. The frisbee needs to be approx 175g including the electronic timing device. What i hope to achieve is a frisbee that when thrown is just a normal frisbee, but when caught it activates a variable timer 2/3/4/5 sec. The timer then activates LED's to flash if the frisby is not spinning before the time has lapsed. The electronics need to be moulded within the plastic with access to the battery and the switch for on/off and varying the timer needs to be accessible. Finally the unit needs to be waterproof, sand proof etc. As this will predominantly be a beach game.
Category: Product Design       

a****808
 [?]
Sign in to view client's details.
| a****808
|    Australia
Fixed Price: Less than $500   |  Posted: Jul 30, 2015  |  Ends: 1d, 13h  |   18 Proposals
I need CAD drawings similar to the pipe/tubing of the attached image. I will supply the dimensions the curves will be left to you. I have the frame/chassis of the car and will give you the dimensions to work with the pipe/tubing. I will also spec the pipe OD and ID. Joints are to be welded and will be affixed to the car with clamp, nuts and bolts. $200.00 USD is too much for this job. Supplier must be able to communicate in English over the phone.
Category: CAD       
Skills: AutoCAD, AutoCAD 2012       

R****uma
 [?]
Sign in to view client's details.
| R****uma
|    United States
Fixed Price: Not Sure   |  Posted: Jul 30, 2015  |  Closed  |   23 Proposals
We are a manufacturer supplying the automotive industry. We have an immediate need for someone with CAD and 3D rendering experience. Scope of work will be to create a render image of our product. There will be a need for ongoing work.
Category: CAD       
Skills: 3D Modeling, AutoCAD, Industrial Design       

M****N_S
 [?]
Sign in to view client's details.
| M****N_S
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 30, 2015  |  Closed  |   2 Proposals
Need to hire USSD developer for developing apps on a platform with minimal knowledge about coding its an easy jobbbb
Category: Product Design       

U****pia
 [?]
Sign in to view client's details.
| U****pia
|    Singapore
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 29, 2015  |  Ends: 9d, 7h  |   7 Proposals
My company has an injection pump system that is in need of a complete redesign. The product was introduced in 1995 and it needs a modern overhaul. The system is comprised of a pump, tank, tank base, mixer motor and shaft, plumbing assembly, and dual control switch assembly. Tank and Base are rotationally molded parts. Designer needs to have experience/understanding of the roto-molding process and roto-molded part designs. System upgrade needs will be discussed with designer. Expectations are that the designer will understand our needs and updates, make sure that those needs are met while providing creative, functional and engineered aspects of his/her own. Designer will need to sign a confidentiality and work-made-for-hire agreement after selection.
Category: Product Design       

T****orn
 [?]
Sign in to view client's details.
| T****orn
|    United States
Fixed Price: Less than $500   |  Posted: Jul 29, 2015  |  Closed  |   22 Proposals
The purpose of this job is to design and fabricate a mold for some prototype parts I am developing. I have drafted most of the specifications and dimensions for the mold in Visio. I would need you to assess my proposal and offer solutions / changes needed to actually fabricate it.
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       
Preferred Location: North America

m****bes
 [?]
Sign in to view client's details.
| m****bes
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 29, 2015  |  Ends: 9d, 6h  |   15 Proposals
So I have design wok that is drawn by an engineer. That's the good news, now the bad news for us is we don't have workshop drawings. I'm looking for a freak to take our drawings and make them workable. The freakish worker will ultimately save the day. Because I am currently so deep in red tape I feel like i'm drowning in it! If you can take a scanned A4 and turn it into some thing amazing with ease then you could be the freak we need on our freakish team to perform what seems to be a freakish project. It's transportable buildings, the first job is a 12m x 3m building and we pretty well made a start on this. My engineer here in Perth has said we need a technical office for all these kinds of concerns in building etc. Hopefully this can be you, for now I am looking to take it job at a time.
Category: Product Design       

R****tag
 [?]
Sign in to view client's details.
| R****tag
|    Australia
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Jul 29, 2015  |  Ends: 9d, 4h  |   10 Proposals
Require the services of rendering a realistic-looking image for a one page pamphlet. The pamphlet will include text that I have provided on a template provided. Would be helpful if willing to sign an NDA. Thank you in advance!
Category: Product Design       

a****aum
 [?]
Sign in to view client's details.
| a****aum
|    United States
Fixed Price: Not Sure   |  Posted: Jul 29, 2015  |  Ends: 9d, 3h  |   16 Proposals
I am seeking an mechanical engineer or firm that can help me develop a working prototype for a new product that involves something close to a spring roller shade with a modified cover or attachment bracket. Would like someone with experience that can also suggest cost-effective manufacturing methods. Would like someone with a good rating and multiple jobs completed. Must be willing to sign NDA. If interested, please reply with examples of your previous work. Please include keywords Roller Shade in your response.
Category: Product Design       

G****ner
 [?]
Sign in to view client's details.
| G****ner
|    United States
Hourly Rate: $20 - $50 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 29, 2015  |  Ends: 9d, 1h  |   16 Proposals
Adaptive Habitat (  [obscured]  /) combines informed observation, rigorous analysis, and innovative technology with environmental consciousness to create resilient, high-performance homes and farms. Homesteads that leverage and interact with the environment in which they're built, producing their own energy and food, harvesting and storing water, cycling nutrients, and restoring the surrounding ecosystems. As engineers and ecologists, we offer a perspective and range of services unique in the market. We combine our scientific, technological, environmental and management credentials to direct complex, multidisciplinary projects from site analysis to project planning, through to design, implementation, and ongoing support for clients and properties across North America. Our business is rapidly growing and we need to find and foster working relationships with one or more talented draftspersons, graphical communicators and artists who can take our designs, technical informatio...
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

V****ure
 [?]
Sign in to view client's details.
| V****ure
|    Canada
Fixed Price: Less than $500   |  Posted: Jul 29, 2015  |  Closed  |   1 Proposal
I'm working on creating a Motion-Control Music system and need a prototype CAD designed for the housing to 3D print and use for promotion and pitching to investors. The design is a Pyramid with rounded edges 6"x6" at the base and 5" from the base to the apex. A single camera lens and some additional features (Power button, slot for input, logo) are the only things we need on the design. We have designs and specifications for the concept and if you are interested we would like to start right away. We are looking to have the CAD file completed by next Wednesday (August 5th) Rate for payment negotiable.
Category: CAD       
Skills: AutoCAD, Rapid Prototyping       

G****LLC
 [?]
Sign in to view client's details.
| G****LLC
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Jul 29, 2015  |  Ends: 8d, 22h  |   2 Proposals
Hi, I would like to hire an expert pattern maker to design 2-3 women's swimwear suits to include specifications for manufacturer to create a sample. Thanks, Jeff
Category: CAD       

j****as1
 [?]
Sign in to view client's details.
| j****as1
|    United States
Fixed Price: Not Sure   |  Posted: Jul 29, 2015  |  Closed  |   5 Proposals
Create a schematic and single sided circuit board design in 'Eagle files' using Cadsoft Eagle from a hand annotated schematic and PCB layout similar to those shown in the attached design guideline document.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

t****eon
 [?]
Sign in to view client's details.
| t****eon
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job