Save this Search
     
Sort by:
  • Posted Date
Hiring Open
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 21, 2015  |  Ends: 9d, 15h  |   2 Proposals
we would like to mobilize our website:   [obscured]   so that we are not penalized by google.
Category: Product Design       
Skills: CSS, HTML       

m****le3
 [?]
Sign in to view client's details.
| m****le3
|    United States
Fixed Price: Not Sure   |  Posted: Apr 21, 2015  |  Ends: 9d, 12h  |   2 Proposals
I need help with a loudspeaker design. I have designed the outer cosmetic case but need some help with designing the sealed inner cabinets. I currently have 3d renders of the outer image. The loudspeaker is a 3 way floorstander containing 1 x 11" bass 1 x 5" midrange 1 x 2" tweeter If it is possible I would like some help (not redesigning the wheel) but creating a dedicated inner cabinet for each drive unit, rather than just boxing them in I feel it would be better to create an inner cabinet that will allow the driver to work more naturally.
Category: Product Design       

A****rth
 [?]
Sign in to view client's details.
| A****rth
|    United Kingdom
Fixed Price: $500 - $1,000   |  Posted: Apr 21, 2015  |  Ends: 9d, 11h  |   11 Proposals
I want to re-design the LED in-car message sign, see attached. I want it to be 16" in length and 2" in width. It will be attached by suction to the inside of the rear windscreen and lights up when the appropriate button is pressed on the remote control to show "THANK YOU" or "SORRY" . It will be controlled by wireless remote control, powered by AA batteries, attached to the steering wheel. The car sign itself will also be powered by AA batteries. I need an experienced product designer, with knowledge of LED technology.
Category: Product Design       
Skills: Product Design, Product Development       

F****rey
 [?]
Sign in to view client's details.
| F****rey
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 21, 2015  |  Ends: 9d, 11h  |   7 Proposals
Need a materials engineer to help design a new product. Experience with sound proof/sound reduction materials useful. Payment negotiable.
Category: Product Design       
Preferred Location: United States

A****NYC
 [?]
Sign in to view client's details.
| A****NYC
|    United States
Fixed Price: Not Sure   |  Posted: Apr 21, 2015  |  Ends: 9d, 11h  |   21 Proposals
I am in need of a prototype. I have all of the specs ready. The best way I can describe it for the sake of interest is...If I needed a plastic cast of a fork, spoon, comb, game case can you do it? If so then you are the person that I'm looking for.
Category: Product Design       

P****yer
 [?]
Sign in to view client's details.
| P****yer *
|    United States
Fixed Price: $500 - $1,000   |  Posted: Apr 21, 2015  |  Ends: 9d, 10h  |   24 Proposals
Looking to refine current project done in solidworks. Need to find happy medium between size/cost to create affordable retail product. Need to decide between blow moulded or inject mould? Creativity is a must - designed for kids
Category: Product Design       

C****han
 [?]
Sign in to view client's details.
| C****han
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 21, 2015  |  Ends: 9d, 8h  |   17 Proposals
Need Shop Drawing for Interior Doors. Please contact me for further information and details. Need this done as a RUSH.
Category: Product Design       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       

J****ass
 [?]
Sign in to view client's details.
| J****ass
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 21, 2015  |  Ends: 9d, 7h  |   7 Proposals
I have a functional prototype for a new piece of fitness equipment. I need someone with experience or knowledge of magnetic eddy current brakes that are used in fitness equipment ie: a magnetic spin bike. The braking system will need to be much stronger than a bike however. Once the braking system design is complete I will need a CAD.
Category: CAD       
Skills: 3D Modeling, AutoCAD, Pro-E       

C****ner
 [?]
Sign in to view client's details.
| C****ner
|    United States
Fixed Price: Less than $500   |  Posted: Apr 21, 2015  |  Ends: 8d, 19h  |   22 Proposals
I'm based in Cerritos (SoCal) and I'm currently looking for a Mechanical Engineer to make a production drawing for a small Consumer Electronic appliance. I will provide the machine and you would need to make a drawing for a factory to manufacture.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

c****bot
 [?]
Sign in to view client's details.
| c****bot
Fixed Price: $500 - $1,000   |  Posted: Apr 20, 2015  |  Ends: 16h, 0m  |   37 Proposals
We require someone to convert two sets of PDF plans into ArchiCAD. Details: 1. To be fully modelled and annotated in ArchiCAD (preferably v18 but not critical) 2. Layout sheets to be created as per provided plans and elevations (without titleblocks) 3. DWGs of the provided plans and elevations can be provided 4. Materials allocation to building elements is welcome but not critical 5. Completion date: 11 May 2015 6. Deliverables: Two ArchiCAD PLA files Thanks.
Category: CAD       
Skills: 3D Modeling, ArchiCAD, Drawing, Drafting       

A****oah
 [?]
Sign in to view client's details.
| A****oah
|    Australia
Fixed Price: Not Sure   |  Posted: Apr 20, 2015  |  Ends: 8d, 15h  |   13 Proposals
I work for a small Amish kitchen cabinet and furniture builder in western Indiana. We are looking to hire a person or firm to take care of all of our Kitchen Cabinet designs. (CAD or 20/20 preferred) I will need about 5-7 designs made up per month to start. We will be providing all the measurements per kitchen and will give you detailed instructions on what all is needed per design. We will require plan view and elevation drawings. Looking to work out a rate per design or per kitchen. We prefer the designs to drawn in 20/20 but I will also consider other software programs as long as it can deliver what I need. All kitchen designs will be average or standard kitchens and will not require allot of design. Anyone interested in this position can submit their rough price per design and also submit any designs they have done in the past and then I can provide more details of the job once I get some offers in. Look forward to hearing from designers all over. Thanks.
Category: CAD       
Skills: AutoCAD, 3D Design, 2D Design       

b****gen
 [?]
Sign in to view client's details.
| b****gen
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 20, 2015  |  Ends: 8d, 14h  |   1 Proposal
I am a design student investigating air pollution related wearable technology and I am looking for an engineer who knows a lot about air purification systems, headphones and wearable devices (components) in general. A startup in China recently released their design for a wearable air purifier device and claims that it can effectively purify up to 3000 litres of contaminated air per hour. Here are some articles on the product:   [obscured]  /2014/11/headworm-headgear-china-air-purifier.html   [obscured]  /2014/10/30/chongqing-tech-team-rolls-out-worlds-first-wearable-air-purifier.php Essentially it is a "non-ozone electrostatic precipitator" with 6-8 hours of battery life and a very small pm2.5 dust sensor They have not released too much info on the product but a lot of people are skeptical of the device. I would like someone with enough knowledge in these related areas to comment on feasibility of the product, whether it can actually be effective or not. ...
Category: Product Design       

s****623
 [?]
Sign in to view client's details.
| s****623
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: Apr 20, 2015  |  Ends: 83d, 13h  |   14 Proposals
Looking for experience in solar panel energy and product prototype development. We have all of our ideas and concepts patented, just need product construction and design with a knowledge in solar energy and electronics. Thank you!
Category: Product Design       

r****xas
 [?]
Sign in to view client's details.
| r****xas
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 20, 2015  |  Ends: 8d, 10h  |   15 Proposals
Need prototype of small electronic consumer product. Further description discussed when meeting. NDA
Category: Product Design       
Preferred Location: United States

c****nic
 [?]
Sign in to view client's details.
| c****nic
|    United States
Fixed Price: $166 or less   |  Posted: Apr 20, 2015  |  Ends: 8d, 10h  |   6 Proposals
I need a template designed, that I can edit when I need to. I have the colors, the logo in .eps format, and the basic lay out. Is this something that can be done in Adobe Illustrator? Once its doen can I edit it in WORD or do I need to use Adobe? I would want to be able to mail this out (in jpeg?) and have the ability to print it out if needed. Please see attached, Thank you
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

d****hic
 [?]
Sign in to view client's details.
| d****hic
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 20, 2015  |  Ends: 8d, 10h  |   15 Proposals
I am looking for somebody to do a detailed take off or estimate, followed by steel shop drawings, with all piece details.
Category: CAD       
Skills: 3D Modeling, AutoCAD       

n****osh
 [?]
Sign in to view client's details.
| n****osh
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 20, 2015  |  Ends: 8d, 9h  |   18 Proposals
We are looking for experienced OrCAD PCB desiner for occasional projects. It will be mostly conversion of existing PCB designs to OrCAD platform and preparation of PCB manufacturing documentation following company standards.
Category: CAD       
Skills: OrCAD, PCB Design, Cadence Platform       
Preferred Location: Canada

m****vic
 [?]
Sign in to view client's details.
| m****vic
|    Canada
Fixed Price: Not Sure   |  Posted: Apr 20, 2015  |  Ends: 8d, 8h  |   10 Proposals
I am looking for someone who will assist me in the design of a cosmetic compact which will primarily be made out of wood. The product will be aimed at the high end market and will be required to have a faultless design and finish that will appeal to people willing to pay a premium. The product will hold replaceable make up 'pans' and I will need assistance in the design of the fixing mechanism in which the pans are placed and replaced in the compact. Ideally I would be best supported by someone who has experience working on high end and/or luxury items with multiple components and who are able to fully design for manufacture. I am looking for someone whom I can give a detailed brief to and they will be able to come up with innovative ideas for the design and replacement fixing mechanisms. I will also require assistance in the design of the primary packaging and make up brushes, however this can be arranged separately. attached is an example of the size compact product we would be lo...
Category: Product Design       

c****csb
 [?]
Sign in to view client's details.
| c****csb
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: 4-6 months  |  Posted: Apr 20, 2015  |  Ends: 8d, 6h  |   16 Proposals
Hi, I'm looking for some help to contact multiple companies in China to help with our import needs to the USA. We're looking for companies that export home furnishing products to the USA, and need help to contact them, arrange samples to be sent, and other needs. Working with us, you will be the point of contact to help locate manufacturers in China and contact them on our behalf. We will supply you with addresses, or websites of companies, and you will help locate them and get catalogs and product sheets. You will help organize multiple samples to be sent over to us in NY and once we decide to work with a manufacturer, you will help oversee production. Please supply references of companies in the USA you have worked with in this manner. Thank you, Lawrence
Category: Product Design       

E****tem
 [?]
Sign in to view client's details.
| E****tem
|    United States
Fixed Price: $500 - $1,000   |  Posted: Apr 20, 2015  |  Ends: 8d, 5h  |   14 Proposals
I am looking for someone who has deep experience in plastic molding, extruding, design and fabrication. I need to develop a product that is able to slide over a piece of rectangular steel tubing (with fairly tight tolerance) to protect it from drop impact and abrasion. The steel is 6"x3"x1/4" wall thickness with radiused corners. An example of the steel is here:   [obscured]  /products/hrsteel2.phtml?page=rttube The plastic needs to be fade resistant (completely non-fading is preferred if such a thing exists as this product will be outdoor). This material should also be resistant to coastal salt spray and typical road chemicals. It also should be CNC machinable, resistant to impact/abrasion and is ideally available in many colors (the ability to custom match would be perfect). I prefer lengths provided up to 20' long which we could then cut to length and machine in our shop. My guess is that these will need to be 1/8"-1/4" in thickness. The...
Category: Product Design       

i****mar
 [?]
Sign in to view client's details.
| i****mar
|    United States
Fixed Price: $500 - $1,000   |  Posted: Apr 20, 2015  |  Ends: 8d, 1h  |   15 Proposals
Hello: Please respond if you offer rapid prototyping services directly or through your partners. Both consultants and prototype shops will be considered. We have completed the design of a simple housing, STEP files are available. Now looking to build a 100-500 unit batch in silicon/PX223/etc. using soft (secondary) tools.
Category: Product Design       

p****ian
 [?]
Sign in to view client's details.
| p****ian
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job