Save this Search
     
Sort by:
  • Posted Date
Fixed Price: Not Sure   |  Posted: Jul 03, 2014  |  Ends: 4d, 2h  |   22 Proposals
Drafting from a PDF file for a 2 unit residential attached complex into ACAD file. Require floor plans, elevations, electrical, foundation, sections, site plan and garage Desired Skills 3D Modeling, Architecture, AutoCAD
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       

H****nzo
 [?]
Sign in to view client's details.
| H****nzo
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 02, 2014  |  Ends: 4d, 0h  |   2 Proposals
We are looking to launch our brand and require a pattern maker/seamstress who can assist with samples and production. We are looking to produce high quality aprons, which are stylish and functional for creative chefs and artisans. We have a few samples and would like to take elements of each to come up with a design. As a professional Chef, with over 20 years of experience, we need someone to articulate our ideas into a finished product. We might need assistance in sourcing materials as well. Please send your experience and hourly rate expectations for us to consider. Thank you, Culinary Lab
Category: Product Design       
Preferred Location: United States

T****LAB
 [?]
Sign in to view client's details.
| T****LAB
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 02, 2014  |  Ends: 3d, 22h  |   2 Proposals
Looking for someone with deep experience creating apps for the Salesforce app exchange. We have built our app, but need an experienced software developer to take our package and create a managed package that will meet the satisfy the Salesforce requirements. Several examples of successful release of applications into the Salesforce Appexchange is a requirement for this position.
Category: Product Design       
Skills: Salesforce App Development       

a****hin
 [?]
Sign in to view client's details.
| a****hin
|    United States
Fixed Price: Not Sure   |  Posted: Jul 02, 2014  |  Ends: 3d, 19h  |   35 Proposals
Design a simple CAD staircase going below ground to an underground entrance. Work per design specifications / customer requests to properly show details of stair riser / treads and proper views of the work to be done by contractors.
Category: CAD       

r****ats
 [?]
Sign in to view client's details.
| r****ats
|    United States
Fixed Price: Less than $500   |  Posted: Jul 02, 2014  |  Ends: 3d, 17h  |   3 Proposals
PCB Review sheet A report of one to two pages is needed as a verification sheet of the given PCB. In the report please identify the chips and their utility. Questions that can be answered are the following: With the given model, what is the capacity of the USB? What are the reading and writing speed, the system file for example? A BOM is attached to the PCB. How complete is the BOM (for manufacture). What do the input output on the ICs stand for? Briefly explain. You can elucidate any area worth pointing out in the report. The cost of the work is estimated at $25. If accepted it should be completed in approximately one week. Thanks, ChrisB5a
Category: Product Design       

C****B5a
 [?]
Sign in to view client's details.
| C****B5a
|    United States
Fixed Price: Not Sure   |  Posted: Jul 02, 2014  |  Ends: 3d, 16h  |   7 Proposals
I am a professional keybaord player and I have an idea for a keyboard stand which is an improvement over anything that is on the market, but I need help designing it. I'm in the UK so someone in the UK is preferred, but I'm open to any and all suggestions. Thanks.
Category: Product Design       

b****nes
 [?]
Sign in to view client's details.
| b****nes
|    United Kingdom
Fixed Price: $20 - $25   |  Posted: Jul 02, 2014  |  Ends: 3d, 14h  |   15 Proposals
1. Need Digitization of Maps (Images). 2. Required three shape files ( Polygon, Line , Texts) 3. Texts should be on the same position as per seen into the maps. 4. Person should have knowledge of Urdu (Most Of maps will be in Urdu language) 5. We required shape file. For it whatever candidate use software like (Auto CAD, AGC GIS, Map Info) etc. 6. Person should knowledge of how to digitization work. 7. Per 12 Sheet's delivery and get 20 $ and we have more then 3000 sheets. My Skypee ID is- indreshtiwari ( If you have any issue then catch me on it)
Category: CAD       
Skills: ArcGIS, CAD/AutoCAD       

s****hal
 [?]
Sign in to view client's details.
| s****hal
|    India
Fixed Price: Less than $500   |  Posted: Jul 02, 2014  |  Ends: 3d, 12h  |   13 Proposals
Hello, I want to start selling vaporizers -- e-cig type -- similar to the ones that are found on this website:   [obscured]   I'd like for you to research and find me potential: 1. Wholesale opportunities to buy vaporizers and resell them. 2. Manufacturers that supply the wholesalers, so I can have private label ones made. I have to move on this job fast. Matthew
Category: Product Design       

h****o22
 [?]
Sign in to view client's details.
| h****o22
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Jul 02, 2014  |  Ends: 3d, 12h  |   15 Proposals
Hi I have commercial plasterboard company looking for estimators who understand my industry Metal stud Plasterboard Insulation Materials Ceiling framing
Category: CAD       

B****ter
 [?]
Sign in to view client's details.
| B****ter
|    Australia
Fixed Price: Less than $500   |  Posted: Jul 02, 2014  |  Ends: 3d, 10h  |   32 Proposals
I am in the process of developing a portable Gas Cooker + Cylinder and I need someone to put together the drawings/diagram from which the product will be produced. I know exactly what I require & need someone to put it together for me
Category: Product Design       

G****008
 [?]
Sign in to view client's details.
| G****008
|    United Kingdom
Fixed Price: Less than $500   |  Posted: Jul 02, 2014  |  Ends: 3d, 10h  |   12 Proposals
Hola, estoy necesitando de alguien que me pase planos electricos / caņerias en autocad. Por favor contactarse directamente por este medio. gracias. Ignacio
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

i****rbe
 [?]
Sign in to view client's details.
| i****rbe
|    Argentina
Fixed Price: Less than $500   |  Posted: Jul 02, 2014  |  Ends: 3d, 5h  |   5 Proposals
I have a design for a plush toy that I would like to have made professionally. If you are a skilled plush toy maker then please reply.
Category: Product Design       
Skills: Manufacturing, plush design, seamstress, sewing       

s****fjr
 [?]
Sign in to view client's details.
| s****fjr
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Jul 01, 2014  |  Ends: 3d, 1h  |   0 Proposals
Independent Contractors only We are looking for people who use Apparel CAD program who can write articles for us. The articles would include tips, how to use certain techniques and how to make certain objects. Articles would include screenshots demonstrating what you are writing about. Short articles would be about 300-500 words. We will consider longer articles if the topic is compelling enough. We have a list of possible topics, but we are open to your topic suggestions. Before you apply view this YouTube video   [obscured]  /watch?v=oNhmsloelPY then explain what is your understanding of the functionalities of this technology what advance and disadvantage it has our current appal cad in the market like   [obscured]  /watch?v=eY--c4YTlo4   [obscured]  /watch?v=bhnggbNOKNE   [obscured]  /eng/stich.php   [obscured]  /watch?v=RmDuT_LvQUI   [obscured]  /wiki/Virtual_dressing_r... I would take a decision on this post v...
Category: CAD       

D****015
 [?]
Sign in to view client's details.
| D****015
|    United States
Fixed Price: Less than $500   |  Posted: Jul 01, 2014  |  Ends: 2d, 22h  |   1 Proposal
I am looking to create an embroidery pattern that is to be applied to a hat brim. The hat brim is oval and I would like something like a graph of sine/cosine with repeating waves. This will have to have peak to trough of 2 inches. The hat is oval with a circumference of 47 inches. The program would need to be a CAD program that will work on a large format embroidery machine. Compatible programs Richpeace, Tajima, Barudan, ZSK, Melco, Weija106 and Weijia105C
Category: Product Design       

j****mas
 [?]
Sign in to view client's details.
| j****mas
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 01, 2014  |  Ends: 2d, 22h  |   19 Proposals
I am in the process of designing a prototype product for small scale off-grid garden/farm irrigation. The technical parts of the design that I need help with include: Solar power, moisture sensors, a water pump/solenoid, and a pump/solenoid control unit. I don't know a lot about hardware programming but I believe that an Arduino or a similar board could work well to integrate these components into a working prototype. The product is designed to be connected to a water tank which will be placed above ground nearby. The device must be solar powered but it only needs to operate when the sun is shining so I'm hoping a battery will not be required, but I need advice on that. The product needs to include one or more moisture sensors, which will be implanted in a garden bed or at the base of a tree. When the sun is shining, and when the soil around the sensor becomes dry, the controller will either activate a small pump, or simply open a solenoid, in order for water to flow from the tank, thr...
Category: Product Design       

M****ger
 [?]
Sign in to view client's details.
| M****ger
|    Australia
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: Jul 01, 2014  |  Ends: 2d, 18h  |   27 Proposals
We are looking for a local experienced drafting specialist to support us in updating our current drawings to latest versions as well as supporting our design for new products. We are an instrumentation company so its mainly simple sheet metal layout and silk screen drawings. However we also have new design projects that we need to develop the full portfolio of assembly and manufacturing drawings for. we are based in Marlborough MA.
Category: CAD       
Preferred Location: United States

j****ott
 [?]
Sign in to view client's details.
| j****ott
|    United States
Fixed Price: Less than $500   |  Posted: Jul 01, 2014  |  Ends: 2d, 17h  |   5 Proposals
The output would only need to be 0-2 mA (variable) through sponge electrode contacts on the inside of a baseball style cap. A sponge electrode consists of a conductive backing behind a sponge-like material which soaks up salt water. Outside material must be water proof fabric. A fitted hat that molds to the persons head is ideal.
Category: Product Design       

u****roz
 [?]
Sign in to view client's details.
| u****roz
|    United States
Fixed Price: Less than $500   |  Posted: Jul 01, 2014  |  Ends: 2d, 16h  |   26 Proposals
This Dairy Mat needs to have the hole shape changed from square to 2.5" circles that taper to 2" at the bottom. This part will be made of compression molded rubber. We want as little weight as possible, but the part needs to have the strength to not tear when it is released from the mold.
Category: CAD       
Skills: AutoCAD, SolidWorks       

j****hue
 [?]
Sign in to view client's details.
| j****hue
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 01, 2014  |  Ends: 2d, 16h  |   29 Proposals
We are seeking design and production services for a single custom enclosure for a 1" x 2" embedded device. ## Details and Requirements - We can provide a sample device as it has already been manufactured (see attachment). We cannot change the device. - The device has two connectors that must be exposed: a micro USB connector, and an RJ-45 connector. - The device has four mounting holes that are available use, although the clearance near one of them is limited. - The device has four surface-mount LEDs adjacent the micro USB connector, which would ideally be exposed via a light pipe. However, this requirement is optional especially considering the cost. - The enclosure should ideally snap together or otherwise fit securely around the device without tools / screws. - The finished product should be ABS plastic; we are flexible on color, finish, and other aesthetic options. ## Deliverables The ideal candidate can produce the following deliverables: 1) During design, ...
Category: Product Design       

m****k3y
 [?]
Sign in to view client's details.
| m****k3y
|    United States
Fixed Price: Less than $500   |  Posted: Jul 01, 2014  |  Ends: 2d, 16h  |   36 Proposals
I need a CAD or .dxf drawing of a laminated rubber wheel chock. The chock will be constructed of two 1/4" thick steel plates that sandwich die-cut rubber pieces. The attached sketch shows the profile of the rubber pieces that will be stacked together to form the body of the chock. We will also need holes through the rubber cuts for three bolts. I need help determining the size and placement of the bolts because this chock will be stopping large aircraft and cannot fail. The drawing will also include the design of the plates. The plates will allow 1/4" overhang on the rubber on all sides. One of the plates will have a punch-out handle. Attached is a sketch of the profile of the chock. Also attached is s chock of similar construction but of a different size and shape. Hopefully this chock will demonstrate the handle size and shape, as well as the overall build style of the chock.
Category: CAD       
Skills: SolidWorks       

j****hue
 [?]
Sign in to view client's details.
| j****hue
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 01, 2014  |  Ends: 2d, 13h  |   10 Proposals
We need to design product packaging for our socks that do not use needles to hold the socks to the packaging. This needs to get done ASAP.
Category: Product Design       

p****sse
 [?]
Sign in to view client's details.
| p****sse *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 01, 2014  |  Ends: 2d, 11h  |   26 Proposals
I have attached images of the end product below: I need a Gas BBQ designed for the purpose to be inserted into a table as demonstrated in images I also need a table designed which will allow the BBQ to be fixed. The design will need to be suitable for a table manufacturer in Indonesia and BBQ manufacturer in China. Both aspects of design need to be aligned so separate manufactures can make the end product I need design spec so it can be outsource to a manufacturer BBQ needs to have insulation on the base to stop heat transfer. BBQ needs to be built to Australian standards 4 seater measures 1.5M by 1.0M - EST BBQ size 1m by 0.3 6 seater measures 1.9 M by 1.0 M - EST BBQ size 1.4m by .03 and the 8 seater is 2.5M by 1.0M - EST BBQ size 2.0m by .03
Category: Product Design       

R****ick
 [?]
Sign in to view client's details.
| R****ick
|    Australia
Hourly Rate: $20 - $30 / hr   |  Duration: 4-6 months  |  Posted: Jul 01, 2014  |  Ends: 2d, 10h  |   2 Proposals
We are looking for a "go-to" athletic apparel designer. Each week we design new products and we need to have a designer that knows materials, construction and design of athletic and casual wear apparel.
Category: Product Design       
Skills: Graphic Design, Textile Engineering       

p****sse
 [?]
Sign in to view client's details.
| p****sse *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 01, 2014  |  Ends: 2d, 7h  |   26 Proposals
I am looking to have some CAD drawings made so i am able to have cnc cut the parts to make an automotive grille. I have an existing one to use as a template, so i can take any measurements required. attached is a picture of the one i have on vehicle, and a close up of how it is put together. It is basically curved aluminium slats, held together with verticle supports on the rear. I do not require it be to cut, just the files created for me to use.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

S****247
 [?]
Sign in to view client's details.
| S****247
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 01, 2014  |  Ends: 2d, 6h  |   2 Proposals
1. We are looking for a PCB layout design trainer for one of our client. 2. The trainer should have vast knowledge on the PCB layout designing. 3. The trainer is expected to have handled similar sessions previously. 4. This training is for professionals who already have some knowledge on the PCB designing. This training is expected in advanced level of PCB designing. 5. Training should cover the PCB designing in the Cadence Allegro software 16.5 as well. 6. Training should start with basics and end with case study for a complex design. 7. More hand-on sessions and less theoretical sessions are preferred. 8. Trainer is expected to have good command over English. 9. Qualified trainers please apply with your profile. 10. Training location preferably Chennai, Bangalore - India.
Category: Product Design       
Preferred Location: India

g****oft
 [?]
Sign in to view client's details.
| g****oft
|    India
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job