Save this Search
     
Sort by:
  • Posted Date
Hiring Open
Fixed Price: Not Sure   |  Posted: 2h, 51m ago  |  Ends: 1d, 21h  |   6 Proposals
We are looking for assistance in creating a design for a new watch case product . The case should have 3 main components inside of it: watch docking station, battery/charger cable area and a location for the watch itself. The docking station should be able to open and fold within the case itself. We have more details regarding this case for the Provider that gets awarded this job. We also have a case that we like that can serve as a basis for the design of our new case although our case has different look and functionality. We also have a rough schematic for this new case for the Provider to review.
Category: Product Design       

j****man
 [?]
Sign in to view client's details.
| j****man
|    United States
Fixed Price: $100 - $250   |  Posted: Aug 28, 2015  |  Ends: 4d, 19h  |   3 Proposals
Will email details. Basic as below ? X-Y table with 2 step motors, 100mm x 100mm, move 2mm/revolution ? Controlled by step controller: 200 steps/revolution ? PLC: Allen-Bradley Micrologic 1400, 1766-L32BXB ? Program software: RSLogix 500, use PTO Input & Output Objects Input from HMI: ? 3-Positions, (X,Y), limit 0.5-45mm (or 50 - 4500 steps) ? Buttons (5 on HMI): Position1 ? go to position (x1,y1) Position2 ? go to position (x2,y2) Position3 ? go to position (x3,y3) Stop - Home ? go to (0,0) Output on HMI: Display actual coordinate (x,y) Limit conditions: If x or y > 45 mm or <-45 mm, stop and send alarm; E-stop: stop X,Y and display actual coordinate (x,y) Target: Sample A-B PLC grogram (.RSS) for run. Requirement: have to use A-B RSLogix 500 software to make the sample program.
Category: Product Design       
Skills: PLC & SCADA, RSLogix 500       

y****000
 [?]
Sign in to view client's details.
| y****000
|    United States
Hourly Rate: $40 - $50 / hr   |  Duration: Not Sure  |  Posted: Aug 21, 2015  |  Ends: 6d, 6h  |   38 Proposals
I'm looking for an innovative chair back and armrest design. I'm creating a unique chair product and I need a backrest that can be height adjusted about 14" (7" higher and 7" lower from starting location.) The chair back is connected to a frame that also supports 2 arm rests (one on each side, obviously). The armrests also need to be height adjustable, approximately the same range as the backrest (about 14") but they need to be adjustable independently of the backrest. This is the general requirement, but I will send the winning proposals my drawings and complete details of the existing product so far so you can see what the constraints are, etc. I don't want to divulge too much yet, but I will provide the successful candidate(s) with complete information and everything you need. The goal is to find an easy solution to this problem, and one that isn't complicated to manufacture.
Category: Product Design       

w****ger
 [?]
Sign in to view client's details.
| w****ger
|    United States
Fixed Price: Not Sure   |  Posted: Aug 21, 2015  |  Ends: 6d, 0h  |   20 Proposals
We're looking for someone that can come up with a stunning bottle design for our next fragrance launch. I've attached some examples of what we are looking for. We need ideas for unique bottle designs. This will involve researching the current marketplace for niche fragrances, and using your creative talent to come up with something spectacular! Must have experience in previous product designs, and open to creating different drafts. More information will be provided. Samples of actual products are attached below, we're looking for someone that can render new creative bottle designs, which will be sent to our product engineer.
Category: Product Design       

A****oup
 [?]
Sign in to view client's details.
| A****oup
|    United States
Hourly Rate: $40 - $50 / hr   |  Duration: 3-4 weeks  |  Posted: Aug 21, 2015  |  Ends: 5d, 20h  |   11 Proposals
Hello, I am trying to find a person to bring my product ideas to life and give them a real face and take them from sketches to a real look and design and then to real life. I have looked at other freelancers but no one works with soft goods (Materials) all just working with hard goods, electronics and solid designs. I saw your portfolio and was impressed and saw you back back designs so I figured Id reach out. I need a US base freelancer to make communication easier. I have three products I want to bring to life. I need a designer that can think outside the box, is creative and has the imagination to make this happen. Items: -Multi functioning sports towel/shell idea -caribiner key chain idea with multifuntioning hooks -folding top (similar to a jacket in shape) that can fold into itself
Category: Product Design       

W****MMA
 [?]
Sign in to view client's details.
| W****MMA
|    United States
Fixed Price: Not Sure   |  Posted: Aug 21, 2015  |  Ends: 5d, 19h  |   7 Proposals
I need help designing a product that will throw/lunch a football using compression and RFID to determine target. This support is just to build the blue print for the product and help identify the best method of achieving said goal. Below is the description of what the final product will do This device is a machine that replaces the need of having a quarterback or someone to throw a football during practice or fun. The machine throws footballs to its intended target based on RFID technology and selected patterns picked by the player. This machine give players the ability to play backyard football with as little as 2 players or can be used by a wide receiver to prefect his route running. Picture this: Four kids in backyard, One team with RED RFID wrist band that and the other team with Blue RFID wrist band. Each band is tractable by that the Elway. To start the game, each member of the red team selects a pre-programed route that he wants to run. Player 1 selects 10 yard post, Playe...
Category: Product Design       

j****kor
 [?]
Sign in to view client's details.
| j****kor
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 21, 2015  |  Ends: 5d, 18h  |   15 Proposals
Hi, we have 35 SPD files that we like to convert to DWG format. We need someone with SoftPlan version 14+ to do this for us.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD, SolidWorks       

s****har
 [?]
Sign in to view client's details.
| s****har
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Aug 21, 2015  |  Ends: 5d, 9h  |   10 Proposals
Conveyor Belt Scraper is very specialised product used on mine conveyor belt system. Please help us to find our potential buyers in Australia or your country.
Category: Product Design       
Skills: Engineering Design       

d****age
 [?]
Sign in to view client's details.
| d****age
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 20, 2015  |  Ends: 5d, 3h  |   5 Proposals
We have construction diagrams in SoftPlan (SPD) format. They are compliant to 2009 virginia code, but they need to be revised for 2012 virginia code. Changes are very minimal, but we need a designer who knows about construction diagrams and has SoftPlan software.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD, Construction       

s****har
 [?]
Sign in to view client's details.
| s****har
|    United States
Fixed Price: Not Sure   |  Posted: Aug 20, 2015  |  Ends: 5d, 3h  |   47 Proposals
Transpose 4 hand drawn floor plans to Autocad. Drawings must be professional quality. Finished product will be provided in Auto CAD DWG format as well as pdf. please provide lump sum pricing for first 4 drawings, and rates for additional drawings and changes to completed drawings. Building is cement floor, wooden stud metal clad construction. this project may be closed early as people bid
Category: CAD       

G****zel
 [?]
Sign in to view client's details.
| G****zel
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 20, 2015  |  Ends: 5d, 2h  |   81 Proposals
Hi all, we are a 3D printer company and we want to include 20 everyday items in our software for customers so that when they receive our machine, they can start printing things right out of the box-instead of having to go find things to print or design their own items to print. We need someone to design 20 different items. You will need to understand the context of 3D printing and I will help explain the way these products need to be created in order for the most success. Here is the list of items (we have more as well): 20 things that people would want the designs for (on our data base) 1) Money Clip 2) Organizers -Infinite stackable containers -Busines card holder/pencil or pen holder 3) Universal car mount for phone 4) Universal bike mount 5) Hair comb 6) Dog tags 7) Sunglasses 8) Shower head 9) Laptop Stand 10) Jewelry organizer (jewelry tree) 11) Wall hook 12) Toothbrush Holder 13) Angled wine bottle holder 14) Picture frame 15) Bow Tie THIS IS A LONG TERM PROJECT THAT WILL EXT...
Category: CAD       

m****don
 [?]
Sign in to view client's details.
| m****don
|    United States
Fixed Price: Not Sure   |  Posted: Aug 20, 2015  |  Ends: 5d, 0h  |   18 Proposals
I need help making a prototype of a clip that I already have designed. I will then take this prototype to manufactures for producing.
Category: Product Design       

b****rrb
 [?]
Sign in to view client's details.
| b****rrb
|    United States
Fixed Price: Less than $500   |  Posted: Aug 20, 2015  |  Ends: 4d, 23h  |   2 Proposals
I need some adhesive stickers made in some dimensions and in certain material and would like it done and sent within 2 days
Category: Product Design       

S****abs
 [?]
Sign in to view client's details.
| S****abs
|    Belgium
Fixed Price: Not Sure   |  Posted: Aug 20, 2015  |  Ends: 4d, 22h  |   11 Proposals
Dear all, I need some help in translating the drawing models (*.dxf) from curves into surfaces in AutoCAD. Please check the attached powerpoint, the main target is to create a guiding procedure in AutoCAD to extract and repair curves (if necessary), then generate a corresponding surface based on input parameters such diameter and angle, and finally export the results to CATIA. Of course, user interfaces are nice to have. But, this don't need to be perfect, I just need a simple prototype at this stage. If this goes well, then more could be just continued. Please kindly let me know if any information you may want to know. Thanks.
Category: CAD       
Skills: 3D Modeling, AutoCAD       

S****OHO
 [?]
Sign in to view client's details.
| S****OHO
|    Taiwan
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 20, 2015  |  Ends: 4d, 13h  |   6 Proposals
I am looking for a talented Electrical Engineer to design a electronic device based on provided requirements and tolerances. The final product will delivered as detailed design documents and full BOM for the device. Will look to have an ongoing relationship with the designer to improve the design post prototype stage.
Category: Product Design       
Preferred Location: Western Europe

g****502
 [?]
Sign in to view client's details.
| g****502
|    United Kingdom
Fixed Price: Less than $500   |  Posted: Aug 20, 2015  |  Ends: 4d, 12h  |   20 Proposals
I need to make a lid the works similar to the Hydro Flask lid in functional but different look wise. If you can make it easier to clean and with good water flow, that'd be better. Also looking for a alternative to their wide mouth standard lid 2 lids to design
Category: Product Design       

D****zHI
 [?]
Sign in to view client's details.
| D****zHI *
|    United States
Fixed Price: Less than $500   |  Posted: Aug 20, 2015  |  Ends: 4d, 10h  |   14 Proposals
A one piece rubber-like wrestling headgear for ear protection. - rubber molded piece fits tight to the head with no need for Velcro strap or adjustment equipment. - stays secure through rigorous athletics. - 3 different sizes for various head types. - a "rebar"-like cup protection around ears.
Category: Product Design       

t****483
 [?]
Sign in to view client's details.
| t****483
|    United States
Fixed Price: $20,000 - $100,000   |  Posted: Aug 19, 2015  |  Ends: 4d, 5h  |   19 Proposals
I am designing a modern electronic calculator with built in functions for the energy industry. this project will involve: System requirement analysis system architecture electronic, hardware and software requirement analysis electronic, hardware and software design system test system integration electronic, hardware and software test electronic, hardware and software integration electronic construction hardware construction software construction
Category: Product Design       

M****rgy
 [?]
Sign in to view client's details.
| M****rgy
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 19, 2015  |  Ends: 4d, 0h  |   7 Proposals
A portable sleeping apparatus for the daily traveler. I have engineered an original design into a STEP file along with a portion 3D printed. I can share with you all documents and files once we sign an NDA. Steve Spurr told me to get you working on this after you helped with the Tespo cup and the Coffee Keeper - Spice rack. Best, Justin Gauvin
Category: Product Design       

G****n89
 [?]
Sign in to view client's details.
| G****n89
|    United States
Fixed Price: Not Sure   |  Posted: Aug 19, 2015  |  Ends: 3d, 14h  |   6 Proposals
Hi Marko You recently assisted my husband in designing a preschool furniture, including chairs, tables, cots etc. My colleague (Lize) and I would like to make use of your services in the design of toddler chairs (and tables to follow). We have developed a brief with all the details which I would like to send to you (I'm struggling to upload it to the site). Could you send me your email address? We would also like to do a quick video conference with you to explain our thinking process and discuss any questions you may have. Would you be able to look at the brief and work on a cost estimate for us? Please also let us know when you would be available to chat.... Thanks so much Regards Iris & Lize
Category: Product Design       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       

I****ize
 [?]
Sign in to view client's details.
| I****ize
|    South Africa
Fixed Price: $200 or less   |  Posted: Aug 19, 2015  |  Ends: 3d, 12h  |   24 Proposals
need 2 sheet metal wallets designed, sketches to be sent later. require both to be as flat as possible, while holding 3 cards and having a money clip on the side. there will be moving parts in both wallets, with spring loaded movements to eject each card individually. a minimum number of parts will be used. further specifications will be sent with the sketches after the job has been awarded. This job is available again due to the previous freelancer not meeting any set goals. Please be able to finish the job inside the timeframe that you set, for the price that you set. require autoCAD/Inventor drawings and model and assembly drawings, bill of materials and DXF files of each sheet metal part.
Category: Product Design       

M****ead
 [?]
Sign in to view client's details.
| M****ead
|    Australia
Fixed Price: $1,000 - $5,000   |  Posted: Aug 18, 2015  |  Ends: 3d, 1h  |   16 Proposals
Our team is designing a single serving size, collapsible blender. See my other jobs for the design proposal brief. You should have interest/experience with electrical engineering, brushless motors, food products, blade design, etc. You will work with our design team, a 3D modeler, and our factory connection to design/build a working prototype and eventually manage the engineering of the first run of production. Please provide portfolio samples and share experience!
Category: Product Design       

r****acy
 [?]
Sign in to view client's details.
| r****acy
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 4-6 months  |  Posted: Aug 18, 2015  |  Ends: 2d, 23h  |   45 Proposals
Small family-run architectural firm in NJ seeks freelance drafter for CAD drawings with occasional Sketchup or other 3D work. Projects may involve developing schematic as-built drawings from field sketches, design development drawings, all the way through final working drawings. Most projects are 1-4 sheets. Work will also involve redlines and corrections, but someone who can handle a project without constant supervision is preferred. Must have good communication skills and be open to learning new things.
Category: CAD       
Skills: AutoCAD, SketchUp       

a****h91
 [?]
Sign in to view client's details.
| a****h91
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job