Save this Search
     
Sort by:
  • Posted Date
Hiring Open
Fixed Price: Not Sure   |  Posted: 1h, 25m ago  |  Ends: 14d, 22h  |   2 Proposals
REQUIREMENT: 5 YEARS proficiency in SolidWorks design. Must have SolidWorks, version 2014. Files must be submitted to us in version 2014 or earlier. OBJECTIVE: Create a 5-section treatment table design from existing 3 and 7 section designs. E-drawings of the 3 and 7 sections are attached for reference and the complete zipped file will be sent when the job is awarded. The new design should be based on the 3 section design and keep as much of that design as possible. The change being that instead of the head section cushion being one piece, it would be three pieces, similar to that of the 7 section. The sides of the head section are designed to go up and down by use of a gas cylinder, and swing away by pivoting on a post. COMMUNICATION: We will send you log on information for our "Zoom" conference collaboration software. This will enable you to discuss drawings on the screen with Chris here in Anaheim, CA. 1) We will send you a zipped SolidWorks file that you can open &a...
Category: CAD       
Preferred Location: Eastern Europe, India/Southern Asia

r****may
 [?]
Sign in to view client's details.
| r****may
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 3h, 4m ago  |  Ends: 14d, 20h  |   2 Proposals
Hi, I'm Michael David, Design Director of Soulo. We are looking to create a waterproof case for the iPod Shuffle. We want to integrate different systems that come together in a cohesive, simple, and seamless design. We have created a prototype and the overall function-design will look like the attachments below. It will be a wearable neck case for surfers. Such components we need are: ? Waterproof Casing for the iPod Shuffle ? Fluid Design with Curves ? Waterproof earbuds ? A Screw In Locking System ? Earbuds modeled after other brands Would you and your company be able to handle all of these components? If not, would you be willing to work with other designers? Other hiring questions: What is your rate per hour? And what is your estimate for this job?
Category: Product Design       

s****ase
 [?]
Sign in to view client's details.
| s****ase
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 4h, 14m ago  |  Ends: 14d, 19h  |   1 Proposal
I have finished with all the files in order to proceed with the first physical prototype. Itīs a key chain that has many features. Itīs length 3.20 in. width 2.00 in. and height is 0.58 in. If your interesting in taking this job message me and I can spare more details and the actual picture Thank you!
Category: Product Design       
Skills: Manufacturing Design       

a****223
 [?]
Sign in to view client's details.
| a****223
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: 4h, 51m ago  |  Ends: 14d, 19h  |   3 Proposals
In need of a draftsman to create several field maps for a start up oil and gas company in the Gulf Coast. These images will be used on their website and other marketing material.
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       
Preferred Location: United States

k****ger
 [?]
Sign in to view client's details.
| k****ger
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: 5h, 16m ago  |  Ends: 14d, 18h  |   2 Proposals
In need of a draftsman to create several field maps for a start up oil and gas company in the Gulf Coast. These images will be used on their website and other marketing material.
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       
Preferred Location: United States

k****ger
 [?]
Sign in to view client's details.
| k****ger
|    United States
Fixed Price: Less than $500   |  Posted: 7h, 9m ago  |  Ends: 14d, 16h  |   6 Proposals
Hi, I have these sunglasses. The pair that I had made a prototype of lacks curvature that most glasses have. The part that supports the glasses behind the ears are not curve and do not provide support for the glasses to stay on face. So the glasses easily slides off. I need this to be fixed and also ready for 3d printing. Please let me know if you can do it and how much it would cost. Thank you.
Category: Product Design       
Skills: 3D Printing, 3D Design       

D****ere
 [?]
Sign in to view client's details.
| D****ere
|    United States
Fixed Price: $500 - $1,500   |  Posted: 7h, 13m ago  |  Ends: 14d, 16h  |   0 Proposals
We are a start-up activewear brand looking for an experienced freelancer to help with technical design of our women's activewear line. We have illustrations and flats, but need specs/measurement that will help to bring our collection to life (13 - 30 styles). Looking for someone that can provide: - PRIORITY- make additions to our tech packs by providing proper measurements that can be used for garment production - alterations to sample(s) made by factory - finalize changes to tech pack You will need to be dedicated, timely, responsible, savvy, driven, creative, engaging, proactive and make adjustments to the designs until requirements are met. A quick turnaround time is needed. Please provide a portfolio of previous relevant work and indicate any applicable experience. Knowledge of latest trends and fashion in fitness apparel is essential and we are looking for a fashion designer that has worked in PREMIUM athleisure wear. Our line is gear...
Category: Product Design       

t****tia
 [?]
Sign in to view client's details.
| t****tia
|    United States
Fixed Price: Less than $500   |  Posted: 8h, 4m ago  |  Ends: 14d, 15h  |   0 Proposals
Hello, I need a generic obd interface (hardware + plus software) , which can gather all available information provided by the machine and provide it as an xml. The hardware can be configured to monitor certain parameters like - car speed, car pollution efficiency (via some mechanism), braking or zig zag driving. and store this value and when required push it via obd cable (or wifi) based on configuration.
Category: Product Design       
Skills: Electronics, Embedded System, OBD Interface       

S****Vai
 [?]
Sign in to view client's details.
| S****Vai
|    India
Fixed Price: $500 - $1,000   |  Posted: 8h, 29m ago  |  Ends: 14d, 15h  |   2 Proposals
Hello, I need help in designing a prototype for water flow meter. (which can be then updated be measure gas too). Following functionalities are required a) Minimum battery consumption b) Tell volume flow in literes in last x minutes , and should store last n readings. c) On request or or automatic convey the information via ipnetwork to a machine.
Category: Product Design       

S****Vai
 [?]
Sign in to view client's details.
| S****Vai
|    India
Fixed Price: Less than $500   |  Posted: 8h, 39m ago  |  Ends: 14d, 15h  |   14 Proposals
I want to have someone design a coffee table for me. I want it to be primarily black. It has to be made with wood and plastic for an affordable design. I also want it to have hidden storage like the attached examples. However, I want cupholders, a hidden magazine rack, remote holders, and it has to be assembled easily at home. I only want designers with previous experience in furniture design.
Category: Product Design       

M****030
 [?]
Sign in to view client's details.
| M****030 *
|    United States
Fixed Price: Not Sure   |  Posted: 8h, 55m ago  |  Ends: 14d, 15h  |   11 Proposals
CLARIFICATION: We DO NOT need renderings ! We need mill work shop drawings in order for the shop to build it. We need 3d views but they will be line drawings with dimensions. We need drawings to give to a woodworker so he can build this bar. We prefer you do the in autocad / sketckup but if you have other software just mention what you would like to use. Drawings must be in enough detail ( dimensions etc.) so the woodworker can order material and build it . We need plans, elevation details, section and 3d views ( 2 minimum) Attached is a rendering of the design for the bar. Also we have attached a bunk bed design we had done - this shows the quality of what we want for the desk. We do not have any files of the rendering of the bar - sorry/ Please just submit two examples of similar restaurant bars you have done - Please note submissions without a fixed fee will not be considered. Thanks
Category: CAD       
Skills: AutoCAD, SolidWorks, SketchUp Pro, AutoDesk Revit       

s****ner
 [?]
Sign in to view client's details.
| s****ner
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 15h, 23m ago  |  Ends: 14d, 8h  |   6 Proposals
Design using CAD/CAM programs(solidworks and camworks) CNC machines (installation applications & maintenance) EDM machines (installation application & maintenance) Raped prototype machines (application & maintenance) Vacuum casting machines (application & maintenance) Conventional machines (installation application & maintenance)
Category: CAD       

A****awy
 [?]
Sign in to view client's details.
| A****awy
|    Egypt
Fixed Price: Less than $500   |  Posted: 15h, 48m ago  |  Ends: 14d, 8h  |   0 Proposals
I am looking to create a frisbee for a new game i have invented. The frisbee needs to be approx 175g including the electronic timing device. What i hope to achieve is a frisbee that when thrown is just a normal frisbee, but when caught it activates a variable timer 2/3/4/5 sec. The timer then activates LED's to flash if the frisby is not spinning before the time has lapsed. The electronics need to be moulded within the plastic with access to the battery and the switch for on/off and varying the timer needs to be accessible. Finally the unit needs to be waterproof, sand proof etc. As this will predominantly be a beach game.
Category: Product Design       

a****808
 [?]
Sign in to view client's details.
| a****808
|    Australia
Fixed Price: Less than $500   |  Posted: 17h, 2m ago  |  Ends: 6d, 6h  |   13 Proposals
I need CAD drawings similar to the pipe/tubing of the attached image. I will supply the dimensions the curves will be left to you. I have the frame/chassis of the car and will give you the dimensions to work with the pipe/tubing. I will also spec the pipe OD and ID. Joints are to be welded and will be affixed to the car with clamp, nuts and bolts. $200.00 USD is too much for this job. Supplier must be able to communicate in English over the phone.
Category: CAD       
Skills: AutoCAD, AutoCAD 2012       

R****uma
 [?]
Sign in to view client's details.
| R****uma
|    United States
Fixed Price: Less than $500   |  Posted: 23h, 42m ago  |  Ends: 14d, 0h  |   20 Proposals
The purpose of this job is to design and fabricate a mold for some prototype parts I am developing. I have drafted most of the specifications and dimensions for the mold in Visio. I would need you to assess my proposal and offer solutions / changes needed to actually fabricate it.
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       
Preferred Location: North America

m****bes
 [?]
Sign in to view client's details.
| m****bes
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job