Save this Search
     
Sort by:
  • Posted Date
Fixed Price: $500 - $1,000   |  Posted: 1h, 32m ago  |  Ends: 14d, 22h  |   1 Proposal
Repost under company account of previous job posting: Hello, I need someone to some modifications to A20-Olinuxino-Lime-2-4G pcb from olimex. Board can be found at:   [obscured]  /Products/OLinuXino/A20/A20-OLinuXIno-LIME2-4GB/open-source-hardware And board files and schematic can be found at   [obscured]  /OLIMEX/OLINUXINO/tree/master/HARDWARE/A20-OLinuXino-LIME2 Basically I need the board profile made slightly larger so that all required connectors are on one side. Removal of battery port, UEXT, SATA, and GPIO headers. Addition of a few leds, and a fixed rs232 port with a certain configuration, and ideally getting a real time clock in there would be nice with battery backup. I also require the final files to be in gerber format for production with board house.
Category: Product Design       
Skills: PCB Design, Eagle       

a****8ca
 [?]
Sign in to view client's details.
| a****8ca
|    Canada
Fixed Price: Less than $500   |  Posted: 5h, 58m ago  |  Closed  |   5 Proposals
I have a sketch from roomsketchers.com that I need to convert into a blueprint to submit to my local county office for building permit. Attached is the sketch. I can also give you my login information to the website where I did this sketch. If you need more info I would be more than happy to provide it. This is my first time doing this so I apologize for the lack of knowledge. In terms of price, I really do not want to spend more than $100. Thanks.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

s****912
 [?]
Sign in to view client's details.
| s****912
|    United States
Fixed Price: Less than $500   |  Posted: 9h, 23m ago  |  Ends: 14d, 14h  |   4 Proposals
Design/engineering assistance is needed for a simple system including dual/parallel small linear track with a spanning (between the two tracks) rotating arm design. The ideal freelancer will be able to 1) provide at least 2 alternate manufacture/ assembly-friendly designs to accomplish the product concept in an 2) provide source information for inexpensive off-shelf parts (for somebody in the US to source) for most or all of the required components and 3) CAD images of the different components. At least one design should be simple and mechanical in function without the requirement of MEM systems. Priority should be given to an inexpensive, easy to produce and part-source design. The linear motion should take <2 seconds to advance and return to starting position and the arm rotation will be of a slow rotation. Neither will require substantial force. The arm should complete it's full rotation before at the very beginning portion of the linear movement. The system needs to ...
Category: Product Design       

M****RnD
 [?]
Sign in to view client's details.
| M****RnD
|    United States
Fixed Price: Not Sure   |  Posted: 9h, 24m ago  |  Ends: 6d, 14h  |   21 Proposals
Hi, I'm looking for 3D models that I can use to build a prototype. There will be about 4 pieces for the first concept I believe (I included a rough mockup, and put an 'x' on the parts I'm not interested in at this time). Its actually for a 'smart' product in the end, but this phase 1 concept will not include the electronics, just the housing. Once I get that right, I'll move into working with the electronics. Also, if it matters, product weight is not an issue. If anything I'd prefer it to be heavier than lighter. I'm looking for someone who has lots of experience in 3D modeling, specifically for parts being 3d printed, but would prefer someone who also understand materials as well as means & methods for production. Please be as descriptive as you can in your proposal, as I have never done anything like this before.
Category: Product Design       

M****ing
 [?]
Sign in to view client's details.
| M****ing
|    United States
Hourly Rate: $40 - $50 / hr   |  Duration: 1-2 weeks  |  Posted: 9h, 31m ago  |  Ends: 14d, 14h  |   0 Proposals
In this job we will need a continuous voice recognition that updates a listbox after every sentence spoken and uses Nuance . We do not believe this will take very long to do and need this done ASAP.
Category: Product Design       
Skills: Software Engineering       

m****vvy
 [?]
Sign in to view client's details.
| m****vvy
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 9h, 53m ago  |  Ends: 14d, 14h  |   8 Proposals
Need help preparing drawings for UL listing submittal. We have a dispensing system that is used to dispenser propane into vehicles that run on propane. We need assistance finishing the drawings for our UL submittal. Solidworks experience preferred.
Category: CAD       

j****ick
 [?]
Sign in to view client's details.
| j****ick
|    United States
Hourly Rate: $10 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: 9h, 53m ago  |  Ends: 14d, 14h  |   7 Proposals
I need an engineer familiar with plastics to advise me on which material; plastic, polypropylene, or alternative will yield the qualities I need in terms of flexibility/rigidity for my product. I have CAD drawings, 3D Printed prototypes, and detailed docs explaining the product needs. I may need a slight redesign based on the material chosen, but need to be advised on what change would be relevant in order to keep the functionality and aesthetics of the product. The design needs to be able to be manufactured using bulk manufacturing techniques. I have more attachments and detailed docs than the one attached here, but would like to get in touch with someone prior to providing all intellectual property.
Category: Product Design       

a****kle
 [?]
Sign in to view client's details.
| a****kle
|    United States
Fixed Price: Less than $500   |  Posted: 13h, 52m ago  |  Ends: 14d, 10h  |   14 Proposals
I need a simple drawing of a product similar to a toothpaste cap. I may also want a short video to demonstrate taking the cap on and off an item.
Category: Product Design       

c****new
 [?]
Sign in to view client's details.
| c****new
|    United States
Fixed Price: Not Sure   |  Posted: 15h, 18m ago  |  Closed  |   25 Proposals
2D Drafting Service for Residential Building - Floor Plans, Electrical, Furniture layout. Job needs to be completed asap
Category: CAD       
Skills: 3D Modeling, AutoCAD, Electrical Engineering       

o****guy
 [?]
Sign in to view client's details.
| o****guy
|    United Kingdom
Fixed Price: $1,000 - $5,000   |  Posted: 15h, 46m ago  |  Ends: 14d, 8h  |   2 Proposals
I am looking to find someone with extensive knowledge of chemicals to create an oral care product with SPECIFIC characteristics. Formula needs to take into account toxicity of ingredients, ability and cost to purchase ingredients smell taste and stability.
Category: Product Design       

O****Lah
 [?]
Sign in to view client's details.
| O****Lah
|    United States
Fixed Price: Not Sure   |  Posted: 18h, 2m ago  |  Ends: 29d, 5h  |   2 Proposals
We required Hardware and software Engineers for our New Project on contract . Skills Required : Hardware Engineer (Exp.>=5 Yrs): Expertise in Circuit design,Component selection,Working experience in wireless technologies-Bluetooth,Wifi,zigbee. Software Engineer (Exp.>=5 Yrs) : Expertise in Embedded software development. Working Experience in Programming of Wireless technologies- Bluetooth, WiFi, Zigbee. Note : Time and accuracy in work will be highly expected.
Category: Product Design       
Preferred Location: India

s****ics
 [?]
Sign in to view client's details.
| s****ics
|    India
Fixed Price: $20 - $25   |  Posted: 20h, 37m ago  |  Closed  |   21 Proposals
The design needs to be produced in auto cad from solid works which is in a drawing. Orthographic projection of both with dimensions only on the component and not on the assembly.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

V****ros
 [?]
Sign in to view client's details.
| V****ros
|    United Kingdom
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: Apr 23, 2015  |  Ends: 13d, 20h  |   33 Proposals
Searching for 3D designer to help create CAD file for printing of 3D prototype. Needs to take rought sketch and create a 3D CAD file to print protoype.
Category: CAD       
Skills: 3D Modeling, 3D Printing, 3D Design       

l****pee
 [?]
Sign in to view client's details.
| l****pee
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: Apr 23, 2015  |  Ends: 13d, 19h  |   7 Proposals
Hi everyone- I require assistance with MEP design and drafting on a 60,000 sf commercial project. Project is past the concept phase and ready for hard design. Looking for a designer/drafter who has experience with mechanical, electrical and/or plumbing (any one of those or all three, preferably all three). I will provide additional information on the project and make sure that you understand the scope prior to any agreement. US or Canada ONLY. Please type "MEP" at the start of your proposal so I know that you read this. Thanks!
Category: CAD       
Preferred Location: North America

b****215
 [?]
Sign in to view client's details.
| b****215
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 23, 2015  |  Ends: 13d, 17h  |   21 Proposals
This bracket is for a wall mounted loudspeaker bracket. We have DWG's of the bracket's component parts but these need to be assembled into a finished 2D bracket drawing with dimensions and multiple views, top, side & front. The finished drawing should use our standard title block as seen in the component drawings.
Category: CAD       
Skills: 3D Modeling, AutoCAD       

r****rby
 [?]
Sign in to view client's details.
| r****rby
|    United States
Fixed Price: Less than $500   |  Posted: Apr 23, 2015  |  Ends: 5d, 16h  |   27 Proposals
We have a basic design of a machine but would like to have some minor design changes made to make it look more modern. Looking for 3-4 different cosmetic designs. I would like to see something quickly for a design review.
Category: Product Design       

I****PRP
 [?]
Sign in to view client's details.
| I****PRP
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 23, 2015  |  Ends: 13d, 16h  |   5 Proposals
Development of a wireless hub that connects Bluetooth devices to the 3G cellular network. Device will be a wall plug-in device to operate off of 120VAC US wall outlets. The device will need to support HTTPS connections back to a central server. No user interface development is required. Full service development is required to get a product designed, prototyped and to pass certification testing and carrier acceptance testing for AT&T.
Category: Product Design       
Skills: Manufacturing Design, Electronics       

R****ogy
 [?]
Sign in to view client's details.
| R****ogy
|    United States
Fixed Price: Less than $500   |  Posted: Apr 23, 2015  |  Ends: 28d, 13h  |   1 Proposal
I am the proprietor of a unique sports specific shirt who originally found a terrific designer on Elance to help develop, design, and provide the tech pack and pattern for me. After several non-successful attempts trying to find someone who can help with this process of making a marker to use for sample production; I'm back on Elance!! I hope someone can help me out! Thanks, Dave
Category: Product Design       
Preferred Location: United States

d****d31
 [?]
Sign in to view client's details.
| d****d31
|    United States
Fixed Price: $80 or less   |  Posted: Apr 23, 2015  |  Ends: 13d, 12h  |   32 Proposals
I require an architect to draw a house plan to scale. It will be a bungalow with a bedroom and office upstairs. I can provide all measurements and an amateur drawing of the ground floor. Front, side and room elevations required.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       

J****agh
 [?]
Sign in to view client's details.
| J****agh
|    Ireland
Fixed Price: Not Sure   |  Posted: Apr 23, 2015  |  Ends: 13d, 12h  |   5 Proposals
I need someone to make a car in catia v5 imagine and shape following some instructions (dimensions). The freelancer will have to provide me the result as a surface and solid. Moreover I want you to record the entire process and provide me the video. I need a quick turnaround, no more that 3 days. P.S: I need you to work within this module so that the car can be easily modify.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, catia v5       

p****785
 [?]
Sign in to view client's details.
| p****785
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Apr 23, 2015  |  Ends: 13d, 11h  |   2 Proposals
An inventor is searching for an innovative, dependable and focused electrical engineer to help prototype a new product. The candidate should be a current undergraduate, or recent graduate, of a university engineering program. The ideal partner for this position is someone who can perform all design responsibilities for a project, from conception to completion. This position will involve designing a prototype, sourcing and pricing all parts, and assembling a working model of this small product. We are looking for someone who is interested in bringing his or her innovative ideas to the table while obtaining a hands-on opportunity that allows them to be a vital part of every project stage. Position Description & Responsibilities: ? The individual will be heavily involved in the design, engineering and project management through completion ? Direct communication with the project director throughout the project term ? Research, design and drafting of prototype ? Sourcing all part...
Category: Product Design       
Preferred Location: United States

M****ion
 [?]
Sign in to view client's details.
| M****ion
|    United States
Fixed Price: $100 - $2,000   |  Posted: Apr 23, 2015  |  Closed  |   7 Proposals
Must be able to start this contract within 2 days and meet the program (5 days) This job is to connect the hot rolled steelwork as shown on the enclosed BIM model steel frame for the UK. The contract is just to detail the hot rolled and cold rolled connections to the steelwork shown in the BIM model. All should be designed as shear connections in accordance with 'The Green Book' Moment connection designs will be provided Sample Cold rolled connection will be put on some members Standard UK plate sizes will be confirmed and must be used for all connections When complete, checked and altered, then farication drawings will need to be produced and editted Must be detailed in Tekla 18 or 19 The contract will be split into 2 stages: 1 Connecting the full model and completeing alterations from my comments 2 Producing fabrication information, including editted fabrication drgs and marking plans etc The total program for this contract will be no more than 5 days. Payments will be spli...
Category: CAD       
Skills: Tekla Structures       

P****mes
 [?]
Sign in to view client's details.
| P****mes
|    United Kingdom
Fixed Price: Less than $500   |  Posted: Apr 23, 2015  |  Ends: 13d, 4h  |   10 Proposals
We have en existing design / PCB which currently uses a ceramic chip antenna and Telit GE865 GSM module. We wish to replace the antenna with a PCB trace design, to be used with a revised PCB using SIMCOM SIM800H GSM/BLUETOOTH module. We require a trace antenna to support 4 GSM bands (850/900/1800/1900) and Bluetooth classic bands. The PCB layout will be revised but the overall shape and size cannot be changed Please see the attachment: AT200 design is an existing product / design that we have with PCB trace, for guidance, we will be looking for a similar design AT210 design shows the existing PCB with ceramic antenna, to be replaced with a similar design to the AT200, but adapted to suit the available space. We use ALTIUM Designer Summer 08. The design file will need to be compatible with that CAD package, ideally in a single polygon section. Alternatively we can accept a design with detailed dimensions and create our own polygon. This job is urgent. Ideally we are looki...
Category: CAD       
Skills: 3D Modeling, Altium Designer, AutoCAD       

p****lla
 [?]
Sign in to view client's details.
| p****lla
|    United Kingdom
Fixed Price: Less than $500   |  Posted: Apr 22, 2015  |  Closed  |   4 Proposals
I have the drafts for a bi-level home that I need in a professional format. I have all of the fixtures and furniture placed. The project is 1972 square feet and very basic. I need a 12 hour turnaround time.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       

T****rns
 [?]
Sign in to view client's details.
| T****rns
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job