Save this Search
     
Sort by:
  • Posted Date
Fixed Price: $75 or less   |  Posted: 51 minutes ago  |  Ends: 23h, 8m  |   4 Proposals
Auto cad drawing of silicon ring I need a simple auto cad drawing of a silicon ring ring is .85cm wide .15 cm thick 19 MM inside diameter It needs to have rounded outside edge and eased edge on inside....think wedding ring....no sharp edges see attached picture The only variation I need from the picture are small perpendicular lines approx .50mm deep, .50mm wide and 1.75mm apart around interior inside of ring. FYI: I am trying to make this ring a little more flexible and promote airflow to pass through when ring is placed on tool. I am open to suggestions. I need this done within 24 hours
Category: CAD       
Skills: AutoCAD, AutoCAD 2012       

p****y80
 [?]
Sign in to view client's details.
| p****y80
|    United States
Fixed Price: Not Sure   |  Posted: 8h, 28m ago  |  Ends: 14d, 14h  |   10 Proposals
Create 26.6cm (10.5") adjustable metal arm based on the attached image. Please also study this page:   [obscured]  /noga-arms-by-matthews.html Here is a video that demonstrates how the product will be used:   [obscured]  /94221520 Here are some specifics about the project: - Our design will include a 1/4-20 thumb-nut on the top rather than a recessed threaded hole. - File must be natively created in SolidWorks. - Submit .EASM files to me during the drafting stage. If you don't know what an .EASM file is, then please don't apply for this position. The first time I open your .EASM file it must open correctly. No accidentally suppressed features or geometry in the wrong place. Therefore, test your files before sending them to me. - Aesthetics matter. Be prepared for me to be very, very picky about the symmetry, beauty and aesthetic balance of your design. - You must speak English fluently. Thank you!
Category: Product Design       

h****agi
 [?]
Sign in to view client's details.
| h****agi
|    United States
Fixed Price: Not Sure   |  Posted: 12h, 59m ago  |  Ends: 14d, 10h  |   5 Proposals
Inkonova AB (based in Sweden) looks for an individual/freelancer to help us in a project. The project consists on the analysis and CFD simulations for a new design of a high speed competition golfdisc. The new design should have improved aerodynamics in terms of giving more range than a reference commercial disc we provide and stability. The person must have their own CFD software license or use open source programs. Can work remotely from anywhere (we sit in Stockholm though). Start: ASAP
Category: CAD       
Skills: CFD, computational fluid dynamics       

p****lol
 [?]
Sign in to view client's details.
| p****lol
|    Sweden
Fixed Price: Less than $500   |  Posted: 19h, 14m ago  |  Ends: 14d, 3h  |   23 Proposals
Make dimension changes to existing STP, DWG files and create new DXF files for lazer cutting. Take existing conveyor design files in stp and DWG and change length, change height of stands, extend motor section and create joiner to new section and new section same as motor section but with out motor - powered from the motor section. Increase roller pitch to 250mm. Create files for Lazer cutting Create Workshop/model/part drawings
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

c****ler
 [?]
Sign in to view client's details.
| c****ler
|    New Zealand
Hourly Rate: More than $50 / hr   |  Duration: 4-6 months  |  Posted: 21h, 17m ago  |  Ends: 14d, 1h  |   11 Proposals
Expertise in multiple machine learning and Bayes methods algorithms Experience with technical computing languages such as MATLAB or R Knowledge of C++, Python, or Java Experience with object-oriented design and implementation Ability to analyze raw data and analyze using gabor transform for speech and vibrational analysis a big plus
Category: Product Design       

r****esh
 [?]
Sign in to view client's details.
| r****esh
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-3 months  |  Posted: 23h, 10m ago  |  Ends: 13d, 23h  |   25 Proposals
Basic Purpose: ?Looking for an in-house CAD Drafter to develop build drawings leading to final product design and production documentation for manufacturing purposes. Position can last for 3-6 months and possibly longer. Located in Plainfield NJ. Position requires person to supply his/her laptop and preferred CAD application. ?Functional Responsibilities: ?Develop build drawings from concepts & conceptual drawings ?Produce designs for manufacturing purposes and CNC equipment ?Work with manufacturing during the assembly process Requirements and Qualifications: Intermediate / Advanced skill level in CAD/3D modeling, VectorWorks and Solid Works a plus ?Intermediate CNC programming skills a plus Excellent organizational skills ?Excellent communication skills. ?Team player Organizational Relationship: ?Position reports to Senior Design Manager. ?Salary: $25/hour plus, depending on skill level.(ID: 6942...
Category: CAD       

j****r3d
 [?]
Sign in to view client's details.
| j****r3d
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 26, 2015  |  Ends: 88d, 22h  |   10 Proposals
Looking for a very talented architect and 3d modeller for the following scope of work: No. 2 new conceptuall design in pla view and isometric 4 rendering for the designed approved elevations with textures with emasurements and floor plan with measurements list of material study used in the design and of course space for revisions as you know stunning final presentation with all view and textures etc.I will need also the CAD FILES Please let me have your quote The job will be developed in phase so the priority right now is to have No. 2 design concept for a jewellery kiosk Ideas for the visual style: CONTEMPORARY - MINIMALIST Preferred colors: WHITE Extra notes: THE JOB IS VERY URGENT - THE PHASE 1 CONCEPTUAL DESIGN
Category: CAD       
Skills: 3D Modeling, AutoCAD       
Preferred Location: Western Europe, Eastern Europe, Middle East & Central Asia, Central & South America

m****ano
 [?]
Sign in to view client's details.
| m****ano *
|    Canada
Fixed Price: $500 - $1,000   |  Posted: Feb 26, 2015  |  Ends: 5d, 18h  |   7 Proposals
We need a freight friendly packaging design for our product. The products (four of them) are large, in rough terms 50" x 20" x 20' and weighs 50lbs.We are seeking one solution for the four very similar styled procucts. The product is mostly wrought Iron, but easily bent. There are several accessories that need to be packed with the main product one of which are two glass plates. We do not want to use Polystyrene if possible, not for 'eco' reasons but more about cost. We need to be able to stabilise it for a journey from Europe to the USA by sea, then by truck to parts of the USA. If you have experience in developing simple effective solutions for large scale packaging like this, show us what you have done in this area and tell us how much to make the perfect solution for us. We will happily share more information including full CAD drawings and detail with people who we shortlist for this job.
Category: Product Design       

B****cca
 [?]
Sign in to view client's details.
| B****cca
|    New Zealand
Fixed Price: Less than $500   |  Posted: Feb 26, 2015  |  Ends: 13d, 16h  |   23 Proposals
We have a basic design of a machine but would like to have some minor design changes made to make it look more modern. Looking for 3-4 different cosmetic design changes.
Category: Product Design       

I****PRP
 [?]
Sign in to view client's details.
| I****PRP
|    United States
Fixed Price: Less than $500   |  Posted: Feb 25, 2015  |  Ends: 13d, 2h  |   14 Proposals
I need a chicken coop designed. It should be octagonal, high up off the ground on four post legs. It should have sides that open so I can clean it easily. Something like this   [obscured]  -media-cache-ak0.pinimg.com/236x/53/a5/2f/53a52f3e38988791980e967fbf135fb5.jpg Or like this:   [obscured]  /t/485370/new-octagon-coop-construction-underway-progress But about 3/4 the size. I need the design drawn up on Auto cade with supplies list so I can have a local carpenter build.
Category: CAD       
Skills: AutoCAD       

j****ser
 [?]
Sign in to view client's details.
| j****ser
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 25, 2015  |  Ends: 13d, 0h  |   11 Proposals
Hi There, We based in Asia, Singapore and have an invention that we would like to bring to a prototype stage. The idea is in it infancy, that said, we have a pretty strong understanding of what we want and the product features. I'd be looking for the following services to cover design and development of the product. Hardware Design and Testing, Prototypes etc. Product assessment and market viability. I.P Strategies and Patent viability. SWOT analysis, product assessment. Of course with all of the above we wil be involved at every level. We previously have designed products and patented them, but nothing like the current idea in discussion. The idea would require someone with engineering and technical know how to bring the product to life by engineering and designing a working prototype and ultimately manufacturing. I see on your profile you offer end to end solutions on the engineering side and the technology assessment side, we currently in the process to identify the right p...
Category: Product Design       

R****hpr
 [?]
Sign in to view client's details.
| R****hpr
|    Singapore
Fixed Price: Not Sure   |  Posted: Feb 25, 2015  |  Ends: 13d, 0h  |   18 Proposals
We are looking for someone, preferably an architect to work up some clean, elegant and unique 3D floor plans for commercial and Industrial properties we have. We are looking for someone who can create 3D floor plans for the following: 1. Site plan (interior and exterior) 2. Building 1 (interior and exterior) NOTE: this building is 2 stories 3. Building 2 (interior and exterior) 4. Building 3 (interior and exterior) 5. Building 4 (interior and exterior) 6. Building 5 (interior and exterior) Note: All of these building will be almost entirely empty (No furniture, machines, etc.) Here is some information of the project including CADs, photos, floor plans, elevations:   [obscured]  /1DkRpLb Some samples of work we like is also in here. Please contact me for explanation on how we see our project going. In your proposal please include the following: 1. Cost for complete the project 2. Turn around time 3. Any additional information you require from us 4. Examples of SIMILAR WORK that yo...
Category: CAD       

g****di1
 [?]
Sign in to view client's details.
| g****di1
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 25, 2015  |  Ends: 7d, 1h  |   7 Proposals
I require a preliminary drawing of a 16 metre motor catamaran hulls and bridgedeck. Candidate must have access to and experience with, boat building software. I have the drawings of a sailing catamaran of similar size but require a very simple study plan of a POWER catamaran, mainly the underwater shape. It will be strictly a FLAT PANEL construction using cad cut 16 mm fibreglass composite panels, cut from a basic production panel measuring 16 metres X 3 metres. The attached drawing is an EXAMPLE ONLY. The required drawings will differ.
Category: CAD       
Skills: Drawing, Drafting       

d****ton
 [?]
Sign in to view client's details.
| d****ton
|    Australia
Fixed Price: Not Sure   |  Posted: Feb 25, 2015  |  Ends: 12d, 23h  |   6 Proposals
I need someone to design a very simple rubber cuff for the macbook charger and iphone charger to keep the cords from breaking. It is a very simple and quick job, but you would have to make the measurements for the cords. I can provide a picture of how I want it to look, but I would like to hear suggestions as well if the freelancer I hire has any. P.S. This is an extremely simple design. Based on previous experiences working with engineers, I don't believe it will take more than 2 hours of your time.
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

y****ian
 [?]
Sign in to view client's details.
| y****ian
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 25, 2015  |  Ends: 12d, 23h  |   3 Proposals
I currently have a prototype for a new portable comfort headrest that was designed by one of the engineer. Overall, the design and prototype turned out fine. However, it needs a slight changing in terms of securing and adjusting it. Right now, the prototype carries a strap that holds the device behind any seats, but my concern is about safety, secured device and better idea to adjust the device instead of using straps. I would like to know, if you can finish the design with better secure and help me to built the new prototype as soon as possible. The project is done and design properly. As I mentioned, it just need a slight changing . This project won't take long. I will share the pictures of design and actual prototype as we go along. Also, I am looking for a packaging design for this portable headrest. Please contact me regarding this new product. Good day.
Category: Product Design       
Skills: 3D Modeling, Manufacturing Design       

h****l81
 [?]
Sign in to view client's details.
| h****l81
|    United States
Fixed Price: $50 - $100   |  Posted: Feb 25, 2015  |  Ends: 21h, 8m  |   48 Proposals
I need these PDF drawing to be converted back to Auto CAD format (2010 version). There are total of 10 sheets, which I have attached with this post, but not all sheets are full. I only need the following sheets to be converted at this time : T1, A1, A2, A3, A4, and A5. I don't need the border and areal maps (on sheet T1) to be converted. I need all text to be typed as shown on the plan here but in "MText" format. Tables and schedules are to be laid out as shown on the PDF plans. Use white color for line works, and cyan color for text. Room labels, doors and windows are to be in different layers. On your proposal, please provide fixed fee and estimate time of completion. I need this done ASAP.
Category: CAD       

W****ile
 [?]
Sign in to view client's details.
| W****ile
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 25, 2015  |  Ends: 4d, 20h  |   5 Proposals
SUMMARY: Two bracelets that communicate with each other. One as a transmitter, and the other as a receiver. DETAILS: 1) The product is designed so that a parent wearing a transmitting bracelet (parent bracelet) can press a button and the child wearing the receiving bracelet (child bracelet) receives a signal. The bracelet will have a look similar to that of a popular health bands. 2) We will also need to find a local place to manufacture these (ultimately, for the US market). So, you might need some connections to get this project ;-) 3) Please note that Bluetooth & WiFi are not what we are looking for. Because Bluetooth will not have enough range and WiFi is not always available in place like churches and other gatherings. Think more like a remote for a car.
Category: Product Design       
Preferred Location: India/Southern Asia, Eastern Asia

M****gue
 [?]
Sign in to view client's details.
| M****gue
|    United States
Fixed Price: Not Sure   |  Posted: Feb 25, 2015  |  Ends: 12d, 14h  |   14 Proposals
My company is looking to hire an engineer/designer who has experience engineering remote controlled vehicles. We are starting with a platform toy and would like to develop an extension that incorporates Bluetooth RC technology. We are looking for an engineer or team of engineers and designers with the following skillset: 1) Ability to work with us on initial concept design. 2) Must be well versed in designing around motors, battery supply, and Bluetooth technology. 3) We are a very experienced product development company but do not currently offer anything using this type of technology. We are looking for a team to help engineer the complex moving parts of this toy. We have established plastic manufacturing and are looking for the integration with RC technology. We will be making decisions based on work experience so please provide examples.
Category: Product Design       

a****gns
 [?]
Sign in to view client's details.
| a****gns
|    United States
Fixed Price: Not Sure   |  Posted: Feb 25, 2015  |  Ends: 12d, 12h  |   29 Proposals
Hello I'm looking for some body who can make 4 datasheet as samples PDF attached for 9 set of products I did with SW2014 (I'll provide SW2014 .SLDPRT filr for each part and layout for .SLDDRW) I have to get back all file and SLDDRW, PDF you will make on the original folder SLDDRW, PDF must be named ****_production datasheet ****_WL ****_WLM **** After thta I will need rendering to show how to use my product
Category: CAD       
Skills: 3D Modeling, SolidWorks       

j****nod
 [?]
Sign in to view client's details.
| j****nod
|    United States
Fixed Price: Not Sure   |  Posted: Feb 25, 2015  |  Ends: 12d, 11h  |   22 Proposals
Hello, I am in search of an experienced engineer, design engineer, or project developer who is knowledgeable in 3D design and problem solving. The project is a standard cap/ lid which will undergo changes or enhancements within the cap/lid to perform a one stroke function. The cap will then after be placed on a round container to serve its overall purpose. The cap will be plastic in nature without intricate functionality. The cap/lid currently has its own internal/external design and your job would be to make appropriate changes or enhancements to the cap/lid so that it will function as such. The job is not high tech or sophisticated, but does require problem solving for proper function. If you have further questions please ask Thanks, Don
Category: CAD       

s****don
 [?]
Sign in to view client's details.
| s****don
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Feb 25, 2015  |  Ends: 12d, 11h  |   47 Proposals
We need a guy you can help us in modeling the 3D and make a nice drawings We allready have some 2D drawing but not in the german industrial standard As example we have some drawings as reference
Category: CAD       
Skills: 3D Modeling, SolidWorks       

m****l24
 [?]
Sign in to view client's details.
| m****l24
|    Germany
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 24, 2015  |  Ends: 12d, 4h  |   9 Proposals
Looking for a LICENSED Architect /Interior Designer to convert my one bedroom apartment to a two bedroom apartment. Must have experience with apartment living designs, think Apartmenttherapy.com. Need to see portfolio pieces of urban interior apartment design. Style should be modern.
Category: CAD       
Skills: 3D, AutoCAD, 3D Design, 3D Rendering       
Preferred Location: United States

G****a20
 [?]
Sign in to view client's details.
| G****a20
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 24, 2015  |  Ends: 12d, 2h  |   15 Proposals
TALENTED ARCHITECT AND PROVEN SKILLS IN AUTOCAD AND 3D MODELLING. GREAT CREATIVITY AND PROFESSIONAL PRESENTATION ARE A MUST. LOOKING FOR A LONG BUSINESS RELATIONSHIP FOR DESIGNING BUILDING FROM SCRATCH. THE CANDIDATE MUST HAVE EXCELLENT KNOWLEDGE OF ARCHITECTURE AND STUNNING IDEAS AND CREATIVITY. 3D MODELLING MUST BE PERFECT AND LOOK VERY VERY PHOTOREALISTIC POST PRODUCTION PHOTOSHOP EDIT IS A MUST TOO. CANDIDATE MUST SUPPLY PORTFOLIO. ALSO EMAIL AND SKYE CONTACT
Category: CAD       

m****ano
 [?]
Sign in to view client's details.
| m****ano *
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 24, 2015  |  Ends: 11d, 18h  |   12 Proposals
I'm in need of a product design and manufacturing engineer to prepare my product for manufacturing so that I can bring it to market. The idea is a fairly simple plastic zippered type bag and I already have the drawings from the provisional available. I'm looking for someone who also has connections with manufacturers.
Category: CAD       
Preferred Location: United States

S****133
 [?]
Sign in to view client's details.
| S****133
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job