Save this Search
     
Sort by:
  • Posted Date
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 2h, 32m ago  |  Ends: 14d, 20h  |   1 Proposal
I am looking to get a few things quoted before moving on to the actual development phase. First, here is a description of what I need... PRODUCT: Soundproof drum mat designed to significantly reduce decibel levels put out by an acoustic drum kit Main benefit: Achieve results of a soundproofed room in a drum mat (in other words, the highest level of soundproofing possible) DESCRIPTION: The idea was to develop a mat or platform that your entire drum kit would sit on. Measurements: 6 - 1/6 ' x 5' (length x width of my drum kit) Height / thickness doesn't matter and depends on the necessary layers of soundproofers needed to achieve the results Like standard drum mats it should be - Mobile - Easy to set up - Durable (in fact more durable than standard drum mats) - Protects drums - Slip proof (for you and your drums) Please see the product research I had done for more information, plausibility, and ideas. And please ask questions as needed. Before moving forward, please tell m...
Category: Product Design       

T****zur
 [?]
Sign in to view client's details.
| T****zur
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 5h, 5m ago  |  Ends: 14d, 17h  |   8 Proposals
Hi, We have two plans that we need the garden, interlock, sod, etc. areas taken off. Is this something that you would have time to do this week? Thanks
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       

T****J_O
 [?]
Sign in to view client's details.
| T****J_O
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 7h, 0m ago  |  Ends: 14d, 15h  |   5 Proposals
I need a CNC file - in Artcam for 2 countertop Bookmark displays. I am attaching photo and similar design drawing for Gift Cards. Bookmarks are 1.5" wide by 7" high. I need one display to hold 6 bookmarks and one display to hold 12. I would like the dividers NOT to protrude beyond the bottom faceplate so I can engrave or print on that piece. Material to be made from Standard 6mm Baltic Birch Plywood and fabricated with a CNC Router Please ask if you need more information
Category: Product Design       
Skills: 2D Design, CNC Programming       

w****rnh
 [?]
Sign in to view client's details.
| w****rnh
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: 7h, 41m ago  |  Ends: 14d, 15h  |   17 Proposals
Hi Guys, I have re-posted this project in a different format due to not being able to obtain the appropriate freelancers previously. I require a suitably qualified and well experienced CAD/Solidworks etc etc designer to design custom plastic and injection moulded covers for us upon request. We currently have several products and material that we require a designer to put this into a design program and design our products also so as we can send these designs directly to the manufacturer to manufacture. This will be ongoing work and we require highly experienced freelancers and the work must be to the highest of quality and standards. Good luck bidding and look forward to getting this project rolling! Regards, Nick
Category: CAD       

N****089
 [?]
Sign in to view client's details.
| N****089
|    Australia
Fixed Price: $500 - $1,000   |  Posted: 16h, 36m ago  |  Ends: 14d, 6h  |   11 Proposals
Looking for a very talented architect and 3d modeller for the following scope of work: No. 2 new conceptual design in plan view and isometric, low resolution rendering 4 rendering for the designed approved elevations with textures with measurements and floor plan with measurements list of material study used in the design and of course space for revisions as you know stunning final presentation with all view and textures etc.I will need also the CAD FILES The job will be developed in phase so the priority right now is to have No. 2 design concept for a jewellery kiosk Ideas for the visual style: CONTEMPORARY - MINIMALIST Preferred colors: WHITE Extra notes: THE JOB IS VERY URGENT - THE PHASE 1 CONCEPTUAL DESIGN
Category: CAD       
Skills: Adobe Photoshop, 3D Modeling, AutoCAD       
Preferred Location: Western Europe, Eastern Europe, Middle East & Central Asia, Central & South America

m****ano
 [?]
Sign in to view client's details.
| m****ano *
|    Canada
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 17h, 36m ago  |  Ends: 14d, 5h  |   5 Proposals
LOOKING FOR A TALENTED ARCHITECT FOR CAD AND PHOTOSHOP FINAL STUNNING PRESENTATION AND TECHNIQUES INFO WILL FOLLOW SEPARATELY
Category: CAD       

m****ano
 [?]
Sign in to view client's details.
| m****ano *
|    Canada
Fixed Price: Less than $500   |  Posted: 17h, 50m ago  |  Ends: 14d, 5h  |   4 Proposals
I am looking for someone to help me source Chinese electronics (headphones) manufacturers so I can find someone to produce my product. Please respond if you have experience with this.
Category: Product Design       
Skills: Product Design, sourcing       

j****ham
 [?]
Sign in to view client's details.
| j****ham
|    Canada
Fixed Price: About $20   |  Posted: 19h, 57m ago  |  Ends: 14d, 3h  |   5 Proposals
Must have EXCELLENT ENGLISH SPEAKING/WRITING SKILLS. Please be experienced in all aspects of international trade, including sourcing, customizing for private label, packaging, & shipping. This job has a fixed fee to see ONE PRODUCT successfully negotiated, prepped for private label, sample shipped, and up to the point of securing a large order. I will give you an exact product to source. I only want the product submitted, no substitutes. This job will lead to multiple repeat jobs based on your performance and sourcing speed. must have the ability to take good pictures and communicate in a timely manner.
Category: Product Design       
Preferred Location: China

V****cha
 [?]
Sign in to view client's details.
| V****cha
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 20h, 49m ago  |  Ends: 6d, 2h  |   1 Proposal
Hello, I am a cosmetic product developer launching my own line of products. I will start with a set of color products for which I need assistance developing. Working with various skincare contract labs in my career, I am totally familiar with the the product development cycle. I work a full-time job, so what I am looking for is a chemist to do the initial development work, build formulas and create prototypes for my launch in June. At that point, if you have the capabilities to produce a small quantity of samples, we can work together on that. If not, I may take the formulas to a contract lab with a low minimum order. YOU MUST BE ADEPT WITH COLOR DEVELOPMENT. You are: -reliable -experienced in color chemistry -Familiar with the color product market Although my budget is limited in this phase of the project, we can discuss a price and timeline that works for both of us.
Category: Product Design       

a****uve
 [?]
Sign in to view client's details.
| a****uve
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 23h, 34m ago  |  Ends: 13d, 23h  |   15 Proposals
Overview: this will be a temperature, humidity and moisture monitoring system. The system will consist of one main unit and multiple sensors. The main unit will be capable of receiving data from the sensors, storing the data it receives from the sensors and transmitting the data it receives from the sensors to a smartphone app. The system will also consist of sensors that will measure the temperature of a room, the relative humidity of a room and the level of moisture present in a material such as a cardboard box. The sensors will be able to transmit this information on an hourly based to the main unit. A user will be able to access the main unit via a smartphone app for both IOS and Android and view the data that is being stored in the main unit. Both the main unit and the sensors must have an identification number so that it can be uniquely identified when being use in conjunction with others. Example; I will have more than one of these systems running in separate locations. While aw...
Category: Product Design       
Skills: Electronic Design       

s****kus
 [?]
Sign in to view client's details.
| s****kus
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Mar 01, 2015  |  Ends: 13d, 18h  |   2 Proposals
Hello Ink & Fiber, The product we're developing is a little unusual in that it is not apparel, it is a fabric cover for an outdoor product. It's similar in nature to a patio furniture cover, so it will need to be manufactured in a tough waterproof material with a large commercial zipper or ties. We are looking for someone to offer ideas on modifying the design for ease of manufacture based upon a sketch. After the design is solidified, we would like to see it as photorealistic as possible to be used in materials such as sell sheets and on a website. I realize most of your experience is in the apparel industry and I want to be sure we find the right match for this project so as to not waste both of our time. If you feel it is out of scope with your abilities, we would appreciate your honesty in that respect when deciding whether to accept the job or not. We look forward to hearing from you. Thanks! -Todd Miner
Category: Product Design       
Skills: Industrial Design, Textile Engineering       

d****dix
 [?]
Sign in to view client's details.
| d****dix
|    United States
Fixed Price: Less than $500   |  Posted: Mar 01, 2015  |  Ends: 5d, 9h  |   24 Proposals
This project is to create a 3d printable cover for the multicopter that can be bolted on through the slots in the arms. The cover should have a noticeable front and back and leave sufficient space for the propellers.
Category: CAD       
Skills: 3D Modeling, 3D Printing, 3D Design       

r****boy
 [?]
Sign in to view client's details.
| r****boy
|    Canada
Fixed Price: Not Sure   |  Posted: Feb 28, 2015  |  Ends: 13d, 6h  |   5 Proposals
We are wanting to develop a small scale educational simulator/model of a typical New Zealand rotary cow shed. Here is a video clip of a rotary cow shed in action.   [obscured]  /watch?v=jpsV-zTVzF4 Note: This project only requires the 'cows' to be developed. We are wanting to demonstrate how to maximise the efficiency in a rotary milking system. We are wanting to demonstrate the principles covered on this site:   [obscured]  /milking/in-the-dairy/rotary/ To do this we intend: 1. Adapting (rebuilding) an lp record player, something like this (  [obscured]  /watch?v=W60ZmpdiKlo) as the model rotary cowshed platform - where the cows stand. We will slow the speed down to the actual speed in the cow shed above and also make the circumference larger to cater for the model cows. 2. Obtaining some small scale model cows (we need to fit approximate 30-40 around the circumference). This is where this project commences. We want you to assist us by: 3. ...
Category: Product Design       

v****nza
 [?]
Sign in to view client's details.
| v****nza
|    New Zealand
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: Feb 28, 2015  |  Ends: 1d, 1h  |   11 Proposals
I have an existing Catia V5 R21 CATproduct file that needs to be modified with removals and additions to be made to the model. The product is for an electronic circuit card housing. This is not a large job and I anticipate that it can be done in around 15 hours. I will collaborate via Skype and/or NetMeeting to explain and review the changes. The deliverable is an updated Catia V5 R21 CATproduct file.
Category: CAD       
Skills: 3D Modeling, CATIA       

c****ots
 [?]
Sign in to view client's details.
| c****ots
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 28, 2015  |  Ends: 12d, 20h  |   13 Proposals
We have a design and are looking for professionals to develop a prototype for manufacturing. The device will used for communications by campus personnel during crisis or emergency. The device will connect through WiFi to other devices and central server.
Category: CAD       

S****afe
 [?]
Sign in to view client's details.
| S****afe
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 28, 2015  |  Ends: 12d, 12h  |   1 Proposal
I recently downloaded Fusion 360 and am looking for a tutor that I can pay hourly to train me via google hangouts or skype. You will need to be fluent in English and speak clearly. I would like to get up to speed quickly. I am located in the Eastern Time Zone so you should be able to work during these hours. I have no rendering or modeling experience. Please send your hourly wage along with your schedule and google hangouts/skype info.
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD, fusion 360       

c****913
 [?]
Sign in to view client's details.
| c****913
|    United States
Fixed Price: Not Sure   |  Posted: Feb 27, 2015  |  Ends: 11d, 17h  |   24 Proposals
Create 26.6cm (10.5") adjustable metal arm based on the attached image. Please also study this page:   [obscured]  /noga-arms-by-matthews.html Here is a video that demonstrates how the product will be used:   [obscured]  /94221520 Here are some specifics about the project: - Our design will include a 1/4-20 thumb-nut on the top rather than a recessed threaded hole. - File must be natively created in SolidWorks. - Submit .EASM files to me during the drafting stage. If you don't know what an .EASM file is, then please don't apply for this position. The first time I open your .EASM file it must open correctly. No accidentally suppressed features or geometry in the wrong place. Therefore, test your files before sending them to me. - Aesthetics matter. Be prepared for me to be very, very picky about the symmetry, beauty and aesthetic balance of your design. - You must speak English fluently. Thank you!
Category: Product Design       

h****agi
 [?]
Sign in to view client's details.
| h****agi
|    United States
Fixed Price: Not Sure   |  Posted: Feb 27, 2015  |  Ends: 11d, 13h  |   17 Proposals
Inkonova AB (based in Sweden) looks for an individual/freelancer to help us in a project. The project consists on the analysis and CFD simulations for a new design of a high speed competition golfdisc. The new design should have improved aerodynamics in terms of giving more range than a reference commercial disc we provide, and better stability. The person must have their own CFD software license or use open source programs. Can work remotely from anywhere (we sit in Stockholm though). Start: ASAP
Category: CAD       
Skills: CFD, computational fluid dynamics       

p****lol
 [?]
Sign in to view client's details.
| p****lol
|    Sweden
Hourly Rate: More than $50 / hr   |  Duration: 4-6 months  |  Posted: Feb 26, 2015  |  Ends: 11d, 4h  |   11 Proposals
Expertise in multiple machine learning and Bayes methods algorithms Experience with technical computing languages such as MATLAB or R Knowledge of C++, Python, or Java Experience with object-oriented design and implementation Ability to analyze raw data and analyze using gabor transform for speech and vibrational analysis a big plus
Category: Product Design       

r****esh
 [?]
Sign in to view client's details.
| r****esh
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-3 months  |  Posted: Feb 26, 2015  |  Ends: 11d, 2h  |   37 Proposals
Basic Purpose: ?Looking for an in-house CAD Drafter to develop build drawings leading to final product design and production documentation for manufacturing purposes. Position can last for 3-6 months and possibly longer. Located in Plainfield NJ. Position requires person to supply his/her laptop and preferred CAD application. ?Functional Responsibilities: ?Develop build drawings from concepts & conceptual drawings ?Produce designs for manufacturing purposes and CNC equipment ?Work with manufacturing during the assembly process Requirements and Qualifications: Intermediate / Advanced skill level in CAD/3D modeling, VectorWorks and Solid Works a plus ?Intermediate CNC programming skills a plus Excellent organizational skills ?Excellent communication skills. ?Team player Organizational Relationship: ?Position reports to Senior Design Manager. ?Salary: $25/hour plus, depending on skill level.(ID: 6942...
Category: CAD       

j****r3d
 [?]
Sign in to view client's details.
| j****r3d
|    United States
Fixed Price: $500 - $1,000   |  Posted: Feb 26, 2015  |  Ends: 2d, 22h  |   12 Proposals
We need a freight friendly packaging design for our product. The products (four of them) are large, in rough terms 50" x 20" x 20' and weighs 50lbs.We are seeking one solution for the four very similar styled procucts. The product is mostly wrought Iron, but easily bent. There are several accessories that need to be packed with the main product one of which are two glass plates. We do not want to use Polystyrene if possible, not for 'eco' reasons but more about cost. We need to be able to stabilise it for a journey from Europe to the USA by sea, then by truck to parts of the USA. If you have experience in developing simple effective solutions for large scale packaging like this, show us what you have done in this area and tell us how much to make the perfect solution for us. We will happily share more information including full CAD drawings and detail with people who we shortlist for this job.
Category: Product Design       

B****cca
 [?]
Sign in to view client's details.
| B****cca
|    New Zealand
Fixed Price: Less than $500   |  Posted: Feb 26, 2015  |  Ends: 10d, 19h  |   23 Proposals
We have a basic design of a machine but would like to have some minor design changes made to make it look more modern. Looking for 3-4 different cosmetic design changes.
Category: Product Design       

I****PRP
 [?]
Sign in to view client's details.
| I****PRP
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 25, 2015  |  Ends: 10d, 3h  |   11 Proposals
Hi There, We based in Asia, Singapore and have an invention that we would like to bring to a prototype stage. The idea is in it infancy, that said, we have a pretty strong understanding of what we want and the product features. I'd be looking for the following services to cover design and development of the product. Hardware Design and Testing, Prototypes etc. Product assessment and market viability. I.P Strategies and Patent viability. SWOT analysis, product assessment. Of course with all of the above we wil be involved at every level. We previously have designed products and patented them, but nothing like the current idea in discussion. The idea would require someone with engineering and technical know how to bring the product to life by engineering and designing a working prototype and ultimately manufacturing. I see on your profile you offer end to end solutions on the engineering side and the technology assessment side, we currently in the process to identify the right p...
Category: Product Design       

R****hpr
 [?]
Sign in to view client's details.
| R****hpr
|    Singapore
Fixed Price: Not Sure   |  Posted: Feb 25, 2015  |  Ends: 10d, 3h  |   24 Proposals
We are looking for someone, preferably an architect to work up some clean, elegant and unique 3D floor plans for commercial and Industrial properties we have. We are looking for someone who can create 3D floor plans for the following: 1. Site plan (interior and exterior) 2. Building 1 (interior and exterior) NOTE: this building is 2 stories 3. Building 2 (interior and exterior) 4. Building 3 (interior and exterior) 5. Building 4 (interior and exterior) 6. Building 5 (interior and exterior) Note: All of these building will be almost entirely empty (No furniture, machines, etc.) Here is some information of the project including CADs, photos, floor plans, elevations:   [obscured]  /1DkRpLb Some samples of work we like is also in here. Please contact me for explanation on how we see our project going. In your proposal please include the following: 1. Cost for complete the project 2. Turn around time 3. Any additional information you require from us 4. Examples of SIMILAR WORK that yo...
Category: CAD       

g****di1
 [?]
Sign in to view client's details.
| g****di1
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job