Save this Search
     
Sort by:
  • Posted Date
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 08, 2016  |  Ends: 10d, 10h  |   12 Proposals
Hi. I am looking for someone to do schematic drawings for our line of picture frames. I will show you photos and you will draw the schematic drawings for our vendors. Please describe any relevant experience and the word WHITE RABBIT on your response. Thanks
Category: Product Design       

a****lat
 [?]
Sign in to view client's details.
| a****lat
|    United States
Fixed Price: Less than $500   |  Posted: Jan 19, 2016  |  Closed  |   7 Proposals
Hello, I want you to design 5- stage Pipelined 32 bit Mips Processor. I would attach the manual explaining the whole project and i will give you the memory on which you need to make the processor work and you need to make the processor work for the square root and Fibonacci code which are given along with memory. I can give you further details who are interested in this project.
Category: Electrical       
Skills: Electronics, Computer Hardware Design       

****
 [?]
Sign in to view client's details.
| Client
|    Sweden
Fixed Price: $50 - $200   |  Posted: Dec 16, 2015  |  Closed  |   26 Proposals
Hi I need someone who is very experience in industrial plastic design that can quickly deliver 3 st concept drawings for our product. This needs to be a job that can be completed quickly. Requirements: - Someone that have design household products before. - Someone that have experience with 3d design and printing. - Someone who has at lest 300 hours on elance - Someone who has a 5 star rating - Someone who takes pride in their work and makes polished looking products. - Someone who speaks English well Here's what you need to do next: Please reply with examples of your previous work including any products or design examples you have done before. If I like your previous work, I will reply and give you more details. *** IMPORTANT when you reply start by typing the code words: Plastic-design This way i know you took the time to read the complete description instead of just replying to all new submission like many people do ! Thanks, Johan
Category: Product Design       

d****ert
 [?]
Sign in to view client's details.
| d****ert
|    Norway
Fixed Price: Not Sure   |  Posted: Dec 14, 2015  |  Closed  |   0 Proposals
You will be required to design a 'Night Timer' system .The timer should have four 7-segment LEDs i.e. should count up to 59 minutes 59 seconds in increment of 1 second.there should be a pause and reset button. 1. Four 7-segment RED LEDs. 2. One PAUSE button and one RESET button to pause and reset the timer as needed. 3. You need to use and configure a Light Dependent Resistor for that purpose. (Note: Multisim does not make provision for LDRs so to simulate your design you have to use an Opto-coupler and potentiometer combination to represent the LDR). 4. You need to use a step-down transformer as the system will have a 230V AC supply and the timer should operate on 9V DC. 5. You MUST ONLY use the following components in your design: Power Source, Transformer, Optocoupler, Potentiometer, switches, LED Display, Resistors, Capacitors, Transistors, Diodes, Basic logic gates ICs, Decoders, Timers, Counters and Flip-Flops. 6. You CANNOT use Programmable ICs, Micro-controllers or M...
Category: Electrical       

k****shg
 [?]
Sign in to view client's details.
| k****shg
|    Mauritius
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Dec 11, 2015  |  Closed  |   4 Proposals
I need help studying for my electrical engineering exam. This course is about Electric Machines and Power Systems. I am looking for someone who knows this subject matter very well. I need help with the following subjects: Electro-mechanical Energy Conversion Principles Rotating Machines Synchronous Machines Polyphase Induction Machines (Asynchronous Machines)
Category: Electrical       

d****065
 [?]
Sign in to view client's details.
| d****065
|    Canada
Fixed Price: Not Sure   |  Posted: Dec 10, 2015  |  Closed  |   14 Proposals
I'm a musician and see a void for a product that is existing but simply is not made on the level it can be anymore. I have exact ideas of how the new product should be but have no experience with product design and 3D modeling for production. It is about a metal mute made for brass instruments in this case starting with a trombone mute. For more info show me your interest in this job. I prefer someone in the Netherlands to be able to work closely together on this.
Category: Product Design       
Skills: Industrial Design, Product Design       
Preferred Location: Netherlands

M****Bro
 [?]
Sign in to view client's details.
| M****Bro
|    Netherlands
Fixed Price: Not Sure   |  Posted: Dec 10, 2015  |  Closed  |   6 Proposals
I'm a musician and see a void for a product that is existing but simply is not made on the level it can be anymore. I have exact ideas of how the new product should be but have no experience with product design and 3D modeling for production. It is about a metal mute made for brass instruments in this case starting with a trombone mute. For more info show me your interest in this job. I prefer someone in the Netherlands to be able to work closely together on this.
Category: Product Design       
Preferred Location: Netherlands

M****Bro
 [?]
Sign in to view client's details.
| M****Bro
|    Netherlands
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Dec 09, 2015  |  Closed  |   2 Proposals
Hello, I'm taking stochastic processes course and the professor will post an extra homework for bonus on Dec 15th, 3:30 pm (Central time zone). Its due 24 hours. So, I'll need ur help then. The book we use: "Introduction to probability models", 10th ed, by Sheldon Ross. U can find a free pdf copy online. The topics covered in this bonus HW: Poisson Process (Ch5), Continuous time Markov chains (Ch6), Renewal Process (Ch7), & Queuing Theory (Ch8). Please take a look at the topics in the book and let me know if u will be available by then as we need to coordinate. Looking forward hearing from u soon. Thanks, Kamal
Category: Electrical       

k****311
 [?]
Sign in to view client's details.
| k****311
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Dec 09, 2015  |  Closed  |   6 Proposals
Looking for an Electrical Engeineer with experience and knowledge in Power Systems, specifically the technology involved in Power strips and Surge Protectors. The product is in it's early stages and would like someone that is able to engineer and design for manufacturing. I live in Westchester, New York. Although not an absolute necessity, it is preferable I find someone in the New York City area. Thank you.
Category: Electrical       

F****Y00
 [?]
Sign in to view client's details.
| F****Y00
|    United States
Fixed Price: Less than $500   |  Posted: Dec 09, 2015  |  Closed  |   13 Proposals
Hello, I'm looking to hire someone able to create technical illustrations. The idea is for a protein powder dispenser that people can keep on their benchtops. Ideally, it will be someone who is familiar with protein shakes, supplements and taking protein powder or powder products on a regular basis. I've attached an example but I don't want it to look like that. Ideally, I would like the dispenser to incorporate the following features: - Stand upright and able to handle 1kg of protein powder - Dispense the exact scooper amount of 30gm with the push of a button or turning lever - Countdown timer that can know how many scoops the user has left until they need to refill e.g. 1kg gives someone 30 scoops; and it counts down until zero. (user sets the initial number of scoops to count down) Thank-you. Compulsory Requirements: - Previous experience creating technical illustrations, blueprints or designs - Three examples of previous work - Will need to provide completion date and numbe...
Category: Product Design       
Skills: Illustration       

****
 [?]
Sign in to view client's details.
| Client
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Dec 08, 2015  |  Closed  |   5 Proposals
This is a small job. I am building a radio controlled vehicle . I need someone to draw a clear wiring diagram for me, to wire a T6EHP-E radio transmitter with R6EH receiver to 4 - Pololu 18v7 simple motor controllers. The left joy stick needs to operate 2 dc motors (tank style steering). These channels need to be "mixed" The right joystick (forward /back)needs to operate a dc up/down linear actuator, and a toggle switch needs to switch a dc motor on/off. Anyone interested in doing this at a fixed price? I need someone who is experienced in RC. Richard
Category: Electrical       

b****ird
 [?]
Sign in to view client's details.
| b****ird
|    Canada
Fixed Price: About $25   |  Posted: Dec 08, 2015  |  Closed  |   1 Proposal
I have already the code and everything, just need to change some values and run it. This task is urgent now and start and finish within an hour Thanks
Category: Electrical       
Skills: MATLAB       

a****a24
 [?]
Sign in to view client's details.
| a****a24
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Dec 06, 2015  |  Closed  |   15 Proposals
Hello, my name is Russ, I live in Sarasota and I would like for you to give me a price to build a small project for me. I would like to have two potentiometers control two stepper motors. Please see attachment
Category: Electrical       

f****225
 [?]
Sign in to view client's details.
| f****225
|    United States
Fixed Price: Less than $500   |  Posted: Dec 03, 2015  |  Closed  |   25 Proposals
A box with a sliding bottom. When open, you can place box over the pest and using a switch, slide the floor of the box closed trapping the pest inside. The trapping box should have a handle which is flexible and can hold the form you make (like flexible flashlight) so you can maneuvre the box to trap a pest at any angle. Device should be usable with one hand. Please provide a graphic example of any potential designs. The final deliverable will be a 3D model of the apparatus so that I can print it out on a standard 3D printer.
Category: Product Design       

c****m66
 [?]
Sign in to view client's details.
| c****m66
|    Canada
Fixed Price: Less than $500   |  Posted: Dec 03, 2015  |  Closed  |   6 Proposals
I am lookng for someone to who as Past REVIEWS and Great Testimonials in Product Development If you can supply me past reviews /testimonials some of your past work in this niche I am looking for a Info Product that teaches small Entrepreuers to 1) Where to raise Capital for their smalll Business? a) Example Forums, Blogs, Angel Network ? 2) What is a Business Plan? Provide Samples of Business Plans or 3) Expose them to the software at use   [obscured]   4) Tell Entreprueres/ Startup what is needed to present to get a Investor interested 5) Teach us Entrepruers what is all that Venture capitalist/ Investors needs done in a Pitch to them to get their attention 6) Explain in the Info Product the difference between a Investor and a Venture capitalist if there is any Fnx 7) The product must teach what it is that makes investor interested to do business with u/us ? Eg is is it Personality along with the Figures/Fianancials? 8) What s is that will get a I...
Category: Product Design       
Skills: Product Design       

J****935
 [?]
Sign in to view client's details.
| J****935
|    Cayman Islands
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Dec 03, 2015  |  Closed  |   11 Proposals
We are looking for an expert to design custom security cell phone software. Product Designer will need expertise with GSM or CDMA technologies. Candidates will need to be aware of current 3GPP standards as well as LTE technologies. Viable candidates will be given a detailed explanation of the project after signing a confidentiality and non disclosure
Category: Product Design       

l****nts
 [?]
Sign in to view client's details.
| l****nts
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Dec 03, 2015  |  Closed  |   4 Proposals
I need a program in Allen Bradley rs logix 5000 for the crystallization process of sugar.i want the program for only one batch.There are approximately 6 control valves.All info will be provided.
Category: Electrical       
Skills: PLC & SCADA       

d****n14
 [?]
Sign in to view client's details.
| d****n14
|    Mauritius
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Dec 02, 2015  |  Closed  |   6 Proposals
I need to solve three problems for the course "semi conductors" it does not seem to be hard, but I have to travel and I have no time to spend on it.
Category: Electrical       
Skills: Semiconductor       

f****230
 [?]
Sign in to view client's details.
| f****230
|    United States
Fixed Price: Less than $500   |  Posted: Dec 02, 2015  |  Closed  |   10 Proposals
We are looking for Smart home automation with capacitive touch buttons and with remote Specification : 4 touch button control to operate lights( on & off + dimming control and fans ( on & off + regulate the fan speed). Components of this project should be economical and readily available For the Switching please use SCR family devices( Traic , Mosfet , thyristors etc ) It should also be controlled using ir or rf control remote Deliverable: Schematic BOM Source code
Category: Electrical       

****
 [?]
Sign in to view client's details.
| Client
|    Oman
Fixed Price: Less than $500   |  Posted: Dec 02, 2015  |  Closed  |   3 Proposals
mistake lab1 Matlab question 1c lab2 prelab(mathematical calculation) question 1f-part d (part "f" we need to repeat all from a-e and "d" part is wrong) prelab question 2,c,d,e,f. Matlab part needs to be updated.
Category: Electrical       
Skills: MATLAB, Matlab signal processing       

x****iee
 [?]
Sign in to view client's details.
| x****iee
|    Sweden
Fixed Price: Less than $500   |  Posted: Dec 02, 2015  |  Closed  |   11 Proposals
I need a piece of metal or wood cut into the shape of a business card, with a thin rectangle cut into the middle of it. It is a signature guide for the blind or visually impaired. I'm including a picture of the plastic version, but I want it done in steel, aluminum, or wood. I don't have access to any saws, so I need this done by someone else - Industrial Designers or any kind of metal/wood workers welcome. I need this within 1-2 weeks, and I'd be ok with only one if you're doing it by hand. It should be very simple. I would also be ok with this being done in another material, if it looked nice and elegant.
Category: Product Design       

R****dio
 [?]
Sign in to view client's details.
| R****dio
|    United States
Fixed Price: Not Sure   |  Posted: Dec 02, 2015  |  Closed  |   22 Proposals
Looking for an experienced CAD Designer for designing enclosures for fabrication with sheet metal. Will need detailed drawings for prototyping / manufacturing. Sketchup models of enclosure and parts will be provided for reference to make job easier. Would prefer freelancers in China who could work with fabrication shop locally.
Category: Product Design       
Preferred Location: China

****
 [?]
Sign in to view client's details.
| Client
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Dec 01, 2015  |  Closed  |   8 Proposals
A CO2 controller for Rooftop Units- RTUs for commercial buildings. Application will be on single phase, 208 volt RTUs with economizer. All applications will be on 5 ton or smaller RTUs with single phase blowers. I need a CO2 controller that will work along side of the Fanhandler   [obscured]  /index.php/applications/hvac-whisperer The controller needs to measures the return air CO2 concentrations and modulate the outside air damper/economizer's actuator until the CO2 concentrations have come back under the required concentrations. The controller will only need to function during the heating cycle. During the cooling and economizing cycles the CO2 controller will be in the waiting/off mode "Advanced Rooftop Controllers" always incorporate CO2 controls as a part of their systems.   [obscured]  /
Category: Electrical       
Skills: Electronic Design, Digital Electronics       

j****bel
 [?]
Sign in to view client's details.
| j****bel
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Dec 01, 2015  |  Closed  |   31 Proposals
Hello, I am looking for a talented product designer to help me make a biodegradable water bottle design. We are looking at using either an additives based material or PLA material that makes the water bottle biodegrade and marine degrade. The brand of the company is called VENA and it's going to be having atmospheric water. We are looking for a product designer who can help with the following: -bottle design of a 1 liter water bottle with manufacture ready product specs to be sent to manufacturing facility -any partnered manufacturers to set up supply chains -materials selection -Prototype development Please contact me if interested at   [obscured]   John
Category: Product Design       

J****lsh
 [?]
Sign in to view client's details.
| J****lsh
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job