Save this Search
     
Sort by:
  • Posted Date
Fixed Price: $1,000 - $5,000   |  Posted: May 04, 2015  |  Ends: 13d, 6h  |   4 Proposals
I need a Senior Software Developer to assist in the development of a biosensor project. You will work with an Electrical Engineer and a Mechanical Engineer in the development process. Attached, you will find a few beginning specifications for the project.
Category: Product Design       

r****ing
 [?]
Sign in to view client's details.
| r****ing
|    United States
Fixed Price: $500 - $1,000   |  Posted: May 04, 2015  |  Ends: 13d, 4h  |   16 Proposals
I am looking for an firm to assist the in the creation of a prototype for a product in Men's fashion. We have pictures, designs and can detail functions. The product is not fabric/cloth and expect it to consist of a heavy plastic or some other material. Our product is designed to fit in the outside coat pocket to secure your pocket square. I am looking for someone to bring the prototype off the paper into reality. I would be looking at examples of your work or reviews of people you have worked with in the past under similar circumstances. If you are new and have not received many job you are not ruled out, will consider all. Will answer any questions or field any conference calls for further information.
Category: Product Design       

J****712
 [?]
Sign in to view client's details.
| J****712
|    United States
Fixed Price: Less than $500   |  Posted: May 04, 2015  |  Ends: 13d, 3h  |   7 Proposals
READ CAREFULLY. I need a ring manufactured, it needs to be made of stainless steel, and it will be a smaller size ring. It is a very simple design. Basically a round ring with chamfer type features around each edge. Here is a pic of my ring   [obscured]  /fang/chiouperng5/images/ring/ring1.jpg. Needs to be professional quality, no 3d print jobs. I am looking for a physical part to be made not just the 3d model. Thanks .
Category: Mechanical       

I****ers
 [?]
Sign in to view client's details.
| I****ers
|    Canada
Fixed Price: Not Sure   |  Posted: May 04, 2015  |  Ends: 13d, 3h  |   13 Proposals
I need to design an LED that will go into an plastic housing. The requirements for the LED are this: - 1 bulb - powered by a small watch battery - ** LED needs to be able to turn off automatically in 5 minutes - All will need to fit into tube 5/8" dia x 1.25" long - Needs to be cost effective for production (so as simple as possible) Thanks!
Category: Electrical       

d****hbt
 [?]
Sign in to view client's details.
| d****hbt
|    United States
Fixed Price: Less than $500   |  Posted: May 04, 2015  |  Ends: 12d, 20h  |   2 Proposals
I need someone with great design quality...who can create in a timely manner...and has the expertise in crafting these gloves...info will be sent to you if selected
Category: Product Design       

v****ons
 [?]
Sign in to view client's details.
| v****ons
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: May 04, 2015  |  Ends: 12d, 18h  |   6 Proposals
I found most of K-band FMCW radar front-end modules are made with flat antenna. But I need it to be connected to WR-42 waveguide and I'm looking for a solution to fulfill my requirement. I'm looking for someone who can solve this issue.
Category: Electrical       

W****m88
 [?]
Sign in to view client's details.
| W****m88
|    Korea, Republic of
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: May 04, 2015  |  Ends: 12d, 17h  |   5 Proposals
The job is a feasibility study. I need someone with very good experience in FPGA design based projects. Our project would require: _ passively cooled FPGA and board. _ an FPGA able to implement: _______ at least 6 PCI Express 3 controllers or _______ 6 10 gigabit ethernet controllers (1Gbit is also enough) _______ if more even better _ it should have a CPU integrated (preferably ARM) or be able to configure one using a soft core. the cpu could be also as a separate chip on the board. In this case the FPGA must be able to share data with the CPU either via shared memory or other concept. _ the board with the required components should be below 300 dollars if possible in large quantities. We also need some advice on possible ways to update the FPGA configuration. We would prefer to do it without powering down the device.
Category: Product Design       

s****mod
 [?]
Sign in to view client's details.
| s****mod
|    Switzerland
Fixed Price: Not Sure   |  Posted: May 04, 2015  |  Ends: 12d, 16h  |   15 Proposals
Looking for companies/individual who has keen interest or had good design experience for a handphone holder for motorcycle.
Category: Product Design       

b****yeo
 [?]
Sign in to view client's details.
| b****yeo
|    Singapore
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 04, 2015  |  Ends: 57d, 15h  |   16 Proposals
Hi, I am seeking someone who has experience in electrical engineering. The work requirements will be sent. Thank you.
Category: Electrical       

d****zzt
 [?]
Sign in to view client's details.
| d****zzt
|    Israel
Fixed Price: Not Sure   |  Posted: May 03, 2015  |  Ends: 12d, 11h  |   11 Proposals
I am building a house, and need help with electrical service load analysis, electrical wire routing design / circuit design, and part list for job. I have some future items that will need dedicated ciruits for the future Future need dedicated circuit: Port a che ( Covered parking)- 4 lights over the garage -Future bathroom and game room possible central AC unit added to over garage I think a breaker panel in the garage and a panel in the bedroom 4 Closet Trying to get a parts list to figure the cost of material for the job as I have several electricians bidding the job, but some are bidding just labor and I am unable to compare apples to apples. Also I wasnt to make sure the electrician do the right service into the house.
Category: Electrical       

r****005
 [?]
Sign in to view client's details.
| r****005
|    United States
Fixed Price: Less than $500   |  Posted: May 03, 2015  |  Ends: 12d, 11h  |   4 Proposals
Looking for someone to make me a 2.1 channel Class D amplifier board with passcode protected bluetooth. The amplifier has to run on 12v 1a and have approximately 2X25 watt fullrange output and 1X50 watt bass output.
Category: Electrical       

k****015
 [?]
Sign in to view client's details.
| k****015
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 03, 2015  |  Ends: 12d, 10h  |   5 Proposals
Design of a work boot sole that maximizes grip comfort and durability. Specifically aimed at Construction, infrastructure, and roading industries. this project is ideally suited to a designer with experience in the footwear industry.
Category: Product Design       

B****ton
 [?]
Sign in to view client's details.
| B****ton
|    New Zealand
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 03, 2015  |  Ends: 12d, 8h  |   8 Proposals
We are a small but established company providing accessories for photographers. Our current primary product is a range of leather camera straps targeted at stylish photographers that want a more comfortable and better looking camera strap. We would now like to take this theme into our first camera bag. The aim of this bag is to be an everyday bag for photographers that are always on the go. It should suit daily commutes as well as international travel and even adventures into nature to get the perfect image. To achieve this it must be functional but also great looking so that it is used every day. We do not want it to look like a camera bag at all! Here are some of the features this bag will have: Waxes canvas with Leather accented construction Convertible messenger/backpack carrying options with padded straps laptop/ipad sleeve rain/dust resistant internal padding/dividers to hold approx 1 DSLR and 3-5 lenses Fast access to gear Ability to strap a tripod to the bottom of the ba...
Category: Product Design       

l****tin
 [?]
Sign in to view client's details.
| l****tin
|    Australia
Hourly Rate: $20 - $30 / hr   |  Duration: 3-4 weeks  |  Posted: May 03, 2015  |  Ends: 12d, 8h  |   19 Proposals
I need a custom board designed for the Atmel SAMA5D4 that should be relatively straight forward. I would like for the design to be done in Eagle, but that isn't a firm requirement. The board will have these types of components: 1) LCD connector for a 720p display 2) 256 or 512 MB of DDR memory 3) NAND flash (for the boot loader, firmware, etc.) 4) SD Card for the OS, etc. 5) Various regulators and filters 6) A few I2C/SPI/UART sensors 7) One or two debug connectors I have a good idea of what I need and this project needs to be done fairly quickly.
Category: Electrical       

b****ank
 [?]
Sign in to view client's details.
| b****ank
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 03, 2015  |  Ends: 12d, 7h  |   19 Proposals
Looking for a 12V DC motor control for a small 100W motor. Need a CPLD with LCD or LED Display The Display can indicate 2 Digit Count that shows time that allows motor to run for a specified time. Say Display =01 implies 15 seconds Display = 02 implies 30 seconds etc., Need a up count button and down count button to chose the correct value. Components needed : 1. Small 2 digit LED/LCD Display, 2. 100W DC motor, 3.110V to 12V Power Adapter, 4. Up button (can be simple push button) 5. Down button 6. CPLD You can breadboard it and I will get a PCB designed once the system is working. Get back to me for more specific details
Category: Electrical       

s****539
 [?]
Sign in to view client's details.
| s****539
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: May 03, 2015  |  Ends: 23d, 4h  |   6 Proposals
I am using a CFD program CONVERGE to simulate engine operation. The compression chamber has small leak passages, on the order of 1mm^2, from which the compressed gas leaks during the engine cycle. Modeling these leaks is inefficient due to the small mesh size required, and this slows the simulation computing time dramatically. I would like to hire someone who can modify the CFD code using a "User Defined Function" which will uniformly remove mass from the chamber as a function of time, at a prescribed rate, without physically modeling an orifice to the atmosphere. Please contact me for details.
Category: Mechanical       
Skills: Computational Fluid Dynamics (CFD)       

M****son
 [?]
Sign in to view client's details.
| M****son
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 03, 2015  |  Ends: 4d, 2h  |   8 Proposals
I am looking for a technical designer (or fashion designer I'm not sure of the proper term) to help get a product design / tech pack created to begin manufacturing a line of women's maternity athletic shorts. Looking for an experience technical designer and location does not matter. I am US-based (North Carolina) and always available to chat/email/talk during the process. Thanks
Category: Product Design       
Skills: Fashion Design, technical design       

E****cck
 [?]
Sign in to view client's details.
| E****cck
|    United States
Fixed Price: Less than $500   |  Posted: May 03, 2015  |  Ends: 12d, 1h  |   15 Proposals
We need to create a technical design sketch for new 3D printer. Printer's geometry like Makerbot or Ultimaker. Dimensions - resizable. Suggestions for the design: strong and stylish
Category: Product Design       

a****yur
 [?]
Sign in to view client's details.
| a****yur
|    Russia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 03, 2015  |  Ends: 11d, 22h  |   26 Proposals
Working on an industrial design prototype that requires knowledge of basic mechanical movements, solar energy and motor specifications. Open to discussing project rate/ hourly rate ...as well as possible business collaboration for this well received concept with excellent opportunity for mass market appeal and huge profits. Please be willing to sign a Non disclosure agreement.
Category: Mechanical       

j****316
 [?]
Sign in to view client's details.
| j****316
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 03, 2015  |  Ends: 11d, 19h  |   1 Proposal
Taverna a Mediterranean food company based in Europe is looking for a Food Technologist that will come to our factory in Varel in Germany once a month for monthly analysis. We are looking for individuals that are from Varel or from the area.
Category: Product Design       

t****mil
 [?]
Sign in to view client's details.
| t****mil
|    Israel
Fixed Price: Less than $500   |  Posted: May 03, 2015  |  Ends: 11d, 16h  |   2 Proposals
We are a gymnastics club that runs a turn up and play session. We currently use an app called 'sign in' and this asks each customer to sign in their name, mobile and email. It also totals up how many people have signed in - therefore who is on site each day. We can also then download this information as a CSV.. Most importantly for our members this app remembers them! As they hate to constantly type in email and mobile number - especially if they are regulars to our gym. As soon as they put their name in - it remembers all of their information! Unfortunately the app is being updated and the makers have said they cannot carry over old information to the new update! I will have very annoyed customers as I have over 1000 details already stored. Other reasons - being I would like a more personalized sign in app to our gym club - that could potentially add more features along the way etc. Most importantly I need our current information to be able to continue as normal in the new a...
Category: Product Design       
Skills: Electronic Design, Product Design       

s****oad
 [?]
Sign in to view client's details.
| s****oad
|    United Kingdom
Fixed Price: $500 - $1,000   |  Posted: May 03, 2015  |  Ends: 11d, 14h  |   1 Proposal
hello i need a fm transmitter which can send signal to a computer application . for example : if i am 2 km away from my computer and my computer is connected to a fm receiver and i have a fm transmitter through which i can send signals to the fm receiver and my computer will do a predefined action on a particular signal, Like YES on 1 type of signal and NO on other type of signal. we can hire a software developer for software part. the signal must be very fast as need lowest latency in transforming signals... if you can suggest any other device which is very small we can also use that like RF control. we can also use DTMF tones on phones ( but i have checked earlier there is a delay in DTMF tones). our main aim is to send some signals to our computer application which will react on out sent signals...... thanks
Category: Product Design       
Skills: Electrical Engineering, Electronics       

g****993
 [?]
Sign in to view client's details.
| g****993
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 03, 2015  |  Ends: 11d, 13h  |   4 Proposals
Hello, We are developing a Embedded system and we have to do Video broadcasting over WiFi and GPRS. If anyone have Expertise in either Hardware Part or Software Part , Pl contact Asap. Thanks & Regards : Amit Malviya
Category: Product Design       
Skills: Electronics, PCB Design, Wi-Fi, Bluetooth       

s****ics
 [?]
Sign in to view client's details.
| s****ics
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 02, 2015  |  Ends: 11d, 7h  |   13 Proposals
Design or source and assist in manufacturing a MR16 LED driver that is capable of powering a 10 watt LED from major manufacturers including Phillips, Sorra, and TCP. Driver MUST be dimmable down to 5% (preferably 1%) with either forward or reverse phase (leading edge or trailing edge) triac dimming, preferably both. High efficiency electronic driver is preferred. Project phases include design or sourcing of driver and housing, building driver and housing prototype, testing, and assist in manufacturing. Final driver must be ETL of UL certified.
Category: Electrical       

j****738
 [?]
Sign in to view client's details.
| j****738
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job