Save this Search
     
Sort by:
  • Posted Date
Fixed Price: $220 - $350   |  Posted: 52 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
- Two 7.5 tons of Rooftop HVAC Units mounted either side - AHRI Standard 340/360; ASHRAE 90.1; packaged unit; Economizer and it's control; - Roof is of Metal, hence subsequent supporting structure needs to be designed. - Adjustable Pitch curb will be preferred as roof is sliding. Please find the attached dwg file for reference and to be worked upon. Project to be completed on or before 7th July 15.
Category: Mechanical       

k****gar
 [?]
Sign in to view client's details.
| k****gar
|    United States
Fixed Price: Less than $500   |  Posted: 1h, 5m ago  |  Ends: 1d, 22h  |   2 Proposals
I have a layout that I need turned from single line to double line. I have started in (bottom left corner). I need all the layers and colours to be the same. You may need to slightly adjust the layouts to fit correct bends. I need someone with HVAC design to look at this so that units and ducting is workable. I need this done in AutoCAD no 3D packages. I have the AutoCAD file and will give to winning bid
Category: Mechanical       

B****ork
 [?]
Sign in to view client's details.
| B****ork
Fixed Price: More than $10,000   |  Posted: 1h, 59m ago  |  Ends: 14d, 22h  |   2 Proposals
Dear Sir/ Ma'am, I am the operations and technical advisor for a company that provides car washing services to residents of condominiums in Singapore at the convenience of their car parks. We are currently in the 'overhaul' phase where we are changing various aspects of our company and this includes increasing the efficiency and quality of our car washing. I will state the current status and what we hope to achieve with your company's service below. Current Situation 1) Car Washer enters the premises of the car park and fills up 2 buckets of water (1)For clean water 2) rinsing off dirty cloth). We are currently using a traditional 2 bucket washing system,   [obscured]  /?page_id=15 . Please view link to read more on 2 bucket washing. 2) Loads the 2 buckets on an industrial trolley and pushes them around the car park searching for cars that has been registered for our car washing service and washes the exterior of the vehicle. Problem 1) Possible spillage of water f...
Category: Product Design       

e****anm
 [?]
Sign in to view client's details.
| e****anm
|    Singapore
Fixed Price: Not Sure   |  Posted: 2h, 9m ago  |  Ends: 14d, 21h  |   7 Proposals
We have 2 products to be drawn in solidworks. We are looking for a talented designer who is great with solidworks, has great communication and is creative. Our full-time designer will be on skype and phone to help guide you thru the project if required. Tight deadlines so only apply if your available and interested. Ongoing projects available for right applicant. Product 1: Chicken Carry Case made from cardboard that our customer can cut out easily and put together so when they buy there pet chickens, they have something to use when picking up thier new pets. Product 2: A new designed cat enclousure made from our already designed aluminium extrusion profiles.
Category: Product Design       

t****gak
 [?]
Sign in to view client's details.
| t****gak
|    Australia
Fixed Price: $500 - $1,000   |  Posted: 6h, 43m ago  |  Ends: 14d, 17h  |   17 Proposals
We at Design Factory working for New Product Design and Development, now a days due to increased work load we have two openings for design engineers, please have a look on skills which we are looking for : A). Industrial Designer : - Concept Sketches - 3D Modeling (Solid Works) - High Quality Render - Experience with Prototypes (3D Printing) - Knowledge of Manufacturing Process (Preferred) - Able to work on our projects minimum 20 Hours/ week B). Mechanical Design Engineer : - 3D Modeling - 2D Drawings - High Quality Render - Experience with Prototyping - Have to knowledge of Manufacturing Process (Injection Moulding and Casting) - Able to work on minimum 20 Hours/ week Additional Skills Would be Good : - CAD Animation Video Payment : We are happy to pay as per projects, and this will be ongoing work for right selected design engineers. Looking forward for your portfolio.
Category: Product Design       

d****ory
 [?]
Sign in to view client's details.
| d****ory
|    India
Fixed Price: $100 - $200   |  Posted: 7h, 33m ago  |  Ends: 14d, 16h  |   2 Proposals
I am looking to start a small Linear Electric Actuator factory in Bay Area(San Francisco). I need a consultant to guide me through the process of setting up factory with proper machines, getting permit/license, etc. People with Mechanical Engineering background or who worked in a Linear Actuator factory will be good. Here are the details that I need from the qualified candidate to start with 1. 3 Linear actuators that has better demand. 2. Machines to buy and their cost and how many units can they make in a month. 3. Number of persons to hire and their skill sets and their responsibilities. etc.
Category: Mechanical       

s****nbu
 [?]
Sign in to view client's details.
| s****nbu
|    United States
Fixed Price: Less than $500   |  Posted: 8h, 30m ago  |  Ends: 14d, 15h  |   4 Proposals
Hello, I'm looking for an engineer to make a plan for a mini homemade fridge that can be made quickly and contain at least 3 coke cans with providing a list of components and wiring plan.
Category: Product Design       
Skills: Industrial Design, Manufacturing Design       

R****n78
 [?]
Sign in to view client's details.
| R****n78
|    United Arab Emirates
Hourly Rate: $40 - $50 / hr   |  Duration: Not Sure  |  Posted: 8h, 51m ago  |  Ends: 6d, 15h  |   16 Proposals
Wanted organized detail oriented Solidworks injection molded parts expert Hello, I am working on a new Solidworks project and I need to make some adjustment to already existing files. I am looking for someone who is super positive and has a can do attitude. You need to be super familiar with Solidworks and designing plastic injection molded parts for manufacturing. You must be able to work in fast paced environment. You must have experience with creating gasket over molds. You must be very familiar with the plastic injection molding process. Have some knowledge in creating bump-offs, living hinges and creating mirror image parts. You must be willing to meet in person in Tucson and be available ASAP. The main components of the work will be: creating a living hinge editing existing plastic hinges designing new parts Please send me an email and include the following: Previous projects you have created What the responsibilities were Who your boss was Along with what each...
Category: Product Design       

A****as1
 [?]
Sign in to view client's details.
| A****as1
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 10h, 23m ago  |  Ends: 14d, 13h  |   6 Proposals
I have a idea for a bluetooth mechanical keyboard. I am in need of an electrical engineer or someone to build a concept product and design the PCB and internals. Prototyping is also preferred. Further details will be discussed upon completion.
Category: Product Design       

C****sus
 [?]
Sign in to view client's details.
| C****sus *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 10h, 46m ago  |  Ends: 14d, 13h  |   0 Proposals
In search of a designer and manufacture to design pots and pans. Person will need to be familiar with magnetic energy. I don't have an abundance of money to spend just a idea and a dream.
Category: Product Design       

c****myn
 [?]
Sign in to view client's details.
| c****myn *
Fixed Price: $500 - $1,000   |  Posted: 13h, 21m ago  |  Ends: 14d, 10h  |   4 Proposals
I am looking for a designer, material sourcing, prototyping, and manufacturing freelancer(s) to develop a product that clips to the achilles tendon on the ankle. I have prototyped a certain clip that attached to the Achilles' tendon that drastically improves speed and mobility. Image 4) It doesn't work as well as I want, and I know why. Here is a spring clamp I used, and softened the tips with adhesive carpet rounds: (Image 1) This works better than other clamps, but is too strong to the state where the pressure is slightly painful. However, if this pressure can be adjusted, it would be perfect. The clamps must be positioned around this area with the dimples of the Achilles: (Image 2) What's interesting is that vibration adds a whole level of stimulation that can improve performance. When combining the features of adjustable clamps, skin friendly pressure, and vibrations, we get a heavy duty glorified: (Image 3) ...vibrating nipple clamps. That's right, a toy intended for s...
Category: Product Design       

R****att
 [?]
Sign in to view client's details.
| R****att
Fixed Price: $500 - $1,000   |  Posted: 13h, 24m ago  |  Ends: 14d, 10h  |   0 Proposals
I am looking for a designer, material sourcing, prototyping, and manufacturing freelancer(s) to develop a product that clips to the achilles tendon on the ankle. I have prototyped a certain clip that attached to the Achilles' tendon that drastically improves speed and mobility. Image 4) It doesn't work as well as I want, and I know why. Here is a spring clamp I used, and softened the tips with adhesive carpet rounds: (Image 1) This works better than other clamps, but is too strong to the state where the pressure is slightly painful. However, if this pressure can be adjusted, it would be perfect. The clamps must be positioned around this area with the dimples of the Achilles: (Image 2) What's interesting is that vibration adds a whole level of stimulation that can improve performance. When combining the features of adjustable clamps, skin friendly pressure, and vibrations, we get a heavy duty glorified: (Image 3) ...vibrating nipple clamps. That's right, a toy intended for s...
Category: Product Design       

R****att
 [?]
Sign in to view client's details.
| R****att
Fixed Price: Not Sure   |  Posted: 14h, 12m ago  |  Ends: 14d, 9h  |   3 Proposals
Greetings Vinnie- I've been designing an eyewear line over the last few years and reached the prototyping stage. The engineer I use is located in China and limited when it comes to adding the finishing touches to my designs. Obviously, there are communication challenges at times. I would like to discuss with you possibly helping me finalize my designs so that I can finalize the prototypes and thereafter phase into manufacturing. I've designed 5 types and all of my original files. - Michael
Category: Product Design       

m****jr3
 [?]
Sign in to view client's details.
| m****jr3
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 16h, 25m ago  |  Ends: 14d, 7h  |   12 Proposals
We would like to get feedback and review on the mechanical design of a sensor for usability, assembly and manufacturability. We also want to do some FEA analysis of the design.
Category: Mechanical       

a****heb
 [?]
Sign in to view client's details.
| a****heb
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 18h, 39m ago  |  Ends: 14d, 5h  |   1 Proposal
With your assistance we can keep everyone elated in the bedroom. My design is quite simple. I'm in search of someone that won't "break the bank" or perhaps a partnership.
Category: Product Design       

c****myn
 [?]
Sign in to view client's details.
| c****myn *
Hourly Rate: More than $50 / hr   |  Duration: 3-4 weeks  |  Posted: 19h, 20m ago  |  Ends: 14d, 4h  |   32 Proposals
I Have developed a new product that is sort of like a skateboard and I need someone to create complete 3D drawings of it. It's a bit more complicated than just a skateboard. I have most of the design concepts completed and just need to work with a talented expert to create all 3D renderings and finalize some of the concepts. The goal of this is to take the 3D drawings to manufacturers to determine the production cost of the product and take it to market. I live in Newport Beach and am looking for someone local, Please let me know if you are interested. Thank You Phil
Category: Product Design       

C****rds
 [?]
Sign in to view client's details.
| C****rds
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: 23h, 16m ago  |  Ends: 14d, 0h  |   2 Proposals
Hi, I'm looking for a designer or engineer to design the most stylish and functional weightlifting glove. It must have the following things as well: 1) more material under fingers at the calluses (Google weightlifting calluses for more) 2) have 2 or 3 finger holes 3) minimal material on the back of the hand 4) designed to avoid bunching when curling the hand 5) attached to a wrist strap If you need more information or more clarification please let me know.
Category: Product Design       

N****t12
 [?]
Sign in to view client's details.
| N****t12
|    Canada
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Jul 01, 2015  |  Ends: 13d, 22h  |   18 Proposals
We are a small company based in London making wooden prescription glasses, and we need some help with solid works and solid cam for CNC production. We make our glasses from wood veneers in a single continuous piece (photo attached) If you think you can help please get in touch Must speak good English or Hungarian
Category: Product Design       

A****ria
 [?]
Sign in to view client's details.
| A****ria
|    United Kingdom
Fixed Price: Less than $500   |  Posted: Jun 30, 2015  |  Closed  |   7 Proposals
Hello, The project is modifying and adapting a reduction gearbox to our prototype device in the medical field. It is a standalone gearbox of about 12mm overall dimension, yet without the DC motor. The gear ratio is estimated at 10:1 and we would need both input and output shafts. Also, ideally both input and output shaft will originate from the center of the gearbox or close to it. Note: these are common gearbox with typical size of 12 x 10 x 9-12.5 mm similar to this:   [obscured]  /product-detail/gearbox-dc-motor-12mm-electric-door_1644023247.html Are you interested?
Category: Mechanical       

****
 [?]
Sign in to view client's details.
| Client
|    United States
Fixed Price: Less than $500   |  Posted: Jun 30, 2015  |  Ends: 13d, 8h  |   3 Proposals
I already have a finalized tech pack of a very specific shirt design and I need to now produce samples using different variations of fabrics until I arrive at the ideal product. This is a shirt for adventure. Fabrics used will be nylon & spandex blended together (92% nylon / 8% spandex) and I will use micro nylon rip stop for the yoke of the shirt. Cargo and zippered pockets are an essential part of the design. There is a vented mesh on the back pleat of the shirt. While the aesthetics of the shirt are vital, the most essential part is the technical elements of the shirt. The pockets and the quality of sewing are of upmost importance. This is designed for the outdoors, not to make a fashion statement. Please only contact me if you have experience with active wear and sowing with nylon fabrics. Thanks and look forward to finding the right candidate for this job.
Category: Product Design       

w****isz
 [?]
Sign in to view client's details.
| w****isz
|    United States
Fixed Price: Less than $500   |  Posted: Jun 30, 2015  |  Ends: 13d, 3h  |   11 Proposals
Hello, I'm looking to create an electronic TV Box from scratch and require help with anyone in the industry to assist with building the BOM and Gerber files for the build so I can provide to a PCB manufacturer in China. Brief high level list of component are below: Amlogic S802 - Quad Core A9 CPU Amlogic S802 - Mali-450 Octocore GPU Broadcom 5G Wi-Fi chipset Memory: 4GB DDR3 Storage: 16GB Flash Storage Wifi: Broadcom 5G 802.11 Dual Band Ethernet Port: 10/100/1000 Full Duplex Port USB: 4.0 Low Power, full speed Bluetooth - Bluetooth V4.0 Mouse/ Keyboard Support Card reader: SD/SDHC/MMC cards OS: Linux or Android Front Display: Time/Clock, Power Button LED - Red - ON / Blue - Off, Wifi/Ethernet LED All work required to produce the board in a functional manner is needed from this job. Thank you, Dan
Category: Product Design       

d****dzc
 [?]
Sign in to view client's details.
| d****dzc
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 30, 2015  |  Ends: 13d, 1h  |   0 Proposals
We wish to have a thermal test done on our new lighting collection "Crisp". Here are the parameters: Test range of ambient temperatures -Warm (20-45 C / 68-113 F) -At 5 C increments Material and Product specs included in Package - Light engine spec sheet, , assembly materials) - thermal paste Test with Gypsum Drywall & Junction Box in worst condition (upside down already positioned in SolidWorks Assembly-Materials have been assigned to part files - Use "CP-CFM Crisp with mount thermal rO" for testing) Deliverables -Cut away section views of complete assembly w thermal shading at each 5C increment -Specific point temperatures indicated at IC, LED, and hottest point on assembly Assumptions -Typical convective air flow (no wind etc) Timelines - Testing completed for Firday July 3, 2015 - Monday July 6,2015
Category: Mechanical       

T****RBW
 [?]
Sign in to view client's details.
| T****RBW
|    United States
Fixed Price: Less than $500   |  Posted: Jun 30, 2015  |  Ends: 13d, 1h  |   13 Proposals
I need help with the Heat Transfer and i need experts that understand the book that is attached here. The detailed work will be provided, please let me know your email address. Thanks
Category: Mechanical       
Skills: Mechanical Engineering       

d****705
 [?]
Sign in to view client's details.
| d****705
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job