Save this Search
     
Sort by:
  • Posted Date
Other - Engineering & Manufacturing
Fixed Price: $500 - $1,000   |  Posted: 2h, 8m ago  |  Ends: 14d, 21h  |   2 Proposals
There are 6 components we need to have calculations for. Each component should have the following information, if applicable: a) Deflection: Dx, Dy, Dz of a "spring" action b) Deflection and rotation: Dx, Dy, Dz, qx, qy, qz, due to Torsion c) Uniform load scenario of 100psf (Refer to Table 4.1 in "Live Loads" of ASCE 7-10) d) Point load of 300lb (Refer to Table 4.1 in "Live Loads" of ASCE 7-10) e) Seismic Load (Refer to Section 13 of ASCE-7-10. "Seismic Design Requirements for Non-structural Components") f) Glass self weight and guard load forces should also be included in the point load, where applicable. The 6 components that need to be checked: 1) HSS Stringer 2) Steel Plate of tread (assume the load is taken all by the steel) 3) Eccentrically loaded tread 4) Reactions at top and bottom connections (need shear and tension) 5) The landing reactions from the steel HSS fra...
Category: Other - Engineering &...       
Skills: Structural Analysis       

A****air
 [?]
Sign in to view client's details.
| A****air
|    Canada
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: 4h, 7m ago  |  Ends: 59d, 20h  |   0 Proposals
Must work in Surrey, B.C. (Cloverdale area). Must be proficient with an oscilloscope. Analyze and understand the signals of fuel injectors and various sensors in a car engine that's operating at different RPM ranges. Then develop a fully programmable device that can intercept and manipulatesaid signals to alter engine performance/economy. The device must be capable of supporting 3 cylinder (3 injector) to 10 cylinder (10 injector) engines, meaning that while we willcreate a different plug 'n play harnessfor each engine, the device (that you will help develop)can be programmed to work with any engine. For instance, if the device will be connected to a V10 engine, then we will upload a V10 program into it.The device should also have logging capability, meaning we can download signals via USB to a laptop. If you think another engineer (or outside contracting) is needed to assist this product development, then please let us know. If possible, show us the projects that you have ac...
Category: Other - Engineering &...       
Preferred Location: Canada

q****omm
 [?]
Sign in to view client's details.
| q****omm
|    Canada
Fixed Price: $500 - $1,000   |  Posted: 9h, 25m ago  |  Ends: 14d, 14h  |   1 Proposal
I am working on a software that required designing and building a new scanner different from the conventional one. Anyone with expertise in Electronics and Java integration would be welcome. Communications and Promptness is very important to me. If you do not have these please do not respond
Category: Other - Engineering &...       

S****abs
 [?]
Sign in to view client's details.
| S****abs
|    Belgium
Fixed Price: $500 - $1,500   |  Posted: 9h, 59m ago  |  Ends: 14d, 14h  |   2 Proposals
Hello, Need design schematics with proper rf shielding, interference protection circuitry for 865-867 Band with 200 KHz spread. Module should have a processor and ample memory. Lorawan (  [obscured]  /labs/zurich/ics/lrsc/lmic.html) needs to be emdedded in it. Provision for connecting to RS232 + RS485 Interface You can use sample desgin which are provided by semtech as starting point (  [obscured]  /product-search/en?vendor=0&keywords=SX1276MB1MAS) Power Requirements The offered hardwares should capable of operating on three phase supply drawn from the meter input itself. Auxiliary power supply will not be acceptable. The hardware shall have three phase AC input supply and should be capable of proper functioning within the power supply range of 77 AC P-P to 470V AC P-P, 50 Hz hardware should also be capable of operating on single phase 230V, 50 Hz power supply. The hardware shall be suitably protected against surges. Average Power consumption of th...
Category: Product Design       
Skills: Electronics, RF Design       

S****Vai
 [?]
Sign in to view client's details.
| S****Vai
|    India
Fixed Price: About $20   |  Posted: 12h, 50m ago  |  Ends: 14d, 11h  |   1 Proposal
This is only scoping and quotation request - Also Send proof of work First, I would like you to assess the information that I have and indicate what you will need in order to perform a feasibility report that could also to be used to attract investors. Second, Also what you can provide in order to get this done. Last how much it will cost for you to do this. The attachment are just background info, I do have coordinates, also irradiation levels, temperature, wind, precipitation etc. Grid information
Category: Other - Engineering &...       
Skills: Manufacturing Design, Electronics       

r****ant
 [?]
Sign in to view client's details.
| r****ant
|    South Africa
Fixed Price: Less than $500   |  Posted: 13h, 35m ago  |  Ends: 14d, 10h  |   2 Proposals
Looking to get a invention put onto paper with full drawings for construction. egg shape structure which is a bed which can close electronics will be placed inside. will give further infomation on acseptance
Category: Product Design       

b****o_7
 [?]
Sign in to view client's details.
| b****o_7
|    South Africa
Fixed Price: About $20   |  Posted: 22h, 45m ago  |  Ends: 14d, 1h  |   3 Proposals
This is only scoping and quotation request - Also Send proof of work First, I would like you to assess the information that I have and indicate what you will need in order to perform a feasibility report that could also to be used to attract investors. Second, Also what you can provide in order to get this done. Last how much it will cost for you to do this. The attachment are just background info, I do have coordinates, also irradiation levels, temperature, wind, precipitation etc. Grid information
Category: Other - Engineering &...       
Skills: Manufacturing Design, Electronics       

r****ant
 [?]
Sign in to view client's details.
| r****ant
|    South Africa
Fixed Price: Less than $500   |  Posted: Sep 04, 2015  |  Ends: 1d, 23h  |   3 Proposals
We are looking for a mathematician or an engineer who would able to solve the following optimization problem. - The wood manufacturing business has X machines. Each of the machines is operated to process wood material during working hours. The number of working hours for each day of production should be an adjustable variable which can be changed by the user. - Every day the management of the business receive a list of jobs that need to be done during the next couple weeks (see attached); - Each job has a corresponding deadline that needs to be met; - Each job consists of X number of processes which correspond to each of the machines. Each process in a job needs to be completely finished before the next one can begin i.e. needs to run in order of Process 1 to Process X; - For each of the processes, there is a certain run time that is provided within the input data; - There should be an interval of 15 minutes between each job for any given machine. The goal is the find the most optima...
Category: Other - Engineering &...       

t****ost
 [?]
Sign in to view client's details.
| t****ost
|    Australia
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: Sep 03, 2015  |  Ends: 13d, 19h  |   27 Proposals
Embedded hardware engineering support needed to assist with design iteration. Work includes schematic, layout and hardware bring-up.
Category: Product Design       

s****obs
 [?]
Sign in to view client's details.
| s****obs
|    United States
Fixed Price: Not Sure   |  Posted: Sep 03, 2015  |  Ends: 13d, 12h  |   4 Proposals
process plant safety please see the attachment and solve the question as describe and complete the complete requirnment as given in the attached file
Category: Other - Engineering &...       

z****786
 [?]
Sign in to view client's details.
| z****786
|    United Arab Emirates
Fixed Price: Not Sure   |  Posted: Sep 03, 2015  |  Ends: 13d, 11h  |   3 Proposals
we want to bulid a matlab program that connect CC2540 device and read sensor data from it using Bluetooth then do actions deped on the data that sended by the device
Category: Other - Engineering &...       

a****992
 [?]
Sign in to view client's details.
| a****992 *
|    Jordan
Fixed Price: Less than $500   |  Posted: Sep 03, 2015  |  Ends: 13d, 8h  |   6 Proposals
answer any two questions in options in attachment,5000 words, 2500 for each question with deadline 20th september
Category: Other - Engineering &...       

b****er9
 [?]
Sign in to view client's details.
| b****er9
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Sep 02, 2015  |  Ends: 12d, 19h  |   6 Proposals
I need a complete camera case design that meets standard carry-on requirements of all airlines. General specs for carry on are 22x14x9 inches and 15#. This bag needs to safely and securely house a dji phantom 3 (including controller, charger and 2 batteries), a canon rebel t3i with a 17-40 mm lens, an 8-15 mm lens, a gopro camera and some accessories such as cables, gorillapod, feiyu wearable gimbal and battery charger. Drones are usually housed in dense foam and camera gear is usually housed in padded compartments but I cannot find a design that will house both with required specs. Example of drone storage:   [obscured]  /HPRC-HPRC2700WPHA3FO-Custom-Phantom-Black/dp/B00ZL3F2UY/ref=sr_1_1?ie=UTF8&qid=1441242471&sr=8-1&keywords=phantom+3+foam&pebp=1441242470657&perid=1HW0BBTQNFNBSJFA2MNG Example of camera storage;   [obscured]  /products/shootout-backpack-le-small-black.aspx Prefer ability to switch out camera gear as necessary; so prefer hou...
Category: Product Design       

r****a15
 [?]
Sign in to view client's details.
| r****a15
|    United States
Fixed Price: Not Sure   |  Posted: Sep 02, 2015  |  Ends: 12d, 13h  |   23 Proposals
I have an idea for a product, but can't seem to come up with the right design. I need the help of an expert to help complete the design. I will attach a list of what the product will have.
Category: Product Design       

t****093
 [?]
Sign in to view client's details.
| t****093 *
|    United States
Fixed Price: Less than $500   |  Posted: Sep 02, 2015  |  Ends: 11d, 22h  |   7 Proposals
I am looking for a manufacturer that can provide me with prototypes of an iPad case/strap made out of rubber/silicone. I have 3 professionally made 3d images bad on my design to provide you with. I can give approximate sizes but without knowing how soft or flexible the rubber/silicone material is i will need to rely on the manufacturers knowledge and help with their materials. Initially i would only be looking for 3 prototypes for the Kindle or iPad mini designs. Please contact me with an approximate price, time frame and any information you feel may be useful relating to the process.
Category: Product Design       
Skills: Manufacturing       

w****dia
 [?]
Sign in to view client's details.
| w****dia
|    Australia
Fixed Price: Less than $500   |  Posted: Sep 01, 2015  |  Ends: 11d, 17h  |   16 Proposals
We need a Rc Plane designed. The plane needs to be very similar to this one   [obscured]  /hobbyking/store/__27132__Skywalker_X_8_FPV_UAV_Flying_Wing_2120mm_.html We need CNC DFX vector files as part of the design. Further details will be shared on contact.
Category: Product Design       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    Canada
Fixed Price: Not Sure   |  Posted: Sep 01, 2015  |  Ends: 11d, 17h  |   10 Proposals
Here is problem we are trying to solve... Issue We have multiple Medical Bluetooth devices that can interacts either on Browser directly or Android/iOS App Some cases user won't have any PC or Mobile device... Looking for Hardware solution Provide a off-the-shelf embedded system with Bluetooth 4.0/BLT 3G/4G wireless connectivity, some memory to run the application, there is no screen or user interface required... after configuration is done.. Our programming team will configure Android/Win App that will always look data from Bluetooth source... Good to have USB 2.0 support to connect external camera Device will be continuously running with power backup (in case power goes out or so) Android or Raspberry PI related configuration....... easy to buy in USA (but able to ship internationally) Product pricing Max $80 + pay monthly carrier fee for data plan I am just looking for commercially available product .. No software to design no custom hardware to design Product should...
Category: Other - Engineering &...       
Skills: Raspberry Pi, Android PC, Micro PC       

p****pro
 [?]
Sign in to view client's details.
| p****pro
|    United States
Fixed Price: About $1,500   |  Posted: Sep 01, 2015  |  Ends: 11d, 17h  |   7 Proposals
We need a Laser range finder design and produced. Requirments: 1) Portable 2) Range of 10km 3) Accuracy of +- 10m at 10km Further details will be discussed
Category: Product Design       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    Canada
Fixed Price: Not Sure   |  Posted: Sep 01, 2015  |  Ends: 11d, 13h  |   9 Proposals
I am the Contractor on a 3,000sf Single Family Home. I am looking for someone to put together material list for building materials listed below: Framing interior - lumber (metal studs) etc Drywall & finishing - drywall, green board, cement board, corner bead, tape etc Baseboards (lf) Exterior Compound for Stucco etc Fascia board Of coarse I need it asap. Thank you Thelma Petas
Category: Other - Engineering &...       

a****535
 [?]
Sign in to view client's details.
| a****535
|    United States
Fixed Price: Not Sure   |  Posted: Sep 01, 2015  |  Ends: 26d, 11h  |   6 Proposals
I need a device created that will do the following things: - will be mounted inside of a metal box (like container) - will need to be able to read tags that are stuck on metal - reading range +-2,5m - special tags will be programmed so the device will react differently based on what tag has been read - the tags should be as cheap as possible - EUROPEAN Frequency ranges only The deliverables should be: - the device itself in working order Further details will be discussed later
Category: Product Design       

a****ldi
 [?]
Sign in to view client's details.
| a****ldi
|    Belgium
Fixed Price: $500 - $1,000   |  Posted: Sep 01, 2015  |  Ends: 10d, 23h  |   9 Proposals
Hi I need someone who is in the area of XFEM, I need some work to be done. if anyone interested i will give more details. Thanks
Category: Other - Engineering &...       

A****ker
 [?]
Sign in to view client's details.
| A****ker
|    Australia
Hourly Rate: Not Sure   |  Duration: 7-9 months  |  Posted: Aug 31, 2015  |  Ends: 10d, 18h  |   14 Proposals
We're a small production home builder in Oklahoma looking for someone to do pretty comprehensive take-offs for us. We'd prefer they use planswift so we can integrate it to our PO software. We have in-house architecture that uses Revit for design. This is a partial list of what we need estimated: Framing and cornice package, windows, exterior doors, roofing, sheetrock, brick, doors and trim, hardware, flooring, counter-tops. Thanks, Lance
Category: Other - Engineering &...       

l****del
 [?]
Sign in to view client's details.
| l****del
|    United States
Fixed Price: More than $10,000   |  Posted: Aug 31, 2015  |  Ends: 10d, 14h  |   12 Proposals
We are looking for a talented group or company to partner with in creating this ATM machine. Top level have to features: 1) It needs to provide all the standard functionality of a normal ATM 2) Gaming feature will be focused around casino games 3) Win points to access your money at no fee For the hardware we are looking for the CD and DD design work and documents. All software development necessary for the machine and features. We are in the early stage of features and are looking for an experienced people to partner with an finish putting it all together. We understand that your bids are not final. So take the features above and give us some high end bids that can accommodate them. We need to see rough pricing and time estimates to gage which companies have experience so please be thorough.
Category: Product Design       

a****pps
 [?]
Sign in to view client's details.
| a****pps
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job