Save this Search
     
Sort by:
  • Posted Date
Fixed Price: Not Sure   |  Posted: May 18, 2015  |  Ends: 7d, 19h  |   11 Proposals
We need a device consisting of a microcontroller (such as Arduino) that will constantly monitor a voltage in the range of 0 to 3.3 V. When a voltage change is noticed, the microcontroller will wait until the voltage has stabilized to < 1% variation for at least 250 ms, and then send an RS-232 command at a baud rate of 115200 bit/sec. The command is in the form "P=Y.YYY" where Y.YYY is a number format with a value that ranges from 0.000 at an input voltage of 0V to 1.000 at an input voltage of 3.3 V, with a linear interpolation in between. The form factor is less than 7x7x2 cm. Input power is 24V provided through a BNC connector. It is preferable to use the RS-232D standard, with an RJ45 jack. The unit must start up and start functioning automatically when 24V power is applied. It would be good if we have the ability to reprogram the device simply on site in case we need to adjust some parameters. Supplier is responsible for procuring and assembling all parts, and...
Category: Other - Engineering &...       
Preferred Location: United States

C****100
 [?]
Sign in to view client's details.
| C****100
|    United States
Fixed Price: $500 - $1,000   |  Posted: May 18, 2015  |  Closed  |   2 Proposals
Please provide me with a cost to develop source code (VB.NET) to solve the following problem (refer to the attached image): 1) I want to detect existence of Rhombus shapes in image with a length exceeding a certain length in pixels (4 in attached image). 2) Read the text inside the Rhombus. Input: 1) Image file or Byte Array 2) Rhombus length range in pixels 3) Processing Timeout Output: 1) Each Rhombus bounding box. 2) Number at lower tip of Rhombus 3) Number at center of Rhombus (if any) 4) Rhombus major color (Red, yellow, green etc) Thanks,
Category: Product Design       
Skills: 2123, OCR       

j****ico
 [?]
Sign in to view client's details.
| j****ico
|    United Kingdom
Fixed Price: Less than $500   |  Posted: May 18, 2015  |  Closed  |   3 Proposals
Design New flexible Ear muff/ warmers with some extensions to ear muffs/warmers. This design has to be sleek and should have ergonomic and fashionable design to use in winter cold.
Category: Product Design       

t****abs
 [?]
Sign in to view client's details.
| t****abs
|    United States
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: May 18, 2015  |  Ends: 7d, 17h  |   6 Proposals
We are a small startup and we have prototypes of a patent pending product. You will be programming with the RTOS ThreadX. This project will be focus on two parts: a bootloader that is loaded from EEPROM that verifies the firmware in SPI Flash (code signing) AND the main firmware that performs RAID across two microSD cards and provides functionality for separate read-only and read-write functionality via a high-speed differential switch and signal redrivers. The main CPU is an ARM926 from Cypress. The CPU manufacturer provides example code for both parts of the project. We will be building from scratch or incorporating a preexisting anti-virus package that will scan data as it is being written or after it is written to the microSD storage. We have a few prototypes that we would like to send to the selected programmer in order to program via J-link over JTAG. We are currently having some troubles with this portion of the project.
Category: Other - Engineering &...       
Preferred Location: North America, Western Europe, Australia/Oceania

d****yco
 [?]
Sign in to view client's details.
| d****yco
|    United States
Fixed Price: $750 or less   |  Posted: May 18, 2015  |  Ends: 7d, 16h  |   1 Proposal
We're currently collecting resources for a potential new project. We need someone who is comfortable with neoprene and sewing up concepts from sketches and vector patterns. We want someone who can understand the needs of the project and offer insights to improve product. Once we get moving, the goal is produce 1-2 prototypes a month that can be used for testing. The best intersections of value and quality will be contacted. We would love to see past projects and how you might be able to jump in to help us.
Category: Product Design       
Preferred Location: United States

b****ugh
 [?]
Sign in to view client's details.
| b****ugh
|    United States
Fixed Price: Less than $500   |  Posted: May 18, 2015  |  Ends: 7d, 16h  |   24 Proposals
I am looking to get a professional design of some exercise equipment I'm trying to build similar to a door frame pull-up bar. This project will require 3D design experience, force diagrams, experience in different materials (likely to be some sort of steel but I'm open to other suggestions) and some creativity for improvement on design and minimizing cost of production. Once a free-lancer is selected, I will share my current drawings/ideas (though I expect you will have improvements from a technical standpoint) and notes on this for your improvement and modeling.
Category: Product Design       

j****rin
 [?]
Sign in to view client's details.
| j****rin
|    United Arab Emirates
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: May 18, 2015  |  Closed  |   5 Proposals
The products are a specialized dog collar with a companion bracelet. The collar will come in three sizes: small, medium and large; for small dogs, medium sized dogs and large dogs. I think if we make the bracelet adjustable we only need it in one size.
Category: Product Design       

r****n09
 [?]
Sign in to view client's details.
| r****n09
|    United States
Fixed Price: Less than $500   |  Posted: May 18, 2015  |  Ends: 7d, 13h  |   4 Proposals
This is a job is opened specific to a Freelancer, SHOYEB, and is opened to complete payment from previous work.
Category: Other - Engineering &...       
Skills: 3D Modeling, ANSYS       

b****ras
 [?]
Sign in to view client's details.
| b****ras
|    Turkey
Fixed Price: Less than $500   |  Posted: May 18, 2015  |  Closed  |   0 Proposals
This is a job is opened specific to a Freelancer, SHOYEB, and is opened to complete payment from previous work.
Category: Other - Engineering &...       
Skills: 3D Modeling, ANSYS       

b****ras
 [?]
Sign in to view client's details.
| b****ras
|    Turkey
Fixed Price: Not Sure   |  Posted: May 18, 2015  |  Ends: 7d, 11h  |   8 Proposals
Polycomp Pty Ltd is a manufacturer & Developer of various LED Displays -   [obscured]   Polycomp is currently looking for a software development engineer to develop an program for them as per the following specs. To read information from an excel document and send it down to Polycomp Display using the following options. - Serial communication RS232, RS485, TCP/IP, Wifi, 3G (Relevant Interface available at Polycomp) - Add development on similar bases are also required Polycomp is looking for a suitable candidate for similar products must be familiar with modern software languages. Interested parties please submit your qualification similar projects done and hourly rate.
Category: Other - Engineering &...       

P****LED
 [?]
Sign in to view client's details.
| P****LED
|    South Africa
Fixed Price: Not Sure   |  Posted: May 18, 2015  |  Closed  |   1 Proposal
I am currently looking for a Fire Engineer who can provide fire services plans and specifications for a 9 unit mixed use development. Attached is the Planning Permit as well as development plans. Please provide quote and timeframe for this project. Kind regards Leanne Koster
Category: Other - Engineering &...       
Preferred Location: Australia

l****ter
 [?]
Sign in to view client's details.
| l****ter
|    Australia
Fixed Price: Not Sure   |  Posted: May 18, 2015  |  Closed  |   2 Proposals
I am currently looking for someone who can provide energy rating for 5 x 6 star residential units and provide Section J for 4 x commercial units. Attached is the Planning Permit as well as development plans. Please provide quote and timeframe for this project. Kind regards Leanne Koster
Category: Other - Engineering &...       
Preferred Location: Australia

l****ter
 [?]
Sign in to view client's details.
| l****ter
|    Australia
Fixed Price: Not Sure   |  Posted: May 18, 2015  |  Closed  |   1 Proposal
I am currently looking for a Hydraulic Engineer to provide hydraulic engineering plans and specifications for a 9 unit mixed use development. Attached is the Planning Permit as well as development plans. Please provide quote and timeframe for this project. Kind regards Leanne Koster
Category: Other - Engineering &...       
Preferred Location: Australia

l****ter
 [?]
Sign in to view client's details.
| l****ter
|    Australia
Fixed Price: Less than $500   |  Posted: May 18, 2015  |  Ends: 7d, 7h  |   5 Proposals
This is a job posting that I will be getting price quotes from many people. If the price is too low we can talk about it. The PCB should be a well designed PCB that can contain electronics seen in High-end smartphones. No printing is involved.
Category: Other - Engineering &...       
Skills: PCB Design       

R****Dev
 [?]
Sign in to view client's details.
| R****Dev
|    Hong Kong SAR, PRC
Fixed Price: Not Sure   |  Posted: May 17, 2015  |  Ends: 7d, 3h  |   3 Proposals
We are looking for our Bluetooth 4.0 and 3.0 scale to work with Chrome Browser but somehow it not connecting. We are able to connect other Bluetooth Devices with Chrome Browser   [obscured]  /apps/app_bluetooth Right now, we need to some help to debug firmware to make it work in Chrome Browser. You must be Shenzhen based to have access to factory.
Category: Other - Engineering &...       

p****pro
 [?]
Sign in to view client's details.
| p****pro
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: May 17, 2015  |  Ends: 6d, 21h  |   18 Proposals
Hi, I'm looking for someone to design a device which measures the volume of a liquid flowing in a tube with a diameter of about 2 cm. The liquid passes without pressure; for example, when the wine is poured from the bottle. It can be either mechanical or electronic. It must be accurate to two decimal places with a small tolerance; ex: 2.50 instead of 2.47 or 2.45 instead of 2.43. The device must be able to count to 5.00 and allow manual reset. The outer size must be between 40 mm diameter and 38 mm height.
Category: Other - Engineering &...       

m****ian
 [?]
Sign in to view client's details.
| m****ian
|    Italy
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 17, 2015  |  Ends: 6d, 21h  |   12 Proposals
My partner and I have been working on a new electronic product and are in need of some outside assistance. In particular we are looking for someone to help us with the electromechanical side. So far we have been working with parts purchased from adafruit.com to put together a piece of hardware capable of doing what we need. -Rasperi pi A+ -5" screen -Lio battery -Battery charge board -Small bluetooth board -Screen driver board In the research we have done it has come to our attention that custom boards can be made that can do exactly the same thing. We feel this may be our best option considering it would help keep the overall form factor of the product small, which is very important for us. Any and all applicants must be willing to sign a Nondisclosure agreement. While we are located upstate new york new poughkeepsie we are more than willing to come down to the city to complete our project. Please contact us with any questions you may have.
Category: Product Design       

p****ons
 [?]
Sign in to view client's details.
| p****ons
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 17, 2015  |  Ends: 51d, 18h  |   2 Proposals
I have recorded a vocal lead, but it sounds "just good" at best. I am seeking a "pitch correction" enginer who can modify the pitch curve of my vocal, to make it sound controlled and flawless. That is, I am not only asking for basic pitch tuning, but more advanced editing to the pitch curve, so that the vocal sounds remarkable - without the static robotic effect. It is very hard to find these types of engineers. Is this something that falls into your expertise? Contact me! Short snippet of the vocal:   [obscured]  /inherent90/demo-snippet/s-agaVJ
Category: Other - Engineering &...       

i****t90
 [?]
Sign in to view client's details.
| i****t90
|    Sweden
Fixed Price: Not Sure   |  Posted: May 17, 2015  |  Ends: 6d, 17h  |   17 Proposals
I'm looking for someone to design the prootypen of my new product. I would also like a couple models of the protoype manufactured, (if you do not handle manufacturing, perhaps you could reccomend someone to handle that end) The product I would like designed is basically something between a hair-straightening iron and a t-shirt heat press. I would like it to be a table top, clamping unit with a footprint about the size of an ipad, but the size isn't all that important. What IS important is that the clamp needs to be able to generate a LOT of pressure when closed. I'm not sure if it's even possible but I woud like the unit to be able to generate upwards of 700-800 psi. I would also like the unit to have a digital readout and adjustable temperature control in the range of 200-340* F. If this is possibe and you're up for the challenge please apply!
Category: Product Design       

c****lla
 [?]
Sign in to view client's details.
| c****lla
|    United States
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: May 17, 2015  |  Ends: 6d, 15h  |   19 Proposals
I already have a high quality 3-D printed prototype of my device, but feel that it could benefit from some additional design work. The prototype was not simply an assembly of the 3-D printed parts, as there were some customized components that the original industrial design firm incorporated into the model. I am quite pleased with the prototype. The prototype was designed in Solidworks, and could be the basis for the next round for design. I have the SolidWorks files and additional design/patent drawings that could be shared with the selected individual
Category: Product Design       
Preferred Location: North America

b****er1
 [?]
Sign in to view client's details.
| b****er1
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 17, 2015  |  Ends: 6d, 15h  |   20 Proposals
I'm looking to get a custom pcb printed with a few requirements: something i can run arduino code on (atmega or other) maximum 5/8 inch wide bluetooth adapter 3 axis motion sensor ir receiver microSD or other external memory
Category: Product Design       
Skills: PCB Design       

d****anz
 [?]
Sign in to view client's details.
| d****anz
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 17, 2015  |  Closed  |   0 Proposals
Look for a footwear company that would like to increase a footwear production of footwear. I have an idea for 2 different shoes.
Category: Product Design       
Skills: Manufacturing Design, 3D Design, footwear       

****
 [?]
Sign in to view client's details.
| Client *
|    Slovenia
Fixed Price: Not Sure   |  Posted: May 17, 2015  |  Ends: 21d, 6h  |   6 Proposals
i have multiple industrial projects that require feasibility study. please post your experience and skills to make the study for me. the first project is to manufacture many items using POLYMETHACRYLATE RESIN PMMA
Category: Other - Engineering &...       

M****dCo
 [?]
Sign in to view client's details.
| M****dCo
|    Saudi Arabia
Fixed Price: Less than $500   |  Posted: May 16, 2015  |  Ends: 6d, 2h  |   12 Proposals
Hello, What I need designed is a motion sensor message board that will light up when someone walks through a door and would have a volume controlled audio message as well. The product itself should be on the dimensions of 16cm x 8cm x 2 ? 3 cm It should be battery powered, with a sticking type paper on the back so it can stick to a wall without any problem. Is it possible?
Category: Product Design       

D****690
 [?]
Sign in to view client's details.
| D****690
|    Mauritius
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job