Save this Search
     
Sort by:
  • Posted Date
Fixed Price
Fixed Price: $1,000 - $5,000   |  Posted: 19 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
Hi, We need very specific device manufacturing (prototype + logic). Size of device must be not more then iBeacon (but here can be any server device), when some one near range of device (range is 2-3 metres), device must catch it (i mean identify it) and send signal to WiFi router or something else. Mobile Devise can be Android / IOS and we are not able to install any software to device. Probably you can catch BT or WiFi or any else signal from device. Budget is yours. At first we need ~ 100 devices. Thanks!
Category: Product Design       

C****Ltd
 [?]
Sign in to view client's details.
| C****Ltd
|    Russia
Fixed Price: $100 - $250   |  Posted: 2h, 43m ago  |  Ends: 6d, 21h  |   1 Proposal
Will email details. Basic as below ? X-Y table with 2 step motors, 100mm x 100mm, move 2mm/revolution ? Controlled by step controller: 200 steps/revolution ? PLC: Allen-Bradley Micrologic 1400, 1766-L32BXB ? Program software: RSLogix 500, use PTO Input & Output Objects Input from HMI: ? 3-Positions, (X,Y), limit 0.5-45mm (or 50 - 4500 steps) ? Buttons (5 on HMI): Position1 ? go to position (x1,y1) Position2 ? go to position (x2,y2) Position3 ? go to position (x3,y3) Stop - Home ? go to (0,0) Output on HMI: Display actual coordinate (x,y) Requirements: If x or y > 45 mm or <-45 mm, stop and send alarm; E-stop: stop X,Y and display actual coordinate (x,y) Target: Sample A-B PLC grogram (.RSS) for run.
Category: Product Design       
Skills: PLC & SCADA       

y****000
 [?]
Sign in to view client's details.
| y****000
|    United States
Fixed Price: Not Sure   |  Posted: 8h, 14m ago  |  Ends: 14d, 15h  |   6 Proposals
I will like a very good product designer than can create an innovative portable salon sink which can be easily carried around and doesn't take a lot of effort or time to setup before use. It has to be portable and lightweight, easy to setup, and is easily collapsible into a rollable case to make it easy for transport. The designs I have seen are harder to use for freelance stylists because 1) the sink takes some time to setup so has to have been setup prior to the client visit 2) once the sink is setup prior to the client visit, the product becomes bigger and harder to transport as it is now bulky 3) there is no case for the sink in its pre-setup of post-setup phase so there's no sleek/professional way for stylists to transport it into clients homes. The sink design should also factor in the need to retrieve water and to drain out water. The design of the sink, most particularly of the base of the sink, has to be innovative in order to overcome these challenges and so the product de...
Category: Product Design       

E****Bar
 [?]
Sign in to view client's details.
| E****Bar
Fixed Price: About $2,500   |  Posted: 13h, 34m ago  |  Ends: 17d, 5h  |   5 Proposals
We need a Radar system developed that is camera based. The project will require the freelancer to build a pan, tilt and zoom solution+ the detection and tracking software. Operational Specification 1)System scans the sky looking for planes (Any Kind) 2)Detect at least 10 planes at the same time 3)Assign Ids to all detected plane (  [obscured]  /watch?v=LNaL58GRou4) Something like this but for the planes. 4)Track the plane selected by the operator 5)The software needs to calculate the GPS location of the plane + altitude + Speed + Distance of the plane from the camera + expected path 6)The system will need to identify the planes by make and name 7)Have a traditional radar GUI + Show the plane( that is being tracked) on Google Maps 8)Detection range of 5Km 9)Required accuracy rate of +-10m
Category: Product Design       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    Canada
Fixed Price: $40 - $50   |  Posted: Aug 26, 2015  |  Ends: 13d, 6h  |   10 Proposals
I need mockups showing exact measurements and features of my cup designs. The final mock up files will need to be production ready. So i can just hand these files over to the manufacture. There will be two versions of this cup design. Both will be the same basic design, style and colors. The only difference in models will take place at the base of the cup. One will have a motor stir. The other will have a secret compartment. So to recap: I need two production sketches and 3d mock up of how the product will look for both versions. Examples of concept sketch:   [obscured]  /search?q=product+concept&espv=2&biw=1280&bih=658&source=lnms&tbm=isch&sa=X&ved=0CAYQ_AUoAWoVChMIp9e-s_LHxwIVCxSSCh2cgg7K#tbm=isch&q=product+concept+sketch Example of concept 3d rendering:   [obscured]  /search?q=product+concept&espv=2&biw=1280&bih=658&source=lnms&tbm=isch&sa=X&ved=0CAYQ_AUoAWoVChMIp9e-s_LHxwIVCxSSCh2cgg...
Category: Product Design       

v****man
 [?]
Sign in to view client's details.
| v****man
|    United States
Fixed Price: Not Sure   |  Posted: Aug 26, 2015  |  Ends: 13d, 5h  |   13 Proposals
I need someone who can make for me a 3D model of an idea i have. I need whatever is needed in order to start a patent and manufacturing. i have attached a basic sketch of what the design should resemble.
Category: Product Design       

t****093
 [?]
Sign in to view client's details.
| t****093 *
|    United States
Fixed Price: Less than $500   |  Posted: Aug 26, 2015  |  Ends: 12d, 20h  |   0 Proposals
The project is to manufacture; 1. a 2cmx10cm transmitter device which needs to transmit a basic signal over the range of up to 200 meters with a built in battery. The battery life could be anything from at least one hour. 2. two sets of receivers which will be placed 50 to 100 meters apart from one another to a fixed location. The receivers -by using the signal from the transmitter- has to calculate the distance between themselves and the transmitter with x,y,z coordinates using, themselves as two fixed reference points. The receivers should have a flashing red LED to indicate if and when the transmitter is 100 meters away from the receivers horizontally (y axis) and 10/15 meters away from the horizon vertically (x axis) The transmitter should have a button to voluntarily activate the red LED lights on the receivers. These products must be manufactured and dispatched to me ASAP. The payment method will be discussed.
Category: Product Design       

m****ren
 [?]
Sign in to view client's details.
| m****ren
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Aug 25, 2015  |  Ends: 12d, 0h  |   30 Proposals
I need an multifunctional iPhone 6 case designed/innovated to be presented as a final prototype. I have already had the design initially created, I want to improve it.
Category: Product Design       

l****do6
 [?]
Sign in to view client's details.
| l****do6
|    United States
Fixed Price: Not Sure   |  Posted: Aug 25, 2015  |  Ends: 11d, 18h  |   26 Proposals
We're looking a business that will design and sell mens wrist watches. We're looking for a product designer to help us create a design for our first watch. We're looking at sending this design off to our partner factory for production. Ideally, we'd like somebody familiar with the product design process and who is able to come up with something unique and extremely attractive. This will be a continuous role. We are looking to launch with 5 watches, however we would like to first get one designed. Please ensure that your quote is for 1 watch design.
Category: Product Design       

J****991
 [?]
Sign in to view client's details.
| J****991
|    Australia
Fixed Price: Not Sure   |  Posted: Aug 21, 2015  |  Ends: 8d, 2h  |   20 Proposals
We're looking for someone that can come up with a stunning bottle design for our next fragrance launch. I've attached some examples of what we are looking for. We need ideas for unique bottle designs. This will involve researching the current marketplace for niche fragrances, and using your creative talent to come up with something spectacular! Must have experience in previous product designs, and open to creating different drafts. More information will be provided. Samples of actual products are attached below, we're looking for someone that can render new creative bottle designs, which will be sent to our product engineer.
Category: Product Design       

A****oup
 [?]
Sign in to view client's details.
| A****oup
|    United States
Fixed Price: Not Sure   |  Posted: Aug 21, 2015  |  Ends: 7d, 20h  |   7 Proposals
I need help designing a product that will throw/lunch a football using compression and RFID to determine target. This support is just to build the blue print for the product and help identify the best method of achieving said goal. Below is the description of what the final product will do This device is a machine that replaces the need of having a quarterback or someone to throw a football during practice or fun. The machine throws footballs to its intended target based on RFID technology and selected patterns picked by the player. This machine give players the ability to play backyard football with as little as 2 players or can be used by a wide receiver to prefect his route running. Picture this: Four kids in backyard, One team with RED RFID wrist band that and the other team with Blue RFID wrist band. Each band is tractable by that the Elway. To start the game, each member of the red team selects a pre-programed route that he wants to run. Player 1 selects 10 yard post, Playe...
Category: Product Design       

j****kor
 [?]
Sign in to view client's details.
| j****kor
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Aug 21, 2015  |  Ends: 7d, 11h  |   10 Proposals
Conveyor Belt Scraper is very specialised product used on mine conveyor belt system. Please help us to find our potential buyers in Australia or your country.
Category: Product Design       
Skills: Engineering Design       

d****age
 [?]
Sign in to view client's details.
| d****age
|    Australia
Fixed Price: Not Sure   |  Posted: Aug 20, 2015  |  Ends: 7d, 2h  |   18 Proposals
I need help making a prototype of a clip that I already have designed. I will then take this prototype to manufactures for producing.
Category: Product Design       

b****rrb
 [?]
Sign in to view client's details.
| b****rrb
|    United States
Fixed Price: Less than $500   |  Posted: Aug 20, 2015  |  Ends: 7d, 0h  |   2 Proposals
I need some adhesive stickers made in some dimensions and in certain material and would like it done and sent within 2 days
Category: Product Design       

S****abs
 [?]
Sign in to view client's details.
| S****abs
|    Belgium
Fixed Price: Less than $500   |  Posted: Aug 20, 2015  |  Ends: 6d, 13h  |   20 Proposals
I need to make a lid the works similar to the Hydro Flask lid in functional but different look wise. If you can make it easier to clean and with good water flow, that'd be better. Also looking for a alternative to their wide mouth standard lid 2 lids to design
Category: Product Design       

D****zHI
 [?]
Sign in to view client's details.
| D****zHI *
|    United States
Fixed Price: Less than $500   |  Posted: Aug 20, 2015  |  Ends: 6d, 12h  |   14 Proposals
A one piece rubber-like wrestling headgear for ear protection. - rubber molded piece fits tight to the head with no need for Velcro strap or adjustment equipment. - stays secure through rigorous athletics. - 3 different sizes for various head types. - a "rebar"-like cup protection around ears.
Category: Product Design       

t****483
 [?]
Sign in to view client's details.
| t****483
|    United States
Fixed Price: $20,000 - $100,000   |  Posted: Aug 19, 2015  |  Ends: 6d, 6h  |   18 Proposals
I am designing a modern electronic calculator with built in functions for the energy industry. this project will involve: System requirement analysis system architecture electronic, hardware and software requirement analysis electronic, hardware and software design system test system integration electronic, hardware and software test electronic, hardware and software integration electronic construction hardware construction software construction
Category: Product Design       

M****rgy
 [?]
Sign in to view client's details.
| M****rgy
|    United States
Fixed Price: Not Sure   |  Posted: Aug 19, 2015  |  Ends: 5d, 16h  |   6 Proposals
Hi Marko You recently assisted my husband in designing a preschool furniture, including chairs, tables, cots etc. My colleague (Lize) and I would like to make use of your services in the design of toddler chairs (and tables to follow). We have developed a brief with all the details which I would like to send to you (I'm struggling to upload it to the site). Could you send me your email address? We would also like to do a quick video conference with you to explain our thinking process and discuss any questions you may have. Would you be able to look at the brief and work on a cost estimate for us? Please also let us know when you would be available to chat.... Thanks so much Regards Iris & Lize
Category: Product Design       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       

I****ize
 [?]
Sign in to view client's details.
| I****ize
|    South Africa
Fixed Price: $200 or less   |  Posted: Aug 19, 2015  |  Ends: 5d, 13h  |   24 Proposals
need 2 sheet metal wallets designed, sketches to be sent later. require both to be as flat as possible, while holding 3 cards and having a money clip on the side. there will be moving parts in both wallets, with spring loaded movements to eject each card individually. a minimum number of parts will be used. further specifications will be sent with the sketches after the job has been awarded. This job is available again due to the previous freelancer not meeting any set goals. Please be able to finish the job inside the timeframe that you set, for the price that you set. require autoCAD/Inventor drawings and model and assembly drawings, bill of materials and DXF files of each sheet metal part.
Category: Product Design       

M****ead
 [?]
Sign in to view client's details.
| M****ead
|    Australia
Fixed Price: $1,000 - $5,000   |  Posted: Aug 18, 2015  |  Ends: 5d, 3h  |   16 Proposals
Our team is designing a single serving size, collapsible blender. See my other jobs for the design proposal brief. You should have interest/experience with electrical engineering, brushless motors, food products, blade design, etc. You will work with our design team, a 3D modeler, and our factory connection to design/build a working prototype and eventually manage the engineering of the first run of production. Please provide portfolio samples and share experience!
Category: Product Design       

r****acy
 [?]
Sign in to view client's details.
| r****acy
|    United States
Fixed Price: Less than $500   |  Posted: Aug 18, 2015  |  Ends: 4d, 17h  |   14 Proposals
Hello, I am in need of custom silicon molds to be used for high volume baking of cakes. The molds will be very small and the dimensions should be approximately: Bottom: Round with a diameter of 2.5 cm Top: Round with a diameter of 3 cm Height: approximately 1.5 - 2 cm (TBD) Count: 48 cakes per mold We would like the overall dimension to be approximately 30 x 60 cm as well to fit best within the oven. First we need designs done in AutoCAD. For the quote we need time to complete and a fixed price. I will also note that we will have a variety of other designs needed shortly - so there will be future work if this goes well (boxes, plastic containers, etc) but want to use this as a first step to further work. It would also be bonus if you know suppliers for the production of the molds and get quotes. This can be a separate fee quote. Thank You Marley
Category: Product Design       
Skills: AutoCAD, silicon Molds       

M****uez
 [?]
Sign in to view client's details.
| M****uez
|    United States
Fixed Price: Less than $500   |  Posted: Aug 16, 2015  |  Ends: 2d, 22h  |   12 Proposals
I have a product called the Seed Stitcher   [obscured]  /seed-stitcher.html that has a few design issues that are causing problems. 1) After some time of use the drum of spikes becomes bound up with soil and is hard to spin. The drum is made of mold injected polycarbonate and the rest of the Seed Stitcher is steel. I'm thinking this may be fixed with a sleeve around the axle so that the drum turns on a more forgiving surface or the 3 points of contact should be redesigned so the binding does not occur. Open to any material suggestions and or redesign solutions. 2) The handle is designed to come apart for reduced shipping costs, the connection is secured once assembled with a bolt and a welded nut. The problem is the paint gets scraped badly once the handle is inserted over the male side, which will accelerate corrosion. Looking for any material or redesign solution. See pictures attached
Category: Product Design       

L****uru
 [?]
Sign in to view client's details.
| L****uru
|    United States
Fixed Price: $500 - $1,000   |  Posted: Aug 14, 2015  |  Ends: 17h, 11m  |   3 Proposals
a 7 inch tablet with inbuilt receipt printer and credit card swipe. If you have anything particular, feel free to contact me at   [obscured]   Urgent requirement
Category: Product Design       
Preferred Location: North America, Western Europe, Eastern Europe, Eastern Asia, Africa

k****wal
 [?]
Sign in to view client's details.
| k****wal
|    India
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job