Save this Search
     
Sort by:
  • Posted Date
Fixed Price: $500 - $1,500   |  Posted: 28 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
Hello, Need design schematics with proper rf shielding, interference protection circuitry for 865-867 Band with 200 KHz spread. Module should have a processor and ample memory. Lorawan (  [obscured]  /labs/zurich/ics/lrsc/lmic.html) needs to be emdedded in it. Provision for connecting to RS232 + RS485 Interface You can use sample desgin which are provided by semtech as starting point (  [obscured]  /product-search/en?vendor=0&keywords=SX1276MB1MAS) Power Requirements The offered hardwares should capable of operating on three phase supply drawn from the meter input itself. Auxiliary power supply will not be acceptable. The hardware shall have three phase AC input supply and should be capable of proper functioning within the power supply range of 77 AC P-P to 470V AC P-P, 50 Hz hardware should also be capable of operating on single phase 230V, 50 Hz power supply. The hardware shall be suitably protected against surges. Average Power consumption of th...
Category: Product Design       
Skills: Electronics, RF Design       

S****Vai
 [?]
Sign in to view client's details.
| S****Vai
|    India
Fixed Price: Less than $500   |  Posted: 4h, 3m ago  |  Ends: 14d, 19h  |   1 Proposal
Looking to get a invention put onto paper with full drawings for construction. egg shape structure which is a bed which can close electronics will be placed inside. will give further infomation on acseptance
Category: Product Design       

b****o_7
 [?]
Sign in to view client's details.
| b****o_7
|    South Africa
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: 18h, 41m ago  |  Ends: 14d, 5h  |   27 Proposals
Embedded hardware engineering support needed to assist with design iteration. Work includes schematic, layout and hardware bring-up.
Category: Product Design       

s****obs
 [?]
Sign in to view client's details.
| s****obs
|    United States
Fixed Price: Not Sure   |  Posted: Sep 02, 2015  |  Ends: 13d, 5h  |   6 Proposals
I need a complete camera case design that meets standard carry-on requirements of all airlines. General specs for carry on are 22x14x9 inches and 15#. This bag needs to safely and securely house a dji phantom 3 (including controller, charger and 2 batteries), a canon rebel t3i with a 17-40 mm lens, an 8-15 mm lens, a gopro camera and some accessories such as cables, gorillapod, feiyu wearable gimbal and battery charger. Drones are usually housed in dense foam and camera gear is usually housed in padded compartments but I cannot find a design that will house both with required specs. Example of drone storage:   [obscured]  /HPRC-HPRC2700WPHA3FO-Custom-Phantom-Black/dp/B00ZL3F2UY/ref=sr_1_1?ie=UTF8&qid=1441242471&sr=8-1&keywords=phantom+3+foam&pebp=1441242470657&perid=1HW0BBTQNFNBSJFA2MNG Example of camera storage;   [obscured]  /products/shootout-backpack-le-small-black.aspx Prefer ability to switch out camera gear as necessary; so prefer hou...
Category: Product Design       

r****a15
 [?]
Sign in to view client's details.
| r****a15
|    United States
Fixed Price: Not Sure   |  Posted: Sep 02, 2015  |  Ends: 12d, 22h  |   23 Proposals
I have an idea for a product, but can't seem to come up with the right design. I need the help of an expert to help complete the design. I will attach a list of what the product will have.
Category: Product Design       

t****093
 [?]
Sign in to view client's details.
| t****093 *
|    United States
Fixed Price: Less than $500   |  Posted: Sep 02, 2015  |  Ends: 12d, 8h  |   7 Proposals
I am looking for a manufacturer that can provide me with prototypes of an iPad case/strap made out of rubber/silicone. I have 3 professionally made 3d images bad on my design to provide you with. I can give approximate sizes but without knowing how soft or flexible the rubber/silicone material is i will need to rely on the manufacturers knowledge and help with their materials. Initially i would only be looking for 3 prototypes for the Kindle or iPad mini designs. Please contact me with an approximate price, time frame and any information you feel may be useful relating to the process.
Category: Product Design       
Skills: Manufacturing       

w****dia
 [?]
Sign in to view client's details.
| w****dia
|    Australia
Fixed Price: Less than $500   |  Posted: Sep 01, 2015  |  Ends: 12d, 2h  |   16 Proposals
We need a Rc Plane designed. The plane needs to be very similar to this one   [obscured]  /hobbyking/store/__27132__Skywalker_X_8_FPV_UAV_Flying_Wing_2120mm_.html We need CNC DFX vector files as part of the design. Further details will be shared on contact.
Category: Product Design       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    Canada
Fixed Price: About $1,500   |  Posted: Sep 01, 2015  |  Ends: 12d, 2h  |   7 Proposals
We need a Laser range finder design and produced. Requirments: 1) Portable 2) Range of 10km 3) Accuracy of +- 10m at 10km Further details will be discussed
Category: Product Design       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    Canada
Fixed Price: Not Sure   |  Posted: Sep 01, 2015  |  Ends: 26d, 21h  |   6 Proposals
I need a device created that will do the following things: - will be mounted inside of a metal box (like container) - will need to be able to read tags that are stuck on metal - reading range +-2,5m - special tags will be programmed so the device will react differently based on what tag has been read - the tags should be as cheap as possible - EUROPEAN Frequency ranges only The deliverables should be: - the device itself in working order Further details will be discussed later
Category: Product Design       

a****ldi
 [?]
Sign in to view client's details.
| a****ldi
|    Belgium
Fixed Price: More than $10,000   |  Posted: Aug 31, 2015  |  Ends: 11d, 0h  |   12 Proposals
We are looking for a talented group or company to partner with in creating this ATM machine. Top level have to features: 1) It needs to provide all the standard functionality of a normal ATM 2) Gaming feature will be focused around casino games 3) Win points to access your money at no fee For the hardware we are looking for the CD and DD design work and documents. All software development necessary for the machine and features. We are in the early stage of features and are looking for an experienced people to partner with an finish putting it all together. We understand that your bids are not final. So take the features above and give us some high end bids that can accommodate them. We need to see rough pricing and time estimates to gage which companies have experience so please be thorough.
Category: Product Design       

a****pps
 [?]
Sign in to view client's details.
| a****pps
|    United States
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: Aug 31, 2015  |  Ends: 10d, 21h  |   10 Proposals
Hi there, Our client is a manufacturer of kitchenware, and we are looking for a industry designer specialize in non-stick pan designing, we will be consulting for some advises towards non-stick pan design. It will be ideal if you are based in Canada or North America. It'd be better if you are experienced or we also can get some fresh idea from you. Feel free to summit your proposal. This project will lead to a long term corporation if satisfied. (We may ask for your LinkedIn pages to know more about you.)
Category: Product Design       
Preferred Location: North America

r****yxu
 [?]
Sign in to view client's details.
| r****yxu
|    Canada
Fixed Price: $500 - $1,000   |  Posted: Aug 31, 2015  |  Ends: 55d, 20h  |   11 Proposals
We are looking for a hardware/software developer (mechanical/electronic engineer) who can implement a complete custom project for a GPS/GSM/GPRS tracking unit for motorcycles. The units purpose is to gather GPS data and other data (live tracking, speed, distance and other common tracking features) and track the information back to a web application and alerts in mobile phone. SKILLS: Schematic Circuit Diagram, Circuit Design, Electrical Drawing, Electrical engineering, Electronic Design, Electronics, Embedded C, Embedded Systems, GPS Development, PCB Design If you DO NOT have a prior experience using GPS/GSM/GPRS module in vehicle tracking, please do not bid on this project, we would prefer to see prior work before we award the project. REQUIREMENTS: 1. Sending GPS co-ordinates to our server (GPS/GPRS) and/or SMS alerts for motion. Tracked using IMEI; 2. Have a rechargeable lithium battery. Basing your experience you can choose the best one. Long life battery is appreciated; 3. Must...
Category: Product Design       

i****ide
 [?]
Sign in to view client's details.
| i****ide
|    Brazil
Fixed Price: Less than $500   |  Posted: Aug 30, 2015  |  Ends: 10d, 3h  |   6 Proposals
Hello, I'm looking for someone extremely creative and someone who has extensive experience in the watch industry. I'm looking to put ideas together and to create prototypes, designs and mockups for a new watch brand and design. I may need the designs finalized within spec and CAD/CAM files provided in full detail....but renderings and 3d designs should be sufficient. I would like someone who is extremely talented and familiar with the fashion industry and experienced in the watch industry either by trade or from previous freelance jobs. Experience as a watchmaker is an asset. Please provide previous design and artwork in the watch field which you have created. Thanks!
Category: Product Design       

d****dzc
 [?]
Sign in to view client's details.
| d****dzc
|    Canada
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: Aug 29, 2015  |  Ends: 54d, 6h  |   6 Proposals
Task: I am looking to design a foldable yoga mat. The shape of the yoga mat has to be rectangular. The product: on one side there is the mat and on the other there will be a fabric coat that once, folded will serve as the outside of a bag. Prefer: beautiful design and compactness. Could you do three different models, one with beautiful design, one that is compact and one that has both elements? Mat material: TBA (100% natural rubber, PVC etc.) Please let me know if you have any questions and reply to confirm the receipt of this e-mail. This assignment should not take more than 45 minutes- 1 hr.
Category: Product Design       

s****er1
 [?]
Sign in to view client's details.
| s****er1 *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 29, 2015  |  Ends: 9d, 2h  |   23 Proposals
Design a simple farm produce sorting machine. I have already built a rough prototype, but now need a properly engineered, and built machine, for showmanship purposes. The machine is all mechanical expect for some electrical motors.
Category: Product Design       
Preferred Location: Canada

M****y11
 [?]
Sign in to view client's details.
| M****y11
|    Canada
Fixed Price: $1,000 - $5,000   |  Posted: Aug 28, 2015  |  Ends: 7d, 21h  |   9 Proposals
Hi, We need very specific device manufacturing (prototype + logic). Size of device must be not more then iBeacon (but here can be any server device), when some one near range of device (range is 2-3 metres), device must catch it (i mean identify it) and send signal to WiFi router or something else. Mobile Devise can be Android / IOS and we are not able to install any software to device. Probably you can catch BT or WiFi or any else signal from device. Share your budget. At first we need ~ 100 devices. Thanks!
Category: Product Design       

C****Ltd
 [?]
Sign in to view client's details.
| C****Ltd
|    Russia
Fixed Price: Not Sure   |  Posted: Aug 28, 2015  |  Ends: 7d, 13h  |   13 Proposals
I will like a very good product designer than can create an innovative portable salon sink which can be easily carried around and doesn't take a lot of effort or time to setup before use. It has to be portable and lightweight, easy to setup, and is easily collapsible into a rollable case to make it easy for transport. The designs I have seen are harder to use for freelance stylists because 1) the sink takes some time to setup so has to have been setup prior to the client visit 2) once the sink is setup prior to the client visit, the product becomes bigger and harder to transport as it is now bulky 3) there is no case for the sink in its pre-setup of post-setup phase so there's no sleek/professional way for stylists to transport it into clients homes. The sink design should also factor in the need to retrieve water and to drain out water. The design of the sink, most particularly of the base of the sink, has to be innovative in order to overcome these challenges and so the product de...
Category: Product Design       

E****Bar
 [?]
Sign in to view client's details.
| E****Bar
Fixed Price: About $2,500   |  Posted: Aug 28, 2015  |  Ends: 10d, 2h  |   7 Proposals
We need a Radar system developed that is camera based. The project will require the freelancer to build a pan, tilt and zoom solution+ the detection and tracking software. Operational Specification 1)System scans the sky looking for planes (Any Kind) 2)Detect at least 10 planes at the same time 3)Assign Ids to all detected plane (  [obscured]  /watch?v=LNaL58GRou4) Something like this but for the planes. 4)Track the plane selected by the operator 5)The software needs to calculate the GPS location of the plane + altitude + Speed + Distance of the plane from the camera + expected path 6)The system will need to identify the planes by make and name 7)Have a traditional radar GUI + Show the plane( that is being tracked) on Google Maps 8)Detection range of 5Km 9)Required accuracy rate of +-10m
Category: Product Design       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    Canada
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Aug 27, 2015  |  Ends: 22d, 4h  |   11 Proposals
Looking to manufacture custom hardware, brass, zinc, stainless, aluminum, etc. will need samples and prototype quickly. Looking for top quality only, honest and reliable.
Category: Product Design       
Preferred Location: United States

P****ere
 [?]
Sign in to view client's details.
| P****ere
|    United States
Fixed Price: Not Sure   |  Posted: Aug 26, 2015  |  Ends: 6d, 2h  |   24 Proposals
I need someone who can make for me a 3D model of an idea i have. I need whatever is needed in order to start a patent and manufacturing. i have attached a basic sketch of what the design should resemble.
Category: Product Design       

t****093
 [?]
Sign in to view client's details.
| t****093 *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 6d, 1h  |   3 Proposals
Start-up company needing services from ideation to production for a beach sandal company. Currently in the initial stages of the process. The beach sandal company will strive to be eco-friendly but fashion forward. We would like to utilize recycled products. We are looking to hire someone that has expertise in finding a manufacturer that fits our needs. We would like to manufacture in the USA.
Category: Product Design       

j****v10
 [?]
Sign in to view client's details.
| j****v10
|    United States
Fixed Price: Less than $500   |  Posted: Aug 26, 2015  |  Ends: 5d, 18h  |   1 Proposal
The project is to manufacture; 1. a 2cmx10cm transmitter device which needs to transmit a basic signal over the range of up to 200 meters with a built in battery. The battery life could be anything from at least one hour. 2. two sets of receivers which will be placed 50 to 100 meters apart from one another to a fixed location. The receivers -by using the signal from the transmitter- has to calculate the distance between themselves and the transmitter with x,y,z coordinates using, themselves as two fixed reference points. The receivers should have a flashing red LED to indicate if and when the transmitter is 100 meters away from the receivers horizontally (y axis) and 10/15 meters away from the horizon vertically (x axis) The transmitter should have a button to voluntarily activate the red LED lights on the receivers. These products must be manufactured and dispatched to me ASAP. The payment method will be discussed.
Category: Product Design       

m****ren
 [?]
Sign in to view client's details.
| m****ren
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Aug 25, 2015  |  Ends: 4d, 21h  |   33 Proposals
I need an multifunctional iPhone 6 case designed/innovated to be presented as a final prototype. I have already had the design initially created, I want to improve it.
Category: Product Design       

l****do6
 [?]
Sign in to view client's details.
| l****do6
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 25, 2015  |  Ends: 4d, 20h  |   1 Proposal
Dear Sir or Madam, I am looking for a Houston area ONLY local engineering group or engineer to observe and supervise testing at my Houston (Spring Branch) facility of a door security product to ASTM F476 (latest ver. attached). The project would require: ? some minimal initial consultancy with a site visit to inspect the construction of the test assembly and go over test day particulars, ? a visit on the test day, supervision of the actual short test (est.1/2 Day), recording of results including a failure analysis (if applicable), and ? a written report on the test and its results. This is a fun quick test for which you may wish to be paid a flat rate. Or we can engage you hourly. There may be subsequent rounds of test work or other product design or CAD work depending on your skills. Thanks in advance for your consideration, Harper Jones JONES MANUFACTURING SERVICES LLC 1511 Bingle Rd. Ste D-8 Houston Texas 77055 713.392.6990   [obscured]  
Category: Product Design       

h****s69
 [?]
Sign in to view client's details.
| h****s69
|    United States
Fixed Price: Not Sure   |  Posted: Aug 25, 2015  |  Ends: 4d, 15h  |   28 Proposals
We're looking a business that will design and sell mens wrist watches. We're looking for a product designer to help us create a design for our first watch. We're looking at sending this design off to our partner factory for production. Ideally, we'd like somebody familiar with the product design process and who is able to come up with something unique and extremely attractive. This will be a continuous role. We are looking to launch with 5 watches, however we would like to first get one designed. Please ensure that your quote is for 1 watch design.
Category: Product Design       

J****991
 [?]
Sign in to view client's details.
| J****991
|    Australia
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job