Save this Search
     

All JobsEngineering & Manufacturing

 (46,783 results)  
Sort by:
  • Posted Date
Hourly Rate: Less than $10 / hr   |  Duration: 7-9 months  |  Posted: 6 minutes ago  |  Ends: 14d, 22h  |   0 Proposals
SF Configuration and assigned projects such as implementation, integration, configuration, maintenance or administration
Category: Product Design       
Skills: .NET Framework       

A****123
 [?]
Sign in to view client's details.
| A****123
|    United States
Fixed Price: $500 - $1,000   |  Posted: 10 minutes ago  |  Ends: 6d, 22h  |   0 Proposals
Looking for additional help to complete 4 quite similar types of PBU (Prefabricated Bathroom Unit) drawings. Each set of PBU will contain 2 drawings, one architectural and one structural; this will total to 8 drawings. Base drawing support is provided, including architectural, structural and M&E layouts. Providing sample of your previous work will help. Experience in precast/prefab is preferred. For info: "A prefabricated bathroom unit refers to a bathroom unit preassembled off-site complete with finishes, sanitary wares, concealed pipes, conduits, ceiling, bathroom cabinets, shower screen and fittings before installing in position."
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

K****one
 [?]
Sign in to view client's details.
| K****one
|    Singapore
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: 16 minutes ago  |  Ends: 14d, 22h  |   0 Proposals
How to make a table of contents with Eplan P8. I want that all the page numbers, descriptions, author appear in the TABLE OF CONTENTS automatically. I inserted placeholder text into the form ICS_01C.f06. Then I tried to update in UTILITIES, REPORTS, UPDATE but a pop up message warned me that there is nothing to update. Later I tried in UTILITIES, META DATA, SYNCHRONICE and UPDATE project. At the end I didn't get that the list appear automatically.
Category: Electrical       

D****lba
 [?]
Sign in to view client's details.
| D****lba
|    United Kingdom
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: 19 minutes ago  |  Ends: 14d, 22h  |   0 Proposals
How to make a table of contents with Eplan P8. I want that all the page numbers, descriptions, author appear in the TABLE OF CONTENTS automatically. I inserted placeholder text into the form ICS_01C.f06. Then I tried to update in UTILITIES, REPORTS, UPDATE but a pop up message warned me that there is nothing to update. Later I tried in UTILITIES, META DATA, SYNCHRONICE and UPDATE project. At the end I didn't get that the list appear automatically.
Category: Electrical       

D****lba
 [?]
Sign in to view client's details.
| D****lba
|    United Kingdom
Fixed Price: Not Sure   |  Posted: 24 minutes ago  |  Ends: 14d, 22h  |   0 Proposals
Hello people, This job is about making a report about solar shadings and the impact that they have on human life and on the building. The report needs to be complex, meaning that no copy/paste, and if you get inspired from somewhere, a reference should be stated right after. The size of it has to be 30 pages. It has to be accurate and engineer-ish. I would like numbers to be included and researches. That means that the report has to dig deep into this subject of impact that the solar shadings have. The content of it I would like to be something like: - Intro (what is solar shading? what role it has? benefits ... etc.) - History (when they appear? what types of shadings exist? who used them? etc.) - Impact that has on building - Impact that has on human life - Conclusion A better explanation is attached :)
Category: Architecture       

g****lad
 [?]
Sign in to view client's details.
| g****lad
|    Denmark
Fixed Price: Not Sure   |  Posted: 1h, 42m ago  |  Ends: 14d, 21h  |   1 Proposal
We are looking to design and prototype watch bands for watches, the applicants must have experience in design and manufacturing. We are looking for someone who is interested on working on unconventional solid material something like this is   [obscured]  /collections/mens-watches/products/grey-granite is what we are looking for but would reflect our identity. please include information on your bid about previous projects that you think are similar to this one, provide data about what you propose alongside the cost
Category: Product Design       

s****007
 [?]
Sign in to view client's details.
| s****007
|    United States
Fixed Price: Less than $500   |  Posted: 3h, 0m ago  |  Ends: 14d, 19h  |   4 Proposals
Represent this circuit using a Boolean expressions and a truth table. Step 2: Implement this circuit in VHDL using data ow modelling, and using behavioural modelling. Step 3: Create a test bench and compare the simulation with your truth table. Step 4: Implement your design on the FPGA board. 1
Category: Electrical       

s****pus
 [?]
Sign in to view client's details.
| s****pus
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 3h, 5m ago  |  Ends: 14d, 19h  |   12 Proposals
Im looking to edit a model for 3d printing prototype the host file is   [obscured]  /thing:120177 [or similar will be accepted if you prefer]. Model housing will be altered to accept another component within the body
Category: 3D Modelling       
Skills: 3D       

s****ris
 [?]
Sign in to view client's details.
| s****ris
|    United Kingdom
Fixed Price: $1,000 - $2,500   |  Posted: 4h, 5m ago  |  Ends: 14d, 18h  |   2 Proposals
We are a consulting company specialized in how to deal with Managing Collective Emotions. We regularely organize workshops with our clients. In order to involve the participants in animations, we use tools to allow them to express their feelings. This is why we use emote balls with sound (like in the video attached). Since there is a sound provoked by the launch of the ball, the participants can express their feelings through these balls. Unfortuntaley, we are not able to find the company who used to prduce these balls in the past and are currently looking for a new manufacturer. We have some requirements to the balls. 1) The first one must be yellow with a smiley face and a happy sound when you throw it. (100 units) 2) The second one must be dark with an evil face and a terrific sound when you throw it. (100 units) 3) We must be able to change the battery inside of the balls. 4) The balls should be in cloth. Please find attached the short video with our current emote balls to s...
Category: Product Design       

h****any
 [?]
Sign in to view client's details.
| h****any
|    Switzerland
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: 4h, 15m ago  |  Ends: 14d, 18h  |   0 Proposals
Hello Victoria, We have some existing BIM models which were created for us some time ago. We now need to update these are we're hosting them on NBS BIM store and we have to meet their standards. If I create you access to the website so that you can download our files, can you come back to me with a cost to change the files to meet the NBS standards? I can also send you the standard if you don't already have it. I look forward to hearing from you. Thanks. Bob
Category: 3D Modelling       

b****ver
 [?]
Sign in to view client's details.
| b****ver
|    United Kingdom
Fixed Price: Less than $500   |  Posted: 4h, 17m ago  |  Ends: 14d, 18h  |   0 Proposals
Need experienced developer. Need to write a Websocket client program for ATmeg16+HLK-m30 Wifi module in C. Hardware wont be provided. Developer has to manage for HLK-m30 module. Further discussion will be done with selective bidders.
Category: Electrical       

T****ERO
 [?]
Sign in to view client's details.
| T****ERO
|    India
Fixed Price: About $20   |  Posted: 4h, 21m ago  |  Ends: 14d, 18h  |   1 Proposal
I am looking for someone who is familiar with mircochip to design a circuit which can make use of a Barcode reader on USB port and read any data which is canned. I will need firmware and schematic for the same. I will pay only once i test the complete system In next part, I will also like webcam integration on same board with another USB port. But that will be separate project,
Category: Other - Engineering &...       
Skills: Manufacturing Design, Electronics       

e****ign
 [?]
Sign in to view client's details.
| e****ign
|    India
Fixed Price: Less than $500   |  Posted: 4h, 59m ago  |  Ends: 14d, 18h  |   10 Proposals
We measure energy consumption (electricity) and use the data to identify opportunities improve efficiencies. A lot of the analysis that is being done on the data, is visual inspection. Although it is quite effective in identifying opportunities, it is time consuming and the best opportunities is often not seen. This link contains a number of example charts:   [obscured]  /presentation/d/1o2DYYNRZl9cpozpiZEDyUzhSamOn2Q-CSOmQREC7EbQ/edit#slide=id.g8c7a91103_04 It is clear from the data that energy is consumed in bands based on operational conditions. An office block would typically have two bands: 1) during office hours 2) outside of office hours. There is also a transition period. On some installations transition takes a couple of minutes, but on others the transition could be more gradual. This trend applies to almost all sites. Diagram 3 on the presentation represents readings from a single machine. It is clear that the machine is operating at times and switch off a...
Category: Other - Engineering &...       

g****ger
 [?]
Sign in to view client's details.
| g****ger
|    South Africa
Fixed Price: Less than $500   |  Posted: 6h, 0m ago  |  Ends: 6d, 16h  |   9 Proposals
Hello, I need a battery and system power management solution for a GPS tracking device that I am working on. I've been working on this for a long time, but couldn't find a proper solution. I used bq24072 - which was perfect for the job in theory. However I never achieved fast charging as it was in the theory. I tried with different circuits and batteries, the result was always insufficient. I also tried mcp73831, tp4056 and some other circuitries. As I told BQ24072 seems really perfect, but I couldn't figure out what the problem is. Anyway, you can bring a working system with bq24072 or you can provide desired functionality with anything else. As long is it works - it is ok. Characteristics: -The input voltage is 5V. -Battery should be Li-Ion or Li-po (which one you recommend for better performance and longer life) -Battery should be 3.7V and around 2000 mAh. -The system should switch to power source when external input power is on, when it is off battery should power the syste...
Category: Electrical       

m****can
 [?]
Sign in to view client's details.
| m****can
Fixed Price: Less than $500   |  Posted: 7h, 7m ago  |  Ends: 1d, 16h  |   32 Proposals
I am buying a two bedroom flat which I plan to redevelop into a three bedroom flat, and I need scale floor plans. I would like: 1) the existing floor plan to be put into Autocad and altered to correct inaccuracies (e.g. the kitchen window is in the wrong place, the chimney breast in the bedroom/bathroom is not correctly shown, and chimney breast in the reception room is also not drawn correctly). 2) a new scale floor plan to be drawn up based on the proposed floorplan. For the purposes of splitting the bathroom, please assume the stud wall is 13cm thick. 3) a floorspace calculation. I attach: a) the exsiting floorplan based on the estate agents' particulars b) the proposed floorplan - please let me know if this is not clear c) the doors & windows calculations; the key numbers here are the distance to the left and right of the windows. Windows are numbered on the floor plan measurements picture d) floor plan measurements. This may not be terribly clear; let me know if it is ...
Category: Architecture       
Skills: Architecture       

f****001
 [?]
Sign in to view client's details.
| f****001
|    United States
Fixed Price: Not Sure   |  Posted: 7h, 29m ago  |  Ends: 14d, 15h  |   17 Proposals
We are looking for a quote to do a photorealistic rendering of an office space that is approximately 1637 square feet. It has 7 offices of varying sizes, a small kitchen area, a reception and a small data closet. There is also another small waiting area beside the kitchen. There is a natural hallway that leads to 3 offices and another hallway that leads to 3 more offices. One hallway has windows on the east side of the wall and the other hallway has no windows. Materials we are using are 5" flat stock for baseboard and 3" for door and window trim. The entry way to the space will be a french door with pinreed style glass. The offices inside the space will have normal office doors. In terms of color scheme we are looking at a light grey for the walls and white for doors and trim. The flooring is a driftwood hickory color and is sourced from Home Depot Canada. The Paint is being sourced from General Paint and exact color swatches are available if necessary. Lighting is 2x2 LE...
Category: 3D Modelling       

s****002
 [?]
Sign in to view client's details.
| s****002
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 7h, 55m ago  |  Ends: 14d, 15h  |   4 Proposals
I have got 4 programs in Matlab and I am looking for an expert programmer to change some input values for each program.
Category: Other - Engineering &...       
Skills: Matlab programming       

7****d79
 [?]
Sign in to view client's details.
| 7****d79
|    United Kingdom
Fixed Price: Less than $500   |  Posted: 8h, 29m ago  |  Ends: 6d, 14h  |   19 Proposals
We would like to re-design the front entrance area of our house. We have pictures and some rough measurements and some ideas. We need someone to help us with design renderings and drawings of what you may propose and ultimately a set of drawings that we can build from. Currently, the front of the house is hidden from view from the sidewalk by a brick wall. Behind the wall is a raised area of dirt and plants. We would like to get rid of ALL the dirt, flatten out the front and make it a patio. We also would like to remove the brick wall and replace it with a fence so the house can be seen better from the street. We would like the patio to be level with the Double Doors. We would need to have a retaining wall at least up to the level of the sidewalk - which is approximately 3 feet above the bottom of the double doors. The tree in front of the front door needs to stay there - which may mean it needs to be boxed in. Everything else can go. I attach several pictures of the house as ...
Category: Architecture       

m****ung
 [?]
Sign in to view client's details.
| m****ung
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 8h, 31m ago  |  Ends: 14d, 14h  |   5 Proposals
Needing an engineer experienced in steel structures for a design of a generic steel structure for a high rise building. We are wanting to design a complete steel construction including the core using primary and secondary beam sections and a pour in place concrete flooring on steel forming sheets. FEA needed - a good understanding of current construction metholds.
Category: 3D Modelling       
Skills: 3D Modeling, 3D Design       

h****ley
 [?]
Sign in to view client's details.
| h****ley
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 8h, 50m ago  |  Ends: 14d, 14h  |   2 Proposals
Hi Dora, We corresponded a few times but i had been deployed again. I work for the dod so when i go i go and dont have too much access when im away. I was hoping to pick up where we left off. I am back for 3 weeks and would love to start and finish the project in that time
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

G****oly
 [?]
Sign in to view client's details.
| G****oly
|    Australia
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 9h, 30m ago  |  Ends: 14d, 13h  |   2 Proposals
I need a Project Manager to secure: raw material, parts, packaging, minor assembly, stickers, printed material and shipping of my product. This person must have direct access to all of these resources and wholesale / discounted prices. This is for athletic product.
Category: Contract Manufacturing       
Skills: Manufacturing Design, Manufacturing       

W****gns
 [?]
Sign in to view client's details.
| W****gns
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 9h, 30m ago  |  Ends: 29d, 13h  |   16 Proposals
We are looking for someone to assist us with the electrical engineering part of our Drone project. We are looking for someone with experience and relationships with manufacturers as well too. We are looking for partners more so than a freelancer so if you are interested in starting a long term relationship with a team that is building something big please submit proposals to us.
Category: Electrical       
Preferred Location: North America, Eastern Asia, Middle East & Central Asia

t****t15
 [?]
Sign in to view client's details.
| t****t15
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 9h, 54m ago  |  Ends: 10d, 11h  |   3 Proposals
Ok I have in mind a device that I have a vision for. The technology, potentially, could be used for many applications. I have one idea right now that would form the basis of design. **note this product involves electronic components such as market available GPS module / antenae. I am willing to pay to get a very good product, however it will be broken into sections, each with various weighting in progress payments. Meaning, no point paying the full amount only to find it isn't feasible. So I propose the following overall breakdown : 1. Investigate Phase - Investigate the components I propose or suggest alternates, with regards to achieving the specified outcome. Investigate any patents (freedom to operate), or potential for patenting this idea. Provide feedback as to whther the idea will work from a technical standpoint, and approximate costings of components, with basic design and manufacture approach. (In a nutshell, can my vision become reality with components currently availabl...
Category: Electrical       

****
 [?]
Sign in to view client's details.
| ****
|    Australia
Hourly Rate: $10 - $15 / hr   |  Duration: 3-4 weeks  |  Posted: 10h, 35m ago  |  Ends: 14d, 12h  |   6 Proposals
PCB design. Hardware product design. C51 coding. Xmega AVR design and coding. ARM7 product design and coding. ARM9 product design. Linux system design.
Category: Electrical       

s****ong
 [?]
Sign in to view client's details.
| s****ong
|    Singapore
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 10h, 51m ago  |  Ends: 14d, 12h  |   9 Proposals
Hi, We are a company providing Procurement services located in HK, and for a current proposal we are looking for someone able to design in 3D a retractor (for earphones) on the basis of a simple sketch, and make sure that it is, from an engineering perspective, workable. Plus, for a convenient reason, we are looking for people located in Hong Kong, or mainland China. If we are satisfied, we might go to you for more prototypes. Here enclosed you will find a sketch about what we are looking for. Kindest regards
Category: 3D Modelling       
Skills: 3D, 3D Modeling, 3D Printing, 3D Design, 3D Rendering       

a****psa
 [?]
Sign in to view client's details.
| a****psa
|    Hong Kong SAR, PRC
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job